Development and characterization of high methoxyl pectin film by using isomalt as plasticizer

Biodegradable films from soyhull cellulosic residue with UV protection and antioxidant properties improve the shelf-life of post-harvested raspberries

Post-harvest loss of fruits and vegetables, and health risks and environmental impact of current plastic packaging warrant new biodegradable packaging. To this end, cellulosic residue from agricultural processing byproducts is suitable due to its renewability and sustainability. Herein, soyhulls cellulosic residue was extracted, solubilized in ZnCl2 solution, and crosslinked with calcium ions and glycerol to prepare biodegradable films. The film combination was optimized using Box Behnken Design and film properties were characterized. The optimized film is translucent and exhibits tensile strength, elongation at break, water vapor permeability, hydrophobicity, and IC50 of 6.3 ± 0.6 MPa, 30.2 ± 0.9%, 0.9 ± 0.3 × 10-10 gm-1 s-1 Pa-1, 72.6°, and 0.11 ± 0.1 g/mL, respectively. The water absorption kinetics follow the Peleg model and biodegrade within 25 days at 24% soil moisture. The film extends the shelf life of raspberries by 6 more days compared to polystyrene film. Overall, the value-added soyhull cellulosic films are advantageous in minimizing post-harvest loss and plastic-related issues, emphasizing the principles of the circular bioeconomy.

Characterization and Applications of the Pectin Extracted from the Peel of Passiflora tripartita var. mollissima

The inadequate management of organic waste and excessive use of plastic containers cause damage to the environment; therefore, different studies have been carried out to obtain new biomaterials from agricultural subproducts. The objective of this work was to evaluate the feasibility of using the pectin extracted from the peel of Passiflora tripartita var. mollissima (PT), characterizing its type and viability for the production of edible biodegradable films. In addition, films of two thicknesses (23.45 ± 3.02 µm and 53.34 ± 2.28 µm) were prepared. The results indicated that PT is an excellent raw material for the extraction of pectin, with high yields (23.02 ± 0.02%), high galacturonic acid content (65.43 ± 2.241%), neutral sugars (ribose, xylose, glucose) and a high degree of esterification (76.93 ± 1.65%), classifying it as a high-methoxy pectin. Regarding the films, they were malleable and flexible, with a water vapor permeability from 2.57 × 10-10 ± 0.046 to 0.13 × 10-10 ± 0.029 g/s mPa according to thickness, being similar to other Passiflora varieties of edible films. The pectin extraction yield from PT makes this fruit a promising material for pectin production and its chemical composition a valuable additive for the food and pharmaceutical industries.

Optimization of citron peel pectin and glycerol concentration in the production of edible film using response surface methodology

Pectin-based edible film plasticized with glycerol has been developed, and the effect of pectin and glycerol concentration was optimized using response surface methodology for better mechanical properties and transparency. The upper and lower concentration of pectin (3-5 g) and glycerol (15%-25%) concentration ranges were considered in this study based on the preliminary experiment. The responses of the edible film determined were tensile strength, elongation at break and elastic modulus and opacity. The interaction effects of glycerol and pectin concentrations on edible film properties significantly affected the film properties. Tensile strength and opacity were positively affected by pectin concentrations; however, elastic modulus and elongation at break were negatively affected. Glycerol concentration negatively affected the edible film's tensile strength and elastic modulus. The decrease in the opacity of the biofilm was observed as the pectin concentration increased; however, glycerol had not shown a significant influence on opacity. The numerical optimization provided 4 g of pectin, and 20% of glycerol showed a strong and transparent edible film. The TGA curve showed that the maximum weight loss occurred between the temperatures 250-400 °C due to the loss of polysaccharides. From FTIR analysis, observed peaks around 1037 cm-1 represented the C-O-C stretching vibrations of the saccharide found in pectin and glycerol.

Waste Orange Peels as a Source of Cellulose Nanocrystals and Their Use for the Development of Nanocomposite Films

To date, approximately 30-50% of food is wasted from post-harvesting to consumer usage. Typical examples of food by-products are fruit peels and pomace, seeds, and others. A large part of these matrices is still discarded in landfills, while a small portion is valorized for bioprocessing. In this context, a feasible strategy to valorize food by-products consists of their use for the production of bioactive compounds and nanofillers, which can be further used to functionalize biobased packaging materials. The focus of this research was to create an efficient methodology for the extraction of cellulose from leftover orange peel after juice processing and for its conversion into cellulose nanocrystals (CNCs) for use in bionanocomposite films for packaging materials. Orange CNCs were characterized by TEM and XRD analyses and added as reinforcing agents into chitosan/hydroxypropyl methylcellulose (CS/HPMC) films enriched with lauroyl arginate ethyl (LAE). It was evaluated how CNCs and LAE affected the technical and functional characteristics of CS/HPMC films. CNCs revealed needle-like shapes with an aspect ratio of 12.5, and average length and width of 500 nm and 40 nm, respectively. Scanning electron microscopy and infrared spectroscopy confirmed the high compatibility of the CS/HPMC blend with CNCs and LAE. The inclusion of CNCs increased the films' tensile strength, light barrier, and water vapor barrier properties while reducing their water solubility. The addition of LAE improved the films' flexibility and gave them biocidal efficacy against the main bacterial pathogens that cause foodborne illness, such as Escherichia coli, Pseudomonas fluorescens, Listeria monocytogenes, and Salmonella enterica.