Effect of glutaraldehyde/glycerol ratios on the properties of chitosan films

Modified chitosan: Insight on biomedical and industrial applications

Chitosan (CS), a by -product of chitin deacetylation can be useful in a broad range of purposes, to mention agriculture, pharmaceuticals, material science, food and nutrition, biotechnology and of recent, in gene therapy. Chitosan is a highly desired biomolecule due to the existence of many sensitive functional groups inside the molecule and also because of its net cationicity. The latter provides flexibility for creating a wide range of derivatives for particular end users across various industries. This overview aims to compile some of the most recent research on the bio-related applications that chitosan and its derivatives can be used for. However, chitosan's reactive functional groups are amendable to chemical reaction. Modifying the material to show enhanced solubility, a greater range of application options and pH-sensitive targeting and others have been a major focus of chitosan research. This review describes the modifications of chitosan that have been made to improve its water solubility, pH sensitivity, and capacity to target chitosan derivatives. Applying the by-products of chitosan as antibacterial, in targeting, extended release and as delivery systems is also covered. The by-products of chitosan will be important and potentially useful in developing new biomedical drugs in time to come.

Chitosan-based foam composites for hexavalent chromium remediation: Effect of microcellulose and crosslinking agent content

Potentially toxic metal ions, such as hexavalent chromium (Cr6+), present in water concern the population's health due to their persistence, bioaccumulation potential, and high toxicity. Highly porous materials based on polysaccharides are promising technologies for metal removal due to their high surface area, biodegradability, and low toxicity. This study evaluated the effect of concentrations of microcellulose (0.5, 1, and 1.5 %) and glutaraldehyde (1, 2, and 3 %) in the adsorption capacity and mechanical properties of chitosan foams. The developed foams exhibited a three-dimensional structure with interconnected pores. Compared to foams without microcellulose, adding 1.5 % microcellulose increased up to 180 % in maximum stress supported by the foams and up to 135 % in Young's modulus. However, Cr6+ sorption capacity decreased with increasing microcellulose and crosslinking agent content due to the occupation of amino groups. Still, the foams exhibited a highly favorable sorption behavior, and the Sips isotherm model provided the best fit to the experimental data. The maximum sorption capacity reached approximately 1.4 mmol·g-1 at pH 4.0 and 25 °C. The foam structural integrity, enhanced mechanical properties, and efficient sorption capacity make them viable alternatives for environmentally friendly and cost-effective treatment of water contaminated with Cr6+ ions.

Exploring sustainable food packaging: Nanocellulose composite films with enhanced mechanical strength, antibacterial performance, and biodegradability

Food packaging films play a vital role in preserving and protecting food. However, due to their non-biodegradability, conventional packaging materials have led to significant environmental pollution. To overcome this hurdle, we have developed safe, innovative, sustainable and biodegradable packaging materials that can effectively extend the shelf life of food. In this study, two types of cellulose materials cellulose nanofibers (CNF) and carboxymethyl cellulose (CMC) with complementary roles were combined to prepare nanocellulose composite films with high transparency (90.3 %) of a certain thickness (30 ± 0.019 μm) by solution casting method, and their mechanical properties were further optimized by the addition of plasticizer-glycerol (Gly) and cross-linking agent-glutaraldehyde (GA), so as to maintain the strong tensile strength (≈112.60 MPa) and better malleability (4.12 %). In addition, we loaded the natural active agent tea polyphenols (TPs) with different concentrations to study the inhibition effect on E.coli and S.aureus and to simulate food packaging. Finally, we also found that the synthesized nanocellulose composite films can also achieve rapid degradation in a short time through soil burial, water flushing and immersion. The excellent performance demonstrated in this study provides reference value for further replacing petroleum-based materials with biomass materials in the field of food packaging.

Development of highly reusable, mechanically stablecorn starch-based aerogel using glycerol for potential application in the storage of fresh spinach leaves

Impact of glycerol on the physico-functional, morphological, mechanical, and rehydration properties ofcorn starch-based aerogel has been investigated. The aerogel was prepared from hydrogel (sol-gel method) using solvent exchange and supercritical CO₂ drying. Glycerol-infused aerogel had a more connected, denser structure (0.38-0.45 g/cm³), enhanced hygroscopic behavior, and was reusable up to eight times in terms of its capacity to absorb water after being drawn from the soaked sample. However, the inclusion of glycerol reduced the aerogel's porosity (75.89-69.91 %) and water absorption rate (WAR; 118.53-84.64 %) but enhanced its percentage shrinkage (75.03-77.99 %) and compressive strength (26.01-295.06 N). The most effective models for describing the rehydration behavior of aerogel were determined to be the Page, Weibull, and Modified Peleg models. Glycerol addition improved the internal strength of the aerogel so could be recycled without significant change in the physical characteristics of the aerogel. By effectively eliminating the condensed moisture that was developed inside the packing owing to the transpiration of fresh spinach leaves, the aerogel extended the storage life of the leaves by up to eight days. The glycerol-based aerogel has the potential to be employed as a carrier matrix for various chemicals and a moisture scavenger.

Modification of Physio-Mechanical Properties of Chitosan-Based Films via Physical Treatment Approach

The premise of this work is the modification of the properties of chitosan-based film for possible use in food packaging applications. The biofilm was prepared via thermal and mechanical treatment through blending polymers with chitosan using Polyvinyl Alcohol (PVA) and loading different types of chemical agents, i.e., citric acid (CA), succinic acid (SA), and tetraethoxysilane (TEOS). The modification was carried out under high-speed homogenization at elevated temperature to induce physical cross-linkage of chitosan polymer chains without a catalyst. The findings showed that PVA improved the chitosan films' Tensile strength (TS) and elongation at break (Eb). The presence of chemicals caused an increase in the film strength for all samples prepared, in which a 5% w/w of chemical in the optimum composition CS/PVA (75/25) provided the maximum strength, namely, 33.9 MPa, 44.0 MPa, and 41.9 MPa, for CA-5, SA-5, and TEOS-5, respectively. The chemical agents also increased the water contact angles for all tested films, indicating that they promoted hydrophobicity. The chemical structure analysis showed that, by incorporating three types of chemical agents into the CS/PVA blend films, no additional spectral bands were found, indicating that no covalent bonds were formed. The thermal properties showed enhancement in melting peak and degradation temperature of the blend films, compared to those without chemical agents at the optimum composition. The X-ray diffraction patterns exhibited that PVA led to an increasing crystallization tendency in the blend films. The morphological observation proved that no irregularities were detected in CS/PVA blend films, representing high compatibility with both polymers.

Antioxidant packaging films developed by in-situ cross-linking chitosan with dialdehyde starch-catechin conjugates

In this study, four dialdehyde starch-catechin (DAS-catechin) conjugates were prepared by conjugating (-)-epicatechin (EC), (-)-epigallocatechin (EGC), (-)-epicatechin gallate (ECG) and (-)-epigallocatechin gallate (EGCG) with dialdehyde starch. Then, DAS-catechin conjugates were used as antioxidant and cross-linking agents to produce chitosan (CS) based antioxidant packaging films. The functionality of CS/DAS-catechin conjugate films was determined. Results showed four DAS-catechin conjugates formed Schiff-base linkages and hydrogen bond interactions with CS, resulting in improved film uniformity. Compared with plain CS film, CS/DAS-catechin conjugate films owned higher UV-vis light, water vapor and oxygen barrier ability, lower swelling degree, and stronger tensile strength, thermal stability and antioxidant activity. The cross-linking between CS and DAS-catechin conjugates delayed the biodegradable process of CS film. CS/DAS-catechin conjugate films showed good performance on inhibiting sunflower seed oil oxidation. Notably, CS/DAS-ECG conjugate film had the highest oxygen barrier, mechanical and antioxidant performances among four CS/DAS-catechin conjugate films. Therefore, CS/DAS-ECG conjugate film is an antioxidant packaging candidate for edible oil.

Biodegradable, biomimetic, and nanonet-engineered membranes enable high-flux and highly-efficient oil/water separation

Porous membranes with fascinating super-wettable surface and tunable porous architecture for oil-water separation have been developed rapidly, however, the serious secondary marine pollution caused by the non-degradable defectiveness of membranes themselves is still a thorny problem. Herein, we create an eco-friendly membrane with biomimetic cobweb-like nanostructure via assembling two-dimensional bacterial cellulose nanonets on the starch nanofibrous membrane on a large scale. The obtained novel composite membranes exhibit integrated properties of sub-micron pore size, ultrahigh porosity, superhydrophilicity, and underwater superoleophobicity, stemming from the synergistic effect of the hydrated nanonet-skin-layer and porous starch matrix. By virtue of the narrow-distributed sub-micron pores, ultrahigh porosity, and ultrathin thickness, the resulting membrane shows outstanding performance of excellent separation efficiency (up to 99.996%), high percolation flux (maximum of 15968 L m^-2 h^-1), well surpassing the conventional microfiltration membranes. More significantly, with the advantage of biodegradability and anti-oil-fouling property, the membrane could serve as the robust platform for long-term wastewater remediation.

Modulation of interfacial interactions toward strong and tough cellulose nanofiber-based transparent thin films with antifogging feature

Cross-linking is often performed to overcome the weak mechanical properties of native polymer films in order to expand their functional properties and applications. While this approach offers enhanced strength to the film, the film also suffers from low flexibility, low toughness and high brittleness. However, in view of the growing demand for strong and tough transparent thin films, this article reported our study to develop films made from cellulose nanofiber (CNF) via tailoring the interfacial bonding interactions through the application of glycerol (Gly) and glutaraldehyde (GA), which functioned as a plasticizer and cross-linking agent, respectively. Among the prepared films, the 10GA-8Gly-CNF film exhibited the best results with regard to the enhancement in the tensile strength (21.1%), Young's modulus (10.6%), elongation at break (100%) and toughness (32.7%), as compared to the native CNF film. Importantly, treating the surface of the film to radiofrequency oxygen plasma endowed the film with antifogging property, without compromising the optical clarity.

A versatile and ultrasensitive molecularly imprinted electrochemiluminescence sensor with HRP-encapsulated liposome labeled by light-triggered click reaction for pesticide residues

A novel approach for trace detection of fipronil with a molecularly imprinted electrochemiluminescence sensor (MIECLS) is proposed. The sensitivity is significantly improved via signal amplification of the enzymatic reaction of horseradish peroxidase (HRP) released from encapsulated liposomes which linked onto the template molecules after rebinding. The molecularly imprinted polymer membrane was prepared through the electropolymerization of monomers with fipronil as a template. After the elution of the template molecules, the analyte fipronil was reabsorbed into the cavities. HRP-encapsulated liposomes were linked to the target molecules by light-triggered click reaction. The higher the concentration of the target was, the more HRP-encapsulated liposomes were present on the molecularly imprinted polymer (MIP) sensor. Then, HRP was liberated from liposomes, and the catalytic degradation of hydrogen peroxide (H₂O₂) by HRP occurs, which changed the electrochemiluminescence intensity of luminol significantly. The change of the ∆ECL intensity was linearly proportional to the logarithm of the fipronil concentration ranging from 1.00 × 10^-14 to 1.00 × 10^-9 mol/L, and the detection limit was 7.77 × 10^-16 mol/L. The recoveries obtained ranged from 95.7 to 105.8% with RSD < 5%. The sensitivity of the detection was significantly improved, and the analysis process was simplified in that the incubation step required in the conventional method was avoided. The sensor proposed provides a feasible platform for ultra-trace amount determination.

Electrophoretic fabrication of a robust chitosan/polyethylene glycol/polydopamine composite film for UV-shielding application

The film-forming process of chitosan composite films is an important issue because it affects their experimental design, chemicals used, and feasibility of large-scaled fabrication. In this work, electrophoresis is employed to produce chitosan composite films with significantly reduced processing time and environmentally friendly chemicals. With the addition of hydrogen peroxide and polyethylene glycol, the parasitic hydrogen bubble formation during the electrophoresis of chitosan and polydopamine is effectively inhibited that leads to the formation of a defectless chitosan/polyethylene glycol/polydopamine composite film which could be removed from the substrate readily. In addition, the chitosan/polyethylene glycol/polydopamine composite film reveals significantly improved tensile strength and a slower decomposition rate as compared to those of chitosan film and chitosan/polyethylene glycol composite film. This is attributed to the strong interaction between chitosan and polydopamine. Lastly, the chitosan/polyethylene glycol/polydopamine composite film exhibits excellent UV-shielding ability without compromising its visible transparency.

Extremely Sensitive Molecularly Imprinted ECL Sensor with Multiple Probes Released from Liposomes Immobilized by a Light-Triggered Click Reaction

A molecularly imprinted electrochemiluminescence sensor was prepared for sensitive and selective determination of aminotriazole via a novel strategy of multiple Ru(bpy)₃Cl₂ probes released from liposomes immobilized by a light-triggered click reaction. This sensing strategy provides a platform for trace detection of amino-containing pesticides. The target on the molecularly imprinted membrane connected to the Ru(bpy)₃Cl₂-encapsulated liposomes via the click reaction. After the destabilizing agent Triton X-100 was added, numerous Ru(bpy)₃Cl₂ molecules were released by liposomes on the molecularly imprinted polymer electrode. The ECL response of the sensor was linearly proportional to the logarithm of the aminotriazole concentration ranging from 5.00 × 10^-18 to 1.00 × 10^-12 mol/L, and the detection limit was 1.15 × 10^-18 mol/L. The sensitivity of the detection was significantly improved, and the analysis process was simplified.

A Slot-Die Technique for the Preparation of Continuous, High-Area, Chitosan-Based Thin Films

Chitosan-based films have a diverse range of potential applications but are currently limited in terms of commercial use due to a lack of methods specifically designed to produce thin films in high volumes. To address this limitation directly, hydrogels prepared from chitosan, chitosan-tetraethoxy silane, also known as tetraethyl orthosilicate (TEOS) and chitosan-glutaraldehyde have been used to prepare continuous thin films using a slot-die technique which is described in detail. By way of preliminary analysis of the resulting films for comparison purposes with films made by other methods, the mechanical strength of the films produced was assessed. It was found that as expected, the hybrid films made with TEOS and glutaraldehyde both show a higher yield strength than the films made with chitosan alone. In all cases, the mechanical properties of the films were found to compare very favorably with similar measurements reported in the literature. In order to assess the possible influence of the direction in which the hydrogel passes through the slot-die on the mechanical properties of the films, testing was performed on plain chitosan samples cut in a direction parallel to the direction of travel and perpendicular to this direction. It was found that there was no evidence of any mechanical anisotropy induced by the slot die process. The examples presented here serve to illustrate how the slot-die approach may be used to create high-volume, high-area chitosan-based films cheaply and rapidly. It is suggested that an approach of the type described here may facilitate the use of chitosan-based films for a wide range of important applications.