Histomorphometric Analysis of Osseointegrated Intraosseous Dental Implants Using Undecalcified Specimens: A Scoping Review

Bone histology and histomorphometry are reliable diagnostic tools for the assessment of the bone-implant interface, material safety and biocompatibility, and tissue response. They allow for the qualitative and quantitative analysis of undecalcified bone specimens. This scoping review aims to identify the most common staining techniques, study models for in vivo experiments, and histomorphometric parameters used for quantitative bone evaluation of osseointegrated dental implants in the last decade. The Web of Science, PubMed, and Scopus databases were searched on 1 July 2024 for relevant articles in English, published in the last ten years, and the data were exported to an MS Excel spreadsheet. A total of 115 studies met the eligibility criteria and were included in the present review. The results indicate that the most common study models are dogs, rabbits, and pigs. Some of the most frequently used methods for the assessment of the bone-implant interface are the Toluidine blue, Stevenel's blue with Van Gieson, and Levai-Laczko stainings. The results from this study demonstrate that the most commonly used histomorphometric parameters in implant dentistry are the bone-to-implant contact (BIC), bone area fraction occupancy (BAFO), bone area (BA), and bone density (BD). This review presents the recent trends in histomorphometric analysis of dental implants and identifies some research gaps that necessitate further research.

Influence of buccal bone wall thickness on the peri-implant hard and soft tissue dimensional changes: A systematic review

BACKGROUND

The significance on the association between the peri-implant bucco-lingual dimension (BLD) at the stage of implant placement and the occurrence of biological and esthetic complications is yet unknown.

MATERIAL AND METHODS

Systematic screening of electronic sources was carried out to identify clinical and preclinical studies reporting on the baseline BLD and/or buccal bone thickness (BBT) values. A secondary objective was to assess the effect of simultaneous grafting at sites with deficient or no buccal bone wall (BBW) at baseline. The primary outcome variables were BBT, BLD, and buccal vertical bone loss (VBL) at re-evaluation. Moreover, radiographic, clinical, and patient-reported outcome measures (PROMs) were evaluated.

RESULTS

Overall, 12 clinical and four preclinical studies met the inclusion criteria. Inconsistencies were found in defining the critical BBT across the clinical and preclinical data evaluated. The clinical evidence demonstrated that during healing, dimensional changes occur in the alveolar bone and in the BBW that may compromise the integrity of the peri-implant bone, leading to VBL and mucosal recession (MR), particularly in scenarios exhibiting a thin BBW. The preclinical evidence validated the fact that implants placed in the presence of a thin BBW, are more prone to exhibit major dimensional changes and VBL. Moreover, the clinical data supported that, in scenarios where dehiscence-type defects occur and are left for spontaneous healing, greater VBL and MR together with the occurrence of biologic complications are expected. Furthermore, the augmentation of dehiscence-type defects is associated with hard and soft tissue stability. PROMs were not reported.

CONCLUSIONS

Dimensional changes occur as result of implant placement in healed ridges that may lead to instability of the peri-implant hard and soft tissues. Sites presenting a thin BBW are more prone to exhibit major changes that may compromise the integrity of the buccal bone and may lead to biologic and esthetic complications.

Clinical and radiographic assessment of circular versus triangular cross-section neck implants in the posterior maxilla: Five-year follow-up of a randomized controlled trial

OBJECTIVES

Dental implants with a triangular neck design have been developed in order to maintain peri-implant bone. The primary aim of this randomized controlled trial (RCT) was to assess after 5 years the peri-implant bone stability and the peri-implant soft tissue conditions with this new triangular implant neck design compared to a conventional round neck implant design.

MATERIAL AND METHODS

This is a secondary evaluation of a RCT including 34 patients. Patients were recalled after 1, 3, and finally 5 years to assess implant survival and peri-implant bone levels using standardized radiographs. Peri-implant soft tissue health was also evaluated by recording probing depth, plaque index and Bleeding on Probing. Patient Reported Outcome Measures (PROMs) and the Pink Esthetic Score were also assessed.

RESULTS

No implant loss occurred during the 5-year follow up period. The mean ± SD proximal bone remodeling after 5 years reached 0.38 ± 0.39 mm for the circular design and 0.29 ± 0.58 mm for the triangular design (p = .49). Peri-implant soft tissue health parameters and PROMs were found to be comparable. Altogether, 80% of implants presented peri-implant mucositis whereas one implant (4%) displayed sings of peri-implantitis.

CONCLUSION

The 5-year evaluation of the triangular neck implants showed similar results to the circular neck implants.

Significance of buccal bone wall thickness on the fate of peri-implant hard and soft tissues: A systematic review

BACKGROUND

The significance of the association between the peri-implant buccolingual dimension (BLD) at the stage of implant placement and the occurrence of biological and esthetic complications is yet unknown.

MATERIAL AND METHODS

Systematic screening of electronic sources was carried out to identify clinical and preclinical studies reporting on the baseline BLD and/or buccal bone thickness (BBT) values. A secondary objective was to assess the effect of simultaneous grafting at sites with deficient or no buccal bone wall (BBW) at baseline. The primary outcome variables were BBT, BLD, and vertical bone loss (VBL) at re-evaluation. Moreover, radiographic, clinical- and patient-reported outcome measures (PROMs) were evaluated.

RESULTS

Overall, 12 clinical and four preclinical studies met the inclusion criteria. The clinical evidence demonstrated that during healing, dimensional changes occur in the alveolar bone and in the BBW that may compromise the integrity of bone around a dental implant. The preclinical evidence validated the fact that implants placed in the presence of thin BBW are more prone to exhibit major dimensional changes. Moreover, the clinical and preclinical data supported that in scenarios where dehiscence-type defects are left for spontaneous healing, greater VBL and mucosal recession (MR) together with the occurrence of biologic complications are expected. Furthermore, the augmentation of dehiscence-type defects is associated with hard and soft tissue stability.

CONCLUSIONS

Dimensional changes occur as a result of implant placement in healed ridges that may lead to VBL and MR. Thin BBW (≲2 mm) are prone to exhibit major postchanges that may compromise the integrity of the buccal bone, biologic and esthetic complications.

Clinical and Radiographic Evaluation of a Novel Triangular Implant Neck Design: A Case Series

The objective of this study was to evaluate the clinical and radiographic behavior of a novel triangular neck implant configuration in partially edentulous patients. Sixteen patients with a mean age of 58.3 years, were rehabilitated with 25 implants inserted in the healed sites of the maxilla and mandible; implant diameter was Ø3.3 and 3.9 mm. Clinical and radiographic measurements were first performed at prosthesis delivery that served as baseline; they were further evaluated after a mean period of 15.6 months. The interproximal peri-implant bone levels were the primary outcome; the mesial and distal data were recorded and a mean value was calculated. Secondary outcomes included peri-implant probing depth (PPD) and bleeding on probing (BoP). The paired t-test was used to compare the radiographic and clinical outcomes between baseline and follow-up. The mean bone levels at the mesial and distal aspects at baseline were 0.45 (0.47) and 0.57 (0.69), respectively; at follow-up they were 0.59 (0.42) and 0.78 (0.59), respectively. The differences were not statistically significant. Similarly, no significant differences were found for the clinical parameters. Within the limitations of the present study, it could be concluded that this new triangular neck bone level implant macro-design was used successfully to treat partially edentulous patients. Larger controlled clinical studies are warranted to confirm the present radiographic and clinical findings.

Soft tissue thickness evaluation in screw-retained crowns by the biologically oriented preparation technique (BOPT)

Background

Intraoral scanner evaluation (3Shape, TRIOS®) of soft tissue thickness around convergent collar implants and shoulderless abutments.

Material and Methods

Ambispective longitudinal analytical study with a sample size of 26 implants in 17 patients treated in a private dental clinic. Pacients were divided into two groups: Prama Implants or group 1 (n=19) and Shelta implants combined with XA abutment or group 2 (n=7). Thickness changes after one- and two-year follow-up were analyzed.

Results

In group 1 baseline mean thickness was 6.53 mm (±1.06) and follow-up mean thickness was 8.06 mm (±0.98), in group 2 initial mean thickness was 7.66 mm (±1.09) and follow-up mean thickness was of 8.42 mm (±1.03).

Conclusions

Biologically guided crowns design seems to significantly increase the soft tissue volumen around convergent morphology implants. Key words:Biologic width, peri-implant soft tissue, marginal bone loss, transmucosal implant, convergent collar, BOPT (biological oriented preparation technique), BOPT abutment, soft tissue stability, intraoral scanner.

Pre-Clinical Models in Implant Dentistry: Past, Present, Future

Biomedical research seeks to generate experimental results for translation to clinical settings. In order to improve the transition from bench to bedside, researchers must draw justifiable conclusions based on data from an appropriate model. Animal testing, as a prerequisite to human clinical exposure, is performed in a range of species, from laboratory mice to larger animals (such as dogs or non-human primates). Minipigs appear to be the animal of choice for studying bone surgery around intraoral dental implants. Dog models, well-known in the field of dental implant research, tend now to be used for studies conducted under compromised oral conditions (biofilm). Regarding small animal models, research studies mostly use rodents, with interest in rabbit models declining. Mouse models remain a reference for genetic studies. On the other hand, over the last decade, scientific advances and government guidelines have led to the replacement, reduction, and refinement of the use of all animal models in dental implant research. In new development strategies, some in vivo experiments are being progressively replaced by in vitro or biomaterial approaches. In this review, we summarize the key information on the animal models currently available for dental implant research and highlight (i) the pros and cons of each type, (ii) new levels of decisional procedures regarding study objectives, and (iii) the outlook for animal research, discussing possible non-animal options.

Physical characterization of 3 implant systems made of distinct materials with distinct surfaces

STATEMENT OF PROBLEM

Dental implants undergo various surface treatments. Studies that have characterized their surface and subsurface by using the same methods are scarce.

PURPOSE

The purpose of this study is to physically characterize the surface and subsurface of implant systems made of commercially pure (cp) titanium (Ti) grade (gr) 4 and Ti alloy gr 23 and to evaluate whether airborne-particle abrasion and acid etching is an appropriate surface treatment for Ti alloy gr 23.

MATERIAL AND METHODS

Implant groups (n=3) were as follows: TG4AO, cp Ti gr 4, treated with anodic oxidation (3.5×8 mm) (NobelReplace Conical; Nobel Biocare); TG23AE, Ti gr 23 (TiAlV ELI) airborne-particle abraded-and-etched (3.9×8 mm) (V3; MIS); and TG4AE, cp Ti gr 4, airborne-particle abraded and etched (3.3×8 mm) (BL; Institut Straumann AG). Surface roughness, surface topography, and elemental and surface composition were investigated with optical profilometry, scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. The presence and size of Ti hydride (TiH) needles were determined on metallographic sections. Depth profiling was obtained by time-of-flight secondary ion mass spectrometry (ToF-SIMS) to determine possible enrichment of an alloying element at the implant surface.

RESULTS

The mean arithmetic deviation roughness (S_a), of TG4AO was 0.80 μm. The S_a of TG4AO was 1.22 μm, and the S_a of TG4AO was 1.59 μm. The difference between the groups was significant (P<.001). TG23AE and TG4AE displayed a macrotexture and microtexture with pores; TG4AO showed a 3-to 12-μm canyon-like structure. The surface and subsurface compositions were as follows: for TG4AO, αTi and phosphorus-rich anatase; for TG23AE, α-Ti matrix with β-Ti grains; and for TG4AE, α-Ti and δ-TiH_2-x. TiH needles were found only on TG4AE; the Ti oxide layer of TG4AO was rough, 3-to 16-μm thick, and porous. The time-of-flight secondary ion mass spectrometry (ToF SIMS) concentration profile of TG23AE did not show enrichment of any alloying element.

CONCLUSIONS

The roughness, topography, and composition of the surfaces were different for all implants tested. Airborne-particle abrasion and subsequent etching was an appropriate treatment for Ti gr 23 alloy implants.

Immediate implant in the posterior region combined with alveolar ridge preservation and sealing socket abutment: A retrospective 3D radiographic analysis

BACKGROUND

Customized sealing socket abutment (SSA) has been claimed to optimize the peri-implant hard and soft tissues in type 1 implant placement. However, the evidence to claim the benefits of this technique over the use a conventional healing abutment remains weak.

PURPOSE

The aim of this retrospective study was to provide a 3D-radiographic evaluation of hard tissues changes following immediate implant placement in molar sites combined to ARP technique and installation of SSA.

MATERIALS AND METHODS

Baseline and follow-up (FU) CBCTs (from 1 to 5 years) of 26 patients were collected and included in the study. Baseline and FU CBCTs were superimposed and horizontal and vertical bone changes were assessed.

RESULTS

A total of 26 patients and 27 implants were included. Horizontal bone remodeling was not significant in any of the measured areas except in the most cervical level, where a mean bone remodeling of 0.73 mm was found. Proximal and buccal vertical bone changes were not significant.

CONCLUSIONS

Within the limits of a retrospective study, dimensional alveolar ridge changes 1 to 5 years after immediate implant placement in molar sites with simultaneous ARP technique and installation of SSA seem to be very limited.

Hard tissue volumetric and soft tissue contour linear changes at implants with different surface characteristics after experimentally induced peri-implantitis: an experimental in vivo investigation

OBJECTIVE

To evaluate the hard tissue volumetric and soft tissue contour linear changes in implants with two different implant surface characteristics after a ligature-induced peri-implantitis.

MATERIAL AND METHODS

In eight beagle dogs, implants with the same size and diameter but distinct surface characteristics were placed in the healed mandibular sites. Test implants had an external monolayer of multi-phosphonate molecules (B+), while control implants were identical but without the phosphonate-rich surface. Once the implants were osseointegrated, oral hygiene was interrupted and peri-implantitis was induced by placing subgingival ligatures. After 16 weeks, the ligatures were removed and peri-implantitis progressed spontaneously. Bone to implant contact (BIC) and bone loss (BL) were assessed three-dimensionally with Micro-Ct (μCT). Dental casts were optically scanned and the obtained digitalized standard tessellation language (STL) images were used to assess the soft tissue vertical and horizontal contour linear changes.

RESULTS

Reduction of the three-dimensional BIC percentage during the induction and progression phases of the experimental peri-implantitis was similar for both the experimental and control implants, without statistically significant differences between them. Soft tissue analysis revealed for both implant groups an increase in horizontal dimension after the induction of peri-implantitis, followed by a decrease after the spontaneous progression period. In the vertical dimension, a soft tissue dehiscence was observed in both groups, being more pronounced at the buccal aspect.

CONCLUSIONS

The added phosphonate-rich surface did not provide a more resistant environment against experimental peri-implantitis, when assessed by the changes in bone volume and soft tissue contours.

CLINICAL RELEVANCE

Ligature-induced peri-implantitis is a validated model to study the tissue changes occurring during peri-implantitis. It was hypothesized that a stronger osseointegration mediated by the chemical bond of a phosphonate-rich implant surface would develop an environment more resistant to the inflammatory changes occurring after experimental peri-implantitis. These results, however, indicate that the hard and soft tissue destructive changes occurring at both the induction and progression phases of experimental peri-implantitis were not influenced by the quality of osseointegration.

The effect of immediate implant placement on alveolar ridge preservation compared to spontaneous healing after tooth extraction: Soft tissue findings from a randomized controlled clinical trial

AIM

To compare soft tissue dimensional changes and relative differences in soft and hard tissue volumes 4 months after single-tooth extraction and three different treatment modalities: spontaneous healing (SH) and alveolar ridge preservation by means of a deproteinized bovine bone mineral and a collagen matrix, with (IMPL/DBBM/CM) or without (DBBM/CM) immediate implant placement.

MATERIALS AND METHODS

STL files from study casts obtained at baseline and after 4 months were matched to calculate buccal soft tissue linear and volumetric changes. DICOM files from CBCTs were superimposed to STL files allowing the evaluation of soft tissue thickness at baseline and 4 months.

RESULTS

Mean horizontal reduction accounted for 1.46 ± 0.20 (SH), 0.85 ± 0.38 (DBBM-CM) and 0.84 ± 0.30 IMPL/DBBM-CM, with no statistical differences. Soft tissue thickness had a significant mean increase of 0.95 for SH group, compared to a non-significant mean decrease for DBBM-CM (0.20) and IMPL/DBBM-CM groups (0.07).

CONCLUSION

A preservation technique with DBBM-CM, with or without immediate implant placement, did not reduce the horizontal linear and volumetric changes at the buccal soft tissue profile significantly at 4 months after tooth extraction when compared to spontaneous healing. This is due to a significant increase in soft tissue thickness in spontaneously healing sites.

Radiological Outcomes of Bone-Level and Tissue-Level Dental Implants: Systematic Review

Background: to assess the radiological marginal bone loss between bone-level or tissue-level dental implants through a systematic review of literature until September 2019. Methods: MEDLINE, Embase and other database were searched by two independent authors including only English articles. Results: The search provided 1028 records and, after removing the duplicates through titles and abstracts screening, 45 full-text articles were assessed for eligibility. For qualitative analysis 20 articles were included, 17 articles of them for quantitative analysis counting a total of 1161 patients (mean age 54.4 years) and 2933 implants, 1427 inserted at Tissue-level (TL) and 1506 inserted at Bone-level (BL). The survival rate and the success rate were more than 90%, except for 2 studies with a success rate of 88% and 86.2%. No studies reported any differences between groups in term of success and survival rates. Three studies showed that BL-implants had statistically less marginal bone loss (p < 0.05). Only one study reported statistically less marginal bone loss in TL-implants (p < 0.05). Conclusion: In the most part of the studies, differences between implant types in marginal bone loss were not statistically significant after a variable period of follow-up ranged between 1 and 5 years.

Hard and soft tissue changes after guided bone regeneration using two different barrier membranes: an experimental in vivo investigation

OBJECTIVE

To assess the contour and volumetric changes of hard and soft tissues after guided bone regeneration (GBR) using two types of barrier membranes together with a xenogeneic bone substitute in dehiscence-type defects around dental implants.

MATERIAL AND METHODS

In 8 Beagle dogs, after tooth extraction, two-wall chronified bone defects were developed. Then, implants were placed with a buccal dehiscence defect that was treated with GBR using randomly: (i) deproteinized bovine bone mineral (DBBM) covered by a synthetic polylactic membrane (test group), (ii) DBBM plus a porcine natural collagen membrane (positive control) and (iii) defect only covered by the synthetic membrane (negative control group). Outcomes were evaluated at 4 and 12 weeks. Micro-CT was used to evaluate the hard tissue volumetric changes and STL files from digitized cast models were used to measure the soft tissues contour linear changes.

RESULTS

Test and positive control groups were superior in terms of volume gain and contour changes when compared with the negative control. Soft tissue changes showed at 4 weeks statistically significant superiority for test and positive control groups compared with negative control. After 12 weeks, the results were superior for test and positive control groups but not statistically significant, although, with a lesser magnitude, the negative control group exhibited gains in both, soft and hard tissues.

CONCLUSIONS

Both types of membranes (collagen and synthetic) attained similar outcomes, in terms of hard tissue volume gain and soft tissue contours when used in combination with DBBM CLINICAL RELEVANCE: Synthetic membranes were a valid alternative to the "gold standard" natural collagen membrane for treating dehiscence-type defects around dental implants when used with a xenogeneic bone substitute scaffold.

Alveolar crest contour changes after guided bone regeneration using different biomaterials: an experimental in vivo investigation

OBJECTIVE

To evaluate the changes in alveolar contour after guided bone regeneration (GBR) with two different combinations of biomaterials in dehiscence defects around implants.

MATERIAL AND METHODS

Chronic alveolar ridge defects were created bilaterally in the mandible of eight Beagle dogs. Once implants were placed, three treatment groups were randomly allocated to each peri-implant dehiscence defect: (i) test group received a bone substitute composed of hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) covered by a cross-linked collagen membrane, (ii) positive control group with placement of deproteinized bovine bone mineral (DBBM) plus a porcine natural collagen membrane, and (iii) a negative control with no treatment. Two healing periods (8 and 16 weeks) were evaluated. Dental casts were optically scanned, the obtained files were uploaded into an image analysis software and superimposed to evaluate the linear changes.

RESULTS

In both healing periods, the gains in linear contours were higher in the test group and at the intermediate level (3 mm below the gingival margin). While at 8 weeks, no significant differences were found between the groups; at 16 weeks, the test and positive control groups demonstrated significant gains in contour compared with negative control.

CONCLUSIONS

GBR using different biomaterials significantly increased the buccal contours of the alveolar crest when used at dehiscence defects around dental implants.

CLINICAL RELEVANCE

Particulate highly porous synthetic bone substitute and a cross-linked collagen membrane demonstrated similar outcomes in terms of contour augmentation when compared to bovine xenograft (DBBM) and a collagen membrane.

Section Plane Effects on Morphometric Values of Microcomputed Tomography

Objectives

Histomorphometry is the established gold standard for inspection of trabecular microstructures in biomaterial research. However, microcomputed tomography can provide images from the perspective of various section planes. The aim of the present study was to evaluate the effects of different section planes, which may cause bias in two-dimensional morphometry, on the morphometric values of microcomputed tomography.

Methods

A socket preservation technique was performed on the extracted premolar area of 4 beagle dogs. After an 8-week healing period, a total of 16 specimens were obtained and analyzed with conventional histomorphometry and microtomographic morphometry. Using the original images of the histologic specimens for comparison, the most similar tomographic image was selected by trial and error. Then, the section plane was then moved with ±79 μm parallel offsets and rotated ±10° around the center from the occlusal view. The images were compared in terms of bone, graft, and noncalcified area, and the concordance correlation coefficient (CCC) was calculated.

Results

There was a high CCC in the comparison between histomorphometric images and the most similar microtomographic images. However, the CCC value was low in the comparisons with both parallel movement and rotation. Our results demonstrate that the sectioning plane has a significant effect on measurements.

Conclusion

Two-dimensional morphometric values for biomaterial research should be interpreted with caution, and the simultaneous use of complementary 3-dimensional tools is recommended.

A novel methodological approach using superimposed Micro-CT and STL images to analyze hard and soft tissue volume in immediate and delayed implants with different cervical designs

OBJECTIVES

To study the hard and soft tissue volume after placing immediate (IMI) or delayed implants (DLI) with a triangular coronal macro-design (Test/T) or a conventional cylindrical design (Control/C).

MATERIAL AND METHODS

T/C implants were inserted in healed ridges or in fresh extraction sockets of eight beagle dogs. Biopsies were processed for Micro-CT analysis and dental stone casts were optically scanned to obtain STL files revealing the soft tissue contours at 12 weeks. Image analysis software was utilized to match common landmarks superimposing the two sets of data. Three distinct volumes were calculated; buccal bone volume (B-BV), soft tissue volume below the implant shoulder (EC-STV), and the soft tissue volume above the implant shoulder (SC-STV). Using linear measurements, the soft tissue height (STH), the mucosal thickness (MT-IS), and the distance from the implant shoulder to the bone crest (I-BC) were assessed in the digital images and in conventional histology to assess the concordance, reproducibility, and reliability.

RESULTS

There were no significant differences between test and control implants regarding the buccal bone volume, although test implants had greater B-BV in all locations except for PM2. The soft tissue volume was similar at T/C implants. The surgical approach influenced the distribution of the total tissue volume. In the IMI, a low position of the bone crest was correlated with low values of B-BV, SC-STV, MT-IS, and STH. Linear measurements showed a high correlation between the histology and digital measurements and high inter and intra examiner agreement.

CONCLUSION

The superimposition of Micro-CT/STL allowed the analysis of soft and hard tissue volumes. Reduction of the implant buccal aspect resulted in nonsignificant higher bone volume although similar soft tissue volume while the surgical approach influenced soft tissue response.

The effect of low-magnitude high-frequency loading on peri-implant bone healing and implant osseointegration in Beagle dogs

PURPOSE

Low-magnitude, high-frequency (LMHF) loading plays an important role in bone healing. The present study aimed to evaluate the effect of LMHF loading applied directly to titanium dental implants on peri-implant bone healing and implant osseointegration.

METHODS

The mandibular premolars and molars were extracted from six male Beagle dogs. Three months post-extraction, each of the six dogs had three titanium implants (Aadva Standard Implant Narrow, Φ3.3×8mm) inserted into the mandibular premolar and molar area (three implants per side). In each animal, one side was randomly selected to undergo daily LMHF loading (treatment group), while the other side had no further intervention (control). The loading was applied directly to the implant abutment using an individual jig and a custom-made loading device (8μm, 100Hz). The implant stability quotient (ISQ) was tested every week. Three dogs were euthanized after 2 weeks, and three were euthanized after 8 weeks. Tissue samples were fixed and stained for micro-computed tomography (micro-CT) and histomorphometric analyses. Data were analyzed statistically, with significance set at p<0.05.

RESULTS

The treatment group had significantly increased peri-implant bone volume relative to tissue volume in region of interest 2 (100-500μm) compared with the control group after 2 weeks of loading (p<0.05); however, there was no significant difference between groups after 8 weeks. The ISQ value and the micro-CT results did not differ between groups during the study period.

CONCLUSIONS

LMHF loading positively influenced peri-implant bone healing in the early healing period.

Effect of Different Morphology of Titanium Surface on the Bone Healing in Defects Filled Only with Blood Clot: A New Animal Study Design

Background

The objective of the present histologic animal study was to analyze whether roughness of the titanium surface can influence and/or stimulate the bone growth in defects filled with the blood using a rabbit tibia model.

Materials and Methods

Forty sets (implant and abutment), dental implant (3.5 mm in diameter and 7 mm in length) plus healing abutment (2.5 mm in diameter), were inserted in the tibiae of 10 rabbits. Moreover, twenty titanium discs were prepared. The abutment and discs were treated by 4 different methods and divided into 4 groups: (group A) machined abutments (smooth); (group B) double acid etching treatment; (group C) treatment with blasting with particles of aluminum oxide blasted plus acid conditioning; (group D) treatment with thorough blasting with particles of titanium oxide plus acid conditioning. The discs were used to characterize the surfaces by a profilometer and scanning electronic microscopy.

Results

After 8 weeks, the new bone formation around the sets of the samples was analyzed qualitatively and quantitatively in relation to bone height from the base of the implant and presence of osteocytes. Group C (1.50±0.20 mm) and group D (1.62±0.18 mm) showed bone growth on the abutment with higher values compared to group A (0.94±0.30 mm) and group B (1.19±0.23 mm), with significant difference between the groups (P < 0.05). In addition, osteocyte presence was higher in groups with surface treatment related to machined (P < 0.05).

Conclusions

Within the limitations of the present study, it was possible to observe that there is a direct relationship between the roughness present on the titanium surface and the stimulus for bone formation, since the presence of larger amounts of osteocytes on SLA surfaces evidenced this fact. Furthermore, the increased formation of bone tissue in height demonstrates that there is an important difference between the physical and chemical methods used for surface treatment.