Thermotolerant hemicellulolytic and cellulolytic enzymes from Eupenicillium parvum 4-14 display high efficiency upon release of ferulic acid from wheat bran

Effect of Pleurotus eryngii mycelial fermentation on the composition and antioxidant properties of tartary buckwheat

In this study, we investigated the effect of solid-state fermentation of Pleurotus eryngii on the composition and antioxidant activity of Tartary buckwheat (TB). Firstly, the solid-state fermentation of P. eryngii mycelium with buckwheat was carried out, and the fermentation process was explored. The results of the extraction process and method selection experiments showed that the percolation extraction method was superior to the other two methods. The results of extraction rate, active components and antioxidant activity measurements before and after fermentation of TB extract showed that the extraction rate increased about 1.7 times after fermentation. Total flavonoids, rutin and triterpene contents were increased after fermentation compared to control. Meanwhile, LC-MS results showed an increase in the content of the most important substances in the fermented TB extract and the incorporation of new components, such as oleanolic acid, ursolic acid, amino acids, and D-chiral inositol. The fermented TB extract showed stronger antioxidant activity, while the protein and amino acid contents increased by 1.93-fold and 1.94-fold, respectively. This research was the first to use P. eryngii to ferment TB and prepared a lyophilized powder that could be used directly using vacuum freeze-drying technology. Not only the use of solid-state fermentation technology advantages of edible fungi to achieve value-added buckwheat, but also to broaden the scope of TB applications. This study will provide ideas and directions for the development and application of edible mushroom fermentation technology and TB.

High-level production of cordycepin by the xylose-utilising Cordyceps militaris strain 147 in an optimised medium

Cordycepin is an important active metabolite of Cordyceps militaris. Xylose, an attractive feedstock for producing chemicals through microbial fermentation, cannot be effectively utilised by many reported C. militaris strains. Herein, a xylose-utilising C. militaris strain 147 produced the highest level of cordycepin (3.03 g/L) in xylose culture. Xylose, alanine, and ammonium citrate were determined as the main affecting factors on the cordycepin production using a Plackett-Burman design. The combination of these factors was optimised using response surface methodology, and the maximal 6.54 g/L of cordycepin was produced by the fungus in the optimal medium. Transcriptome analysis revealed that xylose utilisation upregulated the transcriptional levels of genes participating in purine and energy metabolisms in the fungus, which may facilitate the formation of precursors for cordycepin biosynthesis. This investigation provides new insights into the efficient production of cordycepin and is conducive to the valorisation of biomass rich in xylose.

Insights into the capability of the lignocellulolytic enzymes of Penicillium parvum 4-14 to saccharify corn bran after alkaline hydrogen peroxide pretreatment

BACKGROUND

Corn bran is a major agro-industrial byproduct from corn starch processing. It contains abundant arabinoxylan that can be converted into value-added chemicals via biotechnology. Corn bran arabinoxylan (CBAX) is one of the most recalcitrant xylans for enzymatic degradation due to its particular heterogeneous nature. The present study aimed to investigate the capability of the filamentous fungus Penicillium parvum 4-14 to enzymatically saccharify CBAX and reveal the fungal carbohydrate-active enzyme (CAZyme) repertoire by genome sequencing and secretome analysis.

RESULTS

CBAX1 and CBAX2 with different branching degrees, together with corn bran residue (CBR) were generated from corn bran after alkaline hydrogen peroxide (AHP) pretreatment and graded ethanol precipitation. The protein blends E_CBAX1, E_CBAX2, and E_CBR were produced by the fungus grown on CBAX1, CBAX2, or CBR, respectively. Under the optimal conditions, E_CBAX1 released more than 80% xylose and arabinose from CBAX1 and CBAX2. Almost complete saccharification of the arabinoxylans was achieved by combining E_CBAX1 and a commercial enzyme cocktail Cellic®CTec3. Approximately 89% glucose, 64% xylose, and 64% arabinose were liberated from CBR by E_CBR. The combination of E_CBR with Cellic®CTec3 enhanced the saccharification of CBR, with conversion ratios of 97% for glucose, 81% for xylose, and 76% for arabinose. A total of 376 CAZymes including plentiful lignocellulolytic enzymes were predicted in P. parvum based on the fungal genomic sequence (25.8 Mb). Proteomic analysis indicated that the expression of CAZymes in P. parvum varied between CBAX1 and CBR, and the fungus produced complete cellulases, numerous hemicellulases, as well as high levels of glycosidases under the culture conditions.

CONCLUSIONS

This investigation disclosed the CAZyme repertoire of P. parvum at the genomic and proteomic levels, and elaborated on the promising potential of fungal lignocellulolytic enzymes upon saccharification of corn bran biomass after AHP pretreatment.

Improved Release of Monosaccharides and Ferulic Acid Using Enzyme Blends From Aspergillus Niger and Eupenicillium Parvum

Supplementing commercial xylanase and cellulase with selected debranching enzymes only resulted in slight enhancement of the enzymatic hydrolysis of wheat bran autohydrolysis residues (WBAR) which was obtained at 160°C over a 30-min period of autohdyrolysis, while a blend of enzymes from Aspergillus niger and Eupenicillium parvum achieved synergistic efficacy in this context. Using an equal mixture blend of these enzymes at a 0.5% (w/w) enzyme loading dosage with the addition of ferulic acid esterase (1 U/g substrate), the obtained hydrolysis yields were desirable, including 84.98% of glucose, 84.74% of xylose, 80.24% of arabinose, and 80.86% of ferulic acid. Following further separation using an HP-20 resin, the final ferulic acid recovery levels were as high as 62.5% of the esterified ferulic acid present within the initial WBAR input. Together, these data suggest that a combination of autohydrolysis and enzymatic hydrolysis using crude enzyme blends can efficiently achieve wheat bran enzymatic saccharification and associated ferulic acid release.

Functional characterization of a GH62 family α-L-arabinofuranosidase from Eupenicillium parvum suitable for monosaccharification of corncob arabinoxylan in combination with key enzymes

Corncob rich in arabinoxylan is an important raw material widely used in bio-refinery. Complete saccharification of arabinoxylan depends on the synergism of different enzymes including α-L-arabinofuranosidase (ABF). This study aimed to investigate the functional characteristics of a new ABF EpABF62A belonging to glycoside hydrolase (GH) 62 family from the fungus Eupenicillium parvum, and to explore its potential in the saccharification of corncob arabinoxylan. The recombinant EpABF62A showed high activity against wheat arabinoxylan and rye arabinoxylan, with the optimal temperature of 55 °C and pH of 4.5. The protein contains an N-terminal cellulose-binding domain family 1 (CBM_1) domain, and displayed a 59.5% absorption rate to phosphoric acid swollen cellulose. Regioselectivity analysis indicated that the enzyme selectively removed α-1,2 or α-1,3 linked arabinofuranosyl residues on mono-substituted xylose residues on arabinoxylan. Corncob arabinoxylans (CAX1 or CAX2) with different (low or high) branching degrees were extracted from the raw material by alkaline hydrogen peroxide pretreatment and graded ethanol precipitation. Single EpABF62A removed 69.5% or 67.1% arabinose from CAX1 or CAX2, respectively. EpABF62A combined with a GH10 xylanase, a GH43 β-D-xylosidase and a GH67 α-glucuronidase released 75.0% or 64.5% xylose from CAX1 or CAX2, respectively. The addition of the four hemicellulases enhanced the saccharification the solid fraction of the pretreated corncob by the commercial cellulase Cellic® CTec2, and the conversion ratios of glucose, xylose and arabinose were up to 94.0%, 91.8% and 82.6%, respectively.

Feeding strategies to optimize vanillin production by Amycolatopsis sp. ATCC 39116

The growing consumer demand for natural products led to an increasing interest in vanillin production by biotechnological routes. In this work, the biotechnological vanillin production by Amycolatopsis sp. ATCC 39116 is studied using ferulic acid as precursor, aiming to achieve maximized vanillin productivities. During biotech-vanillin production, the effects of glucose, vanillin and ferulic acid concentrations in the broth proved to be relevant for vanillin productivity. Concerning glucose, its presence in the broth during the production phase avoids vanillin conversion to vanillic acid and, consequently, increases vanillin production. To avoid the accumulation of vanillin up to a toxic concentration level, a multiple-pulse-feeding strategy is implemented, with intercalated vanillin removal from the broth and biomass recovery. This strategy turned out fruitful, leading to 0.46 g L^-1 h^-1 volumetric productivity of vanillin of and a production yield of 0.69 g_vanillin g_{ferulic acid}^-1, which are among the highest values reported in the literature for non-modified bacteria.

Characterization and functional analysis of two novel thermotolerant α-L-arabinofuranosidases belonging to glycoside hydrolase family 51 from Thielavia terrestris and family 62 from Eupenicillium parvum

Abstract

Arabinofuranose substitutions on xylan are known to interfere with enzymatic hydrolysis of this primary hemicellulose. In this work, two novel α-l-arabinofuranosidases (ABFs), TtABF51A from Thielavia terrestris and EpABF62C from Eupenicillium parvum, were characterized and functionally analyzed. From sequences analyses, TtABF51A and EpABF62C belong to glycoside hydrolase (GH) families 51 and 62, respectively. Recombinant TtABF51A showed high activity on 4-nitrophenyl-α-l-arabinofuranoside (83.39 U/mg), low-viscosity wheat arabinoxylan (WAX, 39.66 U/mg), high-viscosity rye arabinoxylan (RAX, 32.24 U/mg), and sugarbeet arabinan (25.69 U/mg), while EpABF62C preferred to degrade arabinoxylan. For EpABF62C, the rate of hydrolysis of RAX (94.10 U/mg) was 2.1 times that of WAX (45.46 U/mg). The optimal pH and reaction temperature for the two enzymes was between 4.0 and 4.5 and 65 °C, respectively. Calcium played an important role in the thermal stability of EpABF62C. TtABF51A and EpABF62C showed the highest thermal stabilities at pH 4.5 or 5.0, respectively. At their optimal pHs, TtABF51A and EpABF62C retained greater than 80% of their initial activities after incubation at 55 °C for 96 h or 144 h, respectively. ¹H NMR analysis indicated that the two enzymes selectively removed arabinose linked to C-3 of mono-substituted xylose residues in WAX. Compared with the singular application of the GH10 xylanase EpXYN1 from E. parvum, co-digestions of WAX including TtABF51A and/or EpABF62C released 2.49, 3.38, and 4.81 times xylose or 3.38, 1.65, and 2.57 times of xylobiose, respectively. Meanwhile, the amount of arabinose released from WAX by TtABF51A with EpXYN1 was 2.11 times the amount with TtABF51A alone.

Key points

• Two novel α-l-arabinofuranosidases (ABFs) displayed high thermal stability.

• The thermal stability of GH62 family EpABF62C was dependent on calcium.

• Buffer pH affects the thermal stability of the two ABFs.

• Both ABFs enhance the hydrolysis of WAX by a GH10 xylanase.

Electronic supplementary material

The online version of this article (10.1007/s00253-020-10867-7) contains supplementary material, which is available to authorized users.

A Novel and Simpler Alkaline Hydrolysis Methodology for Extraction of Ferulic Acid from Brewer's Spent Grain and its (Partial) Purification through Adsorption in a Synthetic Resin

This work aims to develop simpler methodologies of extracting ferulic acid (FA) from brewer's spent grain (BSG). BSG is produced by brewing companies at high amounts all over the year and does not possess a direct application. Thus, its use as raw material for extraction of bioactive compounds has gained attention in the last years. FA has different interesting applications in cosmetics, food industry, and pharmaceutics. Several studies aim for its extraction from BSG by various methods, namely alkaline hydrolysis. In the present work, we suggest the use of autoclave to process higher amounts of BSG in a lab scale. A simplification of the regular post-hydrolysis procedures is also proposed to decrease the number of experimental steps and energy costs and to simultaneously increase the extraction yield (up to 470 mg of FA per 100 g of BSG). The adsorption of extracted FA in a synthetic resin is suggested as a partial purification method.

Highly Efficient Extraction of Ferulic Acid from Cereal Brans by a New Type A Feruloyl Esterase from Eupenicillium parvum in Combination with Dilute Phosphoric Acid Pretreatment

Feruloyl esterase (FAE) is a critical enzyme in bio-extraction of ferulic acid (FA) from plant cell wall. A new FAE (EpFAE1) encoding gene was isolated from Eupenicillium parvum and heterologously expressed in Pichia pastoris cells. Based on phylogenetic tree analysis, the protein EpFAE1 belongs to type A of the seventh FAE subfamily. Using methyl ferulate as substrate, the optimum temperature and pH for the catalytic activity of EpFAE1 were 50 °C and 5.5, respectively. The enzyme exhibited high stability at 50 °C, in a wide pH range (3.0-11.0), or in the presence of 2 M of NaCl. Together with the endo-xylanase EpXYN1, EpFAE1 released 72.32% and 4.00% of the alkali-extractable FA from de-starched wheat bran (DSWB) or de-starched corn bran (DSCB), respectively. Meanwhile, the substrates were pretreated with 1.75% (for DSWB) or 1.0% (for DSCB) of phosphoric acid (PA) at 90 °C for 12 h, followed by enzymatic hydrolysis of the soluble and insoluble fractions. The release efficiencies of FA were up to 84.64% for DSWB and 66.73% for DSCB. Combined dilute PA pretreatment with enzymatic hydrolysis is a low-cost and highly efficient method for the extraction of FA from cereal brans.

Advances in combined enzymatic extraction of ferulic acid from wheat bran

Wheat bran could be utilised as feedstock for innovative and sustainable biorefinery processes. Here, an enzymatic hydrolysis process for ferulic acid (FA) extraction was optimised step by step for total wheat bran (Tritello) and then also applied to the outer bran layer (Bran 1). Proteins, reducing sugars, total phenols and FA were quantified. The highest FA yields (0.82-1.05 g/kg bran) were obtained either by rehydrating the bran by autoclaving (Tritello) or by steam explosion (Bran 1) using a bran/water ratio of 1:20, followed by enzymatic pre-treatment with Alcalase and Termamyl, to remove protein and sugars, and a final enzymatic hydrolysis with Pentopan and feruloyl esterase to solubilise phenol. FA was recovered from the final digestate via solid phase extraction. A 40-fold scale-up was also performed and the release of compounds along all the process steps and at increasing incubation times was monitored. Results showed that FA was initially present at a minimum level while it was specifically released during the enzymatic treatment. In the final optimized process, the FA extraction yield was higher than that obtained with NaOH control hydrolysis while, in comparison with other FA enzymatic extraction methods, fewer process steps were required and no buffers, strong acid/alkali nor toxic compounds were used. Furthermore, the proposed process may be easily scaled-up, confirming the feasibility of wheat bran valorisation by biorefinery processes to obtain valuable compounds having several areas of potential industrial exploitation.