Reliability of assessing dye penetration along root canal fillings using methylene blue

Microleakage of Restorative Materials Used for Temporization of Endodontic Access Cavities

A tight temporary seal applied to an access cavity is thought to improve endodontic outcomes. This study aims to assess the bacterial and glucose microleakage of different types and combinations of temporary restorations. Human-extracted incisors were instrumented, dressed with a calcium hydroxide paste, and sealed with Cavit W (CW), CW/Ketac Molar (CW/KM), CW/Smart Dentin Replacement (CW/SDR), Intermediate restorative material/KM (IRM/KM), or Clip F (CF). Standardized 3D-printed hollow test specimens were manufactured and temporized in the same manner. The specimens were examined for bacterial and glucose leakage for 28 days. Data were analyzed using a Kaplan-Meier survival analysis. CW/SDR and CF showed the least bacterial and glucose leakage over time. CW, CW/KM, and IRM/KM had similarly high levels of glucose leakage, but CW/KM and IRM/KM provided a tighter seal against bacterial penetration than CW. CW/SDR and CF should be considered for the sealing of access cavities of teeth previously restored with methacrylate-based materials.

Exploring the Most Effective Apical Seal for Contemporary Bioceramic and Conventional Endodontic Sealers Using Three Obturation Techniques

Background and Objective: Despite a plethora of studies conducted to date, researchers continue to investigate the best sealer and obturation technique combinations. The aim of this study is to compare the apical seal provided by two bioceramic sealers (Endoseal and Endosequence) with that provided by a calcium hydroxide sealer (Sealapex), and to evaluate the effect of different obturation techniques (cold lateral condensation, continuous wave compaction and single cone) on the apical seal under a stereomicroscope. Materials and Methods: A total of 110 single-rooted mandibular premolar teeth were decoronated, cleaned and shaped using the Endosequence filing system to tip size 30/0.04 taper. Canals were irrigated with 5.25% NaOCl and 17% EDTA. The samples were randomly divided into 11 groups (9 experimental and 2 control groups) according to the designated sealer and technique. Samples were stored in an incubator for 7 days at 37 °C under 100% humidity. Samples were coated with nail varnish except for apical 2 mm and vertically placed in 0.2% rhodamine B dye solution for 48 h. Samples were split longitudinally and viewed under a stereomicroscope at 40× magnification. Results: Insignificant results were obtained between obturation techniques (p = 0.499) whereas statistically significant results were attained based on the type of endodontic sealer (p < 0.001). The overall lowest mean apical microleakage and best sealing ability was demonstrated by Sealapex (2.59 ± 1.20 mm) and amongst techniques by continuous wave compaction (3.90 ± 2.51 mm). Conclusions: Endosequence produced the best apical seal with the continuous wave compaction technique, whereas Endoseal did so with the bioceramic-coated single-cone technique. For the Sealapex sealer, the most effective apical seal was observed using cold lateral condensation. The quality and effectiveness of apical seal differed with the type of endodontic sealer and obturation technique used, and vice versa.

Importance and methodologies of endodontic microleakage studies: A systematic review

INTRODUCTION

It is very important to obtain a tight seal in obturated root canal, making it necessary to conduct clinical or laboratory studies on the sealability of endodontic materials. Different methodologies have been historically used to assess microleakage of different endodontic materials. The aim of the present study was to comprehensively review different material testing methods used in microleakage studies, their interpretation and importance in endodontic literature.

MATERIAL AND METHODS

A systematic search was conducted in Medline, Cochrane, and Web of Science databases. In addition, the reference lists of review articles on the topic were searched. No language restriction was applied. Two independent reviewers screened the article.

RESULTS

Microleakage is considered the single most important risk factor responsible for apical periodontitis. Dye penetration, dye diffusion, bacterial and endototoxin infiltration, fluid filtration, glucose, caffeine and protein infiltration, radioisotope penetration, animal studies, and electrochemical or 3D evaluation are different methodologies used to assess dental leakage. 91 out of 177 articles in the primary search were included in the study. These methods are very divergent in their viewpoints; that is why their results cannot be easily compared. It is necessary to standardize microleakage detection methods in order to more correctly evaluate the phenomena that are found between the root canal wall and the root canal filling materials.

CONCLUSIONS

All the methods are useful if studies are performed strictly with large sample sizes and proper control groups and if the technique can be standardized. Furthermore, more evaluations of the reliability of the methods are strongly recommended. Key words:Dental leakage, review, root canal, material testing methods, data interpretation.

Apical filling characteristics of carrier-based techniques vs. single cone technique in curved root canals

OBJECTIVES

In this in vitro study, we assessed filling characteristics (adaptation, homogeneity, sealer percentage, position of the carrier) of warm and cold obturation methods in curved root canals.

MATERIALS AND METHODS

A reciprocating method was used to prepare 90 curved roots (25 ° average curvature) to an apical size of 25.08. They were then obturated with either (A) Guttafusion (VDW, Munich, Germany), (B) Thermafil (Maillefer, Ballaigues, Switzerland) or (C) single cone technique using 25.08 gutta-percha (VDW) and sealer (2Seal easymix) (n = 30 each group). Five sections in 1-mm steps were obtained from each root, beginning 1 mm short of the apex. The percentage of voids in contact with root canal walls (PVO), the proportion of voids per area (PVA) and the percentage of sealer per area (PSA) were measured.

RESULTS

Little to no differences between Guttafusion and Thermafil were seen in curved root canals with respect to adaptation and homogeneity in the apical region. Both methods showed significantly better adaptation and homogeneity than the single cone technique. The proportion of sealer was significantly greater when roots were obturated with Guttafusion than with Thermafil, but both warm obturation techniques had significantly smaller sealer areas than the single cone technique.

CONCLUSIONS

Compared to the single cone technique, a more favourable root canal filling with less sealer could be expected from both warm obturation techniques in curved root canals.

CLINICAL RELEVANCE

The easier-to-handle Guttafusion leads to comparable results as Thermafil in curved root canals.

Porosity and sealing ability of root fillings with gutta-percha and BioRoot RCS or AH Plus sealers. Evaluation by three ex vivo methods

AIM

To investigate the ability of BioRoot RCS, a tricalcium silicate-based root canal sealer and AH Plus to effectively fill the root canals of contralateral teeth using three evaluation methods, and to investigate also the correlation between the methods.

METHODOLOGY

The prepared root canals of ten pairs of contralateral mandibular premolar teeth were filled with gutta-percha and sealer using lateral compaction. The percentage of voids within the root canal was assessed by micro-computed tomography, whilst sealing ability was investigated by fluid transport and leakage of fluorescent microspheres. The interaction of sealer with dentine, and sealer penetration were assessed by confocal microscopy. The void volume, fluid flow, microsphere leakage and sealer interaction with dentine for both materials were compared. Nonparametric (Mann-Whitney) tests were used to compare the % void and fluid transport of the two sealers. Spearman correlation was used to assess the pairwise relationships between the techniques. The level of significance was set to 0.05.

RESULTS

BioRoot RCS exhibited significantly more percentage of voids than AH Plus. There was no difference in fluid flow and microsphere penetration. BioRoot RCS exhibited a different pattern of sealer penetration and interaction with the dentine walls compared to AH Plus. For both materials, the pairwise correlations between the three techniques were close to zero, indicating weak relationships.

CONCLUSIONS

MicroCT analysis revealed a higher void volume for BioRoot RCS. The other techniques did not show a difference between the sealing ability of the sealers. The correlation between the three ex vivo methods of assessment was weak demonstrating their complementarity rather than their concordance.

Apical Sealing Ability of a Novel Material: Analysis by Fluid Filtration Technique

AIM

The aim of this study is to evaluate the sealing ability of Biodentine(TM), which is new calcium-silicate based dental cement and has endodontic indications similar to those of MTA.

METHODS

The study sample consists of 21extracted human mandibular anterior teeth. The teeth were submitted to root-end preparation and instrumented up to file #40 by step back technique and randomly divided into 3 study groups (n=7): White MTA Angelus(TM) (Angelus, Angelus Odontológica, Londrina, PR, Brazil), Biodentine(TM) (Septodont, SeptodontSpecialités, Saint-MaurdesFosses, France) and the controls. The length of dye penetration between the filling material and tooth structure was measured in millimetres, using a calibrated stereo microscope (Leica MZ75, Germany) at 20× magnification under the same conditions. One-way Analysis of Variance (ANOVA) was used to indicate differences between the experimental groups and the controls. In addition, Tukey Multiple Comparisons Test was used to indicate differences within each group.

RESULTS

The results showed that none of the groups were completely sealed. The mean and standard deviation for dye penetration in Biodentine(TM) group was 0.63±0.20 and in MTA Angelus(TM) group, it was 0.26±0.25. Regarding the comparisons between each group, significant differences were not observed (P=0.0193). The comparison between materials only found a significant difference only between MTA Angelus(TM) and Biodentine(TM) (P<0.05).

CONCLUSIONS

This study evaluated the possibility of Biodentine(TM)'s sealing ability and marginal adaptation, since no studies are available on Biodentine. However, further in vitro and in vivo investigations should be conducted to determine the suitability of Biodentine(TM) for clinical application.

Ability of new obturation materials to improve the seal of the root canal system: a review

New obturation biomaterials have been introduced over the past decade to improve the seal of the root canal system. However, it is not clear whether they have really produced a three-dimensional impervious seal that is important for reducing diseases associated with root canal treatment. A review of the literature was performed to identify models that have been employed for evaluating the seal of the root canal system. In vitro and in vivo models are not totally adept at quantifying the seal of root canals obturated with classic materials. Thus, one has to resort to clinical outcomes to examine whether there are real benefits associated with the use of recently introduced materials for obturating root canals. However, there is no simple answer because endodontic treatment outcomes are influenced by a host of other predictors that are more likely to take precedence over the influence of obturation materials. From the perspective of clinical performance, classic root filling materials have stood the test of time. Because many of the recently introduced materials are so new, there is not enough evidence yet to support their ability to improve clinical performance. This emphasizes the need to translate anecdotal information into clinically relevant research data on new biomaterials.

Comparison of endodontic biomaterials as apical barriers in simulated open apices

Objectives. To evaluate the effect of apical foramen diameter and apical barrier thickness on the sealing ability of mineral trioxide aggregate (MTA) and calcium enriched mixture (CEM) plugs in open apices. Materials and Methods. The fluid filtration method was conducted on a total of 136 roots. Samples were randomly divided into two control (n = 8) and four experimental groups (n = 30). Apical foramen diameters measuring 1.1 and 1.7 mm were shaped for groups "1 and 3" and "2 and 4", respectively. In groups 1 and 2 MTA plug and in groups 3 and 4 CEM plug was inserted. The groups were further divided into subgroups according to the thickness of the apical plugs (3- or 5-mm). Microleakage was measured at 1, 7, and 30 days. Results. Mixed ANOVA test showed that the microleakage in groups 1 and 3 as well as all 5-mm plug subgroups were significantly less than groups 2 and 4 (P < 0.05) and 3-mm subgroups (P < 0.05), respectively. Microleakage was significantly lower at 30th day (P < 0.05). Conclusions. Reducing canal diameter or increasing apical plug thickness and the time interval increases the sealing ability of apical barriers. Furthermore, in comparison to MTA, CEM plugs demonstrated superior sealing ability.