Effects of heat treatment and ultraviolet radiation on physicochemical, microbiological, and bioactive properties of shalgam juice

Herein, we aimed to investigate the physicochemical, bioactive, microbial, and sensory properties of 5 different ultraviolet (UV) treatment conditions, varying in flow rate (1.5-2.5-3.5 L/min), temperature (5-25°C), and UV-intensities (5.1-10.1 mW/cm2), along with heat treatment (HT, 72°C for 20 s), and untreated samples (C) over a storage period of 150 days. At the beginning of storage, the samples exhibited a dry matter content ranging from 2.15% to 2.38%, pH levels ranging from 3.46 to 3.53, and total acidity between 6.35 and 6.51 mg/L. L* values were recorded between 33.09 and 33.50, while ΔC values ranged from 9.13 to 9.24. However, by the end of storage, these values had changed to 2.28-2.43% for dry matter, 3.47-3.49 for pH, 6.22-6.35 mg/L for acidity, 34.94-35.57 for L* values, and 6.95-7.01 for ΔC values. Throughout storage, total mesophilic aerobic bacteria (TMAB), lactic acid bacteria (LAB), and yeast and molds were measured at the highest levels in the C samples when compared to HT and UV-treated samples. At the end of storage, compared to the initial values, TMAB levels in UV-treated samples decreased from 3.29-4.80 log cfu/mL to 3.13-3.92 log cfu/mL. On the other hand, compared to the initial values (3.29-4.01 log cfu/mL), LAB levels decreased by 1.93-2.42 log cfu/mL by the end of storage. Initially, in UV-treated samples, the TPC (total phenolic content) ranged from 398.15 to 403.86 mg GAE/g, DPPH antioxidant activity ranged from 811.52 to 834.89 mg TE/L, and TAC (total anthocyanin content) ranged from 5.58 to 5.74 mg/L. By the end of storage, an increase was observed in all bioactive properties analyzed. Furthermore, UV treatment positively impacted the bioaccessibility of bioactive compounds compared to the HT-treated sample. Overall, this study confirms that UV-C technology can be used as an alternative method for extending the shelf life of shalgam juice while preserving its sensory and bioactive attributes.

Effect of the High Hydrostatic Pressure Process on the Microbial and Physicochemical Quality of Shalgam

The processing of shalgam requires the use of an appropriate processing technique due to yeast overgrowth. With advancements in processing technology, high hydrostatic pressure (HHP) as nonthermal and nonchemical preservation has gained attention for its potential. Response surface methodology with the Box-Behnken experimental design was used to make sense of the effects of HHP parameters, namely, pressure (100-500 MPa), temperature (20-40 °C), and time (5-15 min), on microbial and physicochemical factors (pH, total soluble solids, titratable acidity, bioactive compounds, color values). The reduction in the counts of total mesophilic aerobic bacteria, lactic acid bacteria, and yeast-mold increased proportionally with the increase of all pressure levels, application temperatures, and pressurization times (p < 0.05). Stability was maintained in pH, total solubility, and some color parameters such as L*, a*, ΔE, yellow color tone, and red color tone. All findings of the bioactive components (phenolic content, flavonoid content, antioxidant activity, and monomeric anthocyanin content) in the RSM design showed a significant change only in proportion to the square of time (p < 0.05). The optimum pressurization parameter combination of shalgam was determined as a pressure of 367 MPa, temperature of 31.9 °C, and process time of 10.5 min. Under these conditions, values of yeast and mold (Y&M) reduction, total flavonoid content (TFC), total monomeric anthocyanin contents (TMACs), titratable acidity (TA), and reducing sugar content (RSC) were obtained as 4.30 log cfu/mL, 192.89 mg QE/100 mL, 11.88 mg/100 mL, 2.41 glactic acid/L, and 6.78 mg/100 mL, respectively. In particular, the findings in the basic color parameters proved that there was no significant change in the saturated red color of the shalgam. Gallic acid, caffeic acid, chlorogenic acid, catechin, cyanidin-3-O-glucoside, malvidin-3-O-glucoside, and peonidin-3-O-glucoside derivatives are dominant phenolic and anthocyanin compounds, which are frequently found in turnip plants. No important losses in bioactive components were observed, despite changes in pressure and temperature parameters. The HHP method can be suggested to have great potential in the processing of shalgam (fermented turnip beverage) in terms of its ability to maintain the flavors, colors, and nutrients, in addition to ensuring microbiological safety when compared to other preservation methods.

Pulsed electric field for shalgam juice: effects on fermentation, shelf-life, and sensory quality

BACKGROUND

Pulsed electric field (PEF) has become a reality in the food industry as a non-thermal application. PEF is used due to its benefits such as increasing the extraction of anthocyanin or other bioactive substances, shortening the fermentation time, and reducing the microbiological load by electroporation. This study aimed to determine the effect of PEF pretreatment on the fermentation, chemical, microbiological, and sensory properties of shalgam juice. For this purpose, PEF with 1 kV cm-1 of field strength was used as a pretreatment for shalgam juice and changes in control and PEF-treated samples were monitored during fermentation and 70 days of cold storage (4 °C).

RESULTS

The pH and lactic acid content during fermentation were similar for both samples. The effect of PEF on pH (3.15-3.39), titratable acidity (4.35-5.49 g L-1 ), total phenolic content (279-766 mg mL-1 GAE) and antioxidant activity (694-2091 μmol Trolox mL-1 ) during storage was insignificant. PEF-treated samples had lower total aerobic mesophilic bacteria (~9%) and lactic acid bacteria (~3%) counts than the control samples at the end of 70 days. Sensory analyses performed at 30th and 60th days of storage with 74 panelists revealed that the color, taste, sourness, saltiness, bitterness, and general acceptability were not inversely affected by PEF.

CONCLUSION

Our results could be a basis to produce shalgam juice commercially by PEF treatment. Although more studies with new experimental designs should be carried out, preliminary results indicated that the use of PEF might have a potential for fermented products such as shalgam juices. © 2023 Society of Chemical Industry.

High-Pressure Processing of Traditional Hardaliye Drink: Effect on Quality and Shelf-Life Extension

Hardaliye, as one of the oldest and lesser known traditional beverages, is produced using red grape pomace from wine production. This drink production is achieved through lactic acid fermentation, with the addition of sour cherry leaves and mustard seeds-either heat-treated, grinded, or whole-in various concentrations. Hardaliye has a very short shelf life; thus, efforts have recently been made to process hardaliye with novel processing technologies in order to achieve shelf-life extension. Therefore, the high-hydrostatic-pressure (HHP) processing of hardaliye was performed to determine its impact on important properties, including in microbial inactivation and shelf-life extension, with respect to a Box-Behnken experimental design. Maximum log reductions of 5.38 ± 0.6, 5.10 ± 0.0, 5.05 ± 0.2, and 4.21 ± 0.0 with HHP were obtained for Brettanomyces bruxellensis, total mesophilic aerobic bacteria, Lactobacillus brevis, and total mold and yeast, respectively. The processing parameters of 490 MPa and 29 °C for 15 min were found as the optimal conditions, with the response variables of an optical density at 520 nm and the inactivation of L. brevis. The samples processed at the optimal conditions were stored at both 4 and 22 °C for 228 d. While the non-treated control samples at 4 and 22 °C were spoiled at 15 and 3 d, the HHP-treated samples were spoiled after 228 and 108 d at 4 and 22 °C, respectively.

Pulsed Electric Field Processing of Red Wine: Effect on Wine Quality and Microbial Inactivation

Pulsed electric field (PEF) treatment of red wine samples with energies changing from 2.4 to 13.2 kJ to inactivate Saccharomyces cerevisiae, Hansenula anomala, Candida lipolytica, Lactobacillus delbrueckii ssp. bulgaricus, and Escherichia coli O157:H7 with the determination of the changes in the quality and sensory properties in addition to metal ion concentration (Na, Mg, K, and Mn) were explored. Increased applied energy resulted in a significant increase in pH, conductivity, lightness (L*), yellowness (b*), and total phenolic substance content with significant inactivation of all microorganisms with no significant change in metal ion concentration. Sensory properties of particle status, sour taste, and aftertaste were significantly decreased, whereas the other measured properties were significantly increased by 13.2 kJ PEF treatment (p < 0.05). Joint optimization studies for the most optimal processing parameters for the measured properties were 488 s, 0.13 kJ, and 0.22 kV; 488 s, 13.2 kJ, and 31 kV; 348 s, 9.39 kJ, and 31 kV/cm; and 488 s, 13.2 kJ, and 0 kV EFS, with 0.79, 0.69, 1.00, and 0.72 composite desirability, respectively.