Screening of candidate biomaterials for alveolar augmentation using a critical-size rat calvaria defect model

Dynamic culturing of large cell-loaded PCL/gelatin methacryloyl scaffolds for bone critical size defect repair

Due to the limited ability to self-repair, the regeneration of bone critical-sized defects (CSD) is a significant challenge. Bone tissue engineering scaffolds are considered promising candidates for CSD repair, but low cell infiltration efficiency and a lack of nutrients greatly restrict bone regeneration abilities. Herein, we developed a dynamic culturing of large biomimetic bone scaffolds, PCL/GelMA@cells that combining 3D printed polycaprolactone (PCL) multi-channel cylinder with gelatin methacryloyl (GelMA) encapsulated with bone marrow mesenchymal stem cells (BMSCs) and rat aortic endothelial cells (RAECs). A cell dynamic culture system was fabricated to simulate the dynamic microenvironment. Compared to static culturing, dynamic culturing proved to enhance the nutrient exchange within the large scaffold to promote the cells infiltration, growth, proliferation and induce osteogenic and angiogenic differentiation. Furthermore, a rat cranial CSD (D = 10 mm) repair model verified the accelerated vascular ingrowth and new bone formation with the implantation of dynamic culturing of PCL/GelMA@cells scaffold (∼10 times higher than Blank group), indicating the great potential of dynamical culturing of scaffolds for bone repair. In summary, the results highlight the significant advantages of the dynamical culturing of cell-loaded scaffolds for bone regeneration, offering a promising strategy for addressing critical size bone defects.

Histological study of the effect of different hydration times of bone allograft and xenograft particles on the rate of bone formation in critical size defects in the rat calvarium

PURPOSE

The aim of this study was to investigate the effect of different bone graft hydration times on bone regeneration.

METHODS

Five-mm defects were created on either side of the sagittal plane in the calvaria of 40 rats. In each rat, the right and left defects were filled with allograft (Cenobone®) and xenograft (Cerabone®) particles, respectively, based on the grouping that was randomly assigned in the study (no hydration of bone graft, 2-minute saline hydration, 10-minute saline hydration, 30-minute saline hydration, and 2-minute blood hydration). Histological and histomorphometrical analyses were performed eight weeks after surgery. The amount of new bone formation, remaining graft, and connective tissue were analyzed using the general linear model (GLM) and Bonferroni test.

RESULTS

There was no significant difference regarding the mean of new bone, remaining graft, and connective tissue between the xenograft samples in different hydration groups. In the allograft groups, the mean new bone formation of the no-hydration and 2-minute saline-hydrated groups was significantly lower than 30-minute saline-hydrated and blood hydrated groups (P = 0.03 and P = 0.03, respectively). Regarding the variable of the remaining graft particles, the results were almost similar.

CONCLUSIONS

The results of this study showed that, the method of bone graft hydration before it is used in treating bone lesions affects osteogenesis. Especially in the case of allograft, rehydration before usage at least for 10 min is recommended.

Histomorphometric Assessment of Non-Decalcified Plastic-Embedded Specimens for Evaluation of Bone Regeneration Using Bone Substitute Materials-A Systematic Review

With the implementation of bone substitute materials, regeneration strategies have inevitably evolved over the years. Histomorphometry is the optimal means of quantitative evaluation of bone structure and morphology. This systematic review focuses on determining study models, staining methods and histomorphometric parameters used for bone regeneration research on non-decalcified plastic-embedded specimens over the last 10 years. After being subjected to the inclusion and exclusion criteria, 118 studies were included in this review. The results establish the most commonly selected animal model is rat, followed by rabbit, sheep and dog. Strong preference for staining samples with toluidine blue was noted. With regard to histomorphometric parameters, terms related to bone were most frequently assessed, amounting to almost half of recorded parameters. New bone formation was the main descriptor of this category. Residual bone graft and non-bone tissue parameters were also often evaluated. With regard to dynamic histomorphometry, mineral apposition rate (MAR) was the parameter of choice for most researchers, with calcein green being the preferred dye for fluorochrome labelling. An overview of the contemporary literature, as well as weaknesses in the current research protocols have been discussed.

Fn-HMGB1 Adsorption Behavior Initiates Early Immune Recognition and Subsequent Osteoinduction of Biomaterials

Implantable biomaterials are widely used in bone tissue engineering, but little is still known about how they initiate early immune recognition and the initial dynamics. Herein, the early immune recognition and subsequent osteoinduction of biphasic calcium phosphate (BCP) after implantation to the protein adsorption behavior is attributed. By liquid chromatography tandem mass spectrometry (LC-MS/MS) analysis, the biomaterial-related molecular patterns (BAMPs) formed after BCP implantation are mapped, dominated by the highly expressed extracellular matrix protein fibronectin (Fn) and the high mobility group box 1 (HMGB1). Molecular dynamics simulations show that Fn has the ability to bind more readily to the BCP surface than HMGB1. The preferential binding of Fn provides a higher adsorption energy for HMGB1. Furthermore, multiple hydrogen bonding sites between HMGB1 and Fn are demonstrated using a molecular docking approach. Ultimately, the formation of BAMPs through HMGB1 antagonist glycyrrhizic acid (GA), resulting in impaired immune recognition of myeloid differentiation factor 88 (MYD88) mediated dendritic cells (DCs) and macrophages (Mφs), as well as failed osteoinduction processes is obstructed. This study introduces a mechanism for early immune recognition of implant materials based on protein adsorption, providing perspectives for future design and application of tissue engineering materials.

A Review of Advanced Biomaterials and Cells for the Production of Bone Organoid

Rapid advancements in traditional bone tissue engineering have led to innovation in bone repair models and the resolution of insurmountable clinical issues like graft scarcity. The pathophysiological process of treating bone disease, however, is a multidimensional and multimodal regenerative regulatory mechanism that includes numerous immune, inflammatory, or metabolic responses related to the graft or the organism itself. Based on a 3D in vitro cell culture system that is remarkably identical to the body's bone tissue, the bone organoid is a biomimicking bone organ environment. It can accurately mimic the actual repair and regeneration condition in vivo because it shares the same physiological function, structure, morphology, and metabolic process as endogenous bone tissue. As a disruptive regenerative medicine technology, it has wide application prospects in the fields of organ development, gene editing, disease modeling, and precision therapy. Herein, the development process and physiological basis of different cell-based bone organoids are reviewed, the current status of the application of different materials, cells, and construction methods for building bone organoids is described, and the prospects and challenges for the development of bone organoids in future medical fields is discussed.

Screening of Hydroxyapatite Biomaterials for Alveolar Augmentation Using a Rat Calvaria Critical-Size Defect Model: Bone Formation/Maturation and Biomaterials Resolution

BACKGROUND

Natural (bovine-/equine-/porcine-derived) or synthetic hydroxyapatite (HA) biomaterials appear to be the preferred technologies among clinicians for bone augmentation procedures in preparation for implant dentistry. The aim of this study was to screen candidate HA biomaterials intended for alveolar ridge augmentation relative to their potential to support local bone formation/maturation and to assess biomaterial resorption using a routine critical-size rat calvaria defect model.

METHODS

Eighty adult male Sprague Dawley outbred rats obtained from a approved-breeder, randomized into groups of ten, were used. The calvaria defects (ø8 mm) either received sham surgery (empty control), Bio-Oss (bovine HA/reference control), or candidate biomaterials including bovine HA (Cerabone, DirectOss, 403Z013), and bovine (403Z014) or synthetic HA/ß-TCP (Reprobone, Ceraball) constructs. An 8 wk healing interval was used to capture the biomaterials' resolution.

RESULTS

All biomaterials displayed biocompatibility. Strict HA biomaterials showed limited, if any, signs of biodegradation/resorption, with the biomaterial area fraction ranging from 22% to 42%. Synthetic HA/ß-TCP constructs showed limited evidence of biodegradation/erosion (biomaterial area fraction ≈30%). Mean linear defect closure in the sham-surgery control approximated 40%. Mean linear defect closure for the Bio-Oss reference control approximated 18% compared with 15-35% for the candidate biomaterials without significant differences between the controls and candidate biomaterials.

CONCLUSIONS

None of the candidate HA biomaterials supported local bone formation/maturation beyond the native regenerative potential of this rodent model, pointing to their limitations for regenerative procedures. Biocompatibility and biomaterial dimensional stability could suggest their potential utility as long-term defect fillers.

Biodegradation of HA and β-TCP Ceramics Regulated by T-Cells

Biodegradability is one of the most important properties of implantable bone biomaterials, which is directly related to material bioactivity and the osteogenic effect. How foreign body giant cells (FBGC) involved in the biodegradation of bone biomaterials are regulated by the immune system is poorly understood. Hence, this study found that β-tricalcium phosphate (β-TCP) induced more FBGCs formation in the microenvironment (p = 0.0061) accompanied by more TNFα (p = 0.0014), IFNγ (p = 0.0024), and T-cells (p = 0.0029) than hydroxyapatite (HA), resulting in better biodegradability. The final use of T-cell depletion in mice confirmed that T-cell-mediated immune responses play a decisive role in the formation of FBGCs and promote bioceramic biodegradation. This study reveals the biological mechanism of in vivo biodegradation of implantable bone tissue engineering materials from the perspective of material-immune system interaction, which complements the mechanism of T-cells’ adaptive immunity in bone immune regulation and can be used as a theoretical basis for rational optimization of implantable material properties.

A Randomized Controlled Trial of Guided Bone Regeneration for Peri-Implant Dehiscence Defects with Two Anorganic Bovine Bone Materials Covered by Titanium Meshes

The aim of this study is to compare two low-temperature sintered anorganic bovine bone materials (ABBMs), Bio-Oss (Geistlich, Wolhusen, Switzerland) and A-Oss (Osstem, Seoul, Korea), for GBR in dehiscence defects. A single implant was placed simultaneously with GBR in the buccal or bucco-proximal osseous defect by double-layering of inner allograft and outer ABBM, covered by a preformed ultrafine titanium mesh and an absorbable collagen membrane. Grafted volume changes were evaluated by cone-beam computed tomography, taken preoperatively (T0), immediately after implant surgery (T1), after re-entry surgery (T2), and after delivery of the final restoration (T3). The density of the regenerated bone was assessed by measuring the probing depth on the buccal mid-center of the mesh after removing the mesh at T2. Postoperative sequelae were also recorded. Grafted volume shrinkage of 46.0% (0.78 ± 0.37 cc) and 40.8% (0.79 ± 0.33 cc) in the Bio-Oss group (8 patients) and A-Oss group (8 patients), respectively, was observed at T3 (p < 0.001). There were no significant differences in grafted volume changes according to time periods or bone density between the two groups. Despite postoperative mesh exposure (3 patients), premature removal of these exposed meshes and additional grafting was not necessary, and all implants were functional over the 1-year follow-up period. Both ABBMs with titanium meshes showed no significant difference in the quantity and density of the regenerated bone after GBR for peri-implant defects.

Local effect of simvastatin combined with different osteoconductive biomaterials and collagen sponge on new bone formation in critical defects in rat calvaria

Purpose

To evaluate the local effect of simvastatin (SVT) combined with deproteinized bovine bone (DBB) with hydroxyapatite/β-tricalcium phosphate biphasic ceramics (HA/TCP) and with collagen sponge (CS) on bone repair in critical size defects (CSDs) in rat calvaria.

Methods

Forty-two 5-mm diameter CSDs were made bilaterally in the calvaria of 18 rats. The animals were allocated according to the type of biomaterial and associations used to fill the CSD. After 8 weeks, the animals were euthanized, and their calvaria were evaluated for repaired tissue composition using histologic and histometric analyses.

Results

In the histometric analysis, the use of SVT showed to increase bone formation in the CSDs when combined with all the bone substitutes tested in this study (p<0.05). Greater bone formation was observed in the groups with SVT compared to the groups without SVT.

Conclusions

The use of SVT without the need for a vehicle and combined with a commercially available biomaterial may be a cheaper way to potentiate the formation of bone tissue without the need to produce new biomaterials. Therefore, SVT combined with DBB induced significantly greater new bone formation than did the other treatments.