Permeability assessment of capsules for islet transplantation

Smart Microcapsules with Molecular Polarity- and Temperature-Dependent Permeability

Microcapsules with molecule-selective permeation are appealing as microreactors, capsule-type sensors, drug and cell carriers, and artificial cells. To accomplish molecular size- and charge-selective permeation, regular size of pores and surface charges have been formed in the membranes. However, it remains an important challenge to provide advanced regulation of transmembrane transport. Here, smart microcapsules are designed that provide molecular polarity- and temperature-dependent permeability. With capillary microfluidic devices, water-in-oil-in-water (W/O/W) double-emulsion drops are prepared, which serve as templates to produce microcapsules. The oil shell is composed of two monomers and dodecanol, which turns to a polymeric framework whose continuous voids are filled with dodecanol upon photopolymerization. One of the monomers provides mechanical stability of the framework, whereas the other serves as a compatibilizer between growing polymer and dodecanol, preventing macrophase separation. Above melting point of dodecanol, molecules that are soluble in the molten dodecanol are selectively allowed to diffuse across the shell, where the rate of transmembrane transport is strongly influenced by partition coefficient. The rate is drastically lowered for temperatures below the melting point. This molecular polarity- and temperature-dependent permeability renders the microcapsules potentially useful as drug carriers for triggered release and contamination-free microreactors and microsensors.

Considerations in binding diblock copolymers on hydrophilic alginate beads for providing an immunoprotective membrane

Alginate-based microcapsules are being proposed for treatment of many types of diseases. A major obstacle however in the successes is that these capsules are having large lab-to-lab variations. To make the process more reproducible, we propose to cover the surface of alginate capsules with diblock polymers that can form polymer brushes. In the present study, we describe the stepwise considerations for successful application of diblock copolymer of polyethylene glycol (PEG) and poly-l-lysine (PLL) on the surface of alginate beads. Special procedures had to be designed as alginate beads are hydrophilic and most protocols are designed for hydrophobic biomaterials. The successful attachment of diblock copolymer and the presence of PEG blocks on the surface of the capsules were studied by fluorescence microscopy. Longer time periods, that is, 30–60 min, are required to achieve saturation of the surface. The block lengths influenced the strength of the capsules. Shorter PLL blocks resulted in less stable capsules. Adequate permeability of the capsules was achieved with poly(ethylene glycol)-block-poly(l-lysine hydrochloride) (PEG₄₅₄-b-PLL₁₀₀) diblock copolymers. The capsules were a barrier for immunoglobulin G. The PEG₄₅₄-b-PLL₁₀₀ capsules have similar mechanical properties as PLL capsules. Minor immune activation of nuclear factor κB in THP-1 monocytes was observed with both PLL and PEG₄₅₄-b-PLL₁₀₀ capsules prepared from purified alginate. Our results show that we can successfully apply block copolymers on the surface of hydrophilic alginate beads without interfering with the physicochemical properties.

Characteristics of Poly-l-Ornithine-coated alginate microcapsules

Poly-L-Lysine (PLL) is the most widely used biomaterial for providing perm-selectivity in alginate microcapsules for islet transplantation. We had previously reported that Poly-L-Ornithine (PLO) is less immunogenic than PLL, and in the present study, we have compared the physical characteristics of PLO- and PLL-coated hollow alginate microcapsules. Microspheres made with 1.5% alginate were divided into 2 groups that were first coated with either 0.1% PLO or PLL, followed by a second coating with 0.25% alginate. After liquefaction of the inner alginate core with sodium citrate, the microcapsules were washed with saline and used for experiments. Pore size exclusion studies were performed with FITC-labeled lectins incubated with encapsulated pig islets followed by examination for fluorescence activity. Mechanical strength was assessed by an osmotic pressure test and by 36 h of mechanical agitation of microcapsules with inert soda lime beads. The pore size exclusion limit of microcapsules after 20 min of coating was significantly smaller with PLO. While the mean +/- SEM diameter of PLL-coated microcapsules increased from 718+/-17 to 821 +/- 17 microm (p < 0.05) during 14 days incubation at 37 degrees C, the PLO group did not change in size. Also, PLL group had a higher percentage of broken capsules (52.7 +/- 4.9%) compared to 3.1 +/- 2.05% for PLO capsules (p < 0.0001,n = 6). We conclude that PLO-coated alginate microcapsules are mechanically stronger and provide better perm-selectivity than PLL-coated microcapsules.

The therapeutic potential of islet cell transplant in the treatment of diabetes

Diabetic patients requiring insulin treatment are at an increased risk of developing chronic complications affecting the eye, kidney and heart as well as other disabilities, such as neurological and vascular disease. The Diabetes Control and Complications Trial (DCCT) showed that the development of these complications can be profoundly reduced or even prevented by strict glycaemic control through intensive insulin therapy. The DCCT study, which was concluded in 1993, administered intensive insulin treatment either by multiple (three or four per day) insulin injections or by an external insulin pump. However, it is both stressful and difficult to achieve effective glycaemic control by these methods. Furthermore, intensive insulin administration imposes a significant danger of hypoglycaemia to patients receiving this treatment. Biological replacement of the destroyed insulin-producing B-cells of pancreatic islets, with normal functioning islet transplants, remains the best option with which to achieve strict glycaemic control in diabetic patients requiring insulin treatment. The ultimate goal in transplantation is the unlimited availability of organs/tissues to be transplanted in a simple procedure that requires little or no immunosuppression. Other obstacles have also contributed to the delay in islet transplantation becoming a clinical reality. There are now good methods for isolating long-term functional islets, and it has been proposed that these islets can be immunoisolated by microencapsulation to prevent transplant rejection, an approach that could easily lead to the use of islet xenografts in human diabetic patients. Therefore, the development of microencapsulated islets promises to solve the two major obstacles to clinical islet transplantation, transplant rejection and shortage of human islets. This technique has enormous potential as a viable treatment for diabetic patients requiring insulin therapy to achieve glycaemic control.

Bioartificial pancreas: materials, devices, function, and limitations

The term "bioartificial endocrine pancreas" (BEP) was introduced by Anthony Sun in 1980. It was in 1968, however, that Thomas Chang proposed the use of microencapsulated islets as artificial beta-cells. By applying a semipermeable membrane on the top of microcapsules, a system can be produced that is impermeable to viable islet cells and large effector molecules of the immune system, thus providing a protection for transplanted islets against rejection. Since then, the term BEP has not often appeared in papers. Instead, the term "bioartificial pancreas" (BAP) has gained widespread use. In a broader sense, BAP would include an application of suitable endocrine cells and protective polymeric vehicles, but not necessarily providing a filtration barrier of precisely defined properties (e.g., cells injected into a gel of hyaluronate).