Alveolar ridge augmentation using implants coated with recombinant human growth/differentiation factor -5 (rhGDF-5). Radiographic observations

BMP Gene-Immobilization to Dental Implants Enhances Bone Regeneration

For individuals who have experienced tooth loss, dental implants are an important treatment option for oral reconstruction. For these patients, alveolar bone augmentation and acceleration of osseointegration optimize implant stability. Traditional oral surgery often requires invasive procedures, which can result in prolonged treatment time and associated morbidity. It has been previously shown that chemical vapor deposition (CVD) polymerization of functionalized [2.2]paracyclophanes can be used to anchor gene encoding vectors onto biomaterial surfaces and local delivery of a bone morphogenetic protein (BMP)-encoding vector can increase alveolar bone volume and density in vivo. This study is the first to combine the use of CVD technology and BMP gene delivery on titanium for the promotion of bone regeneration and bone to implant contact in vivo. BMP-7 tethered to titanium surface enhances osteoblast cell differentiation and alkaline phosphatase activity in vitro and increases alveolar bone regeneration and % bone to implant contact similar to using high doses of exogenously applied BMP-7 in vivo. The use of this innovative gene delivery strategy on implant surfaces offers an alternative treatment option for targeted alveolar bone reconstruction.

Recombinant factors for periodontal intrabony defects: A systematic review and network meta-analysis of preclinical studies

The use of bioactive agents combined with osteoconductive scaffolds for the regeneration of periodontal intrabony defects has been the subject of intensive research in the past 20 years. Most studies reported that such agents, used in different concentrations, doses and combined with various scaffolds, might promote periodontal tissue regeneration, but evidence for the most effective combination of such agents is lacking. The objective of this study 13 was to rank the different combinations of recombinant human-derived growth and differentiation factors with/without scaffold biomaterial in the treatment of periodontal intrabony defects, through network meta-analysis of pre-clinical studies. The systematic review and network meta-analysis protocol was registered on the PROSPERO Systematic Review database with reference number: CRD42021213673. Relevant published articles were obtained after searching five electronic databases. A specific search strategy was followed by using keywords related to intrabony defects, regenerative materials, scaffolds and recombinant factors, and animal studies. All pre-clinical studies used for periodontal regeneration were included. The primary outcomes were: regeneration of junctional epithelium (mm), new cementum, connective tissue attachment, percentage of new bone formation (%), bone area (mm² ), bone volume density (g/cm³ ) and bone height (mm) data was extracted. The analysis was carried out using network meta-analysis methods, that is illustrating network plots, contribution plots, predictive and confidence interval plot, surface under the cumulative ranking (SUCRA), multidimensional scale ranking and net funnel plots using STATA IC statistical software. An SYRCLE's tool for assessing risk of bias was used for reporting risk of bias among individual studies. A total of N = 24 for qualitative and N = 21 studies for quantitative analysis published till 2020 were included. The cumulative total number of animals included in the control and test groups were N = 162 and N = 339, respectively. The duration of the study was between 3 and 102 weeks rhBMP-2 ranked higher in SUCRA as the agent associated with the best performance for bone volume density. rhGDF-5/TCP ranked best in the bone area (mm2), rhPDGF-BB/Equine ranked best in bone height (mm), rhBMP-2 ranked best in the percentage of new bone fill, rhBMP-2/ACS ranked best in new cementum formation, and rhGDF-5/b- TCP/PLGA ranked best in connective tissue attachment and junctional epithelium. There were no adverse effects identified in the literature that could affect the different outcomes for regeneration in intrabony defects. Various recombinant factors are effective in promoting the regeneration of both soft and hard tissue supporting structures of the periodontium. However, when considering different outcomes, different agents, associated or not with biomaterials, ranked best. Keeping into account the limited transferability of results from animal studies to the clinical setting, the choice of the most appropriate formulation of bioactive agents may depend on clinical needs and purpose.

Repair of segmental rabbit radial defects with Cu/Zn co-doped calcium phosphate scaffolds incorporating GDF-5 carrier

Repair of segmental bone defects is a challenge in orthopaedics. A bone substitute is a potential solution for this challenge, and angiogenesis and osteogenesis are critical to the performance of scaffold materials. For enhancing angiogenesis and osteogenesis activities of implanted scaffolds, Cu/Zn co-doped calcium phosphate scaffolds carrying GDF-5-release microspheres were prepared and implanted into surgically created critical-sized rabbit radial defects. Radiological examination, histological analysis and biomechanical tests were used to evaluate the bone healing-union. Results showed that, with increasing Cu/Zn concentrations, new bone area, new blood vessel density, and bending failure load all increased significantly. Furthermore, Cu/Zn co-doped scaffolds incorporating GDF-5-release microspheres exhibited further increased angiogenesis and osteogenesis (vs. Cu/Zn co-doped alone), as well as a superior bending failure load. These show that, simultaneous incorporation of trace essential ions and GDF-5 combines pro-angiogenic and pro-osteogenic actions of these bioactive substances, potentially offering an effective approach to assist the healing of critical-sized bone defects.

Mechanical properties of bone tissues surrounding dental implant systems with different treatments and healing periods

OBJECTIVES

The objective of the current study was to examine whether the nanoindentation parameters can assess the alteration of bone quality resulting from different degrees of bone remodeling between bone tissue ages around the dental implant interface with different treatments and healing periods.

MATERIALS AND METHODS

Dental implants were placed in mandibles of six male dogs. Treatment groups included: resorbable blast media-treated titanium (Ti) implants, alumina-blasted zirconia implants (ATZ), alumina-blasted zirconia implants applied with demineralized bone matrix (ATZ-D), and alumina-blasted zirconia implants applied with rhBMP-2 (ATZ-B). Nanoindentation modulus (E), hardness (H), viscosity (η), and viscoelastic creep (Creep/P _max) were measured for new and old bone tissues adjacent to the implants at 3 and 6 weeks of post-implantation. A total of 945 indentations were conducted for 32 implant systems.

RESULTS

Significantly lower E, H, and η but higher Creep/P _max were measured for new bone tissues than old bone tissues, independent of treatments at both healing periods (p < 0.001). All nanoindentation parameters were not significantly different between healing periods (p > 0.568). ATZ-D and ATZ-B implants had the stiffer slope of correlation between E and Creep/P _max of the new bone tissue than Ti implant (p < 0.039).

CONCLUSIONS

Current results indicated that, in addition to elastic modulus and plastic hardness, measurement of viscoelastic properties of bone tissue surrounding the implant can provide more detailed information to understand mechanical behavior of an implant system.

CLINICAL RELEVANCE

Ability of energy absorption in the interfacial bone tissue can play a significant role in the long-term success of a dental implant system.

Tissue engineering for bone regeneration and osseointegration in the oral cavity

OBJECTIVE

The focus of this review is to summarize recent advances on regenerative technologies (scaffolding matrices, cell/gene therapy and biologic drug delivery) to promote reconstruction of tooth and dental implant-associated bone defects.

METHODS

An overview of scaffolds developed for application in bone regeneration is presented with an emphasis on identifying the primary criteria required for optimized scaffold design for the purpose of regenerating physiologically functional osseous tissues. Growth factors and other biologics with clinical potential for osteogenesis are examined, with a comprehensive assessment of pre-clinical and clinical studies. Potential novel improvements to current matrix-based delivery platforms for increased control of growth factor spatiotemporal release kinetics are highlighting including recent advancements in stem cell and gene therapy.

RESULTS

An analysis of existing scaffold materials, their strategic design for tissue regeneration, and use of growth factors for improved bone formation in oral regenerative therapies results in the identification of current limitations and required improvements to continue moving the field of bone tissue engineering forward into the clinical arena.

SIGNIFICANCE

Development of optimized scaffolding matrices for the predictable regeneration of structurally and physiologically functional osseous tissues is still an elusive goal. The introduction of growth factor biologics and cells has the potential to improve the biomimetic properties and regenerative potential of scaffold-based delivery platforms for next-generation patient-specific treatments with greater clinical outcome predictability.

Tissue-engineered mandibular bone reconstruction for continuity defects: a systematic approach to the literature

BACKGROUND

Despite significant surgical advances over the last decades, segmental mandibular bone repair remains a challenge. In light of this, tissue engineering might offer a next step in the evolution of mandibular reconstruction.

PURPOSE

The purpose of the present report was to (1) systematically review preclinical in vivo as well as clinical literature regarding bone tissue engineering for mandibular continuity defects, and (2) to analyze their effectiveness.

MATERIALS AND METHODS

An electronic search in the databases of the National Library of Medicine and ISI Web of Knowledge was carried out. Only publications in English were considered, and the search was broadened to animals and humans. Furthermore, the reference lists of related review articles and publications selected for inclusion in this review were systematically screened. Results of histology data and amount of bone bridging were chosen as primary outcome variables. However, for human reports, clinical radiographic evidence was accepted for defined primary outcome variable. The biomechanical properties, scaffold degradation, and clinical wound healing were selected as co-outcome variables.

RESULTS

The electronic search in the databases of the National Library of Medicine and ISI Web of Knowledge resulted in the identification of 6727 and 5017 titles, respectively. Thereafter, title assessment and hand search resulted in 128 abstracts, 101 full-text articles, and 29 scientific papers reporting on animal experiments as well as 11 papers presenting human data on the subject of tissue-engineered reconstruction of mandibular continuity defects that could be included in the present review.

CONCLUSIONS

It was concluded that (1) published preclinical in vivo as well as clinical data are limited, and (2) tissue-engineered approaches demonstrate some clinical potential as an alternative to autogenous bone grafting.

Gene delivery of c-myb increases bone formation surrounding oral implants

Bone regeneration around titanium (Ti) implants is a relatively slow process. The c-myb transcription factor has been associated with high proliferation and differentiation rates in bone. This study analyzed whether c-myb can enhance new bone surrounding the implant. In vitro overexpressed chitosan-gold nanoparticles conjugated with plasmid DNA/c-myb (Ch-GNPs/c-myb)-coated Ti surfaces were associated with enhanced expression of the osteogenic molecules osteopontin (OPN), runt-related transcription factor 2 (RUNX-2), and bone morphogenetic proteins (BMP2/7) in MC-3T3E1 osteoblast cells. Further, to determine its in vivo effect, we inserted Ch-GNPs/c-myb-coated Ti implants into rat mandibles. One and 4 wks post-implantation, mandibles were examined by microcomputed tomography, immunohistochemistry, and hematoxylin & eosin staining. The microcomputed tomography analysis demonstrated that c-myb overexpression increased the density and volume of newly formed bone surrounding the implants, compared with those in controls (p < .05). Further, c-myb increased the number of cells expressing BMP2/7 and aided in the increase of new bone (p < .05). These results support the view that c-myb overexpression accelerates new bone surrounding implants and can serve as a potent molecule in promoting tissue regeneration around dental implants. The recipient rat used in this system provides an excellent in vivo model for studies of bone regeneration.