Three-Year Clinical Evaluation of a Silorane Composite Resin

A Systematic Review and Meta-Analysis of the Success of Resin Composite Restorations

Aim:

This review examines the studies on resin composites within the past decade and evaluates the materials’ application methods and success through Fédération Dentaire Internationale (FDI) scores.

Materials and Methods:

Search results from three databases (a total of 3295 studies) were transferred to Mendeley Desktop (Mendeley, London, UK) software and deduplicated (2638 studies). Eight studies were included in this meta-analysis after scanning the title, abstract, and full-text screening. Risk of bias analysis was performed using the Cochrane Handbook tool. Shapiro–Wilk, Kolmogorov–Smirnov, Kruskal–Wallis, and post hoc Tamhane’s T2 were used for statistical analysis.

Results:

Conventional composite’s surface staining FDI score was higher than flowable and silorane composites (no difference between these two). Also, conventional composite has the highest score in terms of staining. Conventional composite + two-step self-etch adhesive and bulk fill composite + two-step self-etch adhesive have lower FDI scores in marginal staining. In noncarious cervical lesions (NCCL), conventional composite + two-step total-etch adhesive has a higher score than flowable composite + two-step self-etch adhesive. Flowable composite + two-step self-etch adhesive and conventional composite + single-step self-etch adhesive have the highest FDI scores for marginal adaptation (no statistical difference between them). Conventional composite + two-step self-etch adhesive and bulk fill composite + two-step self-etch have the lowest scores (no statistical difference between them). For recurrence of caries, all groups have Score 1, the best score, and there is no significant difference between them.

Conclusions:

Each restorative material and adhesive system has different advantages, and the practitioner must choose the most appropriate.

Low-Shrinkage Resin Matrices in Restorative Dentistry-Narrative Review

Dimethacrylate-based resin composites restorations have become widely-used intraoral materials in daily dental practice. The increasing use of composites has greatly enhanced modern preventive and conservative dentistry. They have many superior features, especially esthetic properties, bondability, and elimination of mercury and galvanic currents. However, polymeric materials are highly susceptible to polymerization shrinkage and stresses that lead to microleakage, biofilm formation, secondary caries, and restoration loss. Several techniques have been investigated to minimize the side effects of these shrinkage stresses. The primary approach is through fabrications and modification of the resin matrices. Therefore, this review article focuses on the methods for testing the shrinkage, as well as formulations of resinous matrices available to reduce polymerization shrinkage and its associated stress. Furthermore, this article reviews recent cutting-edge developments on bioactive low-shrinkage-stress nanocomposites to effectively inhibit the growth and activities of cariogenic pathogens and enhance the remineralization process.

Compliance of randomized controlled trials in posterior restorations with the CONSORT statement: a systematic review of methodology

OBJECTIVES

This study aims to investigate the compliance of randomized controlled trials (RCTs) in posterior restorations with the Consolidated Standards of Reporting Trials Statement (CONSORT) statement and to analyze the risk of bias (RoB) of these studies.

METHODS

A systematic search was performed in PubMed, Scopus, Web of Science, LILACS/BBO, and Cochrane Library. Only RCTs published in peer-reviewed journals were included. The compliance with the CONSORT was evaluated in a 0-2 scale where 0 = no description, 1 = poor description and 2 = adequate description. Descriptive analyses of the CONSORT mean score by journal, country, and RoB were performed. The RoB in RCTs was evaluated by using the Cochrane Collaboration's tool version 1.0.

RESULTS

A total of 15,476 studies were identified after duplicates removal. O only 202 meet the eligibility criteria, among which 31 were follow-up studies. Concerning the overall RoB, only 29 out of 171 were classified as low risk of bias. The overall mean CONSORT score was 19 ± 5.4 points, which means compliance of approximately 59%. Significant differences among countries, publication period, and RoB were observed (p < 0.001). The journal's impact factor was not correlated with the overall CONSORT score (p = 0.36).

CONCLUSIONS

The adherence of RCTs conducted in posterior restorations to the CONSORT Statement is still low. In addition, most studies were classified as at unclear risk of bias. These results call up an urgent need for improvement.

CLINICAL RELEVANCE

Most RCTs conducted in posterior teeth have poor reporting and are mainly classified as having an unclear risk of bias.

Nanofilled/nanohybrid and hybrid resin-based composite in patients with direct restorations in posterior teeth: A systematic review and meta-analysis

OBJECTIVE

A systematic review and a meta-analysis were performed to answer the following research question: Are there differences in the color match and surface texture of nanofilled/nanohybrid and hybrid composite in patients with direct posterior restorations?

DATA

Randomized clinical trials that compared nanofilled/nanohybrid and hybrid composite in direct restoration in posterior teeth were included. For the analysis of the bias the risk of bias tool (RoB) was used. Meta-analyses of different pairs (nanofilled vs. hybrid and nanohybrid vs. hybrid composite) were conducted for surface texture and color match and other secondary outcomes at different follow-ups, using a random effects model. Heterogeneity was assessed with the Cochran Q test and I² statistics. GRADE was used to assess the quality of the evidence.

SOURCES

A search was performed in PubMed, Scopus, Web of Science, LILACS, BBO, Cochrane Library and SIGLE, without restrictions. IADR abstracts (2001-2019), unpublished and ongoing trials registries, dissertations and theses were also searched.

STUDY SELECTION

28 studies remained. No study was considered to be at low RoB; four studies were judged to have high RoB, and the remaining were judged to have unclear RoB.

RESULTS

For the primary and secondary outcomes variables no significant differences were detected between nanofilled/nanohybrid restorations and hybrid composite restorations in any of the study follow-ups (p > 0.08). The body of evidence for surface texture and color match was classified as moderate or low.

CONCLUSION

No evidence of difference was found between nanofilled/nanohybrid and hybrid composite in any of the clinical parameters evaluated.

The Silorane-based Resin Composites: A Review

This article aims to review the research done on the silorane-based resin composites (SBRC) regarding polymerization shrinkage and contraction stresses and their ability to improve the shortcomings of the methacrylate-based resin composites (MRBC). Special attention is given to their physical and mechanical properties, bond strength, marginal adaptation, and cusp deflection. The clinical significance of this material is critically appraised with a focus on the ability of SBRC to strengthen the tooth structure as a direct restorative material. A search of English peer-reviewed dental literature (2003-2015) from PubMed and MEDLINE databases was conducted with the terms "low shrinkage" and "silorane composites." The list was screened, and 70 articles that were relevant to the objectives of this work were included.

Meta-analysis of the clinical behavior of posterior direct resin restorations: Low polymerization shrinkage resin in comparison to methacrylate composite resin

Polymerization shrinkage of resin composite can compromise the longevity of restorations. To minimize this problem, the monomeric composition of composites have been modified. The objective of this study was to conduct a meta-analysis to assess the clinical behavior of restorations performed with low polymerization shrinkage resin composite in comparison with traditional methacrylates-based resin composite. This systematic review was registered at Prospero data system (CRD42015023940). Studies were searched in the electronic databases PubMed, Web of Science, Scopus, Lilacs and EMBASE according to a predefined search strategy. The inclusion criteria were as follow: (1) randomized controlled clinical trials with at least six months of follow-up; (2) studies investigating composites with monomers designed to reduce polymerization shrinkage; (3) studies conducted with class I or II restorations in the permanent dentition; and (4) studies that assessed at least one of the following criteria: marginal integrity/adaptation, marginal discoloration, recurent caries, retention of composite restorations, and postoperative sensitivity. Two independent reviewers analyzed the articles to determine inclusion and risk of bias. The search conducted in the databases resulted in a total of 14,217 studies. After reviewing the references and citations, 21 articles remained. The longest clinical follow-up time was 60 months. The meta-analysis of the data in the included studies demonstrated that only one variable (marginal adaptation after 12 months) showed statistically significant outcomes, in which methacrylates-based composites presented significantly better results than resin composites containing modified monomers. The good level of the scientific evidence as well as the overall low risk of bias of the included studies indicate that composites with silorane, ormocer or bulk-fill type modified monomers have a clinical performance similar to conventional resin composites.

The use of FDI criteria in clinical trials on direct dental restorations: A scoping review

OBJECTIVES

A scoping review was conducted to explore the use of FDI criteria 10 years after their introduction. The first aim was to compare the amount of studies using the FDI and/or the modified USPHS criteria. The second aim was to analyse the use of the FDI criteria in clinical trials evaluating direct dental restorations.

DATA

Listing of studies using FDI and/or USPHS criteria per year since 2007. Clinical studies related to the assessment of direct restorations using FDI criteria.

SOURCE

Two systematic searches - regarding the use of FDI and modified USPHS criteria - were carried out on Medline/Pubmed in order to identify the studies published between 2007 and 2017. Authors of the included articles were contacted to clarify their choice of FDI criteria in their studies. ClinicalTrials.gov database was also queried for the on-going studies that use FDI and modified USPHS criteria.

STUDY SELECTION

In the first review, all the clinical trials (randomized/non-randomized, controlled, prospective/retrospective studies) that used FDI criteria to evaluate direct restorations on primary or permanent teeth were included.

CONCLUSIONS

16.3% of the studies used FDI criteria. The percentage of studies using them increased from 4.5% in 2010 to 50.0% in 2016. In average, 8.5 FDI criteria were used. The most employed criteria were: marginal adaptation (96.7%), staining (90.0%), fracture of material and retention (90.0%), recurrence of caries/erosion/abfraction (90.0%), post-operative sensitivity/tooth vitality (86.7%) and surface luster (60.0%). In addition, among the 27 on-going studies from ClinicalTrials.gov database, 51.9% use FDI criteria (including 87.5% with an open recruitment status).

CLINICAL SIGNIFICANCE

FDI criteria were reported as practical (various and freely selectable), relevant (sensitive as well as appropriate to current restorative materials and clinical studies design), standardized (making comparisons between investigations easier). Investigators should go on using them for a better standardization of their clinical judgment, allowing comparisons with other studies.

Polymerization shrinkage stress of composite resins and resin cements - What do we need to know?

Polymerization shrinkage stress of resin-based materials have been related to several unwanted clinical consequences, such as enamel crack propagation, cusp deflection, marginal and internal gaps, and decreased bond strength. Despite the absence of strong evidence relating polymerization shrinkage to secondary caries or fracture of posterior teeth, shrinkage stress has been associated with post-operative sensitivity and marginal stain. The latter is often erroneously used as a criterion for replacement of composite restorations. Therefore, an indirect correlation can emerge between shrinkage stress and the longevity of composite restorations or resin-bonded ceramic restorations. The relationship between shrinkage and stress can be best studied in laboratory experiments and a combination of various methodologies. The objective of this review article is to discuss the concept and consequences of polymerization shrinkage and shrinkage stress of composite resins and resin cements. Literature relating to polymerization shrinkage and shrinkage stress generation, research methodologies, and contributing factors are selected and reviewed. Clinical techniques that could reduce shrinkage stress and new developments on low-shrink dental materials are also discussed.

Clinical Evaluation of a Silorane- and a Methacrylate-Based Resin Composite in Class II Restorations: 24-Month Results

OBJECTIVE

To compare the 24-month clinical performance of two different resin composites in class II slot restorations.

METHODS AND MATERIALS

Thirty-seven patients having at least two approximal carious lesions were enrolled in the study. A total of 116 teeth (58 pairs) were restored with either a silorane-based composite (Filtek Silorane) and its self-etch adhesive (Silorane Adhesive System, 3M ESPE) or a methacrylate-based packable resin composite (X-tra Fil) and its self-etch adhesive (Futurabond NR, VOCO GmbH) according to the toss of a coin. The restorations were evaluated at baseline and at six-, 12-, and 24-month recalls by two calibrated examiners according to the modified US Public Health Service criteria. The comparison of the two restorative materials for each category was performed with the Pearson chi-square test. Within group differences of the materials at different recall times were compared using the Cochran Q and Friedman tests. Bonferroni-adjusted McNemar test was used when significant difference was found (p<0.05).

RESULTS

After 24 months, no statistically significant differences were found between the two restorative materials for the criteria evaluated.

CONCLUSIONS

Both silorane- and methacrylate-based resin composites showed clinically acceptable performance in class II slot restorations after 24 months.

Effect of Selective Etch on the Bond Strength of Composite to Enamel Using a Silorane Adhesive

An improvement in bond strength to enamel has been demonstrated with the use of phosphoric acid prior to bonding with self-etch methacrylate-based adhesive agents. No research has evaluated the effect of phosphoric-acid etching of enamel with a newer self-etch silorane adhesive. The purpose of this study was to evaluate the shear-bond strength of composite to enamel using the self-etch silorane adhesive compared to other self-etching methacrylate-based adhesives, with or without a separate application of phosphoric acid. Bovine incisors were sectioned using a diamond saw and mounted in plastic pipe. The bonding agents were applied to flattened enamel surfaces with or without the application of 35% phosphoric acid. The bonded tooth specimens were inserted beneath a mold, and composite was placed incrementally and light cured. The specimens were stored for 24 hours and six months in water and tested in shear. Data were analyzed with a three-way analysis of variance (ANOVA) to evaluate the effects of surface treatment, adhesive agent, or time on the bond strength of composite to bovine enamel (α=0.05). Significant differences were found between the groups based on surface treatment (p<0.01) or adhesive agent (p<0.01), but not on time (p=0.19), with no significant interactions (p>0.14). Phosphoric-acid etching of bovine enamel significantly increased the bond strength of the self-etch methacrylate and the silorane adhesives. The methacrylate-based adhesives had significantly greater bond strength to enamel than the silorane adhesive.

Survival of direct resin restorations in posterior teeth within a 19-year period (1996-2015): A meta-analysis of prospective studies

OBJECTIVES

The aim of this study is to analyze the survival of posterior composite restorations published within the last 19 years (1996-2015).

METHODS

In this study only prospective, clinical trials with specification of the failure rate according to Class I/II composite fillings were included. Studies were analyzed according to the observation period (all studies vs. short-term vs. long-term studies). Retrospective studies and/or open laminate studies, tunnel restorations and Class V restorations were excluded. The following variables possibly influencing the failure rate were extracted from the studies: observation period, recall rate, average age of patients, number of patients, ratio of Class I/II fillings, number of restorations, ratio of premolars/molars, operator, method of isolation, bonding generation and filler size.

RESULTS

A total of 88 studies were included for statistical analysis. The observation period of the studies varied between 1 and 17 years, while most of the studies did not last longer than 5 years. Fracture of the restorations, secondary caries and marginal gap are the main causes for failure in the first 5 years (in descending order), while fracture and secondary caries are similarly distributed in long-term studies. Variables of investigation differed greatly in significance according to the respective observation period. The observation period, the recall rate, the ratio of Class I/II fillings and the number of restorations and patients had a significant influence on the overall failure rate when including all studies (short- and long-term). A linear correlation between the observation period and the failure rate was observed. In long-term studies these variables were not significant any longer. No significant difference in the failure rates between the materials per study was observed. The most common commercial composites investigated were: Tetric Ceram, Surefil, Filtek Supreme (incl. XT), Filtek Z250. The mean annual failure rate was 1.46% (±1.74%) for short-term studies and 1.97% (±1.53) for long-term studies. There is still a big need for clinical studies lasting longer than 5 years, as failure rates of composite restorations in posterior teeth increases with longer observation periods.

SIGNIFICANCE

A decreasing failure rate with an increasing recall rate as observed in our study suggests a patient selection in regard to availability and dental awareness. Internationally standardized evaluation criteria are mandatory in order to allow comparisons of the outcomes of clinical studies.

Bond strengths of silorane- and methacrylate-based composites to various underlying materials

OBJECTIVE

To evaluate shear bond strength (SBS) values of a methacrylate (FZ 250) and a silorane-based (FS) resin composite to various underlying materials.

MATERIALS AND METHODS

A total of 80 samples were prepared with four different underlying materials; a flowable (FLC) and a bulk-fill flowable composite (BFC), and a conventional (CGIC) and resin modified glass-ionomer cement (RMGIC). These underlying materials were laminated plus to methacrylate or silorane-based resin composites (n = 10). To evaluate the specimens SBS values were evaluated with a universal testing machine (cross-head speed; 1.0 mm/min). Statistical comparisons were carried out using two-way ANOVA and Tukey's post hoc test with a significance level of P < 0.05.

RESULTS

SBS values for FZ250 were significantly higher than for FS for all of the underlying materials tested (P < 0.05). SBS values of FZ250 to BFC were significantly higher than to all other materials (P < 0.05), whereas SBS values of FS did not vary significantly according to underlying material (P > 0.05).

CONCLUSION

The use of FS in conjunction with any of the tested materials showed lower SBS than the FZ 250. Also, new low elastic modulus liner BFC presented slightly good interfacial adhesion so, the usage of BFC as an underlying material may be preferable for FZ 250.