Germination of Lecanicillium fungicola in the mycosphere of Agaricus bisporus

Application of the mushroom volatile 1-octen-3-ol to suppress a morel disease caused by Paecilomyces penicillatus

Morels (Morchella spp.) are of great economic and scientific value. Paecilomyces penicillatus can cause white mold disease (WMD) widely emerging on morel ascocarps and is also a potential factor causing morel fructification failure. 1-octen-3-ol is a mushroom volatile compound with broad-spectrum antimicrobial activities. This study aimed to control the morel disease caused by P. penicillatus through suppressing P. penicillatus in the soil cultivated with Morchella sextelata using 1-octen-3-ol. Safe concentration of 1-octen-3-ol was estimated by comparing its inhibitory effect against P. penicillatus and M. sextelata, respectively, with mycelium-growth experiments on agar plates. The results showed that M. sextelata possesses a higher tolerance to 1-octen-3-ol than P. penicillatus with a 1-octen-3-ol concentration between 0 and 200 µL/L. Based on that, a sandy soil was supplemented with low (50 µL/L) or high concentration (200 µL/L) of 1-octen-3-ol. The effects of 1-octen-3-ol on soil microbial communities, WMD incidence, and morel yield were investigated. Compared to the non-supplemented control group, the incidence of WMD and the proportion of Paecilomyces in the soils of low- and high-concentration treatment groups were significantly decreased, corresponding to a significant increase in morel ascocarp yield. It suggests that 1-octen-3-ol effectively suppressed P. penicillatus in the soil, thereby reducing the severity of WMD and improving the morel yield. The diversity of soil bacterial communities was also altered by 1-octen-3-ol supplement. The proportion of Rhodococcus spp. in the soil was positively correlated with the 1-octen-3-ol concentration and ascocarp yield, suggesting its potential role in improving morel yield. KEY POINTS: • A novel method for morel disease suppression was proposed. • Paecilomyces in soil affects white mold disease and fructification yield of morel. • 1-Octen-3-ol suppresses Paecilomyces and alters bacterial community in soil.

Influence of Agaricus bisporus establishment and fungicidal treatments on casing soil metataxonomy during mushroom cultivation

The cultivation of edible mushroom is an emerging sector with a potential yet to be discovered. Unlike plants, it is a less developed agriculture where many studies are lacking to optimize the cultivation. In this work we have employed high-throughput techniques by next generation sequencing to screen the microbial structure of casing soil employed in mushroom cultivation (Agaricus bisporus) while sequencing V3-V4 of the 16S rRNA gene for bacteria and the ITS2 region of rRNA for. In addition, the microbiota dynamics and evolution (bacterial and fungal communities) in peat-based casing along the process of incubation of A. bisporus have been studied, while comparing the effect of fungicide treatment (chlorothalonil and metrafenone). Statistically significant changes in populations of bacteria and fungi were observed. Microbial composition differed significantly based on incubation day, changing radically from the original communities in the raw material to a specific microbial composition driven by the A. bisporus mycelium growth. Chlorothalonil treatment seems to delay casing colonization by A. bisporus. Proteobacteria and Bacteroidota appeared as the most dominant bacterial phyla. We observed a great change in the structure of the bacteria populations between day 0 and the following days. Fungi populations changed more gradually, with A. bisporus displacing the rest of the species as the cultivation cycle progresses. A better understanding of the microbial communities in the casing will hopefully allow us to increase the biological efficiency of the crop.

Hyphal systems and their effect on the mechanical properties of fungal sporocarps

Little is known about the mechanical and material properties of hyphae, the single constituent material of Agaricomycetes fungi, despite a growing interest in fungus-based materials. In the Agaricomycetes (the mushrooms and allies), there are three types of hyphae that make up sporocarps: generative, skeletal, and ligative. All filamentous Agaricomycetes can be categorized into one of three categories of hyphal systems that compose them: monomitic, dimitic, and trimitic. Monomitic systems have only generative hyphae. Dimitic systems have generative and either skeletal (most common) or ligative. Trimitic systems are composed of all three kinds of hyphae. SEM imaging, compression testing, and theoretical modeling were used to characterize the material and mechanical properties of representative monomitic, dimitic, and trimitic sporocarps. Compression testing revealed an increase in the compression modulus and compressive strength with the addition of more hyphal types (monomitic to dimitic and dimitic to trimitic). The mesostructure of the trimitic sporocarp was tested and modeled, suggesting that the difference in properties between the solid material and the microtubule mesostructure is a result of differences in structure and not material. Theoretical modeling was completed to estimate the mechanical properties of the individual types of hyphae and showed that skeletal hyphae make the largest contribution to mechanical properties of fungal sporocarps. Understanding the contributions of the different types of hyphae may help in the design and application of fungi-based or bioinspired materials. STATEMENT OF SIGNIFICANCE: This research studies the material and mechanical properties of fungal sporocarps and their hyphae, the single constituent material of Agaricomycetes fungi. Though some work has been done on fungal hyphae, this research studies hyphae in context of the three hyphal systems found in Agaricomycetes fungi and estimates the properties of the hyphal filaments, which has not been done previously. This characterization was performed by analyzing the structures and mechanical properties of fungal sporocarps and calculating the theoretical mechanical properties of their hyphae. This data and the resulting conclusions may lead to a better design and implementation process of fungi-based materials in various applications using the properties now known or calculated.

Characterising the proteomic response of mushroom pathogen Lecanicillium fungicola to Bacillus velezensis QST 713 and Kos biocontrol agents

The fungal pathogen Lecanicillium fungicola causes dry bubble disease in Agaricus bisporus cultivation and affected mushrooms significantly reduce the yield and revenue for mushroom growers. Biocontrol agents may represent an alternative and more environmentally friendly treatment option to help control dry bubble on mushroom farms. Serenade ® is a commercially available biocontrol product used for disease treatment in plant crops. In this work, the in vitro response of L. fungicola to the bacterial strain active in Serenade, Bacillus velezensis (QST 713) and a newly isolated B. velezensis strain (Kos) was assessed. B. velezensis (QST713 and Kos) both produced zones of inhibition on plate cultures of L. fungicola, reduced the mycelium growth in liquid cultures and damaged the morphology and structure of L. fungicola hyphae. The proteomic response of the pathogen against these biocontrol strains was also investigated. Proteins involved in growth and translation such as 60S ribosomal protein L21-A (-32-fold) and 40S ribosomal protein S30 (-17-fold) were reduced in abundance in B. velezensis QST 713 treated samples, while proteins involved in a stress response were increased (norsolorinic acid reductase B (47-fold), isocitrate lyase (11-fold) and isovaleryl-CoA dehydrogenase (8-fold). L. fungicola was found to have a similar proteomic response when exposed to B. velezensis (Kos). This work provides information on the response of L. fungicola to B. velezensis (QST 713) and indicates the potential of B. velezensis Kos as a novel biocontrol agent.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10658-022-02482-1.

Casing microbiome dynamics during button mushroom cultivation: implications for dry and wet bubble diseases

The casing material required in mushroom cultivation presents a very rich ecological niche, which is inhabited by a diverse population of bacteria and fungi. In this work three different casing materials, blonde peat, black peat and a 50 : 50 mixture of both, were compared for their capacity to show a natural suppressive response against dry bubble, Lecanicillium fungicola (Preuss) Zare and Gams, and wet bubble, Mycogone perniciosa (Magnus) Delacroix. The highest mushroom production was collected from crops cultivated using the mixed casing and black peat, which were not significantly different in yield. However, artificial infection with mycoparasites resulted in similar yield losses irrespective of the material used, indicating that the casing materials do not confer advantages in disease suppression. The composition of the microbiome of the 50 : 50 casing mixture along the crop cycle and the compost and basidiomes was evaluated through next-generation sequencing (NGS) of the V3-V4 region of the bacterial 16S rRNA gene and the fungal ITS2 region. Once colonized by Agaricus bisporus, the bacterial diversity of the casing microbiome increased and the fungal diversity drastically decreased. From then on, the composition of the casing microbiome remained relatively stable. Analysis of the composition of the bacterial microbiome in basidiomes indicated that it is highly influenced by the casing microbiota. Notably, L. fungicola was consistently detected in uninoculated control samples of compost and casing using NGS, even in asymptomatic crops. This suggests that the naturally established casing microbiota was able to help to suppress disease development when inoculum levels were low, but was not effective in suppressing high pressure from artificially introduced fungal inoculum. Determination of the composition of the casing microbiome paves the way for the development of synthetic casing communities that can be used to investigate the role of specific components of the casing microbiota in mushroom production and disease control.

Microbial ecology of the Agaricus bisporus mushroom cropping process

Agaricus bisporus is the most widely cultivated mushroom species in the world. Cultivation is commenced by inoculating beds of semi-pasteurised composted organic substrate with a pure spawn of A. bisporus. The A. bisporus mycelium subsequently colonises the composted substrate by degrading the organic material to release nutrients. A layer of peat, often called "casing soil", is laid upon the surface of the composted substrate to induce the development of the mushroom crop and maintain compost environmental conditions. Extensive research has been conducted investigating the biochemistry and genetics of A. bisporus throughout the cultivation process; however, little is currently known about the wider microbial ecology that co-inhabits the composted substrate and casing layers. The compost and casing microbial communities are known to play important roles in the mushroom production process. Microbial species present in the compost and casing are known for (1) being an important source of nitrogen for the A. bisporus mycelium, (2) releasing sugar residues through the degradation of the wheat straw in the composted substrate, (3) playing a critical role in inducing development of the A. bisporus fruiting bodies and (4) acting as pathogens by parasitising the mushroom mycelium/crop. Despite a long history of research into the mushroom cropping process, an extensive review of the microbial communities present in the compost and casing has not as of yet been undertaken. The aim of this review is to provide a comprehensive summary of the literature investigating the compost and casing microbial communities throughout cultivation of the A. bisporus mushroom crop.

Diversity and dynamics of the DNA- and cDNA-derived compost fungal communities throughout the commercial cultivation process for Agaricus bisporus

Commercial cultivation of the button mushroom Agaricus bisporus is performed through the inoculation of a semipasteurized composted material. Pasteurization of the compost material prior to inoculation results in a substrate with a fungal community that becomes dominated by A. bisporus. However, little is known about the composition and activity in the wider fungal community beyond the presence of A. bisporus in compost throughout the mushroom cropping process. In this study, the fungal cropping compost community was characterized by sequencing nuc rDNA ITS1-5.8S-ITS2 amplified from extractable DNA and RNA. The fungal community generated from DNA extracts identified a diverse community containing 211 unique species, although only 51 were identified from cDNA. Agaricus bisporus was found to dominate in the DNA-derived fungal community for the duration of the cropping process. However, analysis of cDNA extracts found A. bisporus to dominate only up to the first crop flush, after which activity decreased sharply and a much broader fungal community became active. This study has highlighted the diverse fungal community that is present in mushroom compost during cropping.

Transcriptomic analysis of the interactions between Agaricus bisporus and Lecanicillium fungicola

Agaricus bisporus is susceptible to a number of diseases, particularly those caused by fungi, with Lecanicillium fungicola being the most serious. Control of this disease is important for the security of crop production, however given the lack of knowledge about fungal-fungal interactions, such disease control is rather limited. Exploiting the recently released genome sequence of A. bisporus, here we report studies simultaneously investigating both the host and the pathogen, focussing on transcriptional changes associated with the cap spotting lesions typically seen in this interaction. Forward-suppressive subtractive hybridisation (SSH) analysis identified 68 A. bisporus unigenes induced during infection. Chitin deacetylase showed the strongest response, with almost 1000-fold up-regulation during infection, so was targeted for down-regulation by silencing to see if it was involved in defence against L. fungicola. Transgenic lines were made expressing hairpin RNAi constructs, however no changes in susceptibility to L. fungicola were observed. Amongst the other up-regulated genes there were none with readily apparent roles in resisting infection in this susceptible interaction. Reverse-SSH identified 72 unigenes from A. bisporus showing reduced expression, including two tyrosinases, several genes involved in nitrogen metabolism and a hydrophobin. The forward-SSH analysis of infected mushrooms also yielded 64 unigenes which were not of A. bisporus origin and thus derived from L. fungicola. An EST analysis of infection-mimicking conditions generated an additional 623 unigenes from L. fungicola including several oxidoreductases, cell wall degrading enzymes, ABC and MFS transporter proteins and various other genes believed to play roles in other pathosystems. Together, this analysis shows how both the pathogen and the host modify their gene expression during an infection-interaction, shedding some light on the disease process, although we note that some 40% of unigenes from both organisms encode hypothetical proteins with no ascribed function which highlights how much there is still to discover about this interaction.

Two putative-aquaporin genes are differentially expressed during arbuscular mycorrhizal symbiosis in Lotus japonicus

BACKGROUND

Arbuscular mycorrhizas (AM) are widespread symbioses that provide great advantages to the plant, improving its nutritional status and allowing the fungus to complete its life cycle. Nevertheless, molecular mechanisms that lead to the development of AM symbiosis are not yet fully deciphered. Here, we have focused on two putative aquaporin genes, LjNIP1 and LjXIP1, which resulted to be upregulated in a transcriptomic analysis performed on mycorrhizal roots of Lotus japonicus.

RESULTS

A phylogenetic analysis has shown that the two putative aquaporins belong to different functional families: NIPs and XIPs. Transcriptomic experiments have shown the independence of their expression from their nutritional status but also a close correlation with mycorrhizal and rhizobial interaction. Further transcript quantification has revealed a good correlation between the expression of one of them, LjNIP1, and LjPT4, the phosphate transporter which is considered a marker gene for mycorrhizal functionality. By using laser microdissection, we have demonstrated that one of the two genes, LjNIP1, is expressed exclusively in arbuscule-containing cells. LjNIP1, in agreement with its putative role as an aquaporin, is capable of transferring water when expressed in yeast protoplasts. Confocal analysis have demonstrated that eGFP-LjNIP1, under its endogenous promoter, accumulates in the inner membrane system of arbusculated cells.

CONCLUSIONS

Overall, the results have shown different functionality and expression specificity of two mycorrhiza-inducible aquaporins in L. japonicus. One of them, LjNIP1 can be considered a novel molecular marker of mycorrhizal status at different developmental stages of the arbuscule. At the same time, LjXIP1 results to be the first XIP family aquaporin to be transcriptionally regulated during symbiosis.