Magnetic resonance imaging diagnosis: incomplete ossification of the humeral condyle in a German shepherd dog

Development of Real-Time Kinematic Magnetic Resonance Imaging (kMRI) Techniques for Studying the Kinematics of the Spine and Joints in Dogs-Preliminary Study on Cadavers

Simple Summary

Many orthopedic and neurological pathologic conditions can potentially lead to or be affected by joint instability. Standard magnetic resonance imaging, as a static technique that examine joints and body parts in functional rest, can underestimate or overlook key diagnostic findings. As a result, kinematic magnetic resonance imaging techniques were developed to evaluate joints and body parts under stress and load conditions or during movement. In human medicine, the real-time acquisition technique is one of the modalities for acquiring kinematic magnetic resonance imaging, and has gained popularity in recent years. This proof-of-concept study was designed to test the feasibility of real-time acquisition techniques in veterinary medicine for the first time. Based on the results of this preliminary cadaveric study, real-time kinematic magnetic resonance imaging may be a feasible and valuable procedure to be applied to the canine cervical spine and stifle joints. Moreover, given the ease of execution and the concise duration of acquisitions, it could be applied in a regular standard protocol MRI with little additional effort, risk, and cost. In this proof-of-concept study, a good visualization of the canine cervical spine and stifle joint was achieved, showing the potential of real-time acquisition techniques for clinical and research applications.

Abstract

Kinematic MRI (kMRI) is a novel human imaging technique that couples the excellent soft tissue contrast and multiplanar capabilities of traditional MRI with kinematic potential. The study’s goals are: (1) testing the feasibility of spinal cord and joints real-time kMRI; and (2) evaluating the quality of these kinematic studies as a new diagnostic option in veterinary medicine. Standard and real-time kinematic MRI were performed on cervical spine, elbow, and stifle joints of seven cadavers. Studies were repeated after a surgical insult aimed to create a certain degree of joint instability. A total of 56 MRI were performed—7 cervical spinal tracts, 3 elbow joints, and 4 stifle joints were examined. The technique was feasible in all the three regions examined. The images were considered of excellent quality for the stifle joint, good to fair for the cervical spine, whereas two of three elbow studies were considered to have unacceptable image quality. Additionally, real-time kMRI provided good to excellent information about stifle instability. Therefore we consider kMRI a promising technique in veterinary medicine. Further studies and an in vivo setting are needed to increase the quality of the kMRI images, and to fully evaluate clinical usefulness.

Accuracy of medial-to-lateral transcondylar screw placement using an aiming device and preoperative computer tomography planning for the treatment of humeral intracondylar fissure

OBJECTIVE

To determine the accuracy of transcondylar screws placed from medial-to-lateral using preoperative planning on computed tomography (CT) and an aiming device in elbows with humeral intracondylar fissures (HIFs).

STUDY DESIGN

Retrospective case series.

ANIMALS

Twenty-five client-owned dogs with HIF.

METHODS

A 4.5-mm transcondylar screw was placed in 34 elbows with HIF. humeral condylar diameter (HCD) was measured at the humeral condylar isthmus on CT. Entry and exit points were planned at 0.3 × HCD cranial and 0.2 × HCD distal to the medial epicondyle and 0.3 × HCD cranial and 0.3 × HCD distal to the lateral epicondyle. An aiming device was used to guide drilling from the medial entry point to the lateral exit point. The difference between planned and actual screw entry and exit points, and the angular deviation of the actual screw axis from the planned screw axis, was assessed on the postoperative CT scans.

RESULTS

Thirty-three out of 34 screws were completely within the humeral condyle. Thirteen out of 34 screws were placed less than 2 mm from planned entry and exit points in both the transverse and the frontal plane. The axis of the screw deviated by a mean of 3.2° (transverse plane) and 3.5° (frontal plane) from the planned axis.

CONCLUSION

Humeral transcondylar screws placed with the technique tested here were entirely within the humeral condyle in 33 out of 34 elbows.

CLINICAL SIGNIFICANCE

Use of CT planning and an aiming device allows accurate placement of transcondylar screws from medial-to-lateral in dogs with HIF.

Effect of Induced Incomplete Ossification of the Humeral Condyle on Ex Vivo Humeral Condylar Biomechanics

OBJECTIVE

 The aim of this study was to investigate the effects of an induced incomplete ossification of the humeral condyle (IOHC) lesion on ex vivo canine humeral condylar biomechanics.

STUDY DESIGN

 Nine paired cadaveric elbows were collected from mature dogs weighing between 20 and 25 kg. Left and right limbs were randomized to IOHC or normal groups. Limbs were prepared for mechanical testing; ligaments were preserved and an IOHC lesion was created. Elbows were potted, positioned into a biomaterials testing system at an angle of 135 degrees and axially loaded to failure at a rate of 30 mm/minute.

RESULTS

 Induced IOHC lesions reduced peak load (p = 0.02) when compared with an intact humerus. There was no difference between stiffness (p = 0.36) of intact humeri or humeri with an induced IOHC lesion. An induced IOHC lesion increased (p = 0.012) the probability of intracondylar fracture under load.

CONCLUSION

 Cadaveric humeri are weakened by the creation of an intracondylar osteotomy and fractures secondary to induced IOHC are similar to spontaneous humeral condylar fractures. These findings support the hypothesis that naturally occurring IOHC weakens the humeral condyle and may predispose to humeral condylar fracture.

Avaliação morfológica e morfométrica da articulação umerorradioulnar em cães através de exames radiográficos e por tomografia computadorizada

RESUMO: Este estudo teve como objetivo apresentar de forma detalhada dados morfológicos e morfométricos da articulação umerorradioulnar de cães de raça definida avaliados por meio de exames físicos, radiográficos e tomográficos. A amostra dessa pesquisa constituiu-se de 44 cotovelos de cães com idades variadas. Para análise de informações obtidas, o coeficiente kappa e de correlação interclasse e associação foram realizados. Constatou-se que o desempenho individual de cada projeção radiográfica teve pobre concordância com o exame tomográfico; não houve concordância entre os observadores para as mensurações do ângulo da incisura ulnar ao exame radiográfico e tomográfico. Porém houve boa/moderada concordância para mensuração da incongruência radioulnar no plano sagital entre os observadores. Concluiu-se que nenhuma das cinco incidências radiográficas foi superior para análise radiográfica, uma vez que cada projeção apresentou melhor identificação de um compartimento do cotovelo. Medidas ao exame tomográfico para incongruência radioulnar não apresentaram reprodutibilidade no plano de reconstrução frontal, entretanto no corte sagital apresentaram boa e moderada concordância entre os observadores e que a mensuração do ângulo da incisura ulnar não apresentou repetibilidade ao exame radiográfico e nem reprodutibilidade ao exame tomográfico. Esses resultados contribuem para melhor utilização de cada exame de acordo com a região a ser avaliada bem como ressaltam a necessidade da somatória de múltiplos exames de imagem para a correta avaliação desta afecção.

Defining a safe corridor for transcondylar screw insertion across the canine humeral condyle: a comparison of medial and lateral surgical approaches

OBJECTIVES

To (1) develop guidelines for the location of drill entry and exit points when inserting a transcondylar screw across the canine humerus; (2) compare the safe corridor for transcondylar screw insertion when drilling medial-to-lateral with drilling lateral-to-medial.

STUDY DESIGN

Anatomic study.

ANIMALS

Dogs (n = 43).

METHODS

The optimum position of a transcondylar screw in 84 elbows was determined using CT multiplanar reconstructions. The positions of drill entry and exit points were defined relative to the epicondyles. Differences in elbow size were accounted for by dividing the measurements by the humeral condylar diameter (HCD), to give normalized measurements. Mean values of normalized measurements were used to develop universal guidelines for the location of drill entry and exit points. These guidelines were then applied to the 84 elbow CT reconstructions. The size of the safe corridor around this calculated drill line was determined, and expressed as tolerance angles in the frontal and transverse planes. The size of the safe corridors for medial-to-lateral and lateral-to-medial drilling were compared.

RESULTS

The lateral entry/exit point was 0.3 × HCD cranial and 0.3 × HCD distal to the lateral epicondyle. The medial entry/exit point was 0.3 × HCD cranial and 0.2 × HCD distal to the medial epicondyle. Using these guidelines resulted in safe virtual screw placement in all 84 elbows. The tolerance angle in the frontal plane was significantly smaller when drilling medial-to-lateral compared with drilling lateral-to-medial (P < .001).

CONCLUSIONS

Medial-to-lateral drilling for transcondylar screw placement carries a higher risk of inadvertently penetrating the joint compared with lateral-to-medial drilling.