Examination of Chlorin-Bacteriochlorin Energy-transfer Dyads as Prototypes for Near-infrared Molecular Imaging Probes†

Fluorescent imaging probes for in vivo ovarian cancer targeted detection and surgery

Ovarian cancer is the most lethal gynecological cancer, with a survival rate of approximately 40% at five years from the diagno. The first-line treatment consists of cytoreductive surgery combined with chemotherapy (platinum- and taxane-based drugs). To date, the main prognostic factor is related to the complete surgical resection of tumor lesions, including occult micrometastases. The presence of minimal residual diseases not detected by visual inspection and palpation during surgery significantly increases the risk of disease relapse. Intraoperative fluorescence imaging systems have the potential to improve surgical outcomes. Fluorescent tracers administered to the patient may support surgeons for better real-time visualization of tumor lesions during cytoreductive procedures. In the last decade, consistent with the discovery of an increasing number of ovarian cancer-specific targets, a wide range of fluorescent agents were identified to be employed for intraoperatively detecting ovarian cancer. Here, we present a collection of fluorescent probes designed and developed for fluorescence-guided ovarian cancer surgery. Original articles published between 2011 and November 2022 focusing on fluorescent probes, currently under preclinical and clinical investigation, were searched in PubMed. The keywords used were targeted detection, ovarian cancer, fluorescent probe, near-infrared fluorescence, fluorescence-guided surgery, and intraoperative imaging. All identified papers were English-language full-text papers, and probes were classified based on the location of the biological target: intracellular, membrane, and extracellular.

Simultaneous multicolor imaging of lymph node chains using hydroporphyrin-doped near-infrared-emitting polymer dots

Aim: Evaluation of lymphatic drainage can be challenging to differentiate between separate drainage basins because only one 'color' is typically employed in sentinel node studies. This study aimed to test the feasibility of multicolor in vivo lymphangiography using newly developed organic polymer dots. Materials & methods: Biocompatible, purely organic, hydroporphyrin-doped near-infrared-emitting polymer dots were developed and evaluated for in vivo multicolor imaging in mouse lymph nodes. Results & conclusion: The authors demonstrated successful multicolor in vivo fluorescence lymphangiography using polymer dots, each tuned to a different emission spectrum. This allows minimally invasive visualization of at least four separate lymphatic drainage basins using fluorescent nanoparticles, which have the potential for clinical translation.

Weakly conjugated bacteriochlorin-bacteriochlorin dyad: Synthesis and photophysical properties

Dyads containing two near-infrared absorbing and emitting bacteriochlorins with distinct spectral properties have been prepared and characterized by absorption, emission, and transient-absorption spectroscopies. The dyads exhibit ultrafast ([Formula: see text]3 ps) energy transfer from the bacteriochlorin with the higher-energy S1 state to the bacteriochlorin emitting at the longer wavelength. The dyads exhibit strong fluorescence and relatively long excited state lifetimes ([Formula: see text]4 ns) in both non-polar and polar solvents, which indicates negligible photoinduced electron transfer between the two bacteriochlorins in the dyads. These dyads are thus attractive for the development of light-harvesting arrays and fluorophores for in vivo bioimaging.

Conjugated-linker dependence of the photophysical properties and electronic structure of chlorin dyads

The synthesis, photophysical properties and electronic structure of seven new chlorin dyads and associated benchmark monomers are described. Each dyad contains two identical chlorins linked at the macrocycle [Formula: see text]-pyrrole 13-position. The extent of electronic communication between chlorin constituents depends on the nature of the conjugated linker. The communication is assessed by modification of prominent ground-state absorption and redox properties, rate constants and yields of excited-state decay processes, and molecular-orbital characteristics. Relative to the benchmark monomers, the chlorin dyads in toluene exhibit a substantial bathochromic shift of the long-wavelength absorption band (30 nm average), two-fold increased radiative rate constant [average (10 ns)[Formula: see text] vs. (22 ns)[Formula: see text]], reduced singlet excited-state lifetimes (average 5.0 ns vs. 8.2 ns), and increased fluorescence quantum yields (average 0.56 vs. 0.42). The excited-state lifetime and fluorescence yield for the chlorin dyad with a benzothiadiazole linker are reduced substantially in benzonitrile vs. toluene due largely to [Formula: see text]25-fold accelerated internal conversion. The results aid design strategies for molecular architectures that may find utility in solar-energy conversion and photomedicine.

Meso-Biphenyl-Linked, Near- and Far-Infrared Emitting, Chlorin and Bacteriochlorin Dimers: Synthesis, Excitation Transfer, and Singlet Oxygen Production

A series of meso-biphenyl linked chlorin and bacteriochlorin dimers, derived from naturally occurring chlorophyll (Chl-a) and bacteriochlorophyll (BChl-a) were synthesized in 32 % to 44 % yields and characterized, as photosynthetic antenna mimics, and a new class of singlet oxygen producing agents. The dimers are characterized by absorption, fluorescence, electrochemical, spectroelectrochemical and computational methods to evaluate their physico-chemical properties, and to identify ground and excited state interactions. Evidence of excited energy exchange among the chromophores in the dimer is derived from femtosecond transient absorption spectral studies. Rate constants for excitation hopping were in the order of 1011  s-1 , indicating occurrence of efficient processes. Nanosecond transient absorption studies confirmed relaxation of the singlet excited chlorin and bacteriochlorin dimers to their corresponding triplet states (3 Chl* and 3 Bchl*). As predicted by the established energy level diagrams, both 3 Chl* and 3 Bchl* are shown to be capable of producing singlet oxygen with appreciable quantum yields (ϕSO ∼0.3).

Metalloporphyrins in Medicine: From History to Recent Trends

The history of metalloporphyrins dates back more than 200 years ago. Metalloporphyrins are excellent catalysts, capable of forming supramolecular systems, participate in oxygen photosynthesis, transport, and used as contrast agents or superoxide dismutase mimetics. Today, metalloporphyrins represent complexes of conjugated π-electron system and metals from the entire periodic system. However, the effect of these compounds on living systems has not been fully understood, and researchers are exploring the properties of metalloporphyrins thereby extending their further application. This review provides an overview of the variety of metalloporphyrins that are currently used in different medicine fields and how metalloporphyrins became the subject of scientists' interest. Currently, metalloporphyrins utilization has expanded significantly, which gave us an opprotunuty to summarize recent progress in metalloporphyrins derivatives and prospects of their application in the treatment and diagnosis of different diseases.

Activatable Near-Infrared Fluorescence Imaging Using PEGylated Bacteriochlorin-Based Chlorin and BODIPY-Dyads as Probes for Detecting Cancer

Near infrared (NIR) fluorescent probes are attractive tools for biomedical in vivo imaging due to the relatively deeper tissue penetration and lower background autofluorescence. Activatable probes are turned on only after binding to their target, further improving target to background ratios. However, the number of available activatable NIR probes is limited. In this study, we introduce two types of activatable NIR fluorophores derived from bacteriochlorin: chlorin-bacteriochlorin energy-transfer dyads and boron-dipyrromethene (BODIPY)-bacteriochlorin energy-transfer dyads. These fluorophores are characterized by multiple narrow excitation bands with relatively strong emission in the NIR. Targeted bacteriochlorin-based antibody or peptide probes have been previously limited by aggregation after conjugation. Polyethylene glycol (PEG) chains were added to improve the hydrophilicity without altering pharmacokinetics of the targeting moieties. These PEGylated bacteriochlorin-based activatable fluorophores have potential as targeted activatable, multicolor NIR fluorescent probes for in vivo applications.

Expanding π-Conjugation in Chlorins Using Ethenyl Linker

A series of chlorin monomers and dyads has been prepared to probe the effect of ethenyl vs ethynyl linkers on the electronic conjugation and optical properties in resulting derivatives. Styryl-substituted chlorins have been prepared either by a Heck reaction or by microwave-assisted olefin metathesis, while β-β ethenyl-linked dyads have been synthesized from the corresponding vinyl-substituted chlorin monomer using microwave-assisted olefin metathesis. It has been found that when an ethenyl linker is connected at the β-position of chlorin it provides stronger electronic conjugation than an ethynyl one, which is manifested by a greater bathochromic shift of the longest wavelength absorption (Q _y) and emission bands. Stronger electronic coupling is particularly evident for dyads, where ethenyl-linked dyad exhibits a strong near-IR absorption band emission (λ_abs = 707 nm, λ_em = 712 nm, Φ_f = 0.45), compared to the deep-red absorption and emission of a corresponding ethynyl-linked dyad (λ_abs = 689 nm, λ_em = 691 nm, Φ_f = 0.48). The reactivity of ethenyl-linked dyads with singlet oxygen is discussed as well. The results reported here provide further guidelines for molecular design of deep-red and near-IR absorbing and intensely emitting chlorin derivatives and chlorins with extended π-electronic conjugation for a variety of photonic applications.

BODIPY-Bacteriochlorin Energy Transfer Arrays: Toward Near-IR Emitters with Broadly Tunable, Multiple Absorption Bands

A series of energy transfer arrays, comprising a near-IR absorbing and emitting bacteriochlorin, and BODIPY derivatives with different absorption bands in the visible region (503-668 nm) have been synthesized. Absorption band of BODIPY was tuned by installation of 0, 1, or 2 styryl substituents [2-(2,4,6-trimethoxyphenyl)ethenyl], which leads to derivatives with absorption maxima at 503, 587, and 668 nm, respectively. Efficient energy transfer (>0.90) is observed for each dyad, which is manifested by nearly exclusive emission from bacteriochlorin moiety upon BODIPY excitation. Fluorescence quantum yield of each dyad in nonpolar solvent (toluene) is comparable with that observed for corresponding bacteriochlorin monomer, and is significantly reduced in solvent of high dielectric constants (DMF), most likely by photoinduced electron transfer. Given the availability of diverse BODIPY derivatives, with absorption between 500-700 nm, BODIPY-bacteriochlorin arrays should allow for construction of near-IR emitting agents with multiple and broadly tunable absorption bands. Solvent-dielectric constant dependence of Φf in dyads gives an opportunity to construct environmentally sensitive fluorophores and probes.

Amphiphilic BODIPY-Hydroporphyrin Energy Transfer Arrays with Broadly Tunable Absorption and Deep Red/Near-Infrared Emission in Aqueous Micelles

BODIPY-hydroporphyrin energy transfer arrays allow for development of a family of fluorophores featuring a common excitation band at 500 nm, tunable excitation band in the deep red/near-infrared window, and tunable emission. Their biomedical applications are contingent upon retaining their optical properties in an aqueous environment. Amphiphilic arrays containing PEG-substituted BODIPY and chlorins or bacteriochlorins were prepared and their optical and fluorescence properties were determined in organic solvents and aqueous surfactants. The first series of arrays contains BODIPYs with PEG substituents attached to the boron, whereas in the second series, PEG substituents are attached to the aryl at the meso positions of BODIPY. For both series of arrays, excitation of BODIPY at 500 nm results in efficient energy transfer to and bright emission of hydroporphyrin in the deep-red (640-660 nm) or near-infrared (740-760 nm) spectral windows. In aqueous solution of nonionic surfactants (Triton X-100 and Tween 20) arrays from the second series exhibit significant quenching of fluorescence, whereas properties of arrays from the first series are comparable to those observed in polar organic solvents. Reported arrays possess large effective Stokes shift (115-260 nm), multiple excitation wavelengths, and narrow, tunable deep-red/near-IR fluorescence in aqueous surfactants, and are promising candidates for a variety of biomedical-related applications.

Bioconjugatable, PEGylated Hydroporphyrins for Photochemistry and Photomedicine. Narrow-Band, Near-Infrared-Emitting Bacteriochlorins

Synthetic bacteriochlorins absorb in the near-infrared (NIR) region and are versatile analogues of natural bacteriochlorophylls. The utilization of these chromophores in energy sciences and photomedicine requires the ability to tailor their physicochemical properties, including the incorporation of units to impart water solubility. Herein, we report the synthesis, from two common bacteriochlorin building blocks, of five wavelength-tunable, bioconjugatable and water-soluble bacteriochlorins along with two non-bioconjugatable benchmarks. Each bacteriochlorin bears short polyethylene glycol (PEG) units as the water-solubilizing motif. The PEG groups are located at the 3,5-positions of aryl groups at the pyrrolic β-positions to suppress aggregation in aqueous media. A handle containing a single carboxylic acid is incorporated to allow bioconjugation. The seven water-soluble bacteriochlorins in water display Q_y absorption into the NIR range (679-819 nm), sharp emission (21-36 nm full-width-at-half-maximum) and modest fluorescence quantum yield (0.017-0.13). Each bacteriochlorin is neutral (non-ionic) yet soluble in organic (e.g., CH₂Cl₂, DMF) and aqueous solutions. Water solubility was assessed using absorption spectroscopy by changing the concentration ∼1000-fold (190-690 µM to 0.19-0.69 µM) with a reciprocal change in pathlength (0.1-10 cm). All bacteriochlorins showed excellent solubility in water, except for a bacteriochlorin-imide that gave slight aggregation at higher concentrations. One bacteriochlorin was conjugated to a mouse polyclonal IgG antibody for use in flow cytometry with compensation beads for proof-of-principle. The antibody conjugate of B2-NHS displayed a sharp signal upon ultraviolet laser excitation (355 nm) with NIR emission measured with a 730/45 nm bandpass filter. Overall, the study gives access to a set of water-soluble bacteriochlorins with desirable photophysical properties for use in multiple fields.

Effects of Strong Electronic Coupling in Chlorin and Bacteriochlorin Dyads

Achieving tunable, intense near-infrared absorption in molecular architectures with properties suitable for solar light harvesting and biomedical studies is of fundamental interest. Herein, we report the photophysical, redox, and molecular-orbital characteristics of nine hydroporphyrin dyads and associated benchmark monomers that have been designed and synthesized to attain enhanced light harvesting. Each dyad contains two identical hydroporphyrins (chlorin or bacteriochlorin) connected by a linker (ethynyl or butadiynyl) at the macrocycle β-pyrrole (3- or 13-) or meso (15-) positions. The strong electronic communication between constituent chromophores is indicated by the doubling of prominent absorption features, split redox waves, and paired linear combinations of frontier molecular orbitals. Relative to the benchmarks, the chlorin dyads in toluene show substantial bathochromic shifts of the long-wavelength absorption band (17-31 nm), modestly reduced singlet excited-state lifetimes (τS = 3.6-6.2 ns vs 8.8-12.3 ns), and increased fluorescence quantum yields (Φf = 0.37-0.57 vs 0.34-0.39). The bacteriochlorin dyads in toluene show significant bathochromic shifts (25-57 nm) and modestly reduced τS (1.6-3.4 ns vs 3.5-5.3 ns) and Φf (0.09-0.19 vs 0.17-0.21) values. The τS and Φf values for the bacteriochlorin dyads are reduced substantially (up to ∼20-fold) in benzonitrile. The quenching is due primarily to the increased S1 → S0 internal conversion that is likely induced by increased contribution of charge-resonance configurations to the S1 excited state in the polar medium. The fundamental insights gained into the physicochemical properties of the strongly coupled hydroporphyrin dyads may aid their utilization in solar-energy conversion and photomedicine.

Progress Towards Synthetic Chlorins with Graded Polarity, Conjugatable Substituents, and Wavelength Tunability

Advances in chlorin synthetic chemistry now enable the de novo preparation of diverse chlorin-containing molecular architectures. Five distinct molecular designs have been explored here, including hydrophobic bioconjugatable (oxo)chlorins; a hydrophilic bioconjugatable chlorin; a trans-ethynyl/iodochlorin building block; a set of chlorins bearing electron-rich (methoxy, dimethylamino, methylthio) groups at the 3-position; and a set of ten 3,13-disubstituted chlorins chiefly bearing groups with extended π-moieties. Altogether 23 new chlorins (17 targets, 6 intermediates) have been prepared. The challenge associated with molecular designs that encompass the combination of "hydrophilic, bioconjugatable and wavelength-tunable" chiefly resides in the nature of the hydrophilic unit.

Deep-red emissive BODIPY-chlorin arrays excitable with green and red wavelengths

We report here the synthesis and characterization of BODIPY-chlorin arrays containing a chlorin subunit, with tunable deep-red (641-685 nm) emission, and one or two BODIPY moieties, absorbing at 504 nm. Two types of arrays were examined: one where BODIPY moieties are attached through a phenylacetylene linker at the 13- or 3,13-positions of chlorin, and a second type where BODIPY is attached at the 10-position of chlorin through an amide linker. Each of the examined arrays exhibits an efficient (≥0.80) energy transfer from BODIPY to the chlorin moiety in both toluene and DMF and exhibits intense fluorescence of chlorin upon excitation of BODIPY at ∼500 nm. Therefore, the effective Stokes shift in such arrays is in the range of 140-180 nm. Dyads with BODIPY attached at the 10-position of chlorin exhibit a bright fluorescence in a range of solvents with different polarities (i.e., toluene, MeOH, DMF, and DMSO). In contrast to this, some of the arrays in which BODIPY is attached at the 3- or at both 3,13-positons of chlorin exhibit significant reduction of fluorescence in polar solvents. Overall, dyads where BODIPY is attached at the 10-position of chlorin exhibit ∼5-fold brighter fluorescence than corresponding chlorin monomers, upon excitation at 500 nm.

Rational design of fluorophores for in vivo applications

Several classes of small organic molecules exhibit properties that make them suitable for fluorescence in vivo imaging. The most promising candidates are cyanines, squaraines, boron dipyrromethenes, porphyrin derivatives, hydroporphyrins, and phthalocyanines. The recent designing and synthetic efforts have been dedicated to improving their optical properties (shift the absorption and emission maxima toward longer wavelengths and increase the brightness) as well as increasing their stability and water solubility. The most notable advances include development of encapsulated cyanine dyes with increased stability and water solubility, squaraine rotaxanes with increased stability, long-wavelength-absorbing boron dipyrromethenes, long-wavelength-absorbing porphyrin and hydroporphyrin derivatives, and water-soluble phthalocyanines. Recent advances in luminescence and bioluminescence have made self-illuminating fluorophores available for in vivo applications. Development of new types of hydroporphyrin energy-transfer dyads gives the promise for further advances in in vivo multicolor imaging.

Near-IR emissive chlorin-bacteriochlorin energy-transfer dyads with a common donor and acceptors with tunable emission wavelength

Design, synthesis, and optical properties of a series of novel chlorin-bacteriochlorin energy transfer dyads are described. Each dyad is composed of a common red-absorbing (645-646 nm) chlorin, as an energy donor, and a different near-IR emitting bacteriochlorin, as an energy acceptor. Each bacteriochlorin acceptor is equipped with a different set of auxochromes, so that each of them emits at a different wavelength. Dyads exhibit an efficient energy transfer (≥0.77) even for chlorin-bacteriochlorin pairs with large (up to 122 nm) separation between donor emission and acceptor absorption. Excitation of the chlorin donor results in relatively strong emission of the bacteriochlorin acceptor, with a quantum yield Φf range of 0.155-0.23 in toluene and 0.12-0.185 in DMF. The narrow, tunable emission band of bacteriochlorins enables the selection of a series of three dyads with well-resolved emissions at 732, 760, and 788 nm, and common excitation at 645 nm. Selected dyads have been also converted into bioconjugatable N-succinamide ester derivatives. The optical properties of the described dyads make them promising candidates for development of a family of near-IR fluorophores for simultaneous imaging of multiple targets, where the whole set of fluorophores can be excited with the common wavelength, and fluorescence from each can be independently detected.

Photophysical properties and electronic structure of bacteriochlorin-chalcones with extended near-infrared absorption

Synthetic bacteriochlorins enable systematic tailoring of substituents about the bacteriochlorin chromophore and thereby provide insights concerning the native bacteriochlorophylls of bacterial photosynthesis. Nine free-base bacteriochlorins (eight prepared previously and one prepared here) have been examined that bear diverse substituents at the 13- or 3,13-positions. The substituents include chalcone (3-phenylprop-2-en-1-onyl) derivatives with groups attached to the phenyl moiety, a "reverse chalcone" (3-phenyl-3-oxo-1-enyl), and extended chalcones (5-phenylpenta-2,4-dien-1-onyl, retinylidenonyl). The spectral and photophysical properties (τs, Φf, Φ(ic), Φ(isc), τT, k(f), k(ic), k(isc)) of the bacteriochlorins have been characterized. The bacteriochlorins absorb strongly in the 780-800 nm region and have fluorescence quantum yields (Φf) in the range 0.05-0.11 in toluene and dimethylsulfoxide. Light-induced electron promotions between orbitals with predominantly substituent or macrocycle character or both may give rise to some net macrocycle ↔ substituent charge-transfer character in the lowest and higher singlet excited states as indicated by density functional theory (DFT) and time-dependent DFT calculations. Such calculations indicated significant participation of molecular orbitals beyond those (HOMO - 1 to LUMO + 1) in the Gouterman four-orbital model. Taken together, the studies provide insight into the fundamental properties of bacteriochlorins and illustrate designs for tuning the spectral and photophysical features of these near-infrared-absorbing tetrapyrrole chromophores.

Synthesis of chlorin-sensitized near infrared-emitting lanthanide complexes

Lanthanide (Yb(3+), Nd(3+)) complexes equipped with red-absorbing hydroporphyrin (chlorin) antennae were synthesized and characterized. The syntheses are scalable, highly modular, and enable the introduction of different chlorins functionalized with a single reactive group (COOH or NH(2)). Absorption maxima were dependent on chlorin substitution pattern (monomeso aryl or dimeso aryl) and metalation state (free base or zinc chelate). The complexes benefit from dual chlorin (610-639 nm) and lanthanide (980 or 1065 nm for Yb- or Nd-complexes, respectively) emission in the biologically relevant red and near IR region of the spectrum.

Galactosyl human serum albumin-NMP1 conjugate: a near infrared (NIR)-activatable fluorescence imaging agent to detect peritoneal ovarian cancer metastases

Patient survival depends on the completeness of resection of peritoneal ovarian cancer metastases (POCM), and therefore, it is important to develop methods to enhance detection. Previous probe designs based on activatable galactosyl human serum albumin (hGSA)-fluorophore pairs, which target lectin receptors expressed on POCM, have used only visible range dyes conjugated to hGSA. However, imaging probes emitting fluorescence in the NIR range are advantageous because NIR photons have deeper in vivo tissue penetration and result in lower background autofluorescence than those emitting in the visible range. A NIR-activatable hGSA fluorophore was synthesized using a bacteriochlorin-based dye, NMP1. NMP1 has two unique absorption peaks, one in the green range and the other in the NIR range, but emits at a NIR peak of 780 nm. NMP1, thus, has two different Stokes shifts that have the potential to allow imaging of POCM both at the peritoneal surface and just below it. hGSA was conjugated with 2 NMP1 molecules to create a self-quenching complex (hGSA-NMP1). The activation ratio of hGSA-NMP1 was measured by the fluorescence intensity before and after exposure to 10% SDS. The activation ratio of hGSA-NMP1 was ~100-fold in vitro. Flow cytometry, fluorescence microscopy, and in vivo spectral fluorescence imaging were carried out to compare hGSA-NMP1 with hGSA-IR800 and hGSA-ICG (two always-on control agents with similar emission to NMP1) in terms of comparative fluorescence signal and the ability to detect POCM in mice models. The sensitivity and specificity of hGSA-NMP1 for POCM implant detection were determined by colocalizing NMP1 emission spectra with red fluorescent protein (RFP) expressed constitutively in SHIN3 tumor implants at different depths below the peritoneal surface. In vitro, SHIN3 cells were easily detectable after 3 h of incubation with hGSA-NMP1. In vivo submillimeter POCM foci were clearly detectable with spectral fluorescence imaging using hGSA-NMP1. Among 555 peritoneal lesions, hGSA-NMP, using NIR and green excitation light, respectively, detect 75% of all lesions and 91% of lesions ~0.8 mm or greater in diameter. Few false positives were encountered. Nodules located at a depth below the small bowel surface were only depicted with hGSA-NMP1. We conclude that hGSA-NMP1 is useful in imaging peritoneal ovarian cancer metastases, located both superficially and deep in the abdominal cavity.

Multifunctional bacteriochlorins from selective palladium-coupling reactions

Nonsymmetrical, multifunctional bacteriochlorin derivatives possessing different substituents at the β-pyrrolic positions have been prepared by stepwise, selective functionalization of 3,13-dibromo-5-methoxybacteriochlorin via palladium-coupling reactions. The new derivatives reported here include monovalent bioconjugatable bacteriochlorin, orthogonally protected bacteriochlorin amino acid, and push-pull bacteriochlorins. Taken together, this study provides a route to previously unavailable bacteriochlorin architectures for fundamental studies and diverse applications.

Photophysical properties and electronic structure of stable, tunable synthetic bacteriochlorins: extending the features of native photosynthetic pigments

Bacteriochlorins, which are tetrapyrrole macrocycles with two reduced pyrrole rings, are Nature's near-infrared (NIR) absorbers (700-900 nm). The strong absorption in the NIR region renders bacteriochlorins excellent candidates for a variety of applications including solar light harvesting, flow cytometry, molecular imaging, and photodynamic therapy. Natural bacteriochlorins are inherently unstable due to oxidative conversion to the chlorin (one reduced pyrrole ring) or the porphyrin. The natural pigments are also only modestly amenable to synthetic manipulation, owing to a nearly full complement of substituents on the macrocycle. Recently, a new synthetic methodology has afforded access to stable synthetic bacteriochlorins wherein a wide variety of substituents can be appended to the macrocycle at preselected locations. Herein, the spectroscopic and photophysical properties of 33 synthetic bacteriochlorins are investigated. The NIR absorption bands of the chromophores range from ∼700 to ∼820 nm; the lifetimes of the lowest excited singlet state range from ∼2 to ∼6 ns; the fluorescence quantum yields range from ∼0.05 to ∼0.25; and the yield of the lowest triplet excited state is ∼0.5. The spectroscopic/photophysical studies of the bacteriochlorins are accompanied by density functional theory (DFT) calculations that probe the characteristics of the frontier molecular orbitals. The DFT calculations indicate that the impact of substituents on the spectral properties of the molecules derives primarily from effects on the lowest unoccupied molecular orbital. Collectively, the studies show how the palette of synthetic bacteriochlorins extends the properties of the native photosynthetic pigments (bacteriochlorophylls). The studies have also elucidated design principles for tuning the spectral and photophysical characteristics as required for a wide variety of photochemical applications.

Expanded scope of synthetic bacteriochlorins via improved acid catalysis conditions and diverse dihydrodipyrrin-acetals

Bacteriochlorins are attractive candidates for a wide variety of photochemical studies owing to their strong absorption in the near-infrared spectral region. The prior acid-catalysis conditions [BF(3) x O(Et)(2) in CH(3)CN at room temperature] for self-condensation of a dihydrodipyrrin-acetal (bearing a geminal dimethyl group in the pyrroline ring) typically afforded a mixture of three macrocycles: the expected 5-methoxybacteriochlorin (MeOBC-type), a 5-unsubstituted bacteriochlorin (HBC-type), and a free base B,D-tetradehydrocorrin (TDC-type). Here, a broad survey of >20 acids identified four promising acid catalysis conditions of which TMSOTf/2,6-di-tert-butylpyridine in CH(2)Cl(2) at room temperature was most attractive owing to formation of the 5-methoxybacteriochlorin as the sole macrocycle regardless of the pyrrolic substituents in the dihydrodipyrrin-acetal (electron-withdrawing, electron-donating, or no substituent). Eleven new dihydrodipyrrin-acetals were prepared following standard routes. Application of the new acid catalysis conditions has afforded diverse bacteriochlorins (e.g., bearing alkyl/ester, aryl/ester, diester, and no substituents) in a few days from commercially available starting materials. Consideration of the synthetic steps and yields for formation of the dihydrodipyrrin-acetal and bacteriochlorin underpins evaluation of synthetic plans for early installation of bacteriochlorin substituents via the dihydrodipyrrin-acetal versus late installation via derivatization of beta-bromobacteriochlorins. Treatment of the 5-methoxybacteriochlorins with NBS gave regioselective 15-bromination when no pyrrolic substituents were present or when each pyrrole contained two substituents; on the other hand, the presence of a beta-ethoxycarbonyl group caused loss of regioselectivity. The 15 new bacteriochlorins prepared herein exhibit a long-wavelength absorption band in the range 707-759 nm, providing tunable access to the near-infrared region. Taken together, this study expands the scope of available bacteriochlorins for fundamental studies and diverse applications.

NIR dyes for bioimaging applications

Fluorescent dyes based on small organic molecules that function in the near infrared (NIR) region are of great current interest in chemical biology. They allow for imaging with minimal autofluorescence from biological samples, reduced light scattering, and high tissue penetration. Herein, examples of ongoing NIR fluorophore design strategies as well as their properties and anticipated applications relevant to the bioimaging are presented.

Chlorin-bacteriochlorin energy-transfer dyads as prototypes for near-infrared molecular imaging probes: controlling charge-transfer and fluorescence properties in polar media

The photophysical properties of two energy-transfer dyads that are potential candidates for near-infrared (NIR) imaging probes are investigated as a function of solvent polarity. The dyads (FbC-FbB and ZnC-FbB) contain either a free base (Fb) or zinc (Zn) chlorin (C) as the energy donor and a free base bacteriochlorin (B) as the energy acceptor. The dyads were studied in toluene, chlorobenzene, 1,2-dichlorobenzene, acetone, acetonitrile and dimethylsulfoxide (DMSO). In both dyads, energy transfer from the chlorin to bacteriochlorin occurs with a rate constant of approximately (5-10 ps)(-1) and a yield of >99% in nonpolar and polar media. In toluene, the fluorescence yields (Phif=0.19) and singlet excited-state lifetimes (tau approximately 5.5 ns) are comparable to those of the benchmark bacteriochlorin. The fluorescence yield and excited-state lifetime decrease as the solvent polarity increases, with quenching by intramolecular electron (or hole) transfer being greater for FbC-FbB than for ZnC-FbB in a given solvent. For example, the Phif and tau values for FbC-FbB in acetone are 0.055 and 1.5 ns and in DMSO are 0.019 and 0.28 ns, whereas those for ZnC-FbB in acetone are 0.12 and 4.5 ns and in DMSO are 0.072 and 2.4 ns. The difference in fluorescence properties of the two dyads in a given polar solvent is due to the relative energies of the lowest energy charge-transfer states, as assessed by ground-state redox potentials and supported by molecular-orbital energies derived from density functional theory calculations. Controlling the extent of excited-state quenching in polar media will allow the favorable photophysical properties of the chlorin-bacteriochlorin dyads to be exploited in vivo. These properties include very large Stokes shifts (85 nm for FbC-FbB, 110 nm for ZnC-FbB) between the red-region absorption of the chlorin and the NIR fluorescence of the bacteriochlorin (lambdaf=760 nm), long bacteriochlorin excited-state lifetime (approximately 5.5 ns), and narrow (<or=20 nm) absorption and fluorescence bands. The latter will facilitate selective excitation/detection and multiprobe applications using both intensity- and lifetime-imaging techniques.

Design and synthesis of water-soluble bioconjugatable trans-AB-porphyrins

Three free base porphyrins have been prepared that bear a polar and facially encumbering 2,4,6-tris(carboxymethoxy)phenyl motif at one meso (5-) position. The only other substituent (15-position) comprises phenyl, formyl, or p-aminophenyl. The porphyrins exhibit solubility in water (or aqueous buffer solutions) at pH >/=7 and concentrations >1 mM at room temperature. The concise syntheses, water-solubility, and bioconjugatable handle make these porphyrin constructs suitable for biological applications.