THE INFLUENCE of HEAT TREATMENT ON the ACTIVITY of LIPO-AND HYDROPHILIC COMPONENTS of OAT GRAIN

The effect of Vaccinium bracteatum Thunb. leaves addition on antioxidant capacity, physicochemical properties, and in vitro digestibility of rice extrudates

Vaccinium bracteatum Thunb.leaves (VBTL) are a traditional Chinese herbal medicine with potential natural pigments and antioxidants. Its application information on extrusion is limited. In this study, to increase the usage of foods containing VBTL, rice-based extrudates with VBTL were investigated. The extrusion was performed at a wide temperature range (60-140°C) and with different VBTL supplementations (3%-10%). The extrudates with 10% VBTL showed a significant decrease in total phenolic content (TPC), total flavonoid content (TFC), and antioxidant activity upon extrusion. TPC and TFC increased with the rise of barrel temperature. The VBTL color was stable during the wide-temperature extrusion process. The bioactivities of the extrudates were positively correlated with the VBTLsupplement (R = 0.943-0.989). In addition, different addition levels of VBTL significantly changed the water absorption index (WAI), water solubility index (WSI), pasting properties, and in vitro starch digestibility of the extrudates. Moreover, extrudates with 3% VBTL showed the highest WAI and peak viscosity but the lowest in vitro starch digestibility. These results may suggest that rice extrudates with a low supplement of VBTL have an acceptable color and may be used as functional additives for high antioxidant and low glycemic response diets. PRACTICAL APPLICATION: The results showed that the Vaccinium bracteatum Thunb. leaves (VBTL) color and antioxidation were stable during the wide-temperature extrusion process. Extrusion processing can be used to enlarge the usage of VBTL and simplify its traditional processing method. Applying VBTL to the process of extrusion appears to be a suitable method of producing value-added and low glycemic response extrudates.

Heat and hydrothermal treatments of non-wheat flours

Non-wheat cereals have become popular in the diet due to their nutritional benefits, but their application is limited by properties of their proteins. Some of these flours can be conventionally processed, but the final products are not of acceptable quality. Modification of physico-chemical properties of non-wheat flours by dry heat and extrusion represent the alternative process which can transform the flours into an adequate raw material for the bakery and confectionery industry. The aim of this study was to determine the type and extent of physico-chemical changes in modified flours whose mixtures were used successfully for bread production. Extrusion had stronger influence on chemical composition of flours than dry heating, especially on the content of fats and phenolic compounds. Extrusion also increased starch digestibility due to complete gelatinization process, making it almost equal for all flours. On the other hand, protein digestibility depends mostly on botanical origin of flour.

Impact of Storage and Packaging Material on the Nutritional, Product Properties and Microbial Count of Extruded Snacks

Background:

The extrusion cooking is the most widely used process so the development and consumption of extruded snack products having health and nutritious benefits would help increase the health status of the population.

Objective:

The aim of this study was to investigate the effect of storage days on physical, microbial activity and sensory characteristics of extruded snacks and kinetics of extruded snacks.

Methods:

Extruded snacks were produced by extrusion cooking at optimized conditions of temperature, moisture and screw speed of 110°C, 12% (db) and 200 rpm. The products were packed in lowdensity polyethylene (LDPE) and laminated pouches (LP) and were stored at an accelerated temperature condition of 40 ± 2°C. The storage stability in terms of quality parameters such as moisture, hardness, bulk density, color, lateral expansion, sensory characteristics and total plate count was investigated.

Results:

An increase (p≤0.05) in the value of moisture, bulk density, a*, and total plate count was observed during the storage period, whereas hardness, L*, b*, ΔE and sensory characteristics showed significant (p≤0.05) decreased order with storage period. No significant effect on the lateral expansion of the extruded product was observed. A significant decrease in total carbohydrate, fat and protein content was found during the storage period. The average sensory score and microbial analysis suggested that extruded snacks packed in LDPE pouches can only be acceptable up to the 60th day and extruded snacks packed in LP can be acceptable to more than 90th day. The kinetics of color and hardness suggest first order kinetics.

Conclusion:

Overall investigation suggested that extruded snacks were more stable in the LP as compared to LDPE pouches.

Sensory analysis and fatty acid profile of specialty coffees stored in different packages

The conservation of the quality of special coffees depends on the storage conditions. Therefore, new technologies for the packaging of grains need to be studied. This work was carried out with the objective of evaluating the effect of different packages on the quality of the stored coffee. The free fatty acid profile, fat acidity and sensory characteristics of the grains were analyzed during storage. The coffees were stored for 12 months in 8 packaging types. Coffee stored in jute bags differed mainly due to the higher values of fat acidity and lower scores in sensory analysis. The high-barrier packages were more efficient in the storage of the coffee beans since they presented the lowest deterioration indicators, represented by the low values of fat acidity, free fatty acids and higher scores in the sensorial evaluation.

The Effects of CO2 Injection and Barrel Temperatures on the Physiochemical and Antioxidant Properties of Extruded Cereals

The effects of CO₂ injection and barrel temperatures on the physiochemical and antioxidant properties of extruded cereals (sorghum, barley, oats, and millet) were studied. Extrusion was carried out using a twin-screw extruder at different barrel temperatures (80, 110, and 140°C), CO₂ injection (0 and 500 mL/min), screw speed of 200 rpm, and moisture content of 25%. Extrusion significantly increased the total flavonoid content (TFC) of extruded oats, and β-glucan and protein digestibility (PD) of extruded barley and oats. In contrast, there were significant reductions in 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, PD of extruded sorghum and millet, as well as resistant starch (RS) of extruded sorghum and barley, and total phenolic content (TPC) of all extrudates, except extruded millet. At a barrel temperature of 140°C, TPC in extruded barley was significantly increased, and there was also an increase in DPPH and PD in extruded millet with or without CO₂ injection. In contrast, at a barrel temperature of 140°C, the TPC of extruded sorghum decreased, TFC of extruded oats decreased, and at a barrel temperature of 110°C, PD of extruded sorghum without CO₂ decreased. Some physical properties [expansion ratio (ER), specific length, piece density, color, and water absorption index] of the extrudates were significantly affected by the increase in barrel temperature. The CO₂ injection significantly affected some physical properties (ER, specific length, piece density, water solubility index, and water absorption index), TPC, DPPH, β-glucan, and PD. In conclusion, extruded barley and millet had higher potential for making value added cereal-based foods than the other cereals.

Effect of processing on phenolic antioxidants of fruits, vegetables, and grains--a review

Understanding the influence of processing operations such as drying/dehydration, canning, extrusion, high hydrostatic pressure, pulsed electric field, and ohmic heating on the phytochemicals of fruits, vegetables, and grains is important in retaining the health benefiting properties of these antioxidative compounds in processed food products. Most of the previous investigations in the literature on the antioxidants of fruits, vegetables, and grains have shown that food-processing operations reduced the antioxidants of the processed foods, which is also the usual consumer perception. However, in the last decade some articles in the literature reported that the evaluation of nutritional quality of processed fruits and vegetables not only depend on the quantity of vitamin C but should include analyses of other antioxidant phytochemicals and antioxidant activity. Thermal processing increased the total antioxidant activity of tomato and sweet corn. Most importantly, analysis also depends on the condition, type, and mechanism of antioxidant assays used. This review aims to provide concise information on the influence of various thermal and nonthermal food-processing operations on the stability and kinetics of health beneficial phenolic antioxidants of fruits, vegetables, and grains.

Antioxidant potential and quality characteristics of vegetable-enriched corn-based extruded snacks

Phenolic content, antioxidant activity and sensory characteristics of vegetable-enriched extrudates were investigated as a result of extrusion conditions, including extrusion temperature (140-180 °C), screw rotation speed (150-250 rpm) and feed moisture content (14-19 % w.b.). Broccoli flour and olive paste was used in mixtures with corn flour at a ratio of 4 to 10 % (broccoli/corn) and 4 to 8 % (olive paste/corn). A simple power model was developed for the prediction of phenolic content and antioxidant activity of extrudates by extrusion conditions and feed composition. Phenolic content and antioxidant activity of broccoli enriched extrudates increased with extrusion temperature and broccoli addition and decreased with feed moisture content. The antioxidant activity of olive paste extrudates increased with material ratio and decreased with feed moisture content and screw rotation. Sensory porosity, homogenous structure, crispness, cohesiveness and melting decreased with feed moisture content, while the latter increased the mealy flavor and hardness of extrudates. Acceptable snacks containing broccoli flour or olive paste can be produced by selecting the appropriate process conditions.

Effect of extrusion on the antioxidant capacity and color attributes of expanded extrudates prepared from purple potato and yellow pea flour mixes

Foods with antioxidant capacity provide protection against cardio-vascular, certain forms of cancers, and Alzheimer's diseases caused by oxidative damages and contribute health benefits. The effect of extrusion cooking on the antioxidant capacity and color attributes of extruded products prepared from 3 selected formulations of purple potato and yellow pea flours using a co-rotating twin screw extruder were studied. Expansion ratios of the extruded products varied from 3.93 to 4.75. The total antioxidant capacities (TAC) of the extruded products, using DPPH assay, were 3769 to 4116 μg trolox equivalent/g dry weight sample and not significantly different (P > 0.05) from their respective raw formulations. The total phenolic contents (TP) of the extruded products varied from 2088 to 3766 μg of gallic acid equivalent/g dry weight sample and retained 73% to 83% of the TP from the raw formulations after extrusion. The total anthocyanins contents (TA) in the extrudates were 0.116 to 0.228 mg of malvidin-3-glucosides/g dry weight sample. Compared with their raw formulations, significant losses (60% to 70%) of the TA in the extruded products occurred due to extrusion cooking. Browning indices and color attributes such as brightness, chroma, and hue angle agreed with degradation of anthocyanins in the extruded products. However, extrusion cooking retained antioxidant capacities of the raw formulations in the extruded products either in their natural forms or degraded products with radical scavenging activity. This study demonstrated the potential for the production of puffed extruded food products with the improved antioxidant content from colored potatoes and pulse formulations.

Bioactivity of oats as it relates to cardiovascular disease

The food consumption of oats has increased in recent years due to a perceived association with a range of health benefits. Oats are unusual in that the bran is not as physically distinct as in other cereals. This provides a possible benefit in providing a high β-glucan content of the grains. However, oats contain many other phytochemicals including a range of antioxidants that may be associated with health benefits, although the evidence for such benefits is largely indirect and often confusing and contradictory. Nevertheless, the consumption of oats as part of a balanced diet does seem a reasonable approach.

Dietary fibre-rich oat-based products affect serum lipids, microbiota, formation of short-chain fatty acids and steroids in rats

Wistar rats (ten per group) were fed either an oat-free control diet or a dietary fibre-rich test diet containing 500 g oat-based products/kg for 6 weeks. The oat-based products, containing 4–128 g/kg resistant starch, 30–92 g/kg β-glucan and 122–304 g/kg total dietary fibre, were oat flour extrudate, flour/Novelose (commercial resistant starch) extrudate (80:20 w/w), oat bran, bran/Novelose extrudate (80:20 w/w) and autoclaved oat flour. Serum total cholesterol decreased in the groups fed flour, flour/Novelose and bran/Novelose (P<0·05). In most of the test groups, count numbers of bifidobacteria were higher (P<0·001) and of coliforms were lower (P<0·05). The mass of the caecum walls and contents was greater in groups fed Novelose- and bran-containing diets (P<0·005). In all the test groups, pH values were lower in the intestinal contents (P<0·001), and caecal concentrations of acetate (P<0·001), propionate (P<0·05), butyrate (P<0·005) and total SCFA (P<0·001) were higher. The lowest concentrations of steroids were found in rats fed the autoclaved flour. In the other test groups, more bile acids appeared in the caecal (P<0·001) and colonic contents (P<0·005), as well as in the faeces, at week 6 (P<0·001). The highest bile acid excretion was found after feeding bran-containing diets. In the intestinal contents of all the test groups, more primary bile acids (P<0·001) appeared than in the control group. The excretion of steroids increased within the experimental period. Using extrusion technology, dietary fibre-rich oat-based products, which have beneficial physiological effects in rats, can be produced. Oat flour and bran are excellent sources for the preparation of directly edible oat products. Their nutritional properties can be further improved by the addition of resistant starch.