Assembly of type I collagen fibrils de novo by the specific enzymic cleavage of pC collagen. The fibrils formed at about 37 degrees C are similar in diameter, roundness, and apparent flexibility to the collagen fibrils seen in connective tissue

Collagen fibril assembly: New approaches to unanswered questions

Collagen fibrils are essential for metazoan life. They are the largest, most abundant, and most versatile protein polymers in animals, where they occur in the extracellular matrix to form the structural basis of tissues and organs. Collagen fibrils were first observed at the turn of the 20th century. During the last 40 years, the genes that encode the family of collagens have been identified, the structure of the collagen triple helix has been solved, the many enzymes involved in the post-translational modifications of collagens have been identified, mutations in the genes encoding collagen and collagen-associated proteins have been linked to heritable disorders, and changes in collagen levels have been associated with a wide range of diseases, including cancer. Yet despite extensive research, a full understanding of how cells assemble collagen fibrils remains elusive. Here, we review current models of collagen fibril self-assembly, and how cells might exert control over the self-assembly process to define the number, length and organisation of fibrils in tissues.

Giantin is required for intracellular N-terminal processing of type I procollagen

Knockout of the golgin giantin leads to skeletal and craniofacial defects driven by poorly studied changes in glycosylation and extracellular matrix deposition. Here, we sought to determine how giantin impacts the production of healthy bone tissue by focusing on the main protein component of the osteoid, type I collagen. Giantin mutant zebrafish accumulate multiple spontaneous fractures in their caudal fin, suggesting their bones may be more brittle. Inducing new experimental fractures revealed defects in the mineralization of newly deposited collagen as well as diminished procollagen reporter expression in mutant fish. Analysis of a human giantin knockout cell line expressing a GFP-tagged procollagen showed that procollagen trafficking is independent of giantin. However, our data show that intracellular N-propeptide processing of pro-α1(I) is defective in the absence of giantin. These data demonstrate a conserved role for giantin in collagen biosynthesis and extracellular matrix assembly. Our work also provides evidence of a giantin-dependent pathway for intracellular procollagen processing.

Nanotopography-guided tissue engineering and regenerative medicine

Human tissues are intricate ensembles of multiple cell types embedded in complex and well-defined structures of the extracellular matrix (ECM). The organization of ECM is frequently hierarchical from nano to macro, with many proteins forming large scale structures with feature sizes up to several hundred microns. Inspired from these natural designs of ECM, nanotopography-guided approaches have been increasingly investigated for the last several decades. Results demonstrate that the nanotopography itself can activate tissue-specific function in vitro as well as promote tissue regeneration in vivo upon transplantation. In this review, we provide an extensive analysis of recent efforts to mimic functional nanostructures in vitro for improved tissue engineering and regeneration of injured and damaged tissues. We first characterize the role of various nanostructures in human tissues with respect to each tissue-specific function. Then, we describe various fabrication methods in terms of patterning principles and material characteristics. Finally, we summarize the applications of nanotopography to various tissues, which are classified into four types depending on their functions: protective, mechano-sensitive, electro-active, and shear stress-sensitive tissues. Some limitations and future challenges are briefly discussed at the end.

Patterning methods for polymers in cell and tissue engineering

Polymers provide a versatile platform for mimicking various aspects of physiological extracellular matrix properties such as chemical composition, rigidity, and topography for use in cell and tissue engineering applications. In this review, we provide a brief overview of patterning methods of various polymers with a particular focus on biocompatibility and processability. The materials highlighted here are widely used polymers including thermally curable polydimethyl siloxane, ultraviolet-curable polyurethane acrylate and polyethylene glycol, thermo-sensitive poly(N-isopropylacrylamide) and thermoplastic and conductive polymers. We also discuss how micro- and nanofabricated polymeric substrates of tunable elastic modulus can be used to engineer cell and tissue structure and function. Such synergistic effect of topography and rigidity of polymers may be able to contribute to constructing more physiologically relevant microenvironment.

Order versus Disorder: in vivo bone formation within osteoconductive scaffolds

In modern biomaterial design the generation of an environment mimicking some of the extracellular matrix features is envisaged to support molecular cross-talk between cells and scaffolds during tissue formation/remodeling. In bone substitutes chemical biomimesis has been particularly exploited; conversely, the relevance of pre-determined scaffold architecture for regenerated bone outputs is still unclear. Thus we aimed to demonstrate that a different organization of collagen fibers within newly formed bone under unloading conditions can be generated by differently architectured scaffolds. An ordered and confined geometry of hydroxyapatite foams concentrated collagen fibers within the pores, and triggered their self-assembly in a cholesteric-banded pattern, resulting in compact lamellar bone. Conversely, when progenitor cells were loaded onto nanofibrous collagen-based sponges, new collagen fibers were distributed in a nematic phase, resulting mostly in woven isotropic bone. Thus specific biomaterial design relevantly contributes to properly drive collagen fibers assembly to target bone regeneration.

Cervical softening during pregnancy: regulated changes in collagen cross-linking and composition of matricellular proteins in the mouse

A greater understanding of the parturition process is essential in the prevention of preterm birth, which occurs in 12.7% of infants born in the United States annually. Cervical remodeling is a critical component of this process. Beginning early in pregnancy, remodeling requires cumulative, progressive changes in the cervical extracellular matrix (ECM) that result in reorganization of collagen fibril structure with a gradual loss of tensile strength. In the current study, we undertook a detailed biochemical analysis of factors in the cervix that modulate collagen structure during early mouse pregnancy, including expression of proteins involved in processing of procollagen, assembly of collagen fibrils, cross-link formation, and deposition of collagen in the ECM. Changes in these factors correlated with changes in the types of collagen cross-links formed and packing of collagen fibrils as measured by electron microscopy. Early in pregnancy there is a decline in expression of two matricellular proteins, thrombospondin 2 and tenascin C, as well as a decline in expression of lysyl hydroxylase, which is involved in cross-link formation. These changes are accompanied by a decline in both HP and LP cross-links by gestation Days 12 and 14, respectively, as well as a progressive increase in collagen fibril diameter. In contrast, collagen abundance remains constant over the course of pregnancy. We conclude that early changes in tensile strength during cervical softening result in part from changes in the number and type of collagen cross-links and are associated with a decline in expression of two matricellular proteins thrombospondin 2 and tenascin C.

Injection temperature significantly affects in vitro and in vivo performance of collagen-platelet scaffolds

Collagen-platelet composites have recently been successfully used as scaffolds to stimulate anterior cruciate ligament (ACL) wound healing in large animal models. These materials are typically kept on ice until use to prevent premature gelation; however, with surgical use, placement of a cold solution then requires up to an hour while the solution comes to body temperature (at which point gelation occurs). Bringing the solution to a higher temperature before injection would likely decrease this intra-operative wait; however, the effects of this on composite performance are not known. The hypothesis tested here was that increasing the temperature of the gel at the time of injection would significantly decrease the time to gelation, but would not significantly alter the mechanical properties of the composite or its ability to support functional tissue repair. Primary outcome measures included the maximum elastic modulus (stiffness) of the composite in vitro and the in vivo yield load of an ACL transection treated with an injected collagen-platelet composite. In vitro findings were that injection temperatures over 30 degrees C resulted in a faster visco-elastic transition; however, the warmed composites had a 50% decrease in their maximum elastic modulus. In vivo studies found that warming the gels prior to injection also resulted in a decrease in the yield load of the healing ACL at 14 weeks. These studies suggest that increasing injection temperature of collagen-platelet composites results in a decrease in performance of the composite in vitro and in the strength of the healing ligament in vivo and this technique should be used only with great caution.

Prelude to corneal tissue engineering - gaining control of collagen organization

By most standard engineering practice principles, it is premature to credibly discuss the "engineering" of a human cornea. A professional design engineer would assert that we still do not know what a cornea is (and correctly so), therefore we cannot possibly build one. The proof resides in the fact that there are no clinically viable corneas based on classical tissue engineering methods available. This is possibly because tissue engineering in the classical sense (seeding a degradable scaffolding with a population synthetically active cells) does not produce conditions which support the generation of organized tissue. Alternative approaches to the problem are in their infancy and include the methods which attempt to recapitulate development or to produce corneal stromal analogs de novo which require minimal remodeling. Nonetheless, tissue engineering efforts, which have been focused on producing the fundamental functional component of a cornea (organized alternating arrays of collagen or "lamellae"), may have already provided valuable new insights and tools relevant to development, growth, remodeling and pathologies associated with connective tissue in general. This is because engineers ask a fundamentally different question (How can that be done?) than do biological scientists (How is that done?). The difference in inquiry has prompted us to closely examine (and to mimic) development as well as investigate collagen physicochemical behavior so that we may exert control over organization both in cell culture (in vitro) and on the benchtop (de novo). Our initial results indicate that reproducing corneal stroma-like local and long-range organization of collagen may be simpler than we anticipated while controlling spacing and fibril morphology remains difficult, but perhaps not impossible in the (reasonably) near term.

Segregation of type I collagen homo- and heterotrimers in fibrils

Normal type I collagen is a heterotrimer of two alpha1(I) and one alpha2(I) chains, but various genetic and environmental factors result in synthesis of homotrimers that consist of three alpha1(I) chains. The homotrimers completely replace the heterotrimers only in rare recessive disorders. In the general population, they may compose just a small fraction of type I collagen. Nevertheless, they may play a significant role in pathology; for example, synthesis of 10-15% homotrimers due to a polymorphism in the alpha1(I) gene may contribute to osteoporosis. Homotrimer triple helices have different stability and less efficient fibrillogenesis than heterotrimers. Their fibrils have different mechanical properties. However, very little is known about their molecular interactions and fibrillogenesis in mixtures with normal heterotrimers. Here we studied the kinetics and thermodynamics of fibril formation in such mixtures by combining traditional approaches with 3D confocal imaging of fibrils, in which homo- and heterotrimers were labeled with different fluorescent colors. In a mixture, following a temperature jump from 4 to 32 degrees C, we observed a rapid increase in turbidity most likely caused by formation of homotrimer aggregates. The aggregates promoted nucleation of homotrimer fibrils that served as seeds for mixed and heterotrimer fibrils. The separation of colors in confocal images indicated segregation of homo- and heterotrimers at a subfibrillar level throughout the process. The fibril color patterns continued to change slowly after the fibrillogenesis appeared to be complete, due to dissociation and reassociation of the pepsin-treated homo- and heterotrimers, but this remixing did not significantly reduce the segregation even after several days. Independent homo- and heterotrimer solubility measurements in mixtures confirmed that the subfibrillar segregation was an equilibrium property of intermolecular interactions and not just a kinetic phenomenon. We argue that the subfibrillar segregation may exacerbate effects of a small fraction of alpha1(I) homotrimers on formation, properties, and remodeling of collagen fibers.

A novel subcellular collagen organization process visualized by total internal reflection fluorescence microscopy

The alpha1beta1 and alpha2beta1 integrins belong to a family of cell-surface molecules involved in structural contacts and signal-transduction events across the cell membrane. Employing two-dimensional substrates coated with fluorescently labeled type I collagen, we have discovered a novel subcellular matrix remodeling event that is particular to cells that express the fibrillar collagen receptor alpha2beta1. Cells expressing alpha1beta1 also perform this collagen organization process, but less proficiently. This work will provide a basis for subsequent studies of cell-mediated collagen fibril assembly.

The echinoderm collagen fibril: a hero in the connective tissue research of the 1990s

Collagen fibrils are some of the most-abundant and important extracellular structures in our bodies, yet we are unsure of their shape and size. This is largely due to an inherent difficulty in isolating them from their surrounding tissues. Echinoderms have collagenous tissues that are similar to ours in many ways, yet they can be manipulated to easily relinquish their collagen fibrils, providing an excellent opportunity to study native fibrillar structure. In the early 1990s, they were found to defy the commonly accepted fibrillar model of the time in that they were much shorter, they were shaped like double-ended spindles, and their centers exhibited a reversal in molecular polarity. Realization of these features helped to reform the questions that were being asked about vertebrate fibrils, shifting the focus toward shape and size. Since then, researchers working with both groups (echinoderms and vertebrates) have worked together to find the structure of native fibrils. This information will be fundamental in understanding what holds collagenous tissues together at the fibrillar level, and could have important implications for people with Ehlers-Danlos syndrome.

The C5 domain of the collagen VI alpha3(VI) chain is critical for extracellular microfibril formation and is present in the extracellular matrix of cultured cells

Collagen VI, a microfibrillar protein found in virtually all connective tissues, is composed of three distinct subunits, alpha1(VI), alpha2(VI), and alpha3(VI), which associate intracellularly to form triple helical heterotrimeric monomers then dimers and tetramers. The secreted tetramers associate end-to-end to form beaded microfibrils. Although the basic steps in assembly and the structure of the tetramers and microfibrils are well defined, details of the interacting protein domains involved in assembly are still poorly understood. To explore the role of the C-terminal globular regions in assembly, alpha3(VI) cDNA expression constructs with C-terminal truncations were stably transfected into SaOS-2 cells. Control alpha3(VI) N6-C5 chains with an intact C-terminal globular region (subdomains C1-C5), and truncated alpha3(VI) N6-C1, N6-C2, N6-C3, and N6-C4 chains, all associated with endogenous alpha1(VI) and alpha2(VI) to form collagen VI monomers, dimers and tetramers, which were secreted. These data demonstrate that subdomains C2-C5 are not required for monomer, dimer or tetramer assembly, and suggest that the important chain selection interactions involve the C1 subdomains. In contrast to tetramers containing control alpha3(VI) N6-C5 chains, tetramers containing truncated alpha3(VI) chains were unable to associate efficiently end-to-end in the medium and did not form a significant extracellular matrix, demonstrating that the alpha3(VI) C5 domain plays a crucial role in collagen VI microfibril assembly. The alpha3(VI) C5 domain is present in the extracellular matrix of SaOS-2 N6-C5 expressing cells and fibroblasts demonstrating that processing of the C-terminal region of the alpha3(VI) chain is not essential for microfibril formation.

Position of single amino acid substitutions in the collagen triple helix determines their effect on structure of collagen fibrils

Collagen II fibrils are a critical structural component of the extracellular matrix of cartilage providing the tissue with its unique biomechanical properties. The self-assembly of collagen molecules into fibrils is a spontaneous process that depends on site-specific binding between specific domains belonging to interacting molecules. These interactions can be altered by mutations in the COL2A1 gene found in patients with a variety of heritable cartilage disorders known as chondrodysplasias. Employing recombinant procollagen II, we studied the effects of R75C or R789C mutations on fibril formation. We determined that both R75C and R789C mutants were incorporated into collagen assemblies. The effects of the R75C and R789C substitutions on fibril formation differed significantly. The R75C substitution located in the thermolabile region of collagen II had no major effect on the fibril formation process or the morphology of fibrils. In contrast, the R789C substitution located in the thermostable region of collagen II caused profound changes in the morphology of collagen assemblies. These results provide a basis for identifying pathways leading from single amino acid substitutions in collagen II to changes in the structure of individual fibrils and in the organization of collagenous matrices.

Collagen self-assembly and the development of tendon mechanical properties

The development of the musculoskeleton and the ability to locomote requires controlled cell division as well as spatial control over deposition of extracellular matrix. Self-assembly of procollagen and its final processing into collagen fibrils occurs extracellularly. The formation of crosslinked collagen fibers results in the conversion of weak liquid-like embryonic tissues to tough elastic solids that can store energy and do work. Collagen fibers in the form of fascicles are the major structural units found in tendon. The purpose of this paper is to review the literature on collagen self-assembly and tendon development and to relate this information to the development of elastic energy storage in non-mineralizing and mineralizing tendons. Of particular interest is the mechanism by which energy is stored in tendons during locomotion. In vivo, collagen self-assembly occurs by the deposition of thin fibrils in recesses within the cell membrane. These thin fibrils later grow in length and width by lateral fusion of intermediates. In vitro, collagen self-assembly occurs by both linear and lateral growth steps with parallel events seen in vivo; however, in the absence of cellular control and enzymatic cleavage of the propeptides, the growth mechanism is altered, and the fibrils are irregular in cross section. Results of mechanical studies suggest that prior to locomotion the mechanical response of tendon to loading is dominated by the viscous sliding of collagen fibrils. In contrast, after birth when locomotion begins, the mechanical response is dominated by elastic stretching of crosslinked collagen molecules.

Procollagen with skipping of alpha 1(I) exon 41 has lower binding affinity for alpha 1(I) C-telopeptide, impaired in vitro fibrillogenesis, and altered fibril morphology

Previous in vitro data on type I collagen self-assembly into fibrils suggested that the amino acid 776-796 region of the alpha1(I) chain is crucial for fibril formation because it serves as the recognition site for the telopeptide of a docking collagen monomer. We used a natural collagen mutation with a deletion of amino acids 766-801 to confirm the importance of this region for collagen fibril formation. The proband has type III osteogenesis imperfecta and is heterozygous for a COL1A1 IVS 41 A(+4) --> C substitution. The intronic mutation causes splicing of exon 41, confirmed by sequencing of normal and shorter reverse transcriptase-PCR products. Reverse transcriptase-PCR using RNA from proband dermal fibroblasts and clonal cell lines showed the mutant cDNA was about 15% of total alpha1(I) cDNA. The mutant transcript is translated; structurally abnormal alpha chains are demonstrated in the cell layer of proband fibroblasts by SDS-urea-PAGE. The proportion of mutant chains in the secreted procollagen was determined to be 10% by resistance to digestion with MMP-1, since chains lacking exon 41 are missing the vertebral collagenase cleavage site. Secreted proband collagen was used for analysis of kinetics of binding of alpha1(I) C-telopeptide using an optical biosensor. Telopeptide had slower association and faster dissociation from proband than from normal collagen. Purified proband pC-collagen was used to study fibril formation. The presence of the mutant molecules decreases the rate of fibril formation. The fibrils formed in the presence of 10-15% mutant molecules have strikingly increased length compared with normal collagen, but are well organized, as demonstrated by D-periodicity. These results suggest that some collagen molecules containing the mutant chain are incorporated into fibrils and that the absence of the telopeptide binding region from even a small portion of the monomers interferes with fibril growth. Both abnormal fibrils and slower remodeling may contribute to the severe phenotype.in

Collagen XI nucleates self-assembly and limits lateral growth of cartilage fibrils

Fibrils of embryonic cartilage are heterotypic alloys formed by collagens II, IX, and XI and have a uniform diameter of approximately 20 nm. The molecular basis of this lateral growth control is poorly understood. Collagen II subjected to fibril formation in vitro produced short and tapered tactoids with strong D-periodic banding. The maximal width of these tactoids varied over a broad range. By contrast, authentic mixtures of collagens II, IX, and XI yielded long and weakly banded fibrils, which, strikingly, had a uniform width of about 20 nm. The same was true for mixtures of collagens II and XI lacking collagen IX as long as the molar excess of collagen II was less than 8-fold. At higher ratios, the proteins assembled into tactoids coexisting with cartilage-like fibrils. Therefore, diameter control is an inherent property of appropriate mixtures of collagens II and XI. Collagen IX is not essential for this feature but strongly increases the efficiency of fibril formation. Therefore, this protein may be an important stabilizing factor of cartilage fibrils.

Effect of dentin primers on the morphology, molecular composition and collagen conformation of acid-demineralized dentin in situ

OBJECTIVES

The purpose of this study was to assess the effect of two commercial primers and distilled water on the morphology, molecular composition and collagen conformation of acid-demineralized dentin in situ.

METHODS

Dentin specimens etched with Scotchbond Etchant were imaged by tapping mode AFM and analyzed by MIR-FTIR spectroscopy. They were then primed with Scotchbond Multi-Purpose Plus Primer, Scotchbond 1 Adhesive or distilled water and imaged and analyzed again. The chemical modifications induced on the uppermost 2 microns of primed dentin were studied after water and original primer subtraction. The conformational changes of type I collagen at this region were evaluated by deconvoluting the amide I band components. The absorbance ratio An(1655/1627) was used to semiquantitatively assess, on a relative basis, the extent of collagen denaturation.

RESULTS

All the priming treatments swelled the collapsed dentin collagen left after etching. No evidence of primary bonding was found after priming treatments, while approximately 50% of the conditioned dentin collagen appeared denatured. Treatment with distilled water did not change the status of denatured collagen, however, application of the commercial primers refolded the alpha-helix to approximately 95% of the extent found on the native reference dentin.

SIGNIFICANCE

The dynamic response of dentin collagen to demineralization and priming treatments reveals the critical role of some primers in rapidly restoring the conformational status of acid-denatured collagen. Implementation of reactive adhesive groups in alpha-helix recovery may provide an associative means of modifying the mechanical properties of the demineralized collagen based on the extent of their intermolecular bonding.

The collagen fibril: the almost crystalline structure

The structure of collagen fibrils has intrigued many investigators over the years. A crystal structure has been available for some time, but the crystal structure has been difficult to reconcile with other observations about collagen fibrils such as their roundness and their growth from paraboloidal tips. Several alternative models recently have been suggested, but none of them fully account for all the data. One recent approach to solving the fibrillar structure is to define specific binding sites on the collagen monomer that direct self-assembly of monomers into fibrils.

Inhibition of the self-assembly of collagen I into fibrils with synthetic peptides. Demonstration that assembly is driven by specific binding sites on the monomers

A series of experiments were carried out to test the hypothesis that the self-assembly of collagen I monomers into fibrils depends on the interactions of specific binding sites in different regions of the monomer. Six synthetic peptides were prepared with sequences found either in the collagen triple helix or in the N- or C-telopeptides of collagen I. The four peptides with sequences found in the telopeptides were found to inhibit self-assembly of collagen I in a purified in vitro system. At concentrations of 2.5 mM, peptides with sequences in the C-telopeptides of the alpha1(I) and alpha2(I) chain inhibited assembly at about 95%. The addition of the peptide with the alpha2-telopeptide sequence was effective in inhibiting assembly if added during the lag phase and early propagation phase but not later in the assembly process. Experiments with biotinylated peptides indicated that both the N- and C-telopeptides bound to a region between amino acid 776 and 822 of the alpha(I) chain. A fragment of nine amino acids with sequences in the alpha2-telopeptide was effective in inhibiting fibril assembly. Mutating two aspartates in the 9-mer peptide to serine had no effect on inhibition of fibril assembly, but mutating two tyrosine residues and one phenylalanine residue abolished the inhibitory action. Molecular modeling of the binding sites demonstrated favorable hydrophobic and electrostatic interactions between the alpha2telopeptide and residues 781-794 of the alpha(I) chain.

Cleavage of type I procollagen by human mast cell chymase initiates collagen fibril formation and generates a unique carboxyl-terminal propeptide

The ability of human mast cell chymase and tryptase to process procollagen was examined. Purified human intestinal smooth muscle cell procollagen was incubated with human mast cell tryptase or human mast cell chymase. Purified chymase, but not tryptase, exhibited procollagen proteinase activity in the presence of EDTA. Addition of purified porcine heparin over a range of 0.1-100 microg/ml did not affect either the rate or the products of procollagen chymase cleavage. The cleavage site of chymase on the pro-alpha1(I) collagen carboxyl terminus was found to be in the propeptide region at Leu-1248-Ser-1249. Cleavage at this site suggested that the collagen products would form fibrils and confirmed the production of a unique carboxyl-terminal propeptide. Turbidometric fibril formation assay demonstrated de novo formation of chymase-generated collagen fibrils with characteristic lag, growth, and plateau phases. When observed by dark field microscopy, these fibrils were similar to fibrils formed by the action of procollagen proteinases. Thus, mast cell chymase, but not tryptase, exhibits procollagen peptidase-like activity as evidenced by its ability to process procollagen to fibril-forming collagen with concurrent formation of a unique carboxyl-terminal propeptide. These data demonstrate that mast cell chymase has a potential role in the regulation of collagen biosynthesis and in the pathogenesis of fibrosis.

Reduction of type V collagen using a dominant-negative strategy alters the regulation of fibrillogenesis and results in the loss of corneal-specific fibril morphology

A number of factors have been implicated in the regulation of tissue-specific collagen fibril diameter. Previous data suggest that assembly of heterotypic fibrils composed of two different fibrillar collagens represents a general mechanism regulating fibril diameter. Specifically, we hypothesize that type V collagen is required for the assembly of the small diameter fibrils observed in the cornea. To test this, we used a dominant-negative retroviral strategy to decrease the levels of type V collagen secreted by chicken corneal fibroblasts. The chicken alpha 1(V) collagen gene was cloned, and retroviral vectors that expressed a polycistronic mRNA encoding a truncated alpha 1(V) minigene and the reporter gene LacZ were constructed. The efficiency of viral infection was 30-40%, as determined by assaying beta-galactosidase activity. To assess the expression from the recombinant provirus, Northern analysis was performed and indicated that infected fibroblasts expressed high steady-state levels of retroviral mRNA. Infected cells synthesized the truncated alpha 1(V) protein, and this was detectable only intracellularly, in a distribution that colocalized with lysosomes. To assess endogenous alpha 1(V) protein levels, infected cell cultures were assayed, and these consistently demonstrated reductions relative to control virus-infected or uninfected cultures. Analyses of corneal fibril morphology demonstrated that the reduction in type V collagen resulted in the assembly of large-diameter fibrils with a broad size distribution, characteristics similar to fibrils produced in connective tissues with low type V concentrations. Immunoelectron microscopy demonstrated the amino-terminal domain of type V collagen was associated with the small-diameter fibrils, but not the large fibrils. These data indicate that type V collagen levels regulate corneal fibril diameter and that the reduction of type V collagen is sufficient to alter fibril assembly so that abnormally large-diameter fibrils are deposited into the matrix.

Characterization of collagen fibril segments from chicken embryo cornea, dermis and tendon

The cornea, dermis and tendon have extracellular matrix architectures with differences in fibril diameter, packing and organization. An early step in fibril assembly is the formation of a striated fibril of discrete length (segment). Fibril segments were isolated from developing chicken cornea, dermis and tendon by physical disruption and the structure characterized. In all three tissues, intact but relatively short fibril lengths were isolated. These segments were asymmetric, having long (alpha) and short (beta) tapered ends. They were also centrosymmetric with respect to molecular packing. Segments isolated from 12- to 16-day corneas, dermis and tendons had identical structures, but their lengths and diameters were distinct. We propose that the increase in length is, at least in part, the result of lateral associations of adjacent segments. In the developing tendon, there is a rapid increase in length and diameter between day 16 and 17, while in the dermis the increase is more linear with respect to time. In the cornea, the fibril segments grow longer, but their diameters remain constant. Disruption of corneas in phosphate-buffered saline yielded larger diameter segments than seen in situ, while tendon or dermis maintained tissue-specific diameters. When corneas were disrupted in buffers that stabilized the water layer associated with the collagen molecules or containing the corneal proteoglycans, then tissue-specific diameters were maintained. These data suggest differences in the stabilization of segments during growth in tissues where diameter increases versus those where diameter remains constant, and this may be related to collagen-proteoglycan interactions.

Assembly in vitro of thin and thick fibrils of collagen II from recombinant procollagen II. The monomers in the tips of thick fibrils have the opposite orientation from monomers in the growing tips of collagen I fibrils

Human type II procollagen was prepared in a recombinant system and cleaved to pC-collagen II by procollagen N-proteinase. The pC-collagen II was then used as a substrate to generate collagen II fibrils by cleavage with procollagen C-proteinase at 37 degrees C. Electron microscopy of the fibrils demonstrated that, at the early stages of fibril assembly, very thin fibrils were formed. As the system approached equilibrium over 7-12 h, however, the thin fibrils were largely but not completely replaced by thick fibrils that had diameters of about 240 nm and a distinct D-period banding pattern. One typical fibril was photographed and analyzed in its entirety. The fibril was 776 D-periods (52 microM) long. It had a central shaft with a uniform diameter that was about 516 D-periods long and two tips of about 100 D-periods each. Most of the central shaft had a symmetrical banding pattern flanked by two transition regions of about 30 D-periods each. Measurements by scanning transmission electron microscopy demonstrated that the mass per unit length from the tips to the shafts increased linearly over approximately 100 D-periods from the fibril end. The linear increase in mass per unit length was consistent with previous observations for collagen I fibrils and established that the tips of collagen II also had a near paraboloidal shape. However, the orientation of monomers in the tips differed from the tips of collagen I fibrils in that the C termini instead of the N termini were directed toward the tips. The thin fibrils that were present at early stages of assembly and at equilibrium were comparable to the collagen II fibrils seen in embryonic tissues and probably represented intermediates on the pathway of thick fibrils formation. The results indicated that the molecular events in the self-assembly of collagen II fibrils are apparently similar to those in self-assembly of collagen I fibrils, but that there are also important differences in the structural information contained in collagen I and collagen II monomers.

Collagen fibril formation

Collagen is most abundant in animal tissues as very long fibrils with a characteristic axial periodic structure. The fibrils provide the major biomechanical scaffold for cell attachment and anchorage of macromolecules, allowing the shape and form of tissues to be defined and maintained. How the fibrils are formed from their monomeric precursors is the primary concern of this review. Collagen fibril formation is basically a self-assembly process (i.e. one which is to a large extent determined by the intrinsic properties of the collagen molecules themselves) but it is also sensitive to cell-mediated regulation, particularly in young or healing tissues. Recent attention has been focused on "early fibrils' or "fibril segments' of approximately 10 microns in length which appear to be intermediates in the formation of mature fibrils that can grow to be hundreds of micrometers in length. Data from several laboratories indicate that these early fibrils can be unipolar (with all molecules pointing in the same direction) or bipolar (in which the orientation of collagen molecules reverses at a single location along the fibril). The occurrence of such early fibrils has major implications for tissue morphogenesis and repair. In this article we review the current understanding of the origin of unipolar and bipolar fibrils, and how mature fibrils are assembled from early fibrils. We include preliminary evidence from invertebrates which suggests that the principles for bipolar fibril assembly were established at least 500 million years ago.

Type V collagen: molecular structure and fibrillar organization of the chicken alpha 1(V) NH2-terminal domain, a putative regulator of corneal fibrillogenesis

Previous work from our laboratories has demonstrated that: (a) the striated collagen fibrils of the corneal stroma are heterotypic structures composed of type V collagen molecules coassembled along with those of type I collagen, (b) the high content of type V collagen within the corneal collagen fibrils is one factor responsible for the small, uniform fibrillar diameter (25 nm) characteristic of this tissue, (c) the completely processed form of type V collagen found within tissues retains a large noncollagenous region, termed the NH2-terminal domain, at the amino end of its alpha 1 chain, and (d) the NH2-terminal domain may contain at least some of the information for the observed regulation of fibril diameters. In the present investigation we have employed polyclonal antibodies against the retained NH2-terminal domain of the alpha 1(V) chain for immunohistochemical studies of embryonic avian corneas and for immunoscreening a chicken cDNA library. When combined with cDNA sequencing and molecular rotary shadowing, these approaches provide information on the molecular structure of the retained NH2-terminal domain as well as how this domain might function in the regulation of fibrillar structure. In immunofluorescence and immunoelectron microscopy analyses, the antibodies against the NH2-terminal domain react with type V molecules present within mature heterotypic fibrils of the corneal stroma. Thus, epitopes within at least a portion of this domain are exposed on the fibril surface. This is in marked contrast to mAbs which we have previously characterized as being directed against epitopes located in the major triple helical domain of the type V molecule. The helical epitopes recognized by these antibodies are antigenically masked on type V molecules that have been assembled into fibrils. Sequencing of the isolated cDNA clones has provided the conceptual amino acid sequence of the entire amino end of the alpha 1(V) procollagen chain. The sequence shows the location of what appear to be potential propeptidase cleavage sites. One of these, if preferentially used during processing of the type V procollagen molecule, can provide an explanation for the retention of the NH2-terminal domain in the completely processed molecule. The sequencing data also suggest that the NH2-terminal domain consists of several regions, providing a structure which fits well with that of the completely processed type V molecule as visualized by rotary shadowing.

Growing tips of type I collagen fibrils formed in vitro are near-paraboloidal in shape, implying a reciprocal relationship between accretion and diameter

Collagen fibrils generated in vitro at 37 degrees C by enzymic removal of C-terminal propeptides from type I pC-collagen (an intermediate in the normal processing of type I procollagen to collagen containing the C-terminal propeptides but not the N-terminal propeptides) display shape polarity, with one tip fine tapered and the other coarse tapered. Mass measurements by scanning transmission electron microscopy show that the mass per unit length along both kinds of tip increases roughly linearly over distances of approximately 100 D periods from the fibril end [D (axial periodicity) = 67 nm]. The fine tips of fibrils of widely differing lengths exhibit near-identical mass distributions, the mass in all cases increasing at the rate of approximately 17 molecules per D period, irrespective of fibril length. Coarse tips display less regular behavior. These results show that (i) the shape of a fine tip is not conical but resembles more closely a paraboloid of revolution, and (ii) for this shape to be maintained throughout growth, accretion (rate of mass uptake per unit area) cannot everywhere be the same on the surface of the tip but must decrease as the diameter increases. To a first approximation, accretion alpha (diameter)-1.

Helical model of nucleation and propagation to account for the growth of type I collagen fibrils from symmetrical pointed tips: a special example of self-assembly of rod-like monomers

A model was developed to account for the recent observations indicating that type I collagen fibrils assembled in vivo grow from symmetrical pointed tips. The essential features of the model are (i) a distinctive structural nucleus forms at each end of a growing fibril and growth of the fibril then proceeds by propagation of the two structural nuclei, (ii) the two structural nuclei have similar spiral or helical conformations, and (iii) assembly of each structural nucleus requires two kinds of specific binding steps defined as 3.4 D-period and 0.4 D-period overlaps, but propagation of the nucleus requires only the 3.4 D-period binding step.