Whitening toothpastes: effects on tooth stain and enamel

Stain removal, abrasion and anticaries properties of a novel low abrasion dentifrice containing micro-fibrillated cellulose: in vitro assessments

OBJECTIVES

This laboratory study assessed the performance of a novel fluoride dentifrice containing micro-fibrillated cellulose (MFC) and entrapped silica.

METHODS

Removal of extrinsic stains was assessed using the pellicle cleaning ratio (PCR) method, and radioactive dentin abrasivity (RDA) was measured, to calculate a cleaning efficiency index (CEI). Fluoride efficacy was evaluated using widely used remineralization and fluoride uptake methods. The test product (Protegera™) was compared to common dentifrices (Crest - Cavity Protection™ and ProHealth™, Sensodyne Pronamel™, Arm & Hammer™ Advanced Whitening, Crest ProHealth™, and Colgate Optic White™).

RESULTS

The PCR for the MFC dentifrice (141) was comparable to three known marketed stain-removing dentifrices (Arm & Hammer™ Advanced Whitening, Crest ProHealth™, and Colgate Optic White™) but it had a significantly lower RDA (88 ± 6) than 5 other products. This gave it the highest CEI of the tested products (2.0). In a 10-day pH cycling study, the fluoride efficacy of the MFC product was comparable to Sensodyne Pronamel and Crest Cavity Protection. The MFC dentifrice was superior for promoting fluoride uptake into incipient enamel lesions compared to the USP reference dentifrice.

CONCLUSION

The MFC dentifrice has low abrasion, but despite this, it is highly effective in removing stained pellicle. It also is an efficacious fluoride source when compared to relevant commercially available fluoride dentifrices with high dentin abrasivity.

CLINICAL SIGNIFICANCE

The addition of micro-fibrillated cellulose to a fluoride dentifrice gives a low abrasive product that can effectively remove external stains, and serve as an effective fluoride source. This combination of benefits seems well suited to enamel protection and caries prevention.

Evaluation of the effects of whitening toothpaste containing nanohydroxyapatite on surface roughness and color change in restorative materials

Background

The effects of whitening toothpastes containing nanohydroxyapatite on the surfaces of restorative materials are not well known. This study evaluated the changes in surface roughness and color of coffee-stained restorative materials after brushing with nanohydroxyapatite and other whitening toothpastes.

Methods

Disc-shaped specimens were formed using microhybrid, nanohybrid, and supra-nano-filled composite (n = 30) and stained with a coffee solution. A brushing simulation was applied with toothpastes containing nanohydroxyapatite (Dentiste Plus White), perlite (Signal White System) and hydrogen peroxide (Colgate Optic White) for 7, 15, and 30 days. Color and surface roughness measurements were taken before and after brushing. Color change (∆E₀₀) was calculated using the CIEDE2000 system.

Results

Supra-nano-filled composite-Dentiste Plus White, supra-nano-filled composite-Colgate Optic White, and nanohybrid composite-Signal White System were the groups with the greatest color change observed on the 7th, 15th, and 30th days, respectively. The smallest color change was seen in the microhybrid composite-Signal White System, microhybrid composite-Dentiste Plus White, and nanohybrid composite-Dentiste Plus White groups on the 7th, 15th, and 30th days, respectively. No significant surface roughness changes were observed in the nanohybrid composite-Dentiste Plus White, supra-nano-filled composite-Colgate Optic White, supra-nano-filled composite-Dentiste Plus White, or supra-nano-filled composite-Signal White System groups.

Conclusions

Whitening toothpaste containing nanohydroxyapatite provided a high degree of color change in the short term and did not create significant surface roughness in nanohybrid or supra-nano-filled composites.

Effects of different toothpastes on the color and whiteness of stained anterior composite resin

PURPOSE

To evaluate changes in the color of an anterior nanohybrid composite resin and differences in its whitening index after 30 days of brushing with six brands of whitening toothpaste in vitro to simulate the situation in individuals with high coffee consumption.

METHODS

Eighty-four disk-shaped resin specimens were prepared (shade A2). For initial staining, the samples were immersed in coffee solution for 14 days and then divided into eight groups for treatment with various toothpastes. Color was assessed at the baseline, after initial staining, and on days 7, 14, and 30 of the staining-and-brushing cycle. Color stability was evaluated based on the CIEDE2000 color difference (ΔE00), and differences in whiteness were determined using the whitening index for dentistry (WID).

RESULTS

The highest ΔE00 and ΔWID values were obtained with Colgate Herbal, followed by Opalescence Whitening and Crest Baking Soda and Peroxide, whereas the lowest values were obtained with distilled water, followed by Yotuel Pharma B5, on day 30 of the staining-and-brushing cycle.

CONCLUSION

In terms of improving the color and whiteness of coffee-stained anterior nanohybrid composite resin, Colgate Herbal, Opalescence Whitening, and Crest Baking Soda and Peroxide yielded promising results after 30 days of continuous use.

Influence of the Amount of Toothpaste on Cleaning Efficacy: An In Vitro Study

OBJECTIVES

 The aim of this in vitro study was to test the influence of the amount of toothpaste on enamel cleaning efficacy.

MATERIALS AND METHODS

 The hydrated silica-based test toothpaste (radioactive dentin abrasion: 60.19 ± 1.35) contained all ingredients of a regular fluoride toothpaste. The cleaning efficacy of four different toothpaste amounts (1.00 g, 0.50 g [both "full length of brush"], 0.25 g ["pea-size"], and 0.125 g ["grain of rice-size"]) diluted in 1.00 mL water were each tested for different brushing times (10, 30, 60, 120, 180, and 300 seconds) using a standardized staining model on human molars with a brushing machine. Photographic documentation and colorimetric measurements were conducted, respectively, initially, after staining and after each brushing step. Colorimetric measurements were used to calculate the stain removal (in %).

STATISTICAL ANALYSIS

 Results were analyzed by one-way analysis of variance with post hoc Tukey test and Levene's test for analysis of homogeneity of variance. The level of significance α was set at ≤ 0.05.

RESULTS

 The cleaning efficacy decreased significantly when using smaller toothpaste amounts. Stain removal after 120 seconds brushing time was: 77.4 ± 5.0% (1.00 g toothpaste), 75.7 ± 3.4% (0.50 g toothpaste), 54.1 ± 6.7% (0.25 g toothpaste), and 48.2 ± 7.1% (0.125 g toothpaste), respectively.

CONCLUSION

 In this in vitro study the cleaning efficacy of a medium-abrasive, hydrated silica-based toothpaste was analyzed. Note that 1.00 g toothpaste showed for all brushing times a significantly higher cleaning efficacy than 0.25 g toothpaste and 0.125 g toothpaste.

[The color analysis of nanocomposite material before and after exposure to whitening toothpastes using a portable spectrophotometer]

PURPOSE

To determine the effect of whitening toothpastes on the color of a nanocomposite material using a spectrophotometer.

MATERIAL AND METHODS

The study involved 50 samples from nanocomposite restoration material which were exposed under laboratory conditions to brushing with one of 4 types of toothpastes (control with no bleaching agents, peroxide paste with carbamide, abrasive and enzyme-based pastes). Using the parameters a, b and L obtained by spectrophotometry, delta E (ΔE) value was calculated. To determine the maximum and minimum A posteriori comparisons by the Scheffe method were used to influence the delta E parameter after exposure to the pastes. Oxygen-containing paste (OZPP) had a maximum effect on the increase of the ΔE parameter, ΔE=1.03 comparing to ΔE=0.20 in control toothpaste. The isolated effect of a toothbrush resulted in a large change in the parameter ΔE, compared to the effect of a controls. However, the ΔE does not indicate the clarification of the material, but only a change in color relative to the initial measurement. As a result of spectrophotometry and statistical data processing, it was found that all pastes had a sufficient effect on the color change for the device to determine, but this change was not noticeable to the human eye.

Tooth color and whitening - digital technologies

OBJECTIVES

To review the key concepts of color in the dental domain with specific reference to the use of digital technology to measure color and color appearance.

MATERIALS AND METHODS

The literature on color assessment in dentistry is considered and methods for assessing whiteness, yellowness and color appearance are collated and described.

RESULTS AND CONCLUSION

A variety of methods for assessing color have been shown to exist and be viable including digital imaging. Equations to predict whiteness are identified; there is evidence that they are effective but further evaluation may be needed.

Impact of toothbrushing frequency and toothpaste fluoride/abrasivity levels on incipient artificial caries lesion abrasion

OBJECTIVES

To investigate the interplay among brushing frequency, dentifrice slurry abrasivity, and fluoride content on the surface loss (SL) of incipient enamel caries-like lesions.

METHODS

Lesions were created in 96 bovine enamel specimens (5 × 5 mm) using methylcellulose acid gel. Specimens were randomly allocated to 12 groups (n = 8), resulting from the association of three experimental factors: (1) slurry abrasive level [low: REA = 4/RDA = 69 and high: REA = 7/RDA = 208], (2) fluoride concentration [275 and 1250 ppm F as NaF], and (3) brushing frequency [1, 2 and 3× daily]. Specimens were kept in artificial saliva in between brushings and overnight. SL was determined by optical profilometry after lesion creation, 1, 3, 5, and 7 days. Data was analyzed with repeated measures ANOVA and Tukey's tests (α = 0.05).

RESULTS

High abrasive slurry caused significantly more SL than low with 275 ppm (p < 0.001) but not with 1250 ppm fluoride (p = 0.34). Fluoride at 275 ppm had significantly more SL than 1250 ppm with high abrasive slurry after 7 days (p = 0.008). Brushing 1×/day had significantly less SL than 3×/day after 7 days with high abrasive slurry (p = 0.016), especially in the 275 ppm fluoride groups.

CONCLUSIONS

Higher fluoride concentration increased protection against the deleterious effect of high abrasive slurry. SL was higher if brushing was performed more than twice daily especially in low fluoride groups.

CLINICAL SIGNIFICANCE

Highly abrasive toothpaste formulations might cause more surface wear to incipient caries lesions, especially at higher brushing frequencies. Increasing the fluoride content may be beneficial at these circumstances.

Tooth colour and whiteness: A review

OBJECTIVES

To review current knowledge concerning the application of colour science on tooth colour and whiteness description, measurement, distribution and its psychological impact.

DATA SOURCES

"Scopus" databases were searched electronically with the principal keywords tooth, teeth, colour, white, whiteness. Language was restricted to English and original studies and reviews were included. Conference papers and abstracts were excluded.

CONCLUSIONS

The appearance and colour of teeth are a common concern for patients across many populations and are associated with an increased desire for treatments that improve dental aesthetics, including tooth whitening. The application of colour science in dentistry has allowed the precise description of tooth colour and whiteness. Coupled with the advances in instrumental tooth colour measurement, such as spectrophotometers, colorimeters, spectroradiometers and digital imaging systems, these parameters are quantifiable in a reproducible and robust manner. These principles have been applied to the tooth colour distribution in many study populations, indicating, in general, differences in tooth colour for subject age and gender, but not for ethnicity. Psychophysical studies on tooth colour and whiteness via third party assessment of images indicate that whitened teeth lead to judgements that are more positive on personality traits such as social competence and appeal, intellectual ability and relationship satisfaction.

Clinical evaluation of the whitening effect of over-the-counter dentifrices on vital teeth

This randomized clinical trial evaluated the whitening potential of commercially available toothpastes. Sixty patients were selected and randomly divided into 4 groups (n=15), according to the dentifrice used: GI (control) - Colgate Total 12, GII - Close-up White Now, GIII: Oral-B 3D White, GIV: Colgate Luminous White. Three daily brushings were performed for 2 to 3 min each, during a period of 15 days. Patients had the color of their teeth evaluated before and after the treatment by means of a spectrophotometer (Vita EasyShade - CIE L*a*b*). Data obtained from L values were analyzed by one-way ANOVA and t test. ∆E was also evaluated to calculate color alteration, by NBS criteria. Mean (standard deviation) of initial values were GI: 82.9 (4.9); GII: 83.9 (5.8); GIII: 83.9 (7.2); GIV: 86.4 (3.4) and final values were GI: 84.1 (6.3); GII: 84.6 (6.1); GIII: 84.2 (7.1); GIV: 88.2 (2.8). In conclusion, the dentifrices showed no lightening action on vital teeth, except for Colgate Luminous White; but according to NBS criteria, there was no noticeable visible change to the patients in any group.

Comparison of effectiveness of abrasive and enzymatic action of whitening toothpastes in removal of extrinsic stains - a clinical trial

OBJECTIVE

To compare the effectiveness of abrasive component (perlite/calcium carbonate) and enzymatic component (papain and bromelain) of whitening toothpaste in removal of extrinsic stains.

METHODS

This study is a randomized, triple blind and parallel group study in which 90 subjects aged 18-40 years were included. At baseline, stains scores were assessed by Macpherson's modification of Lobene Stain Index and subjects were randomly assigned to two groups with 45 subjects in each. Group 1 used whitening toothpaste with enzymatic action and group 2 with abrasive action. After 1 month, stain scores were assessed for the effectiveness of the two toothpastes and 2 months later to check the stain prevention efficacy. Wilcoxson's test was used to compare between baseline 1 and 2 months stain scores, and Mann-Witney U-test was applied for intragroup comparison.

RESULTS

The mean baseline total stain score for the subjects allocated to the enzymatic toothpaste was 37.24 ± 2.11 which reduced to 30.77 ± 2.48 in 1 month, and for the abrasive paste, total stain reduced from 35.08 ± 2.96 to 32.89 ± 1.95. The reductions in total stain scores with both the pastes were significant compared with baseline stain scores (at 1 month Group 1, P = 0.0233 and Group 2, P = 0.0324; at 2 months, Group 1 P = 0.0356). Both the toothpastes proved to be equally good in removal of extrinsic stains; however, the enzymatic paste showed better results as compared to abrasive toothpaste.

CONCLUSION

Whitening toothpaste with abrasive action and enzymatic action are equally effective in removal of extrinsic stains; however, whitening toothpaste with abrasive action needs to be used with caution.

Dentifrice fluoride and abrasivity interplay on artificial caries lesions

Incipient caries lesions on smooth surfaces may be subjected to toothbrushing, potentially leading to remineralization and/or abrasive wear. The interplay of dentifrice abrasivity and fluoride on this process is largely unknown and was investigated on three artificially created lesions with different mineral content/distribution. 120 bovine enamel specimens were randomly allocated to 12 groups (n = 10), resulting from the association of (1) lesion type [methylcellulose acid gel (MeC); carboxymethylcellulose solution (CMC); hydroxyethylcellulose gel (HEC)], (2) slurry abrasive level [low (REA 4/ RDA 69); high (REA 7/RDA 208)], and (3) fluoride concentration [0/275 ppm (14.5 mM) F as NaF]. After lesion creation, specimens were brushed in an automated brushing machine with the test slurries (50 strokes 2×/day). Specimens were kept in artificial saliva in between brushings and overnight. Enamel surface loss (SL) was determined by optical profilometry after lesion creation, 1, 3 and 5 days. Two enamel sections (from baseline and post-brushing areas) were obtained and analyzed microradiographically. Data were analyzed by analysis of variance and Tukey's tests (α = 5%). Brushing with high-abrasive slurry caused more SL than brushing with low-abrasive slurry. For MeC and CMC lesions, fluoride had a protective effect on SL from day 3 on. Furthermore, for MeC and CMC, there was a significant mineral gain in the remaining lesions except when brushed with high-abrasive slurries and 0 ppm F. For HEC, a significant mineral gain took place when low-abrasive slurry was used with fluoride. The tested lesions responded differently to the toothbrushing procedures. Both slurry fluoride content and abrasivity directly impacted SL and mineral gain of enamel caries lesions.

Effect of whitening and desensitizing dentifrices on composite surfaces treated with surface sealants

OBJECTIVE

This study evaluated the effect of different dentifrices on the microhardness and surface roughness of composite surfaces covered by surface sealants.

METHODS

Samples of Filtek P60 were made and divided into groups, in accordance with surface treatments: G1 - Fortify; G2 - Fortify Plus; G3 - control (none). For Knoop microhardness evaluation, the specimens were placed in a microdurometer, under a load of 50 g for 15 sec. The analyses of surface roughness were carried out individually in a profilometer. The specimens were submitted to toothbrushing using dentifrices: Colgate Maximum Protection Anti-caries, Colgate Whitening or Sensodyne, diluted in distilled water (1:3) for 30 000 cycles.

RESULTS

The results showed that the control group (G3) presented the highest microhardness values. The control group presented, before toothbrushing, the lowest surface roughness values, and after toothbrushing there were no differences among the experimental groups.

CONCLUSION

The maintenance of the lowest values of microhardness demonstrated the effectiveness of these sealant materials to support the abrasive wear.

Whitening toothpastes: a review of the literature

OBJECTIVES

To review and summarise the whitening agents contained within tooth whitening toothpaste formulations, their mode of action in tooth whitening, and the in vitro and clinical methods used to evaluate and demonstrate their efficacy.

METHODS

Original scientific full papers or reviews listed in ISI Web of Science and Medline were included in this review using the search terms white*, toothpaste and dentifrice.

CONCLUSIONS

Due to the reported consumer and patient dissatisfaction with their perceived tooth color, toothpaste manufacturers have responded by developing a vast array of contemporary whitening toothpastes. One of the key functional ingredients in whitening toothpastes is the abrasive system. In general, these have been designed to give effective removal of extrinsic stains and help prevent tooth stains from reforming without undue abrasivity towards the dental hard tissues. Whitening toothpastes may contain additional agents that augment the abrasive cleaning by aiding the removal and/or prevention of extrinsic stains, for examples, peroxide, enzymes, citrate, pyrophosphate and hexametaphosphate, or optical agents such as blue covarine which can improve tooth whiteness following tooth brushing. In vitro methods used to evaluate tooth whitening efficacy typically determine the ability of a toothpaste formulation to remove/prevent model extrinsic stains on substrates such as enamel or hydroxyapatite or changes in the intrinsic color of tooth specimens. Clinical protocols for evaluating the efficacy of whitening toothpastes typically determine either stain removal or prevention, where changes in natural stain or chlorhexidine/tea induced stain are measured typically over 2-6 weeks. In some clinical studies the overall tooth color change was measured using techniques such as Vita shade guides, colorimeters and image analysis of digital photographs of teeth.

The evaluation of a novel method comparing quantitative light-induced fluorescence (QLF) with spectrophotometry to assess staining and bleaching of teeth

This study reports the development and evaluation of a novel method using quantitative light-induced fluorescence (QLF), which enables its use for quantifying and assessing whole tooth surface staining and tooth whitening. The method was compared with a spectrophotometer to assess reliability. Two experimental phases, intrinsic stain formation and tooth whitening, were conducted in vitro on 16 extracted bovine teeth. Intrinsic stains were developed via access through lingual surfaces and root canals of these teeth using tea solution (2 g/100 ml, Marks and Spencer Extra Strong Tea, Marks and Spencer, London, UK) for 6 days. Stains were removed using 33% hydrogen peroxide (VWR Prolab, Leicestershire, UK) in cycles over 150 min. Stain development/whitening was monitored with QLF (Inspektor Research systems, Amsterdam, Netherlands) and spectrophotometry (Easy shade, Vita Zahnfabrik, Bad Säckingen, Germany). Parameters Delta F for QLF and Delta E for the spectrophotometer were obtained. The progression of stain intensity and removal observed by the methods were tested for correlation using Pearson's correlation coefficient. Intra-examiner reliability for each method was tested. QLF showed a high correlation with spectrophotometry for detecting and monitoring intrinsic tooth stain progression (Pearson coefficient r was -0.987 with correlation significant p < 0.0001). For stain removal, the Pearson coefficient (r) between both methods was -0.906 with no significance p = 0.094. The use of an external reference material in combination with the inner patch QLF analysis technique had the ability to detect and measure whole tooth surface staining and its removal longitudinally. The reliability of the method shows a potential clinical application.

A review of tooth colour and whiteness

OBJECTIVES

To review current knowledge on the definition of tooth whiteness and its application within dentistry, together with the measured range of tooth colours.

METHODS

'Medline' and 'ISI Web of Sciences' databases were searched electronically with key words tooth, teeth, colour, colour, white and whiteness.

CONCLUSIONS

The application of colour science within dentistry has permitted the measurement of tooth colour in an objective way, with the most common colour space in current use being the CIELAB (Commission Internationale de l'Eclairage). Indeed, many investigators from a range of different countries have reported L*, a* and b* values for teeth measured in vivo using instrumental techniques such as spectrophotometers, colorimeters and image analysis of digital images. In general, these studies show a large range in L*, a* and b* values, but consistently show that there is a significant contribution of b* value or yellowness in natural tooth colour. Further developments in colour science have lead to the description of tooth whiteness and changes in tooth whiteness based on whiteness indices, with the most relevant and applicable being the WIO whiteness index, a modified version of the CIE whiteness index.

In vitro cleaning, abrasion and fluoride efficacy of a new silica based whitening toothpaste containing blue covarine

OBJECTIVES

To investigate the stain removal ability, abrasivity towards enamel and dentine, and fluoride efficacy of a new silica based blue covarine whitening toothpaste in vitro.

METHODS

Stain removal was assessed by brushing artificially stained bovine specimens with slurries of either the new toothpaste or one of two whitening products or a non-whitening silica product. Toothpaste abrasivity was assessed by brushing enamel/dentine specimens with slurries of either the new toothpaste, a whitening toothpaste or a non-whitening toothpaste and measuring the wear via a combination of changes in geometry of Knoop indents and surface profilometry. Fluoride efficacy was assessed using remineralisation, demineralisation and fluoride-uptake methods.

RESULTS

The in vitro cleaning study showed that the silica based blue covarine whitening toothpaste removed significantly (p < 0.05) more stain than the non-whitening toothpaste and was as effective as the two marketed silica based whitening toothpastes. This enhanced tooth whitening benefit did not give rise to a concomitant statistically significant increase in the level of wear to enamel and dentine compared to the non-whitening silica based toothpaste. The fluoride efficacy was superior to a non-fluoridated control and was as effective as a clinically tested formulation containing the same fluoride source.

CONCLUSIONS

The studies show that the new whitening toothpaste is effective in extrinsic stain removal, does not have an undue degree of abrasivity to enamel or dentine compared to other relevant commercially available products, and is an efficacious source of fluoride.

The measurement of enamel wear by four toothpastes

OBJECTIVES

To determine the enamel abrasivity of three whitening toothpastes and a silica toothpaste and to measure the brushing forces used.

METHODS

Polished human enamel blocks were indented with a Knoop diamond and attached to dentures of adult volunteers. The blocks were brushed ex vivo, twice per day with either a whitening toothpaste containing Perlite (White System), a commercial whitening toothpaste (A and B) or a silica toothpaste. After four and twelve-weeks, one block per subject was removed and the Knoop indent remeasured. From the changes in the indent length, the amount of enamel wear was calculated.

RESULTS

The mean enamel wear (sd) for White System, silica toothpaste, whitening toothpaste A and B after four-weeks was 0.14 (0.15), 0.09 (0.16), 0.14 (0.12) and 0.89 (0.93) and after twelve-weeks was 0.24 (0.21), 0.37 (0.73), 0.36 (0.52) and 1.04 (0.98) microm respectively. After four-weeks, the differences in enamel wear between whitening toothpaste B and all other toothpastes were of statistical significance (p < 0.003), but not after twelve-weeks. The mean ex vivo normal brushing force (sd) was 2.67 (1.33) N.

CONCLUSIONS

All three whitening toothpastes did not give significantly more enamel wear than a silica toothpaste after twelve-weeks in situ with ex vivo brushing.

Separate Whitening Effects on Enamel and Dentin After Fourteen Days

The purpose of this study was to investigate the mechanism of action of a bleaching agent, as it relates to enamel and dentin. Twenty-six extracted human molar teeth were sectioned at the cemento-enamel junction and were randomly assigned to two groups. L*a*b* readings were taken with a spectrophotometer: on buccal surfaces of the crown, at enamel and dentin. The teeth were exposed to carbamide peroxide or placebo gel and L*a*b* scores were again recorded to determine color changes. Treatments were compared using ancova test with baseline color as the covariate. Relative to placebo, buccal surfaces exhibited the greatest Deltab* and DeltaL* color change. On buccal surfaces, the adjusted mean (SE) treatment differences were -7.8 (1.00) for Deltab* and 5.7 (0.97) for DeltaL, with groups differing significantly (p < 0.0001). On enamel surfaces, treatment differences were -3.6 (0.61) for Deltab* and 4.6 (0.80) for DeltaL* (p < 0.0001). Dentin exhibited the least color improvement. Adjusted mean (SE) treatment differences were -1.9 (0.87) for Deltab* and 2.4 (1.10) for DeltaL*, with groups differing significantly (p < 0.02) on dentin color change. The majority of color change seen on the buccal surface of tooth crowns exposed to carbamide peroxide 15% was because of the color change in enamel. As compared to enamel, dentin was less affected after 14 days.

Review of the extrinsic stain removal and enamel/dentine abrasion by a calcium carbonate and perlite containing whitening toothpaste

There has been an increase in the demand from consumers and patients for products that whiten teeth. To meet this demand, a whitening toothpaste containing calcium carbonate and perlite as the abrasive system and an efficacious fluoride source has recently been launched. The aim of the current paper is to review the toothpaste's stain removal efficacy and its effects on enamel and dentine wear. It has been shown to be effective at removing model extrinsic stain in vitro. Further, it has been shown to be more effective in removing naturally occurring extrinsic tooth stain than a silica non-whitening control toothpaste after two weeks of twice daily brushing in a parallel group, double-blind clinical study using 152 adult volunteers. In addition, the enhanced whitening effect did not give a clinically relevant level of wear to enamel or a significant increase in dentine wear compared to marketed non-whitening toothpaste formulations, as shown by using an in situ type model with ex vivo brushing.

Wear of dentine in vitro by toothpaste abrasives and detergents alone and combined

AIM

To measure in vitro the abrasion of dentine by toothpaste detergents and abrasives alone and combined.

MATERIALS AND METHODS

Detergents used were tego betain, sodium lauryl sulphate (SLS), adinol and pluronic diluted to 1% w/v. Abrasives were three artificial silicas, tixosil 73 and 123 and Zeodent 113, and calcium carbonate used at 2.5% w/v. Flat human dentine specimens were brushed with aqueous detergent solutions or abrasive slurries, detergent abrasive slurries and water for 20,000 brush strokes. Dentine loss was measured by non-contacting profilometry at 10,000 and 20,000 strokes. Silica particle size distribution was measured by laser deflection.

RESULTS

Loss of dentine occurred with all detergents, abrasives and detergent abrasion combinations, but was not linear with number of brush strokes. Water appeared to remove the smear layer only, but all detergents exceeded the predicted smear layer thickness. The silica abrasives differed in abrasion properties despite similar particle size distribution. Different detergents modulated the abrasives actions in mainly positive or mainly negative directions.

CONCLUSIONS

Detergents appear able to attack the dentine surface to produce wear. Abrasives vary considerably in wear produced under similar conditions. Detergents modulate the effect of abrasives in a way that may reflect the rheological properties of the mixture.

Tooth brushing, tooth wear and dentine hypersensitivity — are they associated?

Evidence suggests that patients suffer the painful symptoms of dentine hypersensitivity when dentine is exposed and the dentinal tubule system is opened to the oral cavity to allow stimuli to trigger a neural response in the pulp via a hydrodynamic mechanism. The processes needed to localise lesions of dentine hypersensitivity include loss of enamel and/or gingival recession. Whilst tooth brushing with or without toothpaste appears to cause minimal wear to enamel (in the absence of acids), circumstantial evidence implicates tooth brushing with gingival recession and exposure of dentine. Other tooth wear processes notably attrition and acid erosion cause loss of enamel and can expose dentine. Therefore sensitivity may result. How lesions of dentine hypersensitivity are initiated is a matter of conjecture and based on extrapolating data from studies, mainly in vitro, to affect in vivo. Again this circumstantial type of evidence suggests that abrasion by some toothpastes and erosion by dietary acid could open the tubule system. Little is known about the actual effect of desensitising toothpastes on lesions of dentine hypersensitivity even though they are formulated to either occlude dentinal tubules or block the neural response in the pulp. Clinical studies have produced contradictory findings for the efficacy of products and there have been extremely few evidence based reviews. In conclusion, available evidence supports a probable link of tooth brushing, with or without toothpaste and an acidic diet to both tooth wear and dentine hypersensitivity, and suggests also that dentine hypersensitivity is a tooth wear phenomenon. Although there is a need for more direct clinical and scientific evidence for these associations, it is recommended that they be taken into consideration when planning management strategies for the dentine hypersensitivity sufferer.

The measurement in vitro of enamel and dentine wear by toothpastes of different abrasivity

OBJECTIVES

To investigate the in vitro enamel and dentine wear by toothpastes with a range of Relative Dentine Abrasivity (RDA) and Relative Enamel Abrasivity (REA) values.

METHODS

Human enamel/dentine (approximately 50:50) blocks (approximately 4 x 4 mm) were polished and the enamel indented with four Knoop indents. The step across the enamel-dentine junction was measured by interference microscopy. Specimens were brushed in vitro with toothpastes with a range of RDA/REA values using a flat trim toothbrush mounted in a Wira brushing machine for 360 s and a load of 375 g. After brushing the Knoop indent length and the enamel-dentine step were remeasured and the amount of wear to the enamel and dentine was calculated.

RESULTS

The mean enamel wear ranged from 0.05 to 0.40 microns, with the highest wear for the highest REA product. The mean dentine wear for all toothpaste products tested was positively correlated with RDA value (R2 = 0.897). The correlation was further improved if median wear values were used (R2 = 0.930).

CONCLUSIONS

This study has demonstrated a rapid technique for the simultaneous investigation of the abrasive wear of toothpaste on enamel and dentine. There was a good correlation between median dentine wear and RDA values.

The measurement of enamel and dentine abrasion by tooth whitening products using an in situ model

OBJECTIVES

To determine the enamel and dentine wear of two whitening toothpastes using an in situ model with ex vivo brushing.

METHODS

Human enamel/dentine (approximately 50:50) blocks (approximately 4 x 4mm) were placed in the upper buccal aspects of full or partial dentures of a group of 25 subjects. Subjects brushed the specimens ex vivo with either a calcium carbonate/perlite or silica containing whitening toothpaste under exaggerated conditions as compared to normal for 30 s, twice per day. Specimens were removed after 4, 8 and 12 weeks and the wear to the enamel and dentine was determined. Enamel wear was determined by change in Knoop indent length and dentine wear was determined from the enamel-dentine step height, measured using optical profilometry.

RESULTS

The mean wear after 12 weeks was for enamel 0.27 and 0.19 microns, and for dentine 34.3 and 61.1 microns, for the calcium carbonate/perlite and silica toothpastes respectively. There were no significant differences between products after 12 weeks. The rate of wear was found to decrease throughout the duration of the study.

CONCLUSION

There were no significant differences between the two whitening toothpastes in terms of enamel and dentine wear after 12 weeks brushing.

The effect of a calcium carbonate/perlite toothpaste on the removal of extrinsic tooth stain in two weeks

OBJECTIVE

To assess the effect of a calcium carbonate/perlite toothpaste on the levels of extrinsic stain removed at two weeks compared to a silica control toothpaste.

DESIGN

In this parallel group, double-blind study, subjects were stratified by natural baseline stain and tobacco use and allocated at random to one of the two study toothpastes. Subjects brushed with their allocated toothpaste twice daily for two weeks before extrinsic tooth stain was again assessed.

SETTING

The study was performed at 4-Front Research UK Limited, Maldon, UK.

PARTICIPANTS

152 adult subjects with at least eight assessable incisors/ canines with natural extrinsic tooth stain completed the study.

METHODS

The extrinsic tooth stain on the facial surfaces of incisors and canines was measured using the Macpherson modification of the Lobene Stain Index.

RESULTS

Both of the toothpaste groups had significantly less stain after two weeks of use compared to the baseline value (p<0.001). Analysis of covariance on the sum of the whole mouth stain scores showed that the calcium carbonate/perlite toothpaste removed significantly more stain over the two week study than the silica control toothpaste (p<0.05).

CONCLUSIONS

Twice daily brushing for two weeks with a calcium carbonate/perlite toothpaste removes more extrinsic stain than a silica control toothpaste.

Effect of toothpaste with natural calcium carbonate/perlite on extrinsic tooth stain

OBJECTIVE

The current study was designed to determine the effect of natural calcium carbonate toothpaste containing Perlite and microgranules (Whitening toothpaste) on extrinsic tooth stain compared to a standard commercial toothpaste formulation with precipitated calcium carbonate (PCC) as abrasive and a commercial toothpaste with dicalcium phosphate dihydrate (DCPD) as abrasive.

METHODS

The toothpastes were evaluated in a double blind, three-cell, stratified (tobacco use; baseline tooth stain level), parallel group design study involving 600 subjects with extrinsic tooth stain. Subjects brushed twice daily with their allocated toothpaste for four weeks. Extrinsic tooth stain was measured using the Macpherson modification of the Lobene stain index.

RESULTS

ANCOVA showed significant differences between toothpastes (p=0.037). Subsequent multiple comparisons using pairwise t-tests, showed the Whitening toothpaste to be superior to the DCPD toothpaste (p=0.014) and the PCC toothpaste (p=0.067). When a Box-Cox transformation was made to the data (y0.6) to improve normality, these two differences were more accurately estimated at p=0.004 and p=0.03 respectively.

CONCLUSION

The Whitening toothpaste has been shown to be significantly more effective in tooth stain removal than the two standard commercial toothpaste formulations.

Evaluation of a 6% hydrogen peroxide tooth whitening gel on enamel and dentine microhardness in vitro

OBJECTIVES

The aims of this study were to evaluate the effects of a novel 6% hydrogen peroxide containing tooth whitener, Xtra White (XW), on enamel and dentine microhardness in vitro.

METHODS

Polished human enamel and dentine specimens were prepared and baseline microhardness determined. In study 1, enamel specimens were exposed to 20 min cycles of either water, XW or Sprite Light for up to 28 cycles. In studies 2 and 3, enamel specimens were treated with 20 min cycles of either XW or water and exposed to whole saliva at all other times. In study 3, an additional exposure to a fluoride containing toothpaste was conducted. In total, 28 treatments were conducted in order to simulate a 2 weeks product use. In study 4, dentine specimens were treated as per study 3. Final microhardness measurements were taken and for studies 3 and 4 colour measurements were additionally taken.

RESULTS

XW and water gave no statistically significant (p>0.05) changes in enamel and dentine microhardness after 28 treatments. Sprite Light gave a significant (p<0.00002) reduction in enamel microhardness after one 20 min treatment. XW showed significant bleaching of enamel and dentine specimens as compared to the water control.

CONCLUSIONS

XW does not have any significant effect on enamel and dentine microhardness.

In vitro evaluation of a novel 6% hydrogen peroxide tooth whitening product

OBJECTIVES

The aims of this study were to evaluate the in vitro tooth whitening effects of a novel 6% hydrogen peroxide containing tooth whitener Xtra White (XW) on extrinsic stain and intrinsic tooth colour and the effects on enamel and dentine microhardness. In addition, to determine the levels of peroxide found in tooth pulp chambers after treatment with XW in vitro.

METHODS

Extrinsic stain changes were determined by measuring colour changes of tea stained hydroxyapatite discs after treatment with water, placebo gel, XW or Colgate Simply White (CSW). Intrinsic tooth colour changes were determined by treating extracted human teeth in vitro with a placebo gel, XW or CSW for a simulated two weeks use and measuring colour differences with a chroma meter. Teeth treated with placebo gel and XW were cross-sectioned and the subsurface enamel and dentine was polished and the microhardness determined. The peroxide concentration found in extracted tooth pulp chambers was determined spectrophotometrically.

RESULTS

XW gave significantly more extrinsic stain removal (p<0.0001) and an increase in tooth whiteness (p<0.05) than a placebo gel, but was not significantly different to CSW. There were no significant differences in subsurface enamel and dentine microhardness values for the placebo and XW treated teeth. The mean concentration of peroxide found in the tooth pulp chambers was 0.44 mM, which is over 3000 times below the concentration reported to cause pulpal enzyme damage.

CONCLUSIONS

XW has been shown to be an effective tooth whitening product in vitro with support for its safety on subsurface enamel and dentine together with its safety on tooth pulp tissue.

Tooth colour: a review of the literature

OBJECTIVES

To review current knowledge with respect to tooth colour and its measurement.

METHODS

'Medline' database for the period 1966 to the present day and 'ISI Web of Science' database for the period 1974 to the present day were searched electronically with key words tooth, teeth, colour and color.

CONCLUSIONS

The colour and appearance of teeth is a complex phenomenon, with many factors such as lighting conditions, translucency, opacity, light scattering, gloss and the human eye and brain influencing the overall perception of tooth colour. The measurement of tooth colour is possible via a number of methods including visual assessment with shade guides, spectrophotometry, colourimetry and computer analysis of digital images. These methods have successfully been used to measure longitudinal tooth colour changes when the dentition has undergone tooth whitening procedures.

Safety evaluation of a novel whitening gel, containing 6% hydrogen peroxide and a commercially available whitening gel containing 18% carbamide peroxide in an exaggerated use clinical study

OBJECTIVES

The aim of this study was to compare the effect on oral soft tissue of a self-applied tooth whitening gel containing 6% hydrogen peroxide (Xtra White) with a marketed paint-on whitening gel containing 18% carbamide peroxide (Colgate Simply White) after 2-weeks of using products four times daily.

METHODS

A 2-week, examiner-blind, stratified, parallel design clinical trial was conducted. Twenty subjects were divided into two groups, balanced according to age and gender. Subjects followed a 2-week, twice-daily regimen of brushing with standard fluoride toothpaste and applied gel product to facial aspects of six upper and six lower incisors/canines, twice in succession with 30 min between applications. Soft tissue examinations were performed on Day 1, before the first application of the test products, and on Day 2, 5, 8 and 15.

RESULTS

During the 2-week treatment period, twelve adverse reactions were recorded as potentially attributable to the study products, evenly split between the two test groups. All reports were mild in symptoms and resolved without the need of medical intervention. None of the subjects experiencing an adverse event requested to be withdrawn from the study.

CONCLUSIONS

Under the exaggerated use conditions of this test, there was no evidence to suggest that either of the whitening gels produced irritation that was building or developing during the course of the study. It is concluded that both products are safe for their intended use.