Metal shadowing and decoration in electron microscopy of biological macromolecules

A Micrarchaeon isolate is covered by a proteinaceous S-Layer

In previous publications, it was hypothesized that Micrarchaeota cells are covered by two individual membrane systems. This study proves that at least the recently cultivated "Candidatus Micrarchaeum harzensis A_DKE" possesses an S-layer covering its cytoplasmic membrane. The potential S-layer protein was found to be among the proteins with the highest abundance in "Ca. Micrarchaeum harzensis A_DKE" and in silico characterisation of its primary structure indicated homologies to other known S-layer proteins. Homologues of this protein were found in other Micrarchaeota genomes, which raises the question of whether the ability to form an S-layer is a common trait within this phylum. The S-layer protein seems to be glycosylated and the Micrarchaeon expresses genes for N-glycosylation under cultivation conditions, despite not being able to synthesize carbohydrates. Electron micrographs of freeze-etched samples of a previously described co-culture, containing Micrarchaeum A_DKE and a Thermoplasmatales member as its host organism, verified the hypothesis of an S-layer on the surface of "Ca. Micrarchaeum harzensis A_DKE". Both organisms are clearly distinguishable by cell size, shape and surface structure. Importance Our knowledge about the DPANN superphylum, which comprises several archaeal phyla with limited metabolic capacities, is mostly based on genomic data derived from cultivation-independent approaches. This study examined the surface structure of a recently cultivated member "Candidatus Micrarchaeum harzensis A_DKE", an archaeal symbiont dependent on an interaction with a host organism for growth. The interaction requires direct cell contact between interaction partners, a mechanism which is also described for other DPANN archaea. Investigating the surface structure of "Ca. Micrarchaeum harzensis A_DKE" is an important step towards understanding the interaction between Micrarchaeota and their host organisms and living with limited metabolic capabilities, a trait shared by several DPANN archaea.

Visualizing the bacterial cell surface: an overview

The ultrastructure of bacteria is only accessible by electron microscopy. Our insights into the architecture of cells and cellular compartments such as the envelope and appendages is thus dependent on the progress of preparative and imaging techniques in electron microscopy. Here, I give a short overview of the development and characteristics of methods applied for imaging (components of) the bacterial surface and refer to key investigations and exemplary results. In the beginning of electron microscopy, fixation of biological material and staining for contrast enhancement were the standard techniques. The results from freeze-etching, metal shadowing and from ultrathin-sections of plastic-embedded material shaped our view of the cellular organization of bacteria. The introduction of cryo-preparations, keeping samples in their natural environment, and three-dimensional (3D) electron microscopy of isolated protein complexes and intact cells opened the door to a new dimension and has provided insight into the native structure of macromolecules and the in situ organization of cells at molecular resolution. Cryo-electron microscopy of single particles, together with other methods of structure determination, and cellular cryo-electron tomography will provide us with a quasi-atomic model of the bacterial cell surface in the years to come.

Conical tomography of freeze-fracture replicas: a method for the study of integral membrane proteins inserted in phospholipid bilayers

We have used conical tomography to study the structure of integral proteins in their phospholipid bilayer environments. Complete conical series were collected from replicas of the water channel aquaporin-0 (AQP0), a 6.6 nm side tetramer with a molecular weight of approximately 120 kDa that was purified and reconstituted in liposomes. The replicas were tilted at 38 degrees , 50 degrees or 55 degrees and rotated by 2.5 degrees , 4 degrees , or 5 degrees increments until completing 360 degrees turns. The elliptical paths of between 6 and 12 freeze-fracture particles aligned the images to a common coordinate system. Using the weighted back projection algorithm, small volumes of the replicas were independently reconstructed to reconstitute the field. Using the Fourier Shell Correlation computed from reconstructions of even and odd projections of the series, we estimated a resolution of 2-3 nm, a value that was close to the thickness of the replica (approximately 1.5 nm). The 3D reconstructions exhibited isotropic resolution along the x-y plane, which simplified the analysis of particles oriented randomly in the membrane plane. In contrast to reconstructions from single particles imaged using random conical tilt [J. Mol. Biol. 325 (2003) 210], the reconstructions using conical tomography allowed the size and shape of individual particles representing the AQP0 channel to be identified without averaging or imposing symmetry. In conclusion, the reconstruction of freeze-fracture replicas with electron tomography has provided a novel experimental approach for the study of integral proteins inserted in phospholipid bilayers.

The phylum Nanoarchaeota: present knowledge and future perspectives of a unique form of life

The "Nanoarchaeota" are a novel archaeal phylum, forming a unique, deep branch in the 16S rRNA based phylogenetic tree of life. "Nanoarchaeum equitans", the first cultivated representative, is a hyperthermophilic, anaerobic nano-sized coccus with a genome size of about 490 kb. Growth occurs only in coculture with a new chemolithoautotrophic Ignicoccus species.

Structure of functional single AQP0 channels in phospholipid membranes

Aquaporin-0 (AQP0) is the most prevalent intrinsic protein in the plasma membrane of lens fiber cells where it functions as a water selective channel and also participates in fiber-fiber adhesion. We report the 3D envelope of purified AQP0 reconstituted with random orientation in phospholipid bilayers as single particles. The envelope was obtained by combining freeze-fracture, shadowing and random conical tilt electron microscopy followed by single particle image processing. Two-dimensional analysis of 2547 untilted images produced eight class averages exhibiting "square" and "octagonal" shapes with a continuum of variation. We reconstructed in 3D five class averages that best described the data set. The reconstructions ("molds") appeared as metal cups exhibiting external and internal surfaces. We used the internal surface of the mold to calculate the "imprints" that represent the AQP0 particles protruding from the hydrophobic core of the phospholipid bilayer. The complete envelope of the channel, formed by joining the square and octagonal imprints, described accurately the size, shape, oligomeric state, orientation, and molecular weight of the AQP0 channel inserted in the phospholipid bilayer. Rigid body docking of the atomic model of the aquaporin-1 (AQP1) tetramer showed that the freeze-fracture envelope accounted for the conserved transmembrane domain (approximately 73% similarity between AQP0 and AQP1) but not for the amino and carboxyl termini. We suggest that the discrepancy might reflect differences in the location of the amino and carboxyl termini in the crystal and in the phospholipid bilayer.

Three-dimensional reconstruction of metal replicas of the Helicobacter pylori vacuolating cytotoxin

The Helicobacter pylori vacuolating cytotoxin (VacA) forms high molecular weight homooligomers which contain either six or seven copies of a 95-kDa polypeptide. Electron microscope visualization of carbon platinum replicas of quick-freeze, deepetched, preparations of VacA has revealed that the oligomers are arranged in flower-like structures with six- or sevenfold radial symmetry, depending on the number of 95-kDa oligomers that they contain. Each monomer is structured in two subunits of 37 and 58 kDa connected by an exposed loop which is a site for proteolytic cleavage. In preparations of VacA which had undergone extensive cleavage at the exposed loop, oligomers of both six- and seven-fold symmetry which appeared flatter were observed; these latter were interpreted as molecules which had lost a complete set of one of the subunits. We exploited a 3D reconstruction of metal replicas of quick-freeze, deep-etched, oligomers, representing the four types of molecules described. All the molecules appear to adhere with the same face toward the mica. Images of rotary shadowed oligomers were processed by multivariate statistical analysis to evidence clusters of equivalent and homogeneous oligomers. 3D reconstructions of the replicas so classified were performed by random conical tilt tomography. In the case of intact molecules (not cleaved) the reconstructions represent both the outer and the inner surfaces of the mold; the latter gives a reasonably accurate sense of the upper surface of the VacA oligomers. These data support the hypothesis that VacA is an AB type toxin and suggest a model in which the smaller of the two subunits is arranged in a uniform ring on the surface of the molecule in such a way as to contribute to the overall stability of the molecule.

Thickness determination of biological samples with a zeta-calibrated scanning tunneling microscope

A single-tube scanning tunneling microscope has been zeta-calibrated by using atomic steps of crystalline gold and was used for measuring the thickness of two biological samples, metal-coated as well as uncoated. The hexagonal surface layer of the bacterium Deinococcus radiodurans with an open network-type structure shows thickness values that are strongly influenced by the substrate and the preparation method. In contrast, the thickness of the purple membrane of Halobacterium halobium with its densely packed less-corrugated structure exhibits very little variation in thickness in coated preparations and the values obtained are in good agreement with x-ray data.

Three-dimensional structure of the surface protein layer (MW layer) of Bacillus brevis 47

The three-dimensional (3D) structure of one surface protein layer from Bacillus brevis 47, the middle wall (MW) layer, has been reconstructed from tilted-view electron micrographs after correlation averaging to a resolution of 2 nm. The MW layer has p6 symmetry with a center-to-center spacing of 18.3 nm and a minimum thickness of 5.5 nm. The reconstruction reveals a distinct domain structure: the heavier domain of six monomers jointly forms a massive core centered at the sixfold symmetry axis, and lighter domains interconnect adjacent unit cells. In addition, the larger domains collectively form a pore by making contact with each other towards the inner surface, while the smaller domains establish a second connectivity towards the outer surface of the S layer. The MW layer of B. brevis resembles the S layer of Acetogenium kivui in various aspects: they have very similar lattice parameters and highly reminiscent 3D structures; the pores penetrate through the whole core and appear to determine the porosity of the S layers.

Effects of mot gene expression on the structure of the flagellar motor

Direct freezing procedures have enabled us to visualize distinctive intramembrane particle ring structures in the cytoplasmic membranes of peritrichously flagellated bacteria by means of freeze-fracture electron microscopy. These structures were identified as flagellar motor components because their distribution matched that of flagella, and because they were absent in non-flagellated mutants of Escherichia coli. Particle rings were present in both the Gram-positive Streptococcus and the Gram-negative E. coli. In E. coli, a non-functional mocha operon produced flagellated but immotile cells lacking the particle rings. Simultaneous introduction of the motA and motB genes, led to recovery of both motility and the ring structures but neither gene alone was sufficient. The concomitant loss of the rings and motility is consistent with the ring particles having a central role in the flagellar motor.

Bacterial surface proteins. Some structural, functional and evolutionary aspects

The structure of several eubacterial and archaebacterial surface (glyco)proteins as determined by three-dimensional electron microscopy is described. Particular emphasis is placed on surface proteins which interact with membranes. Some structure-function relationships deduced from the structural information, such as shape maintenance and molecular recognition phenomena, are discussed.

Three-dimensional structure of the surface protein of Desulfurococcus mobilis

The spherical cells of the thermophilic, sulfur-dependent archaebacterium Desulfurococcus mobilis are completely covered with a relatively poorly ordered, tetragonally arrayed surface protein. The structure of this surface protein was examined by using three-dimensional electron microscopy. The protein lattice forms an open meshwork composed of cross-shaped morphological units, which are released when glycerol is added. These subunits make contact at the distal ends of their four arms. The p4 symmetry requires that each of these morphological subunits represents a tetramer. The strong interaction of the monomers within the crosses and the relatively weak interaction of the intersecting arms of the crosses within the lattice structure suggest that the tetramers are assembled before their incorporation into the lattice.

Three-dimensional structure of the regular tetragonal surface layer of Azotobacter vinelandii

Fragments of the Azotobacter vinelandii tetragonal surface (S) layer, free of outer membrane material, were obtained by treating whole cells with 100 microM EDTA. The three-dimensional structure of the S layer was reconstructed from tilted-view electron micrographs of the S-layer fragments, after computer-assisted image processing by correlation averaging. At a resolution of 1.7 nm, the S layer exhibited funnel-shaped subunits situated at one fourfold-symmetry axis and interconnected at the other fourfold-symmetry axis to form prominent cruciform linking structures. These data, in conjunction with a relief reconstruction of the surface of freeze-etched whole cells, indicated that the apex of the funnel-shaped subunit was associated with the outer membrane, while the funnel "opening" faced the environment; the cruciform linking structures were formed at the outermost surface of the S layer. Electron microscopy and image enhancement were used to compare the structure of the outer membrane-associated S layer with that of fragments of the S layer dislodged from the outer membrane. This analysis revealed an increase in the lattice constant of the S layer from 12.5 to 13.6 nm and an alteration in the position of the cruciform linking structures in the z direction. These conformational changes resulted in a reduction in the thickness of the S layer (minimum estimate, 5 nm) and an apparent increase in the size of the gaps between the subunits. In terms of the porosity of the S layer, this gave the appearance of a transition from a closed to a more open structure.