A continuous perfusion bioreactor for long-term bone marrow culture

Chondrocytes, Mesenchymal Stem Cells, and Their Combination in Articular Cartilage Regenerative Medicine

Articular cartilage (AC) is a highly organized connective tissue lining, covering the ends of bones within articulating joints. Its highly ordered structure is essential for stable motion and provides a frictionless surface easing load transfer. AC is vulnerable to lesions and, because it is aneural and avascular, it has limited self-repair potential which often leads to osteoarthritis. To date, no fully successful treatment for osteoarthritis has been reported. Thus, the development of innovative therapeutic approaches is desperately needed. Autologous chondrocyte implantation, the only cell-based surgical intervention approved in the United States for treating cartilage defects, has limitations because of de-differentiation of articular chondrocytes (AChs) upon in vitro expansion. De-differentiation can be abated if initial populations of AChs are co-cultured with mesenchymal stem cells (MSCs), which not only undergo chondrogenesis themselves but also support chondrocyte vitality. In this review we summarize studies utilizing AChs, non-AChs, and MSCs and compare associated outcomes. Moreover, a comprehensive set of recent human studies using chondrocytes to direct MSC differentiation, MSCs to support chondrocyte re-differentiation and proliferation in co-culture environments, and exploratory animal intra- and inter-species studies are systematically reviewed and discussed in an innovative manner allowing side-by-side comparisons of protocols and outcomes. Finally, a comprehensive set of recommendations are made for future studies.

Bone-marrow mimicking biomaterial niches for studying hematopoietic stem and progenitor cells

This review discusses the considerations and approaches that have been employed for designing biomaterial based cultures for replicating the hematopoietic stem and progenitor cell niche.

The construction of an in vitro three-dimensional hematopoietic microenvironment for mouse bone marrow cells employing porous carriers

Spatial development of mouse bone marrow cellsemploying porous carriers was investigated in order todesign a bioreactor with a three-dimensionalhematopoietic microenvironment. Three types of porouscarriers were used for examining the spatialdevelopment of anchorage-dependent primary stromalcells as feeder cells. Stromal cells were found tospread well at a high density on a polyester nonwovendisc carrier (Fibra cel (FC)) under a scanningelectron microscope, while cells on porous cellulosebeads (Microcube (MC), 500 mum pore diameter)spread at a low density; cells on another type ofcellulose porous beads (CPB, 100 mum pore diameter)were globular. Mouse bone marrow cells wereinoculated to dishes containing three types of porouscarriers which shared more than 30% of the bottomsurface in a dish. The concentration of stromal cellsin the well containing FC was lower than that on theother two carriers. However, the weekly output oftotal hematopoietic cell (suspension cells) increasedbetween day 21 and 28 in the culture using FC while itdecreased monotonously in the cultures by use of theother two carriers. The proportion of progenitorcells (BFU-E, CFU-GM) in the total hematopoietic cellpopulation, after showing an initial decrease,increased after 1 week in the culture using FC whilethe proportion decreased monotonously to zero in thecultures using MC and CPB.

Review: tissue engineering: reconstitution of human hematopoiesis ex vivo

The reconstruction of functioning human tissues ex vivo is becoming an important part of biotechnology. There are compelling scientific, clinical, and biotechnological reasons for fully or partially reconstituting human tissues such as skin, bone marrow, and liver ex vivo. In particular, bone marrow is a tissue of much importance, and there are significant societal and health benefits derived from a successfully constructed ex vivo hematopoietic system. In this article, we review the current status of this effort. The topics covered include the current understanding of the biology of human hematopoiesis, the motivation for reconstructing it ex vivo, the current state of ex vivo human hematopoietic cultures, the development of important metrics to judge culture performance, and an approach based on in vivo mimetics to accomplish this goal. We discuss some applications of functional ex vivo hematopoietic cultures and the biological and engineering challenges that face research in this area.

Role of nutrient supply on cell growth in bioreactor design for tissue engineering of hematopoietic cells

In the present study, a dynamic mathematical model for the growth of granulocyte progenitor cells in the hematopoietic process is developed based on the principles of diffusion and chemical reaction. This model simulates granulocyte progenitor cell growth and oxygen consumption in a three-dimensional (3-D) perfusion bioreactor. Material balances on cells are coupled to the nutrient balances in 3-D matrices to determine the effects of transport limitations on cell growth. The method of volume averaging is used to formulate the material balances for the cells and the nutrients in the porous matrix containing the cells. All model parameters are obtained from the literature. The maximum cell volume fraction reached when oxygen is depleted in the cell layer at 15 days and is nearly 0.63, corresponding to a cell density of 2.25 x 10(8) cells/mL. The substrate inhibition kinetics for cell growth lead to complex effects with respect to the roles of oxygen concentration and supply by convection and diffusion on cell growth. Variation in the height of the liquid layer above the cell matrix where nutrient supply is introduced affected the relative and absolute amounts of oxygen supply by hydrodynamic flow and by diffusion across a gas permeable FEP membrane. Mass transfer restrictions of the FEP membrane are considerable, and the supply of oxygen by convection is essential to achieve higher levels of cell growth. A maximum growth rate occurs at a specific flow rate. For flow rates higher than this optimal, the high oxygen concentration led to growth inhibition and for lower flow rates growth limitations occur due to insufficient oxygen supply. Because of the nonlinear effects of the autocatalytic substrate inhibition growth kinetics coupled to the convective transport, the rate of growth at this optimal flow rate is higher than that in a corresponding well-mixed reactor where oxygen concentration is set at the maximum indicated by the inhibitory kinetics.

Cell processing engineering for ex-vivo expansion of hematopoietic cells

The cell processing engineering for ex vivo expansion of hematopoietic cells is reviewed. All hematopoietic cells of different lineages and/or at various stages of differentiation are derived from the same precursor, pluripotent hematopoietic stem cells. Bone marrow stromal cells promote and regulate the self-renewal, commitment, differentiation, and proliferation of stem cells and progenitors through their secreted extracellular matrices and cytokine environment in the hematopoietic microenvironment. Although stroma-mediated hematopoiesis has been studied in vitro using the Dexter culture system in tissue culture flasks, hematopoiesis in the Dexter culture system is almost limited to a granulocyte lineage and the system could not expand primitive cells. The addition of large amounts of cytokines to the culture of hematopoietic cells enabled their expansion, but is too expensive. Some clonal stromal cell lines have been established from the Dexter culture of murine bone marrow cells in order to simplify and stimulate the ex vivo expansion of hematopoietic cells. In order to solve the problem regarding the usage of exogeneic stromal cell lines, a novel membrane-separated coculture system, in which stromal cells adhere onto the lower surface of a porous membrane and hematopoietic cells are incubated on the upper surface of the membrane, was proposed. In order to mimic the contact between stromal and hematopoietic cells in vivo in the bone marrow, several types of three-dimensional (3-D) culture of hematopoietic cells were developed. The 3-D coculture of hematopoietic cells with spatial development of stromal cells in nonwoven fabrics enabled the expansion of progenitors without cytokine addition. Progenitors in cord blood mononucleated cells were also successfully expanded without the addition in the 3-D coculture with primary human bone marrow stromal cells in 3-D. Heparin addition to the 3-D coculture and coating the nonwoven fabrics with N-(O-beta-(6-O-sulfogalactopyranosyl)-6-oxyhexyl)-3,5-bis(dodecyloxy)-benzamide further increased the number of progenitors.

3D culture of murine hematopoietic cells with spatial development of stromal cells in nonwoven fabrics

BACKGROUND

The in vivo hematopoietic microenvironment is composed of stromal cells and extracellular matrix in a 3D configuration. We have created a 3D microenvironment in vitro, employing spatial development of stromal cells in a nonwoven fabric porous carrier, Fibra-cel (FC). We compared its performance with that of a 2D microenvironment.

METHODS

Primary murine BM cells were inoculated on the layers of stromal cells prepared in FC (3D) or on a dish (2D) and cultured for 7-21 days. The hematopoietic cells harvested from the cultures were evaluated by colony-forming unit (CFU) assay and transplantation to sub lethally irradiated mice.

RESULTS

The maximum stromal cell concentration in the 2D culture was higher than that in the 3D culture. However, the hematopoietic cell concentration in the 3D culture was kept at a higher level than that in the 2D culture. The number of CFU-mix increased five times during 3D cultivation, but decreased in the 2D culture. The engraftment percentage of 3D cultured cells was comparable with that of fresh cells, and markedly higher than that of 2D cultured cells.

DISCUSSION

The 3D culture constructed with FC and stromal cells was clearly superior to 2D culture because hematopoietic progenitor cells were expanded without the addition of cytokines and the content of hematopoietic stem cells was maintained.

Spatial development of the cultivation of a bone marrow stromal cell line in porous carriers

The spatial development of the cultivation of a bone marrow stromal cell line (SR-4987) in porous carriers was investigated in order to construct a three-dimensional hematopoietic culture system. Low-rate continuous agitation, 20 rpm, was an appropriate method to achieve initial adhesion of cells onto a cellulose porous beads (CPB, 100 mum pore diameter) in a spinner bottle, compared with other methods such as centrifugation and intermittent agitation. Cell growth with continuous agitation at 70 rpm after initial cell adhesion was not inferior to that at 20 rpm. A 2- and 10-fold increase in the inoculum cell concentration for CPB and another type of porous cellulose beads (Micro-cube (MC), 500 mum pore diameter) resulted in a 1.2- and 2-fold increase in final cell concentrationm, respectively. Cells attached to the MC beads and a polyester nonwoven dic (Fibra-cell (FC)) could grow and spread well on the carriers and a fibroblast-like shape was observed under scanning electron microscopy while the cells on CPB were globular. The flatness and inner surface area of these carriers may be the reason for the differences in cell morphology.

Bioreactor perfusion system for the long-term maintenance of tissue-engineered skeletal muscle organoids

Three-dimensional skeletal muscle organ-like structures (organoids) formed in tissue culture by fusion of proliferating myoblasts into parallel networks of long, unbranched myofibers provide an in vivo-like model for examining the effects of growth factors, tension, and space flight on muscle cell growth and metabolism. To determine the feasibility of maintaining either avian or mammalian muscle organoids in a commercial perfusion bioreactor system, we measured metabolism, protein turnover. and autocrine/paracrine growth factor release rates. Medium glucose was metabolized at a constant rate in both low-serum- and serum-free media for up to 30 d. Total organoid noncollagenous protein and DNA content decreased approximately 22-28% (P < 0.05) over a 13-d period. Total protein synthesis rates could be determined accurately in the bioreactors for up to 30 h and total protein degradation rates could be measured for up to 3 wk. Special fixation and storage conditions necessary for space flight studies were validated as part of the studies. For example, the anabolic autocrine/paracrine skeletal muscle growth factors prostaglandin F2alpha (PGF2alpha) and insulin-like growth factor-1 (IGF-1) could be measured accurately in collected media fractions, even after storage at 37 degrees C for up to 10 d. In contrast, creatine kinase activity (a marker of cell damage) in collected media fractions was unreliable. These results provide initial benchmarks for long-term ex vivo studies of tissue-engineered skeletal muscle.

Expansion of human bone marrow progenitor cells in a high cell density continuous perfusion system

We describe here a continuous perfusion bioreactor system that enables a population of unselected human mononuclear bone marrow cells obtained from adult donors to expand up to 20 to 25-fold over a two-week period. Colony-forming units of granulocyte-macrophage (CFU-GM) progenitor cells expand 10 to 30-fold. These expansions depend on the gas phase oxygen concentration, the seeding density and time of cell harvest. Under operating conditions that allow for good cell proliferation, 3 to 4 million mononuclear cells can be obtained per square centimeter, with 0.5 to 0.8% being progenitor cells. Autologous human sera supported cell expansion as efficiently as animal sera. Increasing the size of the perfusion system to produce a clinically meaningful number of CFU-GMs could have important applications in bone marrow transplantation therapies.