Development of whey protein isolate/chitosan/microcrystalline cellulose‐based bilayer films using surface‐pretreated polyethylene terephthalate substrate

Pectin/sodium alginate-based active film integrated with microcrystalline cellulose and geraniol for food packaging applications

Biopolymer-based packaging films were prepared from pectin (PEC) and sodium alginate (SA), with the incorporation of 10 % MCC and different concentrations of geraniol (GER at 2.5, 5.0, 7.5, and 10.0 %). Rheological properties suggested that film-forming solutions and film-forming emulsions exhibited a shear-thinning or pseudo-plastic non-Newtonian behaviour. The dried films were crosslinked with 2.0 % CaCl2. The addition of MCC into PEC/SA film enhanced the TS but reduced it with the impregnation of GER without influencing the EAB and toughness of the film. The water solubility of the films significantly reduced with the rise in the GER levels but enhanced the water vapor and oxygen barrier attributes. TGA demonstrated that incorporating MCC reduced the film's thermal degradation (44.92 % to 28.81 %), but GER had an insignificant influence on the thermal stability. FTIR spectra revealed that hydrogen bond formation was positively linked with the GER addition in the film formulation. X-ray diffractograms showed that prepared films were predominantly amorphous. Antimicrobial studies showed a complete reduction of Escherichia coli and Bacillus cereus in 24 h. Overall, the composite film displayed excellent physical and active properties and PEC/SA/MCC/5.0 %GER/CaCl2 film was considered the best formulation for food packaging applications.

Nanocellulose: An amazing nanomaterial with diverse applications in food science

Recently, nanocellulose has gained growing interests in food science due to its many advantages including its broad resource of raw materials, renewability, interface stability, high surface area, mechanical strength, prebiotic characteristics, surface chemistry versatility and easy modification. Since then, this review summarized the sources, morphology, and structure characteristics of nanocellulose. Meanwhile, the mechanical, chemical, and combined treatment methods for the preparation of nanocellulose with desired properties were elaborated. Furthermore, the application of nanocellulose in Pickering emulsions, reinforced food packaging, functional food ingredient, food-grade hydrogels, and biosensors were emphasized. Finally, the safety, challenges, and future perspectives of nanocellulose were discussed. This work provided key developments and effective benefits of nanocellulose for future research opportunities in food.

Effect of Cold Plasma Treatment on the Packaging Properties of Biopolymer-Based Films: A Review

Biopolymers, like polysaccharides and proteins, are sustainable and green materials with excellent film-forming potential. Bio-based films have gained a lot of attention and are believed to be an alternative to plastics in next-generation food packaging. Compared to conventional plastics, biopolymers inherently have certain limitations like hydrophilicity, poor thermo-mechanical, and barrier properties. Therefore, the modification of biopolymers or their films provide an opportunity to develop packaging materials with desired characteristics. Among different modification approaches, the application of cold plasma has been a very efficient technology to enhance the functionality and interfacial characteristics of biopolymers. Cold plasma is biocompatible, shows uniformity in treatment, and is suitable for heat-sensitive components. This review provides information on different plasma generating equipment used for the modification of films and critically analyses the impact of cold plasma on packaging properties of films prepared from protein, polysaccharides, and their combinations. Most studies to date have shown that plasma treatment effectively enhances surface characteristics, mechanical, and thermal properties, while its impact on the improvement of barrier properties is limited. Plasma treatment increases surface roughness that enables surface adhesion, ink printability, and reduces the contact angle. Plasma-treated films loaded with antimicrobial compounds demonstrate strong antimicrobial efficacy, mainly due to the increase in their diffusion rate and the non-thermal nature of cold plasma that protects the functionality of bioactive compounds. This review also elaborates on the existing challenges and future needs. Overall, it can be concluded that the application of cold plasma is an effective strategy to modify the inherent limitations of biopolymer-based packaging materials for food packaging applications.