Oral implants placed in bone defects treated with Bio-Oss®, Ostim®-Paste or PerioGlas: an experimental study in the rabbit tibiae

Review on vat photopolymerization additive manufacturing of bioactive ceramic bone scaffolds

Bone defects frequently occur in clinical settings due to trauma, disease, tumors, and other causes. The clinical use of autologous bones and allograft bone, however, has several limitations, such as limited sources, donor site morbidity, and immunological rejection. Nevertheless, there is newfound hope for regenerating and repairing bone defects through the development and integration of bone tissue engineering scaffold and additive manufacturing (AM) technology, also known as 3D printing. In particular, vat photopolymerization (VPP)-AM of bioactive ceramic bone scaffolds has garnered significant interest from interdisciplinary researchers in recent years. On the one hand, VPP-AM demonstrates clear advantages in printing accuracy and speed compared to other AM and non-AM technologies. On the other hand, bioactive ceramic materials exhibit superior bioactivity, biodegradability, and mechanical properties compared to metals, polymers, and bioinert ceramics, making them one of the most promising biomaterials for developing bone scaffolds. This paper reviews the research progress of VPP-AM of bioactive ceramic bone scaffolds, covering the process principles of various VPP-AM technologies, the performance requirements and preparation process of VPP ceramic slurry, the VPP process of bioactive ceramic bone scaffolds, and the research progress on different material types of VPP bioactive ceramic scaffolds. Firstly, we provide a brief introduction to the process principles and medical applications of various VPP technologies. Secondly, we explore the composition of the VPP ceramic slurry system, discussing the function of various components and their effects on printing quality. Thirdly, we delve into the performance requirements of bone scaffolds and summarize the research progress of VPP bioactive ceramic bone scaffolds of various material types including hydroxyapatite (HA), tricalcium phosphate (TCP), bioglass (BG), etc.; Finally, we discuss the challenges currently faced by VPP-AM bioactive ceramic bone scaffolds and propose possible development directions for the future.

Sol-Gel Technologies to Obtain Advanced Bioceramics for Dental Therapeutics

The aim of this work is to review the application of bioceramic materials in the context of current regenerative dentistry therapies, focusing on the latest advances in the synthesis of advanced materials using the sol-gel methodology. Chemical synthesis, processing and therapeutic possibilities are discussed in a structured way, according to the three main types of ceramic materials used in regenerative dentistry: bioactive glasses and glass ceramics, calcium phosphates and calcium silicates. The morphology and chemical composition of these bioceramics play a crucial role in their biological properties and effectiveness in dental therapeutics. The goal is to understand their chemical, surface, mechanical and biological properties better and develop strategies to control their pore structure, shape, size and compositions. Over the past decades, bioceramic materials have provided excellent results in a wide variety of clinical applications related to hard tissue repair and regeneration. Characteristics, such as their similarity to the chemical composition of the mineral phase of bones and teeth, as well as the possibilities offered by the advances in nanotechnology, are driving the development of new biomimetic materials that are required in regenerative dentistry. The sol-gel technique is a method for producing synthetic bioceramics with high purity and homogeneity at the molecular scale and to control the surfaces, interfaces and porosity at the nanometric scale. The intrinsic nanoporosity of materials produced by the sol-gel technique correlates with the high specific surface area, reactivity and bioactivity of advanced bioceramics.

Is alveolar ridge preservation an overtreatment?

The morphology and dimensions of the postextraction alveolar ridge are important for the surgical and restorative phases of implant treatment. Adequate new bone formation and preservation of alveolar ridge dimensions following extraction will facilitate installation of the implant in a restorative position, while preservation of soft tissue contour and volume is essential for an aesthetic and implant-supported restoration with healthy peri-implant tissues. Alveolar ridge preservation (ARP) refers to any procedure that aims to: (i) limit dimensional changes in the alveolar ridge after extraction facilitating implant placement without additional extensive bone and soft tissue augmentation procedures (ii) promote new bone formation in the healing alveolus, and (iii) promote soft tissue healing at the entrance of the alveolus and preserve the alveolar ridge contour. Although ARP is a clinically validated and safe approach, in certain clinical scenarios, the additional clinical benefit of ARP over unassisted socket healing has been debated and it appears that for some clinicians may represent an overtreatment. The aim of this critical review was to discuss the evidence pertaining to the four key objectives of ARP and to determine where ARP can lead to favorable outcomes when compared to unassisted socket healing.

Bone Augmentation for Implant Placement: Recent Advances

There are various advancements in biomaterials and methods for bone augmentation. This article aims to review the recent advances in bone augmentation for dental implants. Relevant articles on bone augmentation for dental implants were searched in PubMed/Medline, Scopus, Google Scholar, and Science Direct published in English literature published between January 1996 and March 2021. Relevant studies on bone grafts for dental implants were included and critically analyzed in this review. Various biomaterials can be used to augment bone for implant placement. Each graft procedure has advantages and disadvantages in each clinical application and needs to choose the graft material with a high success rate and less morbidity.

Effect of Topical PTH 1-34 Functionalized to Biogran® in the Process of Alveolar Repair in Rats Submitted to Orchiectomy

(1) Background: There are many therapies for osteoporosis control and bone maintenance; anabolic drugs such as teriparatide and bone grafts help in the repair process and stimulate bone formation. Thus, the aim of the present study was to evaluate the behavior of repaired bone in the presence of PTH (teriparatide) associated with Biogran^® (biomaterial) through a sonochemical procedure after extraction in rats. (2) Methods: The insertion of Biogran^® with PTH in the alveolus was performed 30 days after incisor extraction. Euthanasia occurred after 60 days. (3) Results: The use of local treatment of PTH loaded with Biogran® in healthy rats promoted good results for micro-CT, with an increase in percentage and bone volume, number and trabecular separation and less total porosity. Greater immunostaining for Wnt, β-Catenin and osteocalcin proteins and lower expression for Thrombospondin-Related Adhesive Protein (TRAP), which shows an increase in the number of osteoblasts and inhibition of osteoclast action. However, the treated orchiectomized groups did not obtain such expressive results. (4) Conclusion: The use of Biogran^® with PTH improved alveolar repair in rats. However, new researches with more efficient doses must be studied to collaborate effectively with the formation of a quality bone after the orchiectomy.

Bone Formation in Grafts with Bio-Oss and Autogenous Bone at Different Proportions in Rabbit Calvaria

Background

The aim of this study was to assess the volumetric stability and bone formation in grafts with Bio-Oss and autogenous bone at different proportions in rabbit calvaria. Material and Methods. Ten rabbits received four titanium cylinders in their calvaria and randomly divided into the following groups: Group I: Bio-Oss (100%), Group II: Bio-Oss (75%) + autogenous bone (25%), Group III: Bio-Oss (50%) + autogenous bone (50%), and Group IV: autogenous bone (100%). After twelve weeks, the animals were euthanized, and samples were collected for clinical and histological analysis.

Results

Clinical analysis showed that Groups I (90.43 ± 8.99) and II (90.87 ± 7.43) had greater dimensional stability compared to Group IV (P=0.0005). Histologically, Groups I, II, and III showed areas of bone formation with particles of biomaterial remaining in close contact with the newly formed bone. However, there were no significant differences between the groups regarding the newly formed bone area.

Conclusion

It was concluded that the use of Bio-Oss either alone or associated with the autogenous bone at a proportion of 25% showed superior dimensional stability compared to the use of autogenous bone in the proposed experimental model.

Effect of SDF-1 with biphasic ceramic-like bone graft on the repair of rabbit radial defect

BACKGROUND

This study aimed to investigate the effects of stromal cell-derived factor-1 (SDF-1) on biphasic ceramic-like biologic bone (BCBB) in vivo on the repair of large segment bone defect in rabbits.

METHODS

A large-segment radius defect model of the rabbits was constructed. In the experimental group, BCBB with SDF-1 sustained-release system were implanted into the bone defect site. Other three groups including normal control, autologous bone graft, and BCBB implantation without SDF-1 were set. After surgery, general observation, X-ray radiography and scoring, and tissue section staining were performed at 2, 4, 8, 12, and 24 weeks post-implantation.

RESULTS

By general observation, X-ray radiography and grading and tissue section staining observation, we found that the BCBB carrying SDF-1 was better than those in the group of BCBB without SDF-1 (P < 0.05). BCBB scaffold had certain bone conduction capacity, and the BCBB scaffold carrying SDF-1 had improved bone conduction ability and possessed bone induction ability. In the case of carrying SDF-1, it can be used to repair large bone defects in a shorter time than simply using BCBB, which is equivalent to the effect of autologous bone.

CONCLUSION

BCBB scaffold carrying SDF-1 can promote the repair effect on a large bone defect, which is equivalent to the effect of autologous bone.

A bioactive nano-calcium phosphate paste for in-situ transfection of BMP-7 and VEGF-A in a rabbit critical-size bone defect: results of an in vivo study

The aim of this study was to prepare an injectable DNA-loaded nano-calcium phosphate paste that is suitable as bioactive bone substitution material. For this we used the well-known potential of calcium phosphate in bone contact and supplemented it with DNA for the in-situ transfection of BMP-7 and VEGF-A in a critical-size bone defect. 24 New Zealand white rabbits were randomly divided into two groups: One group with BMP-7- and VEGF-A-encoding DNA on calcium phosphate nanoparticles and a control group with calcium phosphate nanoparticles only. The bone defect was created at the proximal medial tibia and filled with the DNA-loaded calcium phosphate paste. As control, a bone defect was filled with the calcium phosphate paste without DNA. The proximal tibia was investigated 2, 4 and 12 weeks after the operation. A histomorphological analysis of the dynamic bone parameters was carried out with the Osteomeasure system. The animals treated with the DNA-loaded calcium phosphate showed a statistically significantly increased bone volume per total volume after 4 weeks in comparison to the control group. Additionally, a statistically significant increase of the trabecular number and the number of osteoblasts per tissue area were observed. These results were confirmed by radiological analysis. The DNA-loaded bone paste led to a significantly faster healing of the critical-size bone defect in the rabbit model after 4 weeks. After 12 weeks, all defects had equally healed in both groups. No difference in the quality of the new bone was found. The injectable DNA-loaded calcium phosphate paste led to a faster and more sustained bone healing and induced an accelerated bone formation after 4 weeks. The material was well integrated into the bone defect and new bone was formed on its surface. The calcium phosphate paste without DNA led to a regular healing of the critical-size bone defect, but the healing was slower than the DNA-loaded paste. Thus, the in-situ transfection with BMP-7 and VEGF-A significantly improved the potential of calcium phosphate as pasty bone substitution material.

Bone repair induced by different bone graft substitutes in critical-sized defects in rat calvaria

Abstract Introduction The use of bone substitutes in grafting procedures as an alternative of the use of autogenous bone graft has been indicated, however, the direct comparison between these biomaterials has been little explored. Objective To evaluate the effect of different osteoconductive bone substitutes on the bone repair in critical-sized defects (CSDs) in rat calvaria. Material and method One CSD with an 8 mm diameter was made in each of the 40 rats used in this study. The animals were randomly allocated into 5 groups (n=8), according to the type of bone substitute used to fill the CSD: COA (Coagulum); AUT (autogenous bone); DBB (deproteinized bovine bone graft); HA/TCP (biphasic ceramic composed of hydroxyapatite and β-phosphate tricalcium); and TCP (β-phosphate tricalcium). A microtomographic analysis was performed to evaluate the remaining defect linear length (DLL) of the CSD and the volume of the mineralized tissues (MT) within the CSD at 3, 7, 15 and 30 days after the surgical procedure. In addition, a histometric analysis was performed to evaluate the composition of the repaired bone tissue (% Bone and % Biomaterial) at the 30-day period. Result It was shown that the COA had the lowest DLL and MT within the CSD. In addition, the COA presented the highest % of bone in CSD. The DBB had a higher MT and a higher % of bone substitute particles in the CSD than the AUT and TCP groups. The DBB and AUT groups presented higher % of bone in the CSD than the TCP group. Conclusion The use of the DBB promoted a better pattern of bone volume gain and formation compared to TCP and HA / TCP but was biologically inferior to the AUT.

Impact of Inorganic Xenograft on Bone Healing and Osseointegration: An Experimental Study in Rabbits

PURPOSE

To evaluate if an inorganic graft applied before implant insertion interferes with osseointegration.

MATERIALS AND METHODS

The bilateral mandibular incisors of 12 rabbits were extracted. One of the sockets was randomly filled with an inorganic xenogenic bone graft, whereas the remaining socket was allowed to heal naturally and served as a control. After 60 days, titanium implants were inserted into healing areas. The animals were killed 60 days after. Bone depositions were marked with fluorochrome oxytetracycline, alizarin, and calcein and evaluated using confocal laser scanning microscopy. Bone-to-implant contact (BIC) and bone area (BA) within the limits of the implant threads were analyzed. Data were compared statically by paired t tests, one-way ANOVA, and Bonferroni post hoc tests (α = 0.05).

RESULTS

No differences between the control and experimental groups in bone deposition for each marker, in either the BIC or BA analysis were observed. The bone deposition marked by alizarin (14-21 days) was the highest, followed by oxytetracycline (0 and 7 days) and calcein (45 and 52 days) in both groups (P < 0.05).

CONCLUSION

The bone healing or the course of osseointegration was not impaired by the use of an inorganic xenogenic graft before insertion of a titanium implant.

Animal models for periodontal regeneration and peri-implant responses

Translation of experimental data to the clinical setting requires the safety and efficacy of such data to be confirmed in animal systems before application in humans. In dental research, the animal species used is dependent largely on the research question or on the disease model. Periodontal disease and, by analogy, peri-implant disease, are complex infections that result in a tissue-degrading inflammatory response. It is impossible to explore the complex pathogenesis of periodontitis or peri-implantitis using only reductionist in-vitro methods. Both the disease process and healing of the periodontal and peri-implant tissues can be studied in animals. Regeneration (after periodontal surgery), in response to various biologic materials with potential for tissue engineering, is a continuous process involving various types of tissue, including epithelia, connective tissues and alveolar bone. The same principles apply to peri-implant healing. Given the complexity of the biology, animal models are necessary and serve as the standard for successful translation of regenerative materials and dental implants to the clinical setting. Smaller species of animal are more convenient for disease-associated research, whereas larger animals are more appropriate for studies that target tissue healing as the anatomy of larger animals more closely resembles human dento-alveolar architecture. This review focuses on the animal models available for the study of regeneration in periodontal research and implantology; the advantages and disadvantages of each animal model; the interpretation of data acquired; and future perspectives of animal research, with a discussion of possible nonanimal alternatives. Power calculations in such studies are crucial in order to use a sample size that is large enough to generate statistically useful data, whilst, at the same time, small enough to prevent the unnecessary use of animals.

Hydraulic sinus lift technique in future site development: clinical and histomorphometric analysis of human biopsies

PURPOSE

The fluid-dynamic technique is characterized by the hydraulic detachment of the mucosa and simultaneous filling of the sub-Schneiderian space, with a graft material of paste-like consistency.

MATERIALS AND METHODS

Authors performed 13 future site developments, on as many patients (4 men; 9 women; age 49.46 ± 12.44 years), using a nanocrystalline hydroxyapatite dispersed in an aqueous matrix as graft material. In the second stage, performed at 5.96 ± 1.72 months, 13 implants were placed after harvesting bone biopsies from the regenerated sites. The above samples were subjected to histological and histomorphometric analysis. The histomorphometric results were then compared with the bone density, measured in Hounsfield units.

RESULTS

The average percentage of vital bone was of 29.08% ± 14.7%, whereas the bone marrow and graft material were 59.75% ± 11.19% and 11.16% ± 10.88%, respectively. The percentage of vital bone has a significant correlation with the bone density of the recipient site (P = 0.003117). In contrast, the bone marrow (P = 0.08692) and the graft (P = 0.0799) do not show a significant correlation with this parameter.

CONCLUSIONS

The results suggest the validity of the method in the regeneration of bone volume in the subantral region.

Changes in actin and tubulin expression in osteogenic cells cultured on bioactive glass-based surfaces

The present study evaluated whether the changes in the labeling pattern of cytoskeletal proteins in osteogenic cells cultured on bioactive glass-based materials are due to altered mRNA and protein levels. Primary rat-derived osteogenic cells were plated on Bioglass® 45S5, Biosilicate®, and borosilicate (bioinert control). The following parameters were assayed: (i) qualitative epifluorescence analysis of actin and tubulin; (ii) quantitative mRNA and protein expression for actin and tubulin by real-time PCR and ELISA, respectively, and (iii) qualitative analysis of cell morphology by scanning electron microscopy (SEM). At days 3 and 7, the cells grown on borosilicate showed typical actin and tubulin labeling patterns, whereas those on the bioactive materials showed roundish areas devoid of fluorescence signals. The cultures grown on bioactive materials showed significant changes in actin and tubulin mRNA expression that were not reflected in the corresponding protein levels. A positive correlation between the mRNA and protein as well as an association between epifluorescence imaging and quantitative data were only detected for the borosilicate. SEM imaging of the cultures on the bioactive surfaces revealed cells partly or totally coated with material aggregates, whose characteristics resembled the substrate topography. The culturing of osteogenic cells on Bioglass® 45S5 and Biosilicate® affect actin and tubulin mRNA expression but not the corresponding protein levels. Changes in the labeling pattern of these proteins should then be attributed, at least in part, to the presence of a physical barrier on the cell surface as a result of the material surface reactions, thus limiting fluorescence signals.

Bone formation in mono cortical mandibular critical size defects after augmentation with two synthetic nanostructured and one xenogenous hydroxyapatite bone substitute - in vivo animal study

OBJECTIVES

Healing characteristics as well as level of tissue integration and degradation of two different nanostructured hydroxyapatite bone substitute materials (BSM) in comparison with a deproteinized hydroxyapatite bovine BSM were evaluated in an in vivo animal experiment.

MATERIAL AND METHODS

In the posterior mandible of 18 minipigs, bilateral mono cortical critical size bone defects were created. Randomized augmentation procedures with NanoBone(®) (NHA1), Ostim(®) (NHA2) or Bio-Oss(®) (DBBM) were conducted (each material n = 12). Samples were analyzed after five (each material n = 6) and 8 months (each material n = 6). Defect healing, formation of soft tissue and bone as well as the amount of remaining respective BSM were quantified both macro- and microscopically.

RESULTS

For NHA2, the residual bone defect after 5 weeks was significantly less compared to NHA1 or DBBM. There was no difference in residual BSM between NHA1 and DBBM, but the amount in NHA2 was significantly lower. NHA2 also showed the least amount of soft tissue and the highest amount of new bone after 5 weeks. Eight months after implantation, no significant differences in the amount of residual bone defects, in soft tissue or in bone formation were detected between the groups. Again, NHA2 showed significant less residual material than NHA1 and DBBM.

DISCUSSION

We observed non-significant differences in the biological hard tissue response of NHA1 and DBBM. The water-soluble NHA2 initially induced an increased amount of new bone but was highly compressed which may have a negative effect in less stable augmentations of the jaw.

Copaiba oil effect on experimental jaw defect in Wistar rats

PURPOSE

To evaluate the effects of copaiba oil on jaw defects repair in Wistar rats treated with bioglass or adipose tissue.

METHODS

A jaw defect was randomly created in forty-two rats and filled with bioglass or adipose tissue. The two groups (Gbio and Gcell) were subdivided in three subgroups with seven animals each according to gavage administration: control (distillated water), oil (copaiba oil) and melox (meloxicam). Euthanasia was performed after forty post-operative days. The bone formation was analyzed regarding the histological aspects.

RESULTS

The osteoclasts activity was observed only in four subgroups (p=0.78). Regarding the osteoblasts presence, it was very similar between the subgroups, the difference was due to Gcell-melox (p=0.009) that presented less osteoblastic activity. The inflammatory cells were more evident in Gcell-melox subgroup, however, there was no difference in comparison with the other subgroups (p=0.52). Bone formation was observed in all subgroups, just two animals showed no bone formation even after 40 days. More than 50% of bone matrix mineralization was observed in 56% (23 animals) of the analyzed areas. The bone matrix mineralization was not different between subgroups (p=0.60).

CONCLUSIONS

The subgroups that received copaiba oil showed bone repair, although not statistically significant in comparison to subgroups treated with meloxicam or controls. Copaiba oil administered by gavage had no effect on bone repair in this experimental model.

Avaliação histomorfométrica da associação entre biovidro e osso bovino liofilizado no tratamento de defeitos ósseos críticos criados em calvárias de ratos. Estudo piloto

OBJETIVO: Avaliar histomorfometricamente o efeito de biovidro (B), osso bovino liofilizado (OB) ou da mistura desses dois biomateriais (B/OB - 1:1) no reparo de defeitos ósseos críticos em calvária de ratos. MATERIAL E MÉTODO: Defeitos ósseos (8 mm Ø) foram criados cirurgicamente na calvária de 24 ratos, distribuídos em 4 grupos com 6 animais, de acordo com o tipo de biomaterial: coágulo sanguíneo (GC), biovidro (GB), osso bovino liofilizado (GOB) e a mistura desses dois biomateriais (GB/OB). Os animais foram eutanasiados após 15 e 60 dias do procedimento cirúrgico (3 animais por período). A avaliação histológica foi baseada na descrição da morfologia dos tecidos neoformados, enquanto para a avaliação histomorfométrica foi realizada quantificação da porcentagem de tecido ósseo, de tecido conjuntivo fibroso neoformados e de biomaterial remanescente no defeito ósseo. RESULTADO: Nos dois períodos experimentais, a análise histológica apresentou neoformação óssea, principalmente nas bordas dos defeitos, e ao redor de partículas de biomateriais remanescentes. A avaliação histomorfométrica demonstrou que no período de 15 dias o grupo GC apresentou maior percentagem de tecido ósseo em relação aos demais grupos estudados, enquanto que aos 60 dias o grupo GOB apresentou maior porcentagem de tecido ósseo em relação ao grupo GB. CONCLUSÃO: O osso bovino liofilizado apresentou maior formação óssea em relação ao biovidro, mas nenhum dos biomateriais foi superior ao coágulo. A associação do biovidro e osso bovino liofilizado não adicionou vantagem à formação óssea.

Immunohistochemical analysis of staged guided bone regeneration and osseointegration of titanium implants using a polyethylene glycol membrane

OBJECTIVES

This study aimed to immunohistochemically evaluate staged guided bone regeneration and osseointegration of titanium implants using two bone graft substitutes in combination with a polyethylene glycol (PEG) membrane in a dog model.

MATERIALS AND METHODS

Saddle-type alveolar ridge defects were prepared in the lower jaws of 12 foxhounds and randomly filled with a natural bone mineral (NBM) or a biphasic calcium phosphate (SBC) and covered with an in situ gelling PEG membrane. After a healing period of 8 and 12 weeks (six animals each), modSLA titanium implants were inserted to heal in a submerged position. At 8 + 2 and 12 + 2 weeks, respectively, dissected blocks were processed for immunohistochemical analysis [osteocalcin (OC)].

RESULTS

After 8 + 2 weeks, mean OC values (%) tended to be higher in the NBM group (NBM, 32.7 ± 8.9%), but failed to reach statistical significance over the SBC group (SBC, 24.4 ± 6.6%). After 12 + 2 weeks, mean OC values decreased in both groups and was almost identical in both groups (NBM 1.6 ± 1.2%/SBC 2.1 ± 1.4%).

CONCLUSION

It was concluded that all augmentation procedures investigated were characterised by a comparable OC activity during the process of bone regeneration and osseointegration of modSLA titanium implants.

The rabbit as experimental model for research in implant dentistry and related tissue regeneration

The use of rabbits for experimental research has a long historical tradition. The aim of this review consists in outlining the use of the rabbit for research in implant dentistry and related tissue regeneration. Rabbits appear as a first-hand choice for fundamental implant design studies because of their size, easy handling, short life span, and economical aspects in purchasing and sustaining. In the following, the various anatomical sites in the rabbit will be summarized to provide an overview of current possibilities and limitations of this model for bone research in oral implantology.

Systematic review of pre-clinical models assessing implant integration in locally compromised sites and/or systemically compromised animals

OBJECTIVE

The aim was to systematically search the dental literature for pre-clinical models assessing implant integration in locally compromised sites (part 1) and systemically compromised animals (part 2), and to evaluate the quality of reporting of included publications.

METHODS

A Medline search (1966-2011) was performed, complimented by additional hand searching. The quality of reporting of the included publications was evaluated using the 20 items of the ARRIVE (Animals in Research In Vivo Experiments) guidelines.

RESULTS

One-hundred and seventy-six (part 1; mean ARRIVE score = 15.6 ± 2.4) and 104 (part 2; 16.2 ± 1.9) studies met the inclusion criteria. The overall mean score for all included studies amounted to 15.8 ± 2.2. Housing (38.3%), allocation of animals (37.9%), numbers analysed (50%) and adverse events (51.4%) of the ARRIVE guidelines were the least reported. Statistically significant differences in mean ARRIVE scores were found depending on the publication date (p < 0.05), with the highest score of 16.7 ± 1.6 for studies published within the last 2 years.

CONCLUSIONS

A large number of studies met the inclusion criteria. The ARRIVE scores revealed heterogeneity and missing information for selected items in more than 50% of the publications. The quality of reporting shifted towards better-reported pre-clinical trials within recent years.

Tissue changes of extraction sockets in humans: a comparison of spontaneous healing vs. ridge preservation with secondary soft tissue healing

INTRODUCTION

As a consequence of extraction, the height of the buccal wall tends to decrease and results in the disappearance of bundle bone. To modify bone remodelling after extraction, various ridge preservation techniques have been proposed. The present research was drawn up with the following considerations in mind: to evaluate and to compare changes of hard and soft tissues in post-extraction sockets which received a ridge preservation procedure, with post-extraction sockets which had healed naturally.

MATERIALS AND METHODS

Each patient was randomly allocated to a test or control group using a specific software package. After extraction, the sockets were carefully inspected and any granulation tissue was removed. The control sites received silk sutures to stabilize the clot without any grafting material. The test sites were grafted with corticocancellous porcine bone and a collagen membrane. All experimental sites had the membranes left exposed to the oral cavity with a secondary wound healing. The thickness of the buccal alveolar bone, if present, was carefully measured at the time of tooth extraction using a calliper at 1 mm from the edge of the wall. The following clinical parameters were evaluated at baseline and after 4 months at implant placement: vertical bone changes, horizontal bone changes and width of keratinized gingiva. The length, diameter and need for additional bone augmentation were assessed for both groups at the time of implant insertion.

RESULTS

The control group showed vertical bone resorption of 1 ± 0.7 mm, 2.1 ± 0.6 mm, 1 ± 0.8 mm and 2 ± 0.73 mm at the mesial, vestibular, distal and lingual sites respectively. Moreover, changes in horizontal dimension showed an average resorption of 3.6 ± 0.72 mm. The test sites showed a horizontal bone remodelling of 0.3 ± 0.76 mm, 1.1 ± 0.96 mm, 0.3 ± 0.85 mm, 0.9 ± 0.98 mm at the mesial, vestibular, distal and lingual sites respectively. The horizontal bone resorption at the test sites was 1.6 ± 0.55 mm. The keratinized gingiva showed a coronal shift of 0.7 mm in the control group when compared to 1.1 mm in the test group. In addition, 42% of sites in the control group required an additional bone augmentation at implant placement, when compared to 7% in the test sites.

CONCLUSIONS

This study clearly points out that an alveolar ridge preservation technique performed with collagenated porcine bone and a resorbable membrane--according to the procedure reported in this study--was able to limit the contour changes after tooth extraction. Finally, the test sites showed a better preservation of facial keratinized tissue when compared to control sites; grafted sites allowed the placement of longer and wider implants when compared to implants inserted in non-grafted sites.

Using cell and organ culture models to analyze responses of bone cells to mechanical stimulation

Bone cells of the osteoblastic lineage are responsive to the local mechanical environment. Through integration of a number of possible loading-induced regulatory stimuli, osteocyte, osteoblast, and osteoclast behaviour is organized to fashion a skeletal element of sufficient strength and toughness to resist fracture and crack propagation. Early pre-osteogenic responses had been determined in vivo and this led to the development of bone organ culture models to elucidate other pre-osteogenic responses where osteocytes and osteoblasts retain the natural orientation, connections and attachments to their native extracellular matrix. The application of physiological mechanical loads to bone in these organ culture models generates the regulatory stimuli. As a consequence, these experiments can be used to illustrate the distinctive mechanisms by which osteocytes and osteoblasts respond to mechanical loads and also differences in these responses, suggesting co-ordinated and cooperatively between cell populations. Organ explant cultures are awkward to maintain, and have a limited life, but length of culture times are improving. Monolayer cultures are much easier to maintain and permit the application of a particular mechanical stimulation to be studied in isolation; mainly direct mechanical strain or fluid shear strains. These allow for the response of a single cell type to the applied mechanical stimulation to be monitored precisely.The techniques that can be used to apply mechanical strain to bone and bone cells have not advanced greatly since the first edition. The output from such experiments has, however, increased substantially and their importance is now more broadly accepted. This suggests a growing use of these approaches and an increasing awareness of the importance of the mechanical environment in controlling normal bone cell behaviour. We expand the text to include additions and modifications made to the straining apparatus and update the research cited to support this growing role of cell and organ culture models to analyze responses of bone cells to mechanical stimulation.

Clinical-radiographic and histological evaluation of two hydroxyapatites in human extraction sockets: a pilot study

After tooth extraction the healing process involves bone resorption and soft tissue contraction, events that can compromise the ideal implant placement with functional and aesthetic limitations. Following tooth extraction, a socket preservation technique can limit bone resorption. This study evaluated two different types of hydroxyapatite (HA) grafting materials placed into fresh extraction sockets, 6 months after tooth extraction, histologically, clinically and radiographically. Ten extraction sockets from 10 patients were divided in two groups: 5 sockets received a biomimetic HA and 5 received nanocrystalline HA. After 6 months, before implant placement, samples from the grafted area were harvested and evaluated clinically, radiographically and histologically. The percentages of bone, osteoid areas and residual material in the two groups were not statistically different. All samples showed great variability with extensive bone formation and total material resorption or amounts of osteoid tissue that filled the spaces between the residual material particles. The authors did not find any differences between biomimetic and nanocrystalline HA and assume that, within the limits of this study, both these materials could be applied into fresh extraction sockets to limit bone resorption. A control material and a much larger sample size are needed to confirm these findings.

Nanocrystalline hydroxyapatite for bone repair: an animal study

Abstract Hydroxyapatite has become the most common material to replace bone or to guide its regeneration. Nanocrystalline hydroxyapatite suspension had been introduced in the clinical use recently under the assumption that small dimension of crystals could improve resorption. We studied the resorption and osteointegration of the nanocrystalline hydroxyapatite Ostim in a rabbit model. The material was implanted either alone or in combination with autogenic or allogenic bone into distal rabbit femora. After survival time of 2, 4, 6, 8 and 12 weeks the implants had been evaluated by light and electron microscopy. We observed a direct bone contact as well as inclusion into soft tissue. But we could observe no or only marginal decay and no remarkable resorption in the vast majority of implants. In situ the nanocrystalline material mostly formed densely packed agglomerates which were preserved once included in bone or connective tissue. A serious side effect was the initiation of osteolysis in the femora far from the implantation site causing extended defects in the cortical bone.

Efficacy of a bioactive glass-ceramic (Biosilicate) in the maintenance of alveolar ridges and in osseointegration of titanium implants

OBJECTIVES

The aims of this research were to evaluate the efficacy of a bioactive glass-ceramic (Biosilicate) and a bioactive glass (Biogran) placed in dental sockets in the maintenance of alveolar ridge and in the osseointegration of Ti implants.

MATERIAL AND METHODS

Six dogs had their low premolars extracted and the sockets were implanted with Biosilicate, Biogran particles, or left untreated. After the extractions, measurements of width and height on the alveolar ridge were taken. After 12 weeks a new surgery was performed to take the final ridge measurements and to insert bilaterally three Ti implants in biomaterial-implanted and control sites. Eight weeks post-Ti implant placement block biopsies were processed for histological and histomorphometric analysis. The percentages of bone-implant contact (BIC), of mineralized bone area between threads (BABT), and of mineralized bone area within the mirror area (BAMA) were determined.

RESULTS

The presence of Biosilicate or Biogran particles preserved alveolar ridge height without affecting its width. No significant differences in terms of BIC, BAMA, and BABT values were detected among Biosilicate, Biogran, and the non-implanted group.

CONCLUSIONS

The results of the present study indicate that filling of sockets with either Biosilicate or Biogran particles preserves alveolar bone ridge height and allows osseointegration of Ti implants.