Evaluation of the efficacy of chemical disinfectants for disinfection of heat-polymerised acrylic resin

Fracture strength of Er,Yag laser treated PMMA denture-based polymer (DBP) colonized with C. albicans, S. aureus, S.mutans, and E.coli

AIM

To assess and equate the efficacy of different disinfection protocols autoclave, chlorhexidine (CHX), PDT utilizing Rose Bengal (RB), chitosan, and Er, Yag laser and their effect on fracture strength of PMMA denture-based polymer (DBP) colonized with C. Albicans, S. aureus, S.mutans, and E.coli.

MATERIAL AND METHODS

A total of 50 (n = 10) PMMA DBP were manufactured and adulterated with the American Type Culture Collection (ATCC) of diverse microbial colonies inhabited by C. Albicans, S. aureus, S.mutans, and E.coli. The specimens were subjected to different denture disinfection approaches by randomly distributing in into five groups i.e., Er, Yag laser, RB, autoclave, CHX, and Chitosan, respectively for appraising antimicrobial effectiveness. PMMA fracture load was also assessed and statistical analysis was performed for CFU/mL (log10) of exposed C. Albicans, S. aureus, S.mutans, and E.coli by one-way ANOVA and Tukey's multiple comparison test at a significance level of p < 0.05.

RESULTS

Intergroup comparison disclosed that denture disinfection with Er, Yag laser, autoclave, Chitosan, and CHX (control) validated comparable antimicrobial efficacy to denture against all inspected CFU/mL (log10) (p>0.05). The intragroup comparison revealed that DBP sanitization with Er, Yag laser, autoclave, Chitosan, RB, and CHX substantiated equivalent effective antimicrobial efficacy in plummeting CFU/mL (log10) of S. mutans and E. coli (p>0.05) but in consideration to S.aureus and C.albicans, all groups resulted in declining their count except 5µm RB activated by PDT(p < 0.05). No significant difference was perceived in fracture load of PMMA denture base among Er, Yag laser, RB, chitosan, and CHX (control) (p > 0.05) except autoclave decontamination procedure that indicated the least fracture strength of DBP when disinfected (p < 0.05).

CONCLUSION

Er, Yag laser, and Chitosan activated by PDT have the potential to be used as an alternative to chlorhexidine for disinfecting Polymethyl methacrylate denture base as they demonstrated the highest antimicrobial efficacy against E. coli, C. Albicans, S aureus, and S. mutans with optimal fracture load.

Do denture cleansers influence the surface roughness and adhesion and biofilm formation of Candida albicans on acrylic resin? Systematic review and meta-analysis

PURPOSE

To evaluate the influence of denture cleansers on the surface roughness, Candida albicans adhesion, and biofilm formation on denture base acrylic resins.

STUDY SELECTION

Electronic databases and gray literature were searched using an individual search strategy. In vitro studies that evaluated the effects of immersion in denture cleansers on the surface roughness (µm) and antimicrobial activity (CFU/mL) on samples of heat-polymerized denture base acrylic resins were included.

RESULTS

After screening, 17 studies were included, and a qualitative synthesis was performed. After assessing the risk of bias, only nine studies were included in the meta-analysis. The meta-analysis results showed that the evaluated solutions (0.5% sodium hypochlorite, 1% sodium hypochlorite, alkaline peroxide, and natural substances) did not influence the roughness of the acrylic resin. However, in the qualitative analysis, it was not possible to confirm an association between roughness and C. albicans adhesion and biofilm formation on the acrylic resin samples.

CONCLUSION

Denture cleansers did not affect the surface roughness of denture base acrylic resins.

Comparative assessment of the effectiveness of different cleaning methods on the growth of Candida albicans over acrylic surface

Context:

This study evaluated the efficacy of denture adhesive, cleanser, chlorhexidine, and brushing against Candida albicans biofilm developed on an acrylic surface and predicted the most effective, simple, and inexpensive way to maintain denture health, thereby preventing denture stomatitis.

Aims:

To find the best possible method for maintaining denture hygiene.

Settings and Design:

This retrospective analysis was conducted in the Guru Nanak Institute of Dental Sciences and Research, Kolkata, and this in vitro study was designed to minimize denture stomatitis among denture wearing population.

Subjects and Methods:

Sixty acrylic discs of equal dimensions after exposure to C. albicans were treated for a duration of 24 h with denture adhesive, cleanser, 0.2% chlorhexidine individually, or in combinations simulating clinical conditions dividing in six groups, ten samples each (n = 10).

Statistical Analysis Used:

After treatment, colony count was evaluated and statistically analyzed by post hoc Tukey's test and Dunnett's test to determine the most effective way of prevention.

Results:

The statistical post hoc analysis (Tukey's test and Dunnett's test) showed high significance (P < 0.0001). The group treated with adhesive showed high fungal growth compared to the control group, whereas chlorhexidine showed high potency to prevent C. albicans, whereas adhesive increased the adhesion of C. albicans to acrylic surface.

Conclusions:

Denture adhesive increases the adherence of C. albicans to denture surface. Other cleaning chemicals such as cleanser and chlorhexidine decrease the adherence. Moreover, among the all denture cleaning protocol, chlorhexidine drastically inhibit the adherence, as well as growth of C. albicans over denture surface.

A Comparative Clinical Study of the Effect of Denture Cleansing on the Surface Roughness and Hardness of Two Denture Base Materials

AIM:

This study aimed to verify the influence of oral environment and denture cleansers on the surface roughness and hardness of two different denture base materials.

METHODS:

A total of sixteen identical removable disc specimens (RDS) were processed. Eight RDS were made from heat-cured acrylic resin (AR) and the other eight were fabricated from thermoplastic injection moulded resin (TR). Surface roughness and hardness of DRS were measured using ultrasonic profilometry and Universal testing machine respectively. Then the four RDS (two AR and two of TR) were fixed to each maxillary denture, after three months RDS were retrieved. Surface roughness and hardness of RDS have measured again.

RESULTS:

The surface roughness measurements revealed no significant difference (p >0.05) for both disc groups at baseline. However, both groups showed a significant increase in the surface roughness after three months with higher mean value for (TR) group. On the other hand, the (AR) group showed higher hardness mean value than (TR) group at baseline with no significant decrease in the hardness values (p >0.05) following three months follow-up period.

CONCLUSIONS:

Denture cleansers have an effect on the denture’s surface roughness and hardness concurrently with an oral condition which will consequently influence the complete dentures’ lifetime and patients’ satisfaction.

Antimicrobial activity of complete denture cleanser solutions based on sodium hypochlorite and Ricinus communis - a randomized clinical study

To preserve oral health and to maintain the prosthetic devices, it is important not only to improve the properties of commonly known hygiene products, but also to investigate new materials with antimicrobial action.

Effect of denture-coating composite on Candida albicans biofilm and surface degradation after disinfection protocol

INTRODUCTION

Denture stomatitis is the most common pathology affecting denture wearers and its main cause is colonisation of dentures with Candida albicans.

OBJECTIVE

This study investigated the effectiveness of two commercial composite surface sealants (Biscover(®) LV and Surface Coat(®)) to reduce C. albicans biofilm colonisation on denture resin, as well as their surface integrity after disinfection cycles with 1% sodium hypochlorite solution.

METHODS

Heat-cured acrylic resin specimens were manufactured (10 mm × 10 mm × 1 mm). The specimen surfaces were mechanically polished to simulate rough or smooth denture surfaces. Four surface-treatment groups were tested: smooth surfaces [0.3 μm of mean roughness (Ra)]; rough surfaces (3 μm of Ra); rough surfaces treated with Biscover(®) LV; and rough surfaces treated with Surface Coat(®). Specimens of each group were randomly divided to undergo immersion in distilled water or 1% sodium hypochlorite for 30 or 90 cycles each. Specimens of all groups in each immersion solution were tested using a crystal violet (CV) staining assay for biofilm quantification and by scanning electron microscopy for visual analyses of surface integrity and biofilm structure. CV assay data were analysed using one-way analysis of variance (ANOVA) followed by Tukey's multiple comparison test (P < 0.05).

RESULTS

The effectiveness and surface integrity of Biscover(®) LV-treated surfaces were similar to those of smooth surfaces, whereas Surface Coat(®) -treated surfaces presented a similar performance to rough surfaces in all solutions and cycles.

CONCLUSION

These results suggest the possibility of clinical use of Biscover(®) LV for denture coating on surfaces in which mechanical polish is not indicated, such as the fitting surface.

Antimicrobial action of sodium hypochlorite and castor oil solutions for denture cleaning - in vitro evaluation

The objective of this in vitro study was to evaluate the antimicrobial action of sodium hypochlorite (0.25% and 0.50%) and 10% castor oil solutions against specific microorganisms, by counting Colony Forming Units (CFU) of clinically important bacteria and Candida species. Acrylic resin specimens (n = 320; Lucitone 550) were obtained from square metal matrices (10 x 10 x 2 mm), sterilized by microwave (650W, for 6 minutes) and contaminated by Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans, Bacillus subtilis, Escherichia coli, Streptococcus mutans, Enterococcus faecalis and Candida glabrata. The specimens were immersed for 20 minutes in one of the following hygiene solutions (n = 10/each): A - 0.25% Sodium hypochlorite; B - 0.5% Sodium hypochlorite; C - 10% Castor oil solution; and D (Control) - saline. Adhered cells were suspended and inoculated into a selective solid medium (37ºC for 24 h). The Student's t-test (α = 0.05) was performed to compare log10(CFU+1)/mL between Groups C and D. The results showed that sodium hypochlorite (0.25% and 0.5%) completely eliminated all detectable microorganisms. The castor oil solution eliminated B. subtilis and reduced counts for other strains. Differences between C and D were significant (p < 0.05) for all species except for E. faecalis. Both sodium hypochlorite solutions (0.25% and 0.5%) were effective in eliminating all microorganisms evaluated, and may be useful as cleaning solutions for complete dentures. The castor oil solution provided moderate efficacy and performed differently on the tested species, with the strongest effect on B. subtilis and with non-significant action on E. faecalis.

The Beneficial Effect of Equisetum giganteum L. against Candida Biofilm Formation: New Approaches to Denture Stomatitis

Equisetum giganteum L. (E. giganteum), Equisetaceae, commonly called “giant horsetail,” is an endemic plant of Central and South America and is used in traditional medicine as diuretic and hemostatic in urinary disorders and in inflammatory conditions among other applications. The chemical composition of the extract EtOH 70% of E. giganteum has shown a clear presence of phenolic compounds derived from caffeic and ferulic acids and flavonoid heterosides derived from quercitin and kaempferol, in addition to styrylpyrones. E. giganteum, mainly at the highest concentrations, showed antimicrobial activity against the relevant microorganisms tested: Escherichia coli, Staphylococcus aureus, and Candida albicans. It also demonstrated antiadherent activity on C. albicans biofilms in an experimental model that is similar to dentures. Moreover, all concentrations tested showed anti-inflammatory activity. The extract did not show cytotoxicity in contact with human cells. These properties might qualify E. giganteum extract to be a promising alternative for the topic treatment and prevention of oral candidiasis and denture stomatitis.

Relationship among local and functional factors in the development of denture stomatitis in denture wearers in northern Brazil

OBJECTIVE: The aim of this study was to evaluate the relationship among functional and qualitative factors in the development of denture stomatitis (DS) (according to Newton's classification) in acrylic-based denture wearers residents from northern Brazil.MATERIAL AND METHOD: A total of 99 patients who wore partial or total acrylic resin-based upper dentures were included in this study. The subjects completed an epidemiological data form that includes the patient's gender, age, local factors (hygiene habits, remove denture to sleep, use of mouthwash, present condition of the denture, age of the denture) and functional factors (vertical dimension at rest, vertical dimension of occlusion, occlusion, retention, and static and dynamic stability). To detect yeasts, samples were collected from the inner surface of the dentures and from the palatal mucosa in contact with it. Subsequently, the samples were cultured on Sabouraud dextrose agar, observing macro and microscopic characteristics.RESULT: In the present study, we did not find any significant relationship between the gender and disease onset. Based on the Newton classification, 36.3% of the patients presented with DS and 89.0% were colonized by yeasts; of these subjects, 50% had type I lesions, 33.3% had type II lesions, and 16.6% had type III lesions. All of the qualitative and local factors, except the use of mouthwash, were clinically relevant to the development of disease.CONCLUSION: Denture stomatitis in denture users in northern Brazil was multifactorial, involving local, functional and microbiological factors.

Color Stability, Surface Roughness and Flexural Strength of an Acrylic Resin Submitted to Simulated Overnight Immersion in Denture Cleansers

This study evaluated color stability, surface roughness and flexural strength of acrylic resin specimens after immersion in alkaline peroxide and alkaline hypochlorite, simulating a period of one and a half year of use of overnight immersion. Sixty disc-shaped (16X4 mm) and 80 rectangular specimens (65X10X3.3 mm) were prepared from heat-polymerized acrylic resin (Lucitone 550) and distributed into 4 groups (n=20): C1: without immersion, C2: 8 h immersion in distilled water; AP: 8 h immersion in alkaline peroxide effervescent tablet; SH: 8 h immersion in 0.5% NaOCl solution. Properties were evaluated at baseline and after the immersion. Color data were also calculated according the National Bureau of Standards (NBS). Results were analyzed statistically by ANOVA and Tukey's HSD test (α=0.05). AP (2.34 ± 0.41) caused color alteration significantly higher than C2 (0.39 ± 0.30) and SH (1.73 ± 0.52). The mean ΔE values were classified as indicial for C2 (0.36 ± 0.29) and noticeable for AP (2.12 ± 0.39) and SH (1.59 ± 0.48). SH (0.0195 ± 0.0150) caused significantly higher ΔRa (p=0.000) than the C2 (0.0005 ± 0.0115) and PA (0.0005 ± 0.0157) groups. There was no statistically significant difference (p=0.063) among the solutions for flexural strength (C1: 105.43 ± 14.93, C2: 100.30 ± 12.43, PA: 97.61 ± 11.09, SH: 95.23 ± 10.18). In conclusion, overnight immersion in denture cleansing solutions simulating a year and a half of use did not alter the flexural strength of acrylic resin but caused noticeable color alterations, higher for alkaline peroxide. The 0.5% NaOCl solution caused increase in surface roughness.

Effect of chemical and microwave disinfection on the surface microhardness of acrylic resin denture teeth

PURPOSE

The purpose of this study was to evaluate the effect of simulated disinfections (2% glutaraldehyde, 1% sodium hypochlorite, and microwave energy) on the surface hardness of Trilux, Biocler, Biotone, New Ace, and Magister commercial artificial teeth.

MATERIALS AND METHODS

Specimens (n = 10) were made with the teeth included individually in circular blocks of acrylic resin, leaving the labial surface exposed. Cycles of simulated chemical disinfection were accomplished with the specimens immersed in the solutions at room temperature for 10 minutes, followed by tap water washing for 30 seconds and storage in distilled water at room temperature for 7 days until the next disinfection. Simulated disinfection by microwave energy was carried out in a domestic oven with 1300 W at a potency of 50% for 3 minutes with the specimens individually immersed in 150 ml of distilled water. Control (no disinfection) and the experimental groups (first and third disinfection cycles) were submitted to Knoop hardness measurements with indentations at the center of the labial tooth surface. Data were submitted to repeated measure two-way ANOVA and Tukey's test (α = 0.05).

RESULTS

Biocler, Magister, and Trilux showed lower surface microhardness when submitted to microwave. Lower microhardness for Biotone was promoted by hypochlorite, while no significant difference was shown for New Ace. The third disinfection cycle significantly decreased the tooth surface hardness only for microwave.

CONCLUSIONS

Different disinfection methods promoted different effects on the microhardness of different types of artificial teeth. Surface microhardness of the teeth was less affected by the simulated chemical disinfections when compared to microwaved specimens.

Cleaning removable orthodontic appliances: a survey

OBJECTIVE

The aim of this survey was to analyze the recommendations commonly followed in Germany for cleaning removable orthodontic appliances (ROAs) and to compare these with published procedures.

METHODS

A total of 450 randomly-selected orthodontists were contacted by telephone and asked for their recommendations for cleaning ROA.

RESULTS

The most frequent recommendation was mechanical cleaning with a toothbrush (99.8%). Chemical detergents (37.1%) and treatment with diluted vinegar or citric acid (30.5%) were mentioned less often.

CONCLUSION

The use of cleaning solutions was recommended comparatively infrequently, even though the scientific literature suggests that this is the most hygienic way to care for ROA.