Effectiveness of different cleaning agents on the adherence of Candida albicans to acrylic denture base resin

Influence of nanohydroxyapatite mouthwash on the growth of Candida albicans biofilm on milled denture surfaces: An in vitro study

PURPOSE

There is a need for effective solutions for the persistent prevalence of denture stomatitis (DS) in denture-wearing populations. This study assessed the impact of nanohydroxyapatite (nanoHAP) nanoparticles on Candida albicans biofilm formation on milled polymethylmethacrylate (PMMA) denture bases.

MATERIALS AND METHODS

Acquired salivary pellicle was formed on disks milled from a prepolymerized PMMA puck. The disks were assigned to two groups, A (n = 18) and B (n = 18), and each group was further subdivided into three subgroups (6/subgroup), each treated with either Polident solution (antibacterial denture cleanser), nanoHAP mouthwash, or distilled water. Disks in group A subgroups were soaked in their respective treatment solutions for 8 h, followed by biofilm formation on the disk for 24 h. Disks in group B subgroups had C. albicans biofilm formed on them for 24 h, followed by soaking in their respective treatment solutions for 8 h. Biofilm thickness, biomass, and live/dead cell ratio were determined using a confocal laser scanning microscope. Biofilm morphology was examined with a scanning electron microscope (SEM). Data were analyzed by ANOVA and Tukey-Kramer multiple comparisons (α = 0.05).

RESULTS

In group A, nanoHAP mouthwash displayed significant anti-adhesive properties. In group B, biofilm biomass and thickness significantly decreased (p < 0.05), with the nanoHAP showing the most substantial reduction in existing biofilm compared to other solutions, but it did not significantly affect cell viability.

CONCLUSIONS

This study demonstrated the efficacy of nanoHAP mouthwash in inhibiting C. albicans biofilm formation when used as a storage medium for acrylic dentures. It suggests its potential clinical application for preventing denture stomatitis in patients.

The effect of attachment systems and denture cleaning methods on microbial biomass and composition in implant-supported overdentures: an experimental study

OBJECTIVE

This research endeavors to scrutinize the influence of attachment systems and denture cleaning methodologies on microbial biomass and composition within the realm of implant-supported overdentures, a crucial consideration for patients with dentition defects necessitating such prosthetic solutions.

SUBJECTS AND METHODS

Employing five polymethyl methacrylate specimens designed to emulate the fitting surfaces of traditional dentures and implant-supported overdentures. Following the polishing of each specimen and the quantification of its roughness, co-cultivation with three distinct microbial strains ensued, culminating in ultrasonic cleaning in water. The bar-clip group, differentiated by the depth of attachment, underwent cleaning employing four diverse methods. Biomass quantities were meticulously recorded both pre and post cleaning interventions, with subsequent data analysis via t-testing and one-way ANOVA, maintaining a significance level of α = 0.05.

RESULTS

The bar-clip groups demonstrated an elevated degree of microbial adhesion, with the deeper locator group exhibiting heightened biomass residue post-cleaning, indicative of increased cleaning complexity. Ultrasonic cleaning predominantly targeted biofilm and deceased bacteria, whereas chemical cleaners primarily reduced the quantity of viable bacteria. The synergistic application of ultrasonics and chemical cleaning treatments yielded the minimal biomass residue.

CONCLUSION

In contemplating the utilization of dentures milled by dental computer-aided design/manufacturing systems, meticulous pre-use surface polishing is imperative. The extent of biofilm adhesion correlates with the chosen attachment system. This study advocates for the incorporation of ultrasonic cleaning in conjunction with chemical cleaning solutions to optimize the removal of biofilm and live cellular entities in the context of implant-supported overdentures.

Effectiveness of Denture Cleansers on Candida albicans Biofilm on Conventionally Fabricated, Computer-Aided Design/Computer-Aided Manufacturing-Milled, and Rapid-Prototyped Denture Base Resins: An In Vitro Study

INTRODUCTION

Conventionally fabricated denture base resins have been used for over 150 years. Newer denture base resins can provide a superior fit and may be customized to the patient's characteristics, but the literature on their cleansibility remains limited. The oral cavity can be a hub for thousands of microflora. The maintenance of complete dentures by edentulous patients depends not only on the maintenance of the patient but also on the material used, biofilm adherence, and polishability.

MATERIALS AND METHODS

Cuboid specimens of 10 × 5 × 2 mm were designed using the Meshmixer version 3.5 software (Meshmixer, Australia). The standard tessellation (STL) file was imported and sent for printing (NextDent, Netherlands) (Group 1), milling in polymethyl methacrylate (PMMA) (Ivotion, Ivoclar, Schaan, Liechtenstein) (Group 2), and wax milling (Upcera, China), followed by flasking, counter flasking, and packing using heat-cured acrylic resin (DPI, India) (Group 3). The obtained specimens were polished using pumice and sterilized using a UV sterilization unit. The specimens were then immersed in a suspension of candida broth. After three days of biofilm formation, a colony count was performed and noted as colony-forming units per milliliter (CFU/mL). Specimens were treated using Secure denture cleansing tablets (Ghent, New York), table salt (iodized table salt, Tata, India), Clinsodent (ICPA, Mumbai, India), and Polident denture cleansing powder (Polident, Ontario, Canada). A colony count was done after treatment, and the data were tabulated. Statistical analysis was done using SPSS software to compare the efficiency of denture cleansers in all three groups, and statistical significance was set at 0.05. The Kolmogorov-Smirnov test was done to confirm the normality of the data, followed by a one-way analysis of variance (ANOVA) test to compare the efficiency of denture cleansers on the removal of candida colonies.

RESULTS

Milled denture base resins showed a significantly lower colony count when compared to printed and conventionally fabricated denture base resins. The denture cleansers showed high efficacy in all groups, with the most significant being Secure, which showed a mean difference ranging from 8.114 to 9.887 CFU/mL, followed by Clinsodent, showing a mean of 6.699-9.863 CFU/mL, followed closely by Polident, showing 4.964-7.114 CFU/mL, followed by table salt, being 5.254-8.920 CFU/mL. The 95% confidence interval confirmed statistical significance.

CONCLUSION

The highest candida colony count was demonstrated by the conventional, followed by rapid prototyping, and was least with milled denture base resins. Following treatment with denture cleansers, Secure demonstrated almost complete eradication of colonies, making it the most effective option. Salt exhibited the lowest efficiency, followed closely by Polident and Clinsodent, and the most effective was Secure denture cleanser.

Antimicrobial activity of cleanser tablets against S. mutans and C. Albicans on different denture base materials

BACKGROUND

In this study, the antimicrobial activity of three different cleanser tablets on S. mutans and C. albicans adhesion to PMMA, polyamide and 3D printed resin was investigated.

METHODS

40 samples were prepared for PMMA (SR Triplex Hot), polyamide (Deflex) and 3D printed resin (PowerResins Denture) materials and divided into four subgroups for cleansers (Aktident™, Protefix™, Corega™ tablets and distilled water) (n = 5). After the surface preparations were completed, the samples were immersed separately in tubes containing the prepared microorganism suspension and incubated at 37˚C for 24 h. After the incubation, the samples were kept in the cleanser solutions. The samples were then transferred to sterile saline tubes. All the tubes were vortexed and 10 µl was taken from each of them. Sheep blood agar was inoculated for colony counting. The inoculated plates were incubated for 48 h for S. mutans and 24 h for C. albicans. After incubation, colonies observed on all plates were counted. Statistical analyses were done with three-way ANOVA and Tukey's multiple comparison test.

RESULTS

Polyamide material registered the highest colony count of S. mutans, whereas PMMA registered the lowest. Significant differences in S. mutans adherence (p = 0.002) were found between the three denture base materials, but no such difference in C. albicans adherence (p = 0.221) was identified between the specimens. All three cleanser tablets eliminated 98% of S. mutans from all the material groups. In all these groups, as well, the antifungal effect of Corega™ on C. albicans was significantly higher than those of the other two cleanser tablets.

CONCLUSIONS

According to the study's results, it may be better to pay attention to surface smoothness when using polyamide material to prevent microorganism retention. Cleanser tablets are clinically recommended to help maintain hygiene in removable denture users, especially Corega tablets that are more effective on C. albicans.

Effects of two novel denture cleansers on multispecies microbial biofilms, stain removal and the denture surface: an in vitro study

BACKGROUND

The continuously increasing demand for removable denture appliances and the importance of adequate denture cleaning have led to the development of various denture cleansing products. The aim of this study was to evaluate the efficacy of two novel denture cleansing agents (GE and TM) and three commonly available cleansers (0.5% sodium hypochlorite; NaClO, 0.12% chlorhexidine gluconate; CHX, and Polident®; POL) on multispecies microbial biofilm formation, stain removal and physical properties of dentures.

METHODS

The antimicrobial activities of denture cleansing agents were determined against major oral opportunistic pathogens including Streptococcus mutans, Staphylococcus aureus, Escherichia coli and Candida albicans, using time-kill assays. Multispecies microbial biofilms grown on acrylic resins for 72 h were generated to determine the antibiofilm effects of cleansing agents by confocal laser scanning microscopy (CLSM). Evaluations of the tea and coffee stain removal properties and the alterations in the physical properties of dentures were also performed. The toxicity of cleanser residues released from denture acrylics to fibroblast cells was investigated using MTT assay.

RESULTS

All denture cleansing agents tested could effectively kill oral bacteria and Candida albicans. Furthermore, after immersion for more than 3 h, the cleansers Polident®, GE and TM could efficiently penetrate and inhibit multispecies denture biofilms with effects similar to 10 min of immersion in 0.5% NaClO. However, immersion in 0.12% CHX for 20 min showed less antibiofilm activity. The NaClO solution had the highest efficacy for removing stains from the artificial teeth. Conversely, the CHX solution enhanced tea and coffee staining, and the teeth immersed in this solution showed clinically unacceptable colour changes (ΔE > 5.5). However, the colour differences of teeth stained and immersed in POL, GE and TM cleansers were in the clinically acceptable range. There was no significant difference among the POL, GE and TM cleansers in terms of stain removal efficacy. The cleansers GE and TM did not alter the surface roughness and colour of the materials, moreover the residues of both cleansers did not exhibit cytotoxicity.

CONCLUSION

Two novel denture cleansing agents containing natural products, GE and TM exhibited effective antimicrobial activity, antibiofilm and stain removal capabilities without toxicity or disturbance of the physical properties of acrylics.

Removal effect of Candida albicans biofilms from the PMMA resin surface by using a manganese oxide nanozyme-doped diatom microbubbler

To prevent oral candidiasis, removal of the Candida biofilms from dentures is important. However, common denture cleaners are insufficiently effective in removing biofilms. A manganese oxide (MnO₂) nanozyme-doped diatom microbubbler (DM) can generate oxygen gas microbubbles by a catalase-mimicking activity in hydrogen peroxide (H₂O₂). DM can invade and destroy biofilms with the driving force of continuously generated microbubbles. In this study, the Candida biofilm removal efficiency by co-treatment of DM and H₂O₂ was investigated. Diatom particles were reacted with (3-aminopropyl)triethoxysilane to prepare amine-substituted diatom particles. These particles were reacted with potassium permanganate to fabricate DMs. The morphology and components of DM were analyzed by using a scanning electron microscope (SEM). Four types of denture base resin specimens on which biofilms of Candida albicans were formed were treated with phosphate-buffered saline (PBS group), Polident 5-Minute (Polident group), 0.12% chlorhexidine gluconate (CHX group), 3% H₂O₂ (H₂O₂ group), and co-treatment of 3 mg/mL of DM and 3% H₂O₂ (DM group). The biofilm removal effect of each group was quantitatively analyzed by crystal violet assay, and the results were visually confirmed by SEM images. After each treatment, the remaining C. albicans were stained with Hoechst 33342/propidium iodide, and observed with confocal laser scanning microscopy (CLSM) to evaluate the viability. MnO₂ nanozyme sheets were successfully doped on the surface of the fabricated DM. Although biofilms were not effectively removed in the Polident and CHX groups, CLSM images showed that CHX was able to effectively kill C. albicans in the biofilms on all resin specimen types. According to the crystal violet analysis, the H₂O₂ groups removed the biofilms on heat-activated and 3D-printed resins (P < .01), but could not remove the biofilms on autopolymerizing and milled resins significantly (P = .1161 and P = .1401, respectively). The DM groups significantly removed C. albicans from all resin specimen types (P < .01).

Complete denture hygiene solutions: antibiofilm activity and effects on physical and mechanical properties of acrylic resin

BACKGROUND

Appropriated denture hygiene is a predictive factor for longevity of rehabilitation treatment and maintenance of the oral mucosal health. Although, disinfectant solutions are commonly used as denture cleansers, the impact of these solutions on acrylic resin-based dentures remain unclear.

OBJECTIVE

To evaluate, in vitro, the antibiofilm activity of complete denture hygiene solutions and their effects on physical and mechanical properties of acrylic resin.

METHODOLOGY

For antibiofilm activity measurement acrylic resin specimens were contaminated with Candida albicans, Candida glabrata and Streptococcus mutans. After biofilm growth, the specimens were assigned to the hygiene solutions: Distilled water (Control); 0.2% Sodium hypochlorite (SH); Efferdent Power Clean Crystals (EPC) and 6.25% Ricinus communis (RC). The viability of microorganisms was evaluated by agar plate counts. In parallel, physical, and mechanical properties of the acrylic resin were evaluated after simulating a 5-year period of daily immersion in the previously mentioned solutions. The changes in surface roughness, color, microhardness, flexural strength, impact strength, sorption and solubility were evaluated. Data were compared by ANOVA followed by the Tukey test or Kruskal-Wallis followed by the Dunn test depending on the distribution (α=0.05).

RESULTS

Regarding antibiofilm action, SH eliminated all microorganisms while EPC and RC exhibited moderate action against S. mutans (p=0.001) and C. glabrata (p<0.001), respectively. Relative to effects on the physical and mechanical properties of the acrylic resin, RC led to higher values of color change (p=0.030), hardness (p<0.001), surface roughness (p=0.006) and flexural strength (p<0.001). Moreover, RC induced the highest values of changes in solubility (p<0.001). EPC promoted greater changes in surface morphology, whereas immersion in SH retained the initial appearance of the acrylic resin surface. All hygiene solutions reduced the impact strength (p<0.05).

CONCLUSION

SH presented the most effective antibiofilm activity. In addition, changes on properties were observed after immersion in RC, which were considered within acceptable limits.

Antimicrobial activity of effervescent denture tablets on multispecies biofilms

PURPOSE

To investigate the impact of peroxide-based solutions in reducing viability and metabolic activity of multispecies biofilms on denture base acrylic resin surfaces and for removing them from these surfaces.

BACKGROUND

Denture cleansers are effective in reducing monospecies biofilm; however, studies evaluating their action on multispecies biofilms are scarce.

MATERIALS AND METHODS

Sixty-nine denture base acrylic resin specimens (Ø 15 × 3 mm) were sterilised then contaminated with Candida albicans, Staphylococcus aureus and Pseudomonas aeruginosa to form multispecies biofilms. Biofilms were grown for 24 hours; subsequently, specimens were immersed in three different cleansing solutions (n = 9): nitradine (NI), fixodent (FX) and phosphate-buffered saline (Control), according to the respective manufacturer's instructions. After applying the hygiene protocols, viability of microorganisms was evaluated by counting colony-forming units and assessing metabolic activity. Moreover, biofilm removal capacity was estimated based on extension of cell-covered areas visualised in fluorescent microscopy micrographics.

RESULTS

Microbial counts were solution-dependent; NI was effective against all microorganisms (P < .05). FX exhibited moderate antimicrobial action, reducing P aeruginosa (P < .05) and S aureus (P < .05) viability by approximately 2 logs. Both peroxide-based solutions reduced metabolic activity (P < .001) and biofilm-covered areas on specimen surfaces (P < .001).

CONCLUSION

Under the experimental conditions tested, these results demonstrated that peroxide-based solutions had favourable antimicrobial activity but promoted no broad elimination of aggregated multispecies biofilm. NI might be more suitable as complementary chemical agent for controlling multispecies denture biofilm.

Effects of two peroxide enzymatic denture cleaners on Candida albicans biofilms and denture surface

Objective

To compare the antifungal action of two commercially available denture cleaning agents to that of standard clinical solutions, and determine their effects on the polymethyl methacrylate (PMMA) acrylic resin denture surface.

Methods

Candida albicans growth was analyzed by colony forming assay, and the methyl thiazolyl tetrazolium (MTT) assay was used to evaluate biofilm formation and cell adhesion. The morphology and roughness of PMMA acrylic resin surface was measured by scanning electron microscopy (SEM) images and stylus method.

Results

Clene®, Polident® and 3% NaHCO₃ solutions showed significantly greater antifungal effects in terms of both inhibiting growth and biofilm formation. In addition, Clene® solution prevented adhesion of C. albicans on cell culture plates compared to filter-sterile tap water, whereas other reagents did not have an inhibitory effect. One-month immersion in the different cleaning reagents significantly inhibited fungal adhesion on the PMMA surface Clene®, Polident® and 3% NaHCO₃ showed greater effect compared to PBS and filter-sterile tap water. Finally, none of the cleansing agents significantly affected the morphology and roughness of the PMMA surface.

Conclusion

Clene®, Polident® and 3% NaHCO₃ solutions can inhibit C. albicans growth and biofilm formation to some extent on cell culture plates, and significantly inhibit fungal adhesion on the PMMA surface without affecting surface morphology and roughness.

Efficacy of removing Candida albicans from orthodontic acrylic bases: an in vitro study

Background

This study evaluated the efficacy of four methods in removing Candida albicans from the acrylic base material used to fabricate removable orthodontic appliances.

Methods

Heat-processed bars of orthodontic acrylic were incubated in a suspension of C. albicans for 2 h at 37 °C. Samples were allocated into five groups (five bars per group) according to the cleaning method: (1) manual brushing using a toothbrush; (2) soaking in a commercial denture cleaning solution; (3) soaking in a commercial mouthwash solution; (4) using an ultrasonic cleaner; and (5) soaking in distilled water as a negative control. Yeast remaining attached to the bars after cleaning were removed by vortexing in growth medium and plated on Sabouraud dextrose agar. The reduction in yeast colony count after cleaning was calculated and expressed as the number of colony forming units per acrylic bar (CFU/bar). The experiment was carried out three times.

Results

All four cleaning methods resulted in a significant decrease in viable yeast cells associated with the acrylic bars compared to the control group. The mean percentage reduction in viable yeast cells affected by the cleaning methods was: brushing 89.9%; chlorhexidine 95.8%; ultrasonic cleaning 99.9%; and denture tablet 100%.

Conclusions

All four methods evaluated in this study were effective, to some extent, in removing C. albicans from orthodontic acrylic samples. The most effective, and readily available, cleaning method was the use of commercial denture sterilizing tablets.

Evaluation of Surface Microhardness Following Chemical and Microwave Disinfection of Commercially Available Acrylic Resin Denture Teeth

INTRODUCTION

Denture disinfection is an indispensable procedure for preventing cross contamination and the maintenance of a healthy oral mucosa in patients rehabilitated with removable dental prosthesis. Nevertheless, they are known to cause changes in the physical and mechanical properties of denture base resins and acrylic resin denture teeth following immersion of a denture in a suitable chemical disinfectant solution or by undergoing microwave irradiation. One such mechanical property indicator for artificial tooth materials is hardness.

AIM

To assess the surface hardness of acrylic resin teeth of three different commercial brands (Ivoclar, Newace, Acryrock) following chemical (2% glutaraldehyde, 1% sodium hypochlorite) and microwave disinfections.

MATERIALS AND METHODS

Ten specimens of each of the three commercial brands were made for control and each simulated disinfection type and stored in distilled water at room temperature for 24 hours. After water storage, specimens were immersed in 2% glutaraldehyde and 1% sodium hypochlorite (one and three cycles) at room temperature for 10 minutes. Irradiation with microwave (one and three cycles) was done in domestic microwave for three minutes with the specimens immersed in 150 ml of distilled water. The specimens were stored in distilled water at room temperature for seven days after each disinfection cycle. Vickers hardness measurements were made using a hardness indenter under a load of 50 g force for 10 seconds. Data was subjected to repeated measure two-way ANOVA test and Tukey's test.

RESULTS

There were statistically significant differences for the variables disinfection, tooth, and cycle (p<0.05 for teeth & disinfectant interaction, p<0.05 cycle and disinfectant interaction). The mean surface hardness following one microwave disinfection cycle was lower than control, glutaraldehyde and sodium hypochlorite. Comparison among cycles revealed that microhardness was significantly decreased for three cycles of microwave disinfection.

CONCLUSION

It was concluded that there was no significant difference in microhardness when the teeth were subjected to chemical disinfection but three cycles of microwave disinfection produced decrease in the microhardness of different types of artificial teeth.

Genomic identification and quantification of microbial species adhering to toothbrush bristles after disinfection: A cross-over study

PURPOSE

The aim of this clinical investigation was to identify and quantify the microbial species adhering to toothbrush bristles after controlled brushing and storage in different antimicrobial agents.

METHODS

Sixteen healthy participants were enrolled in this study and randomly submitted to 4 interventions in a cross-over design: brushing and toothbrush storage in (I) Periogard/(II) Periobio (Chlorhexidine gluconate 0.12%), (III) Cepacol (cetylpyridinium chloride 0.05%) and (IV) distilled water (positive control). Thirty-eight bacterial species including putative pathogens and 5 Candida spp. were assessed by Checkerboard DNA-DNA hybridization.

RESULTS

The results of the study have shown a striking reduction of the total microbial counts, including bacteria and Candida spp., on the toothbrush bristles after storage in cetylpyridinium chloride 0.05% (p < 0.0001). Chlorhexidine gluconate 0.12% showed no differences on the total bacterial count when compared to distilled water (p > 0.05). Cetylpyridinium chloride solution also presented the lowest genome counts and frequency of detection for individual target species; distilled water showed the highest individual genome counts (p < 0.05). Potential pathogenic species were recorded in moderate to high levels for chlorhexidine gluconate and distilled water.

CONCLUSION

Cetylpyridinium chloride 0.05% was the most effective storage solution in the reduction of total and individual microbial counts, including pathogenic species.

Relationship among local and functional factors in the development of denture stomatitis in denture wearers in northern Brazil

OBJECTIVE: The aim of this study was to evaluate the relationship among functional and qualitative factors in the development of denture stomatitis (DS) (according to Newton's classification) in acrylic-based denture wearers residents from northern Brazil.MATERIAL AND METHOD: A total of 99 patients who wore partial or total acrylic resin-based upper dentures were included in this study. The subjects completed an epidemiological data form that includes the patient's gender, age, local factors (hygiene habits, remove denture to sleep, use of mouthwash, present condition of the denture, age of the denture) and functional factors (vertical dimension at rest, vertical dimension of occlusion, occlusion, retention, and static and dynamic stability). To detect yeasts, samples were collected from the inner surface of the dentures and from the palatal mucosa in contact with it. Subsequently, the samples were cultured on Sabouraud dextrose agar, observing macro and microscopic characteristics.RESULT: In the present study, we did not find any significant relationship between the gender and disease onset. Based on the Newton classification, 36.3% of the patients presented with DS and 89.0% were colonized by yeasts; of these subjects, 50% had type I lesions, 33.3% had type II lesions, and 16.6% had type III lesions. All of the qualitative and local factors, except the use of mouthwash, were clinically relevant to the development of disease.CONCLUSION: Denture stomatitis in denture users in northern Brazil was multifactorial, involving local, functional and microbiological factors.