Design and development of gliclazide-loaded chitosan microparticles for oral sustained drug delivery: in-vitro/in-vivo evaluation

Pectin nanoparticles loaded with nitric oxide donor drug: A potential approach for tissue regeneration

The process of wound healing and tissue regeneration involves several key mechanisms to ensure the production of new tissues with similar cellular functions. This study investigates the impact of pectin, a natural polysaccharide, and nebivolol hydrochloride (NBV), a nitric oxide (NO) donor drug, on wound healing. Utilizing ionotropic gelation, NBV-loaded pectin nanoparticles were developed following a 2231 full factorial design. The optimized formulation, determined using Design expert® software, exhibited an encapsulation efficiency percentage of 70.68%, zeta potential of -51.4 mV, and a particle size of 572 nm, characterized by a spherical, discrete morphology. An in vivo study was conducted to evaluate the effectiveness of the optimal formulation in wound healing compared to various controls. The results demonstrated the enhanced ability of the optimal formulation to accelerate wound healing. Moreover, histopathological examination further confirmed the formulation's benefits in tissue proliferation and collagen deposition at the wound site 15 days post-injury. This suggests that the developed formulation not only promotes faster healing but does so with minimal side effects, positioning it as a promising agent for effective wound healing and tissue regeneration.

Formulation and Characterization of New Polymeric Systems Based on Chitosan and Xanthine Derivatives with Thiazolidin-4-One Scaffold

In the past many research studies have focused on the thiazolidine-4-one scaffold, due to the important biological effects associated with its heterocycle. This scaffold is present in the structure of many synthetic compounds, which showed significant biological effects such as antimicrobial, antifungal, antioxidant, anti-inflammatory, analgesic, antidiabetic effects. It was also identified in natural compounds, such as actithiazic acid, isolated from Streptomyces strains. Starting from this scaffold new xanthine derivatives have been synthetized and evaluated for their antibacterial and antifungal effects. The antibacterial action was investigated against Gram positive (Staphyloccoccus aureus ATCC 25923, Sarcina lutea ATCC 9341) and Gram negative (Escherichia coli ATCC 25922) bacterial strains. The antifungal potential was investigated against Candida spp. (Candida albicans ATCC 10231, Candida glabrata ATCC MYA 2950, Candida parapsilosis ATCC 22019). In order to improve the antimicrobial activity, the most active xanthine derivatives with thiazolidine-4-one scaffold (XTDs: 6c, 6e, 6f, 6k) were included in a chitosan based polymeric matrix (CS). The developed polymeric systems (CS-XTDs) were characterized in terms of morphological (aspect, particle size), physic-chemical properties (swelling degree), antibacterial and antifungal activities, toxicity, and biological functions (bioactive compounds loading, entrapment efficiency). The presence of xanthine-thiazolidine-4-one derivatives into the chitosan matrix was confirmed using Fourier transform infrared (FT-IR) analysis. The size of developed polymeric systems, CS-XTDs, ranged between 614 µm and 855 µm, in a dry state. The XTDs were encapsulated into the chitosan matrix with very good loading efficiency, the highest entrapment efficiency being recorded for CS-6k, which ranged between 87.86 ± 1.25% and 93.91 ± 1.41%, depending of the concentration of 6k. The CS-XTDs systems showed an improved antimicrobial effect with respect to the corresponding XTDs. Good results were obtained for CS-6f, for which the effects on Staphylococcus aureus ATCC 25923 (21.2 ± 0.43 mm) and Sarcina lutea ATCC 9341 (25.1 ± 0.28 mm) were comparable with those of ciprofloxacin (25.1 ± 0.08 mm/25.0 ± 0.1 mm), which were used as the control. The CS-6f showed a notable antifungal effect, especially on Candida parapsilosis ATCC 22019 (18.4 ± 0.42 mm), the effect being comparable to those of nystatin (20.1 ± 0.09 mm), used as the control. Based on the obtained results these polymeric systems, consisting of thiazolidine-4-one derivatives loaded with chitosan microparticles, could have important applications in the food field as multifunctional (antimicrobial, antifungal, antioxidant) packaging materials.

Morphological, Stability, and Hypoglycemic Effects of New Gliclazide-Bile Acid Microcapsules for Type 1 Diabetes Treatment: the Microencapsulation of Anti-diabetics Using a Microcapsule-Stabilizing Bile Acid

When we administered orally a mixture of the anti-diabetic drug, gliclazide (G) and a primary bile acid, they exerted a hypoglycemic effect in a rat model of type 1 diabetes (T1D), but stability of mixture was limited. We aimed to develop and characterize microcapsules incorporating G with a microcapsule-stabilizing bile acid, ursodeoxycholic acid (UDCA). Sodium alginate (SA)-based microcapsules were prepared with either G or G with UDCA and analyzed in terms of morphological, physico-chemical, and electro-chemical characteristics at different pH and temperatures. The microcapsules' effects on viability on muscle cell line (C2C12) and on diabetic rats' blood glucose levels and inflammatory profiles were also examined. Bile acid-based microcapsules maintained their morphology, showed good stability, and compatibility profiles, and the incorporation of UDCA resulted in less G content per microcapsule (p < 0.01) and production of stronger microcapsules that were more resistant to mechanical pressure (p < 0.01). G-UDCA-SA microcapsules enhanced muscle cell viability at higher glucose concentrations compared with control (G-SA and UDCA-SA), and they had strong anti-inflammatory effects on diabetic rats. In addition, the incorporation of UDCA into G microcapsules enhanced the physical characteristics of the microcapsules and optimized G delivery after oral administration.

Polymer blends used to develop felodipine-loaded hollow microspheres for improved oral bioavailability

Felodipine (FD) has been widely used in anti-hypertensive treatment. However, it has extremely low aqueous solubility and poor bioavailability. To address these problems, FD hollow microspheres as multiple-unit dosage forms were synthesized by a solvent diffusion evaporation method. Particle size of the hollow microspheres, types of ethylcellulose (EC), amounts of EC, polyvinyl pyrrolidone (PVP) and FD were investigated based on an orthogonal experiment of three factors and three levels. In addition, the release kinetics in vitro and pharmacokinetics in beagle dogs of the optimized FD hollow microspheres was investigated and compared with Plendil (commercial FD sustained-release tablets) as a single-unit dosage form. Results showed that the optimal formulation was composed of EC_{10 cp}:PVP:FD (0.9:0.16:0.36, w/w). The FD hollow microspheres were globular with a hollow structure and have high drug loading (17.69±0.44%) and floating rate (93.82±4.05%) in simulated human gastric fluid after 24h. Pharmacokinetic data showed that FD hollow microspheres exhibited sustained-release behavior and significantly improved relative bioavailability of FD compared with the control. Pharmacodynamic study showed that the FD hollow microspheres could effectively lower blood pressure. Therefore, these findings demonstrated that the hollow microspheres were an effective sustained-release delivery system for FD.

Quaternized chitosan nanoparticles loaded with the combined attenuated live vaccine against Newcastle disease and infectious bronchitis elicit immune response in chicken after intranasal administration

Newcastle disease (ND) and infectious bronchitis (IB) are important diseases, which cause respiratory diseases in chickens, resulting in severely economic losses in the poultry industry. In this study, N-2-hydroxypropyl trimethyl ammonium chloride chitosan (N-2-HACC) and N,O-carboxymethyl chitosan (CMC) were synthesized as adjuvant and delivery carrier for vaccine antigens. N-2-HACC-CMC/NDV/IBV nanoparticles (NPs) (NDV/La Sota and IBV/H120 encapsulated in N-2-HACC-CMC NPs) and N-2-HACC-CMC/NDV-IBV NPs (the mixing of N-2-HACC-CMC/NDV NPs and N-2-HACC-CMC/IBV NPs in a ratio of 1:1) were prepared by the polyelectrolyte composite method, respectively. Both nanoparticles exhibited lower cytotoxicity and higher stability. Their bioactivities were maintained when they were stored at 37 °C for three weeks. Release assay in vitro showed that both NDV and IBV could be sustainably released from the nanoparticles after an initial burst release. In vivo immunization of chickens showed that N-2-HACC-CMC/NDV/IBV NPs or N-2-HACC-CMC/NDV-IBV NPs intranasally induced higher titers of IgG and IgA antibodies, significantly promoted proliferation of lymphocytes and induced higher levels of interleukine-2 (IL-2), IL-4 and interferon-γ (IFN-γ) than the commercially combined attenuated live vaccine did. This is the first study in the field of animal vaccines demonstrating that intranasal administration of chickens with antigens (NDV and IBV) encapsulated with chitosan derivative could induce humoral, cellular, and mucosal immune responses, which protected chickens from the infection of highly virulent NDV and IBV. This study indicated that N-2-HACC-CMC could be used as an efficient adjuvant and delivery carrier for further development of mucosal vaccines and drugs and could have an immense application potential in medicine.

Biological evaluation of N-2-hydroxypropyl trimethyl ammonium chloride chitosan as a carrier for the delivery of live Newcastle disease vaccine

Mucosal immune system plays a very important role in antiviral immune response. We prepared Newcastle disease viruses (NDV) encapsulated in N-2-hydroxypropyl trimethyl ammonium chloride chitosan (N-2-HACC) nanoparticles (NDV/La Sota-N-2-HACC-NPs) by an ionic cross linking method, and assessed the potential of N-2-HACC-NPs as a mucosal immune delivery carrier. The properties of the nanoparticles were determined by transmission electron microscopy, Zeta potential and particle size analysis, encapsulation efficiency and loading capacity. NDV/La Sota-N-2-HACC-NPs have regular spherical morphologies and high stability; with 303.88±49.8nm mean diameter, 45.77±0.75mV Zeta potential, 94.26±0.42% encapsulation efficiency and 54.06±0.21% loading capacity. In vitro release assay indicated that the release of NDV from NDV/La Sota-N-2-HACC-NPs is slow. The NDV/La Sota-N-2-HACC-NPs have good biological characteristics, very low toxicity and high level of safety. Additionally, specific pathogen-free chickens immunized with NDV/La Sota-N-2-HACC-NPs showed much stronger cellular, humoral and mucosal immune responses than commercial attenuated live Newcastle disease vaccine, and NDV/La Sota-N-2-HACC-NPs reached the sustainable release effect. Our study here provides a foundation for the further development of mucosal vaccines and drugs, and the N-2-HACC-NPs should be a potential drug delivery carrier with immense potential in medical applications.

Influence of Chitosan Nanoparticles as the Absorption Enhancers on Salvianolic acid B In vitro and In vivo Evaluation

Background:

Salvianolic acid B (SalB) represents the most abundant and bio-active phenolic constituent among the water-soluble compounds of Salvia miltiorrhiza. But the therapeutic potential of SalB has been significantly restricted by its poor absorption.

Methods:

In this study, chitosans (CS) and CS nanoparticles (NPs) with different molecular weights (MWs), which have influence on the absorption of SalB, was also investigated.

Results:

As a preliminary study, water-soluble CS with various MWs (3, 30, 50, and 100 kDa) was chosen. We investigated the MW-dependent Caco-2 cell layer transport phenomena in vitro of CS and NPs at concentrations (4 μg/ml, w/v). SalB, in presence CS or NPs has no significant toxic effect on Caco-2 cell. As the MW increases, the absorption enhancing effect of CS increases. However, as the MW decreases, the absorption enhancing effect of NPs increases. The AUC_0–∞ of the SalB-100 kDa CS was 4.25 times greater than that of free SalB. And the AUC_0–∞ of the SalB-3 kDa NPs was 16.03 times greater than that of free SalB.

Conclusion:

CS and NPs with different MWs as the absorption enhancers can promote the absorption of SalB. And the effect on NPs is better than CS.

SUMMARY

Formation mechanism for NPs

The role of the bile acid chenodeoxycholic acid in the targeted oral delivery of the anti-diabetic drug gliclazide, and its applications in type 1 diabetes

Gliclazide (G) is used to treat type 2 diabetes (T2D), and also has anti-platelet, anti-radical, and anti-inflammatory effects. G has poor water solubility and high inter-individual variations in absorption, limiting its application in type 1 diabetes (T1D). The bile acid, chenodeoxycholic acid (CDCA), has permeation-enhancing effects. Sodium alginate (SA) was used to microencapsulate G and CDCA to produce control (G-SA) and test (G-CDCA-SA) microcapsules. Both microcapsules showed uniform structure, morphology, and good stability profiles. CDCA reduced G-release at pH 7.8, while G-release was negligible at lower pH values in both microcapsules. CDCA incorporation resulted in less swelling and stronger microcapsules, suggesting improved stability.

O-2'-hydroxypropyltrimethyl ammonium chloride chitosan nanoparticles for the delivery of live Newcastle disease vaccine

A novel complex chitosan derivative, O-2'-hydroxypropyltrimethyl ammonium chloride chitosan (O-2'-HACC), was synthesized and used to make nanoparticles as a delivery vehicle for live attenuated Newcastle disease vaccine. We found that O-2'-HACC had high antimicrobial activity, low toxicity, and a high safety level. Newcastle disease virus (NDV) was then encapsulated in the O-2'-HACC nanoparticles (NDV/La Sota-O-2'-HACC-NPs) by the ionic crosslinking method, and the properties of the resulting nanoparticles were determined by transmission electron microscopy, Zeta potential analysis, Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and X-ray diffraction. NDV/La Sota-O-2'-HACC-NPs had regular spherical morphologies and high stability, with an encapsulation efficiency of 95.68 ± 2.2% and a loading capacity of 58.75 ± 4.03%. An in vitro release assay indicated that release of NDV from NDV/La Sota-O-2'-HACC-NPs occurred slowly. Specific pathogen-free chickens immunized with NDV/La Sota-O-2'-HACC-NPs intranasally had much stronger cellular, humoral and mucosal immune responses than did those immunized intramuscularly or with live attenuated Newcastle disease vaccine. NDV/La Sota-O-2'-HACC-NPs are a novel drug delivery carrier with immense potential in medical applications.

Didanosine-loaded chitosan microspheres optimized by surface-response methodology: a modified "Maximum Likelihood Classification" approach formulation for reverse transcriptase inhibitors

Didanosine-loaded chitosan microspheres were developed applying a surface-response methodology and using a modified Maximum Likelihood Classification. The operational conditions were optimized with the aim of maintaining the active form of didanosine (ddI), which is sensitive to acid pH, and to develop a modified and mucoadhesive formulation. The loading of the drug within the chitosan microspheres was carried out by ionotropic gelation technique with sodium tripolyphosphate (TPP) as cross-linking agent and magnesium hydroxide (Mg(OH)₂) to assure the stability of ddI. The optimization conditions were set using a surface-response methodology and applying the "Maximum Likelihood Classification", where the initial chitosan concentration, TPP and ddI concentration were set as the independent variables. The maximum ddI-loaded in microspheres (i.e. 1433 mg of ddI/g chitosan), was obtained with 2% (w/v) chitosan and 10% TPP. The microspheres depicted an average diameter of 11.42 μm and ddI was gradually released during 2 h in simulated enteric fluid.

Novel drug delivery system: an immense hope for diabetics

CONTEXT

Existing medication systems for the treatment of diabetes mellitus (DM) are inconvenient and troublesome for effective and safe delivery of drugs to the specific site. Therefore, investigations are desired to deliver antidiabetics using novel delivery approaches followed by their commercialization.

OBJECTIVE

The present review aims to provide a compilation on the latest development in the field of novel drug delivery systems (NDDSs) for antidiabetics with special emphasis on particulate, vesicular and miscellaneous systems.

METHODS

Review of literature (restricted to English language only) was done using electronic databases like Pubmed® and Scirus, i.e. published during 2005-2013. The CIMS/MIMS India Medical Drug Information eBook was used regarding available marketed formulation of antidiabetic drugs. Keywords used were "nanoparticle", "microparticle", "liposomes", "niosomes", "transdermal systems", "insulin", "antidiabetic drugs" and "novel drug delivery systems". Single inclusion was made for one article. If in vivo study was not done then article was seldom included in the manuscript.

RESULTS

The curiosity to develop NDDSs of antidiabetic drugs with special attention to the nanoparticulate system followed by microparticulate and lipid-based system is found to emerge gradually to overcome the problems associated with the conventional dosage forms and to win the confidence of end users towards the higher acceptability.

CONCLUSION

In the current scientific panorama when the area of novel drug delivery system has been recognized for its palpable benefits, unique potential of providing physical stability, sustained and site-specific drug delivery for a scheduled period of time can open new vistas for precise, safe and quality treatment of DM.

Novel artificial cell microencapsulation of a complex gliclazide-deoxycholic bile acid formulation: a characterization study

Gliclazide (G) is an antidiabetic drug commonly used in type 2 diabetes. It has extrapancreatic hypoglycemic effects, which makes it a good candidate in type 1 diabetes (T1D). In previous studies, we have shown that a gliclazide-bile acid mixture exerted a hypoglycemic effect in a rat model of T1D. We have also shown that a gliclazide-deoxycholic acid (G-DCA) mixture resulted in better G permeation in vivo, but did not produce a hypoglycemic effect. In this study, we aimed to develop a novel microencapsulated formulation of G-DCA with uniform structure, which has the potential to enhance G pharmacokinetic and pharmacodynamic effects in our rat model of T1D. We also aimed to examine the effect that DCA will have when formulated with our new G microcapsules, in terms of morphology, structure, and excipients' compatibility. Microencapsulation was carried out using the Büchi-based microencapsulating system developed in our laboratory. Using sodium alginate (SA) polymer, both formulations were prepared: G-SA (control) at a ratio of 1:30, and G-DCA-SA (test) at a ratio of 1:3:30. Complete characterization of microcapsules was carried out. The new G-DCA-SA formulation was further optimized by the addition of DCA, exhibiting pseudoplastic-thixotropic rheological characteristics. The size of microcapsules remained similar after DCA addition, and these microcapsules showed no chemical interactions between the excipients. This was supported further by the spectral and microscopy studies, suggesting microcapsule stability. The new microencapsulated formulation has good structural properties and may be useful for the oral delivery of G in T1D.

An advanced microencapsulated system: a platform for optimized oral delivery of antidiabetic drug-bile acid formulations

INTRODUCTION

In previous studies, we have shown that a gliclazide-cholic acid derivative (G-CA) mixture resulted in an enhanced ileal permeation of G (ex vivo). When administered orally to diabetic rats, it brought about a significant hypoglycaemic effect. In this study, we aim to create a novel microencapsulated-formulation of G-CA with uniform and coherent structure that can be further tested in our rat model of type 1 diabetes (T1D). We also aim to examine the effect of CA addition to G microcapsules in the morphology, structure and excipients' compatibility of the newly designed microcapsules.

METHOD

Microencapsulation was carried out using our Buchi-based microencapsulating system developed in our laboratory. Using sodium alginate (SA) polymer, both formulations were prepared: G-SA (control) and G-CA-SA (test) at a constant ratio (1:3:30), respectively. Complete characterizations of microcapsules were carried out.

RESULTS

The new G-CA-SA formulation is further optimized by the addition of CA exhibiting pseudoplastic-thixotropic rheological characteristics. Bead size remains similar after CA addition, the new microcapsules show no chemical interactions between the excipients and this was supported further by the spectral studies suggesting bead stability.

CONCLUSION

The new microencapsulated-formulation has good and uniform structural properties and may be suitable for oral delivery of antidiabetic-bile acid formulations.

Enhanced dissolution and oral bioavailability of tanshinone IIA base by solid dispersion system with low-molecular-weight chitosan

OBJECTIVES

The aim of this study is to improve the dissolution and oral bioavailability of tanshinone IIA (TAN).

METHODS

Solid dispersions of TAN with low-molecular-weight chitosan (LMC) were prepared and the in-vitro dissolution and in-vivo performance were evaluated.

KEY FINDINGS

At 1 h, the extent of dissolution of TAN from the LMC-TAN system (weight ratio 9 : 1) increased about 368.2% compared with the pure drug. Increasing the LMC content from 9 : 1 to 12 : 1 in this system did not significantly increase the rate and the extent of dissolution. Differential scanning calorimetry, X-ray diffraction and scanning electron microscopy demonstrated the formation of amorphous tanshinone IIA and the absence of crystallinity in the solid dispersion. Fourier transform infrared spectroscopy revealed that there was no interaction between drug and carrier. In-vivo test showed that LMC-TAN solid dispersion system presented significantly larger AUC0-t , which was 0.67 times that of physical mixtures and 1.17 times that of TAN. Additionally, the solid dispersion generated obviously higher Cmax and shortened Tmax compared with TAN and physical mixtures.

CONCLUSIONS

In conclusion, the LMC -based solid dispersions could achieve complete dissolution, accelerated absorption rate and superior oral bioavailability.

The design and features of apatite-coated chitosan microspheres as injectable scaffold for bone tissue engineering

In this paper we developed two types of chitosan-based microspheres with and without biomimetic apatite coatings and compared their potential as injectable scaffolds for bone regeneration. The microspheres were obtained by emulsion cross-linking (E0) and coacervate precipitation (C0), respectively. They were then biomimetically coated with apatite to become E1 and C1 microspheres. The physicochemical properties and biocompatibility of the microspheres were characterized. Both E0 and C0 microspheres presented favorable ranges of diameter, density and Rockwell hardness. However, there were differences in the degree of cross-linking, shape, morphology, degradation rate, swelling rate, pH value after PBS immersion and the biocompatibility between E0 and C0. The apatite coating was successfully prepared for both C0 and E0, which enhanced the attachment, proliferation and differentiation of MC3T3-E1 cells. In conclusion, our results suggest the feasibility of using chitosan microspheres as a potential injectable scaffold. Both the preparation method and the biomimetic apatite coating contribute to their biological properties.