Cellulose degradation by Clostridium thermocellum: from manure to molecular biology

Reassembly and co-crystallization of a family 9 processive endoglucanase from its component parts: structural and functional significance of the intermodular linker

Non-cellulosomal processive endoglucanase 9I (Cel9I) from Clostridium thermocellum is a modular protein, consisting of a family-9 glycoside hydrolase (GH9) catalytic module and two family-3 carbohydrate-binding modules (CBM3c and CBM3b), separated by linker regions. GH9 does not show cellulase activity when expressed without CBM3c and CBM3b and the presence of the CBM3c was previously shown to be essential for endoglucanase activity. Physical reassociation of independently expressed GH9 and CBM3c modules (containing linker sequences) restored 60-70% of the intact Cel9I endocellulase activity. However, the mechanism responsible for recovery of activity remained unclear. In this work we independently expressed recombinant GH9 and CBM3c with and without their interconnecting linker in Escherichia coli. We crystallized and determined the molecular structure of the GH9/linker-CBM3c heterodimer at a resolution of 1.68 Å to understand the functional and structural importance of the mutual spatial orientation of the modules and the role of the interconnecting linker during their re-association. Enzyme activity assays and isothermal titration calorimetry were performed to study and compare the effect of the linker on the re-association. The results indicated that reassembly of the modules could also occur without the linker, albeit with only very low recovery of endoglucanase activity. We propose that the linker regions in the GH9/CBM3c endoglucanases are important for spatial organization and fixation of the modules into functional enzymes.

Comparative analysis of carbohydrate active enzymes in Clostridium termitidis CT1112 reveals complex carbohydrate degradation ability

Clostridium termitidis strain CT1112 is an anaerobic, gram positive, mesophilic, cellulolytic bacillus isolated from the gut of the wood-feeding termite, Nasutitermes lujae. It produces biofuels such as hydrogen and ethanol from cellulose, cellobiose, xylan, xylose, glucose, and other sugars, and therefore could be used for biofuel production from biomass through consolidated bioprocessing. The first step in the production of biofuel from biomass by microorganisms is the hydrolysis of complex carbohydrates present in biomass. This is achieved through the presence of a repertoire of secreted or complexed carbohydrate active enzymes (CAZymes), sometimes organized in an extracellular organelle called cellulosome. To assess the ability and understand the mechanism of polysaccharide hydrolysis in C. termitidis, the recently sequenced strain CT1112 of C. termitidis was analyzed for both CAZymes and cellulosomal components, and compared to other cellulolytic bacteria. A total of 355 CAZyme sequences were identified in C. termitidis, significantly higher than other Clostridial species. Of these, high numbers of glycoside hydrolases (199) and carbohydrate binding modules (95) were identified. The presence of a variety of CAZymes involved with polysaccharide utilization/degradation ability suggests hydrolysis potential for a wide range of polysaccharides. In addition, dockerin-bearing enzymes, cohesion domains and a cellulosomal gene cluster were identified, indicating the presence of potential cellulosome assembly.

The curdlan-type exopolysaccharide produced by Cellulomonas flavigena KU forms part of an extracellular glycocalyx involved in cellulose degradation

The genus Cellulomonas is comprised of a group of Gram-positive, soil bacteria capable of utilizing cellulose as their sole source of carbon and energy. Cellulomonas flavigena KU was originally isolated from leaf litter and subsequently shown to produce large quantities of a curdlan-type (beta-1,3-glucan) exopolysaccharide (EPS) when provided with an excess of glucose or other soluble carbon-source. We report here that curdlan EPS is also produced by Cellulomonas flavigena KU when growing on microcrystalline cellulose in mineral salts-yeast extract media. Microscopic examination of such cultures shows an adherent biofilm matrix composed of cells, curdlan EPS, and numerous surface structures resembling cellulosome complexes. Those Cellulomonas species that produce curdlan EPS are all non-motile and adhere to cellulose as it is broken down into soluble sugars. These observations suggest two very different approaches towards the complex process of cellulose degradation within the genus Cellulomonas.

Cellulase, clostridia, and ethanol

Biomass conversion to ethanol as a liquid fuel by the thermophilic and anaerobic clostridia offers a potential partial solution to the problem of the world's dependence on petroleum for energy. Coculture of a cellulolytic strain and a saccharolytic strain of Clostridium on agricultural resources, as well as on urban and industrial cellulosic wastes, is a promising approach to an alternate energy source from an economic viewpoint. This review discusses the need for such a process, the cellulases of clostridia, their presence in extracellular complexes or organelles (the cellulosomes), the binding of the cellulosomes to cellulose and to the cell surface, cellulase genetics, regulation of their synthesis, cocultures, ethanol tolerance, and metabolic pathway engineering for maximizing ethanol yield.

CelI, a noncellulosomal family 9 enzyme from Clostridium thermocellum, is a processive endoglucanase that degrades crystalline cellulose

The family 9 cellulase gene celI of Clostridium thermocellum, was previously cloned, expressed, and characterized (G. P. Hazlewood, K. Davidson, J. I. Laurie, N. S. Huskisson, and H. J. Gilbert, J. Gen. Microbiol. 139:307-316, 1993). We have recloned and sequenced the entire celI gene and found that the published sequence contained a 53-bp deletion that generated a frameshift mutation, resulting in a truncated and modified C-terminal segment of the protein. The enzymatic properties of the wild-type protein were characterized and found to conform to those of other family 9 glycoside hydrolases with a so-called theme B architecture, where the catalytic module is fused to a family 3c carbohydrate-binding module (CBM3c); CelI also contains a C-terminal CBM3b. The intact recombinant CelI exhibited high levels of activity on all cellulosic substrates tested, with pH and temperature optima of 5.5 and 70 degrees C, respectively, using carboxymethylcellulose as a substrate. Native CelI was capable of solubilizing filter paper, and the distribution of reducing sugar between the soluble and insoluble fractions suggests that the enzyme acts as a processive cellulase. A truncated form of the enzyme, lacking the C terminal CBM3b, failed to bind to crystalline cellulose and displayed reduced activity toward insoluble substrates. A truncated form of the enzyme, in which both the cellulose-binding CBM3b and the fused CBM3c were removed, failed to exhibit significant levels of activity on any of the substrates examined. This study underscores the general nature of this type of enzymatic theme, whereby the fused CBM3c plays a critical accessory role for the family 9 catalytic domain and changes its character to facilitate processive cleavage of recalcitrant cellulose substrates.

Microbial cellulose utilization: fundamentals and biotechnology

Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of cellulosic biomass, taxonomic diversity, cellulase enzyme systems, molecular biology of cellulase enzymes, physiology of cellulolytic microorganisms, ecological aspects of cellulase-degrading communities, and rate-limiting factors in nature. The methodological basis for studying microbial cellulose utilization is considered relative to quantification of cells and enzymes in the presence of solid substrates as well as apparatus and analysis for cellulose-grown continuous cultures. Quantitative description of cellulose hydrolysis is addressed with respect to adsorption of cellulase enzymes, rates of enzymatic hydrolysis, bioenergetics of microbial cellulose utilization, kinetics of microbial cellulose utilization, and contrasting features compared to soluble substrate kinetics. A biological perspective on processing cellulosic biomass is presented, including features of pretreated substrates and alternative process configurations. Organism development is considered for "consolidated bioprocessing" (CBP), in which the production of cellulolytic enzymes, hydrolysis of biomass, and fermentation of resulting sugars to desired products occur in one step. Two organism development strategies for CBP are examined: (i) improve product yield and tolerance in microorganisms able to utilize cellulose, or (ii) express a heterologous system for cellulose hydrolysis and utilization in microorganisms that exhibit high product yield and tolerance. A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts.

CelE, a multidomain cellulase from Clostridium cellulolyticum: a key enzyme in the cellulosome?

CelE, one of the three major proteins of the cellulosome of Clostridium cellulolyticum, was characterized. The amino acid sequence of the protein deduced from celE DNA sequence led us to the supposition that CelE is a three-domain protein. Recombinant CelE and a truncated form deleted of the putative cellulose binding domain (CBD) were obtained. Deletion of the CBD induces a total loss of activity. Exhibiting rather low levels of activity on soluble, amorphous, and crystalline celluloses, CelE is more active on p-nitrophenyl-cellobiose than the other cellulases from this organism characterized to date. The main product of its action on Avicel is cellobiose (more than 90% of the soluble sugars released), and its attack on carboxymethyl cellulose is accompanied by a relatively small decrease in viscosity. All of these features suggest that CelE is a cellobiohydrolase which has retained a certain capacity for random attack mode. We measured saccharification of Avicel and bacterial microcrystalline cellulose by associations of CelE with four other cellulases from C. cellulolyticum and found that CelE acts synergistically with all tested enzymes. The positive influence of CelE activity on the activities of other cellulosomal enzymes may explain its relative abundance in the cellulosome.

Glycosylation of homologous immunodominant proteins of Ehrlichia chaffeensis and Ehrlichia canis

The glycoprotein genes of Ehrlichia chaffeensis (1,644 bp) and Ehrlichia canis (2,064 bp) encode proteins of 548 to 688 amino acids with predicted molecular masses of only 61 and 73 kDa but with electrophoretic mobilities of 120 kDa (P120) and 140 kDa (P140), respectively. The 120-kDa protein gene of E. chaffeensis contains four identical 240-bp tandem repeat units, and the 140-kDa protein gene of E. canis has 14 nearly identical, tandemly arranged 108-bp repeat units. Conserved serine-rich motifs identified in the repeat units of P120 and P140 were also found in the repeat units of the human granulocytotropic ehrlichiosis agent 130-kDa protein and of the fimbria-associated adhesin protein Fap1 of Streptococcus parasanguis. Nearly the entire (99%) E. chaffeensis P120 gene (1,616 bp), the 14-repeat region (78%) of the E. canis P140 gene (1,620 bp), and a 2-repeat region from the E. chaffeensis P120 gene (520 bp) were expressed in Escherichia coli. The recombinant proteins exhibited molecular masses ranging from 1.6 to 2 times larger than those predicted by the amino acid sequences. Antibodies against the recombinant proteins reacted with E. chaffeensis P120 and E. canis P140, respectively. Carbohydrate was detected on the E. chaffeensis and E. canis recombinant proteins, including the two-repeat polypeptide region of E. chaffeensis P120. A carbohydrate compositional analysis identified glucose, galactose, and xylose on the recombinant proteins. The presence of only one site for N-linked (Asn-Xaa-Ser/Thr) glycosylation, a lack of effect of N-glycosidase F, the presence of 70 and 126 Ser/Thr glycosylation sites in the repeat regions of P120 and P140, respectively, and a high molar ratio of carbohydrate to protein suggest that the glycans may be O linked.

CelG from Clostridium cellulolyticum: a multidomain endoglucanase acting efficiently on crystalline cellulose

The gene coding for CelG, a family 9 cellulase from Clostridium cellulolyticum, was cloned and overexpressed in Escherichia coli. Four different forms of the protein were genetically engineered, purified, and studied: CelGL (the entire form of CelG), CelGcat1 (the catalytic domain of CelG alone), CelGcat2 (CelGcat1 plus 91 amino acids at the beginning of the cellulose binding domain [CBD]), and GST-CBD(CelG) (the CBD of CelG fused to glutathione S-transferase). The biochemical properties of CelG were compared with those of CelA, an endoglucanase from C. cellulolyticum which was previously studied. CelG, like CelA, was found to have an endo cutting mode of activity on carboxymethyl cellulose (CMC) but exhibited greater activity on crystalline substrates (bacterial microcrystalline cellulose and Avicel) than CelA. As observed with CelA, the presence of the nonhydrolytic miniscaffolding protein (miniCipC1) enhanced the activity of CelG on phosphoric acid swollen cellulose (PASC), but to a lesser extent. The absence of the CBD led to the complete inactivation of the enzyme. The abilities of CelG and GST-CBD(CelG) to bind various substrates were also studied. Although the entire enzyme is able to bind to crystalline cellulose at a limited number of sites, the chimeric protein GST-CBD(CelG) does not bind to either of the tested substrates (Avicel and PASC). The lack of independence between the two domains and the weak binding to cellulose suggest that this CBD-like domain may play a special role and be either directly or indirectly involved in the catalytic reaction.

Role of scaffolding protein CipC of Clostridium cellulolyticum in cellulose degradation

The role of a miniscaffolding protein, miniCipC1, forming part of Clostridium cellulolyticum scaffolding protein CipC in insoluble cellulose degradation was investigated. The parameters of the binding of miniCipC1, which contains a family III cellulose-binding domain (CBD), a hydrophilic domain, and a cohesin domain, to four insoluble celluloses were determined. At saturating concentrations, about 8.2 micromol of protein was bound per g of bacterial microcrystalline cellulose, while Avicel, colloidal Avicel, and phosphoric acid-swollen cellulose bound 0.28, 0.38, and 0.55 micromol of miniCipC1 per g, respectively. The dissociation constants measured varied between 1.3 x 10(-7) and 1.5 x 10(-8) M. These results are discussed with regard to the properties of the various substrates. The synergistic action of miniCipC1 and two forms of endoglucanase CelA (with and without the dockerin domain [CelA2 and CelA3, respectively]) in cellulose degradation was also studied. Although only CelA2 interacted with miniCipC1 (K(d), 7 x 10(-9) M), nonhydrolytic miniCipC1 enhanced the activities of endoglucanases CelA2 and CelA3 with all of the insoluble substrates tested. This finding shows that miniCipC1 plays two roles: it increases the enzyme concentration on the cellulose surface and enhances the accessibility of the enzyme to the substrate by modifying the structure of the cellulose, leading to an increased available cellulose surface area. In addition, the data obtained with a hybrid protein, CelA3-CBD(CipC), which was more active towards all of the insoluble substrates tested confirm that the CBD of the scaffolding protein plays an essential role in cellulose degradation.

Characterization of the cellulolytic complex (cellulosome) produced by Clostridium cellulolyticum

The cellulolytic complex was isolated from Clostridium cellulolyticum grown on cellulose. Upon gel filtration, the complex was found to consist mainly of 600-kDa units, along with a 16-MDa aggregate. Its ability to degrade various substrates and its capacity to bind to the crystalline cellulose were measured. The results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis, N-terminal sequencing, and blotting analysis showed that all of the known cellulases of this organism are present in this complex. Three major components were observed: the first component, a noncatalytic, large (160-kDa) protein, was identified based on its ability to bind to the dockerin-containing cellulases as scaffolding protein CipC. The other two components, which had molecular masses of 94 and 80.6 kDa, were identified as CelE and CelF, respectively. The identified cellulases and some other components of the cellulosome were able to bind to a miniCipC1 construct. In addition to providing an extensive description of the system, the results of the present study confirm that the dockerin-cohesin domain interaction plays an essential role in the constitution of the cellulosome.

A new type of cohesin domain that specifically binds the dockerin domain of the Clostridium thermocellum cellulosome-integrating protein CipA

The cellulosome-integrating protein CipA, which serves as a scaffolding protein for the cellulolytic complex produced by Clostridium thermocellum, comprises a COOH-terminal duplicated segment termed the dockerin domain. This paper reports the cloning and sequencing of a gene, termed sdbA (for scaffoldin dockerin binding), encoding a protein which specifically binds the dockerin domain of CipA. The sequenced fragment comprises an open reading frame of 1,893 nucleotides encoding a 631-amino-acid polypeptide, termed SdbA, with a calculated molecular mass of 68,577 kDa. SAA comprises an NH2-terminal leader peptide followed by three distinct regions. The NH2-terminal region is similar to the NH2-terminal repeats of C. thermocellum OlpB and ORF2p. The central region is rich in lysine and harbors a motif present in Streptococcus M proteins. The COOH-terminal region consists of a triplicated sequence present in several bacterial cell surface proteins. The NH2-terminal region of SdbA and a fusion protein carrying the first NH2-terminal repeat of OlpB were shown to bind the dockerin domain of CipA. Thus, a new type of cohesin domain, which is present in one, two, and four copies in SdbA, ORF2p, and OlpB, respectively, can be defined. Since OlpB and most likely SdbA and ORF2p are located in the cell envelope, the three proteins probably participate in anchoring CipA (and the cellulosome) to the cell surface.

Non-S-layer glycoproteins in eubacteria

Glycoproteins are proving to be quite common in prokaryotes. Those in S-layers are the best understood in terms of structure. Numerous eubacteria produce non-S-layer glycoproteins about which relatively little is known. The glycans on such proteins and the nature and sites of their linkages to proteins are novel in those glycoproteins which have been examined in any detail. The possible functions of the glycans are mostly not understood. Eubacterial non-S-layer glycoproteins and the glycosylation systems producing them deserve more attention.

Multicomplex cellulase-xylanase system of Clostridium papyrosolvens C7

The cellulase system of Clostridium papyrosolvens C7 was fractionated by means of ion-exchange chromatography into at least seven high-molecular-weight multiprotein complexes, each with different enzymatic and structural properties. The molecular weights of the complexes, as determined by gel filtration chromatography, ranged from 500,000 to 660,000, and the isoelectric points ranged from 4.40 to 4.85. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of the complexes showed that each complex had a distinct polypeptide composition. Avicelase, carboxymethyl cellulase, and xylanase activity profiles differed from protein complex to protein complex. Three of the complexes hydrolyzed crystalline cellulose (Avicel). Activity zymograms of gels (following electrophoresis under mildly denaturing conditions) revealed different carboxymethyl cellulase-active proteins in all complexes but xylanase-active proteins in only two of the complexes. The xylanase specific activity of these two complexes was more than eightfold higher than that of the unfractionated cellulase preparation. A 125,000-M(r) glycoprotein with no apparent enzyme activity was the only polypeptide present in all seven complexes. Experiments involving recombination of samples eluted from the ion-exchange chromatography column indicated that synergistic interactions occurred in the hydrolysis of crystalline cellulose by the cellulase system. We propose that the C. papyrosolvens enzyme system responsible for the hydrolysis of crystalline cellulose and xylan is a multicomplex system comprising at least seven diverse protein complexes.

The biological degradation of cellulose

Cellulolytic microorganisms play an important role in the biosphere by recycling cellulose, the most abundant carbohydrate produced by plants. Cellulose is a simple polymer, but it forms insoluble, crystalline microfibrils, which are highly resistant to enzymatic hydrolysis. All organisms known to degrade cellulose efficiently produce a battery of enzymes with different specificities, which act together in synergism. The study of cellulolytic enzymes at the molecular level has revealed some of the features that contribute to their activity. In spite of a considerable diversity, sequence comparisons show that the catalytic cores of cellulases belong to a restricted number of families. Within each family, available data suggest that the various enzymes share a common folding pattern, the same catalytic residues, and the same reaction mechanism, i.e. either single substitution with inversion of configuration or double substitution resulting in retention of the beta-configuration at the anomeric carbon. An increasing number of three-dimensional structures is becoming available for cellulases and xylanases belonging to different families, which will provide paradigms for molecular modeling of related enzymes. In addition to catalytic domains, many cellulolytic enzymes contain domains not involved in catalysis, but participating in substrate binding, multi-enzyme complex formation, or possibly attachment to the cell surface. Presumably, these domains assist in the degradation of crystalline cellulose by preventing the enzymes from being washed off from the surface of the substrate, by focusing hydrolysis on restricted areas in which the substrate is synergistically destabilized by multiple cutting events, and by facilitating recovery of the soluble degradation products by the cellulolytic organism. In most cellulolytic organisms, cellulase synthesis is repressed in the presence of easily metabolized, soluble carbon sources and induced in the presence of cellulose. Induction of cellulases appears to be effected by soluble products generated from cellulose by cellulolytic enzymes synthesized constitutively at a low level. These products are presumably converted into true inducers by transglycosylation reactions. Several applications of cellulases or hemicellulases are being developed for textile, food, and paper pulp processing. These applications are based on the modification of cellulose and hemicellulose by partial hydrolysis. Total hydrolysis of cellulose into glucose, which could be fermented into ethanol, isopropanol or butanol, is not yet economically feasible. However, the need to reduce emissions of greenhouse gases provides an added incentive for the development of processes generating fuels from cellulose, a major renewable carbon source.

Nucleotide sequence of the celG gene of Clostridium thermocellum and characterization of its product, endoglucanase CelG

The nucleotide sequence of the celG gene of Clostridium thermocellum, encoding endoglucanase CelG, was determined. The open reading frame extended over 1,698 bp and encoded a 566-amino-acid polypeptide (molecular weight of 63,128) similar to the C. thermocellum endoglucanase CelB (51.5% identical residues). The N terminus displayed a typical signal peptide, followed by a catalytic domain. The C terminus, which was separated from the catalytic domain by a 25-amino-acid segment rich in Pro, Thr, and Ser, contained two conserved stretches of 22 amino acids closely similar to those previously described in other cellulases from the same organism. Expression of the gene in Escherichia coli was increased by fusing the fragment coding for the catalytic domain in frame with the start of the lacZ' gene present in the vector. A low- and a high-M(r) form of the protein were purified. The two forms displayed identical enzymatic properties. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that both forms consist of a major polypeptide of M(r) 50,000 and two minor polypeptides of M(r)s 49,000 and 48,000, resulting from heterogeneous proteolytic cleavage at the C terminus. An antiserum raised against the forms purified from E. coli reacted with an immunoreactive polypeptide of M(r) 66,000, which was associated with the extracellular cellulolytic complex of C. thermocellum known as the cellulosome.

Organization of a Clostridium thermocellum gene cluster encoding the cellulosomal scaffolding protein CipA and a protein possibly involved in attachment of the cellulosome to the cell surface

The nucleotide sequence was determined for a 9.4-kb region of Clostridium thermocellum DNA extending from the 3' end of the gene (now termed cipA), encoding the S1/SL component of the cellulosome. Three open reading frames (ORFs) belonging to two operons were detected. They encoded polypeptides of 1,664, 688, and 447 residues, termed ORF1p, ORF2p, and ORF3p, respectively. The COOH-terminal regions of the three polypeptides were highly similar and contained three reiterated segments of 60 to 70 residues each. Similar segments have been found at the NH2 terminus of the S-layer proteins of Bacillus brevis and Acetogenium kivui, suggesting that ORF1p, ORF2p, and ORF3p might also be located on the cell surface. Otherwise, the sequence of ORF1p and ORF2p gave little clue concerning their potential function. However, the NH2-terminal region of ORF3p was similar to the reiterated domains previously identified in CipA as receptors involved in binding the duplicated segment of 22 amino acids present in catalytic subunits of the cellulosome. Indeed, it was found previously that ORF3p binds 125I-labeled endoglucanase CelD containing the duplicated segment (T. Fujino, P. Béguin, and J.-P. Aubert, FEMS Microbiol. Lett. 94:165-170, 1992). These findings suggest that ORF3p might serve as an anchoring factor for the cellulosome on the cell surface by binding the duplicated segment that is present at the COOH end of CipA.