Inhibition of bacterial human pathogens on tomato skin surfaces using eugenol‐loaded surfactant micelles during refrigerated and abuse storage

Reduction of Bacterial Enteric Pathogens and Hygiene Indicator Bacteria on Tomato Skin Surfaces by a Polymeric Nanoparticle-Loaded Plant-Derived Antimicrobial

This study determined Escherichia coli O157:H7 and Salmonella enterica serovar Typhimurium survival on tomato skins as a function of sanitization treatment, under three differing contamination and sanitization scenarios. Sanitizing treatments consisted of the plant-derived antimicrobial (PDA) geraniol (0.5 wt.%) emulsified in the polymeric surfactant Pluronic F-127 (GNP), 0.5 wt.% unencapsulated geraniol (UG), 200 mg/L hypochlorous acid at pH 7.0 (HOCl), and a sterile distilled water wash (CON). Experimental contamination and sanitization scenarios tested were: (1) pathogen inoculation preceded by treatment; (2) the pathogen was inoculated onto samples twice with a sanitizing treatment applied in between inoculations; and (3) pathogen inoculation followed by sanitizing treatment. Reductions in counts of surviving pathogens were dependent on the sanitizing treatment, the storage period, or the interaction of these independent/main effects. GNP treatment yielded the greatest reductions in pathogen counts on tomato skins; pathogen survivor counts following GNP treatment were consistently statistically lower than those achieved by HOCl or UG treatments (p < 0.05). GNP treatment provided greatest pathogen reduction under differing conditions of pre- and/or post-harvest cross-contamination, and reduced hygiene-indicating microbes the most of all treatments on non-inoculated samples. Encapsulated geraniol can reduce the risk of pathogen transmission on tomato fruit, reducing food safety hazard risks for tomato consumers.

Encapsulated Plant-Derived Antimicrobial Reduces Enteric Bacterial Pathogens on Melon Surfaces during Differing Contamination and Sanitization Treatment Scenarios

This study aimed to quantify survival in Escherichia coli O157:H7 and Salmonella enterica serovar Typhimurium isolates on melon rind surface samples achieved by sanitizer treatment under three differing melon contamination and sanitization scenarios. Sanitizing treatments consisted of the plant-derived antimicrobial (PDA) essential oil component (EOC) geraniol (0.5 wt.%) entrapped in the polymeric surfactant Pluronic F-127 (GNP), 0.5 wt.% unencapsulated geraniol (UG), 200 mg/L hypochlorous acid at pH 7.0 (HOCl), and a sterile distilled water wash (CON). The experimental contamination and sanitization scenarios tested were: (1) pathogen inoculation preceded by treatment; (2) the pathogen was inoculated onto samples twice with sanitizing treatment applied in between inoculation events; or (3) pathogen inoculation followed by sanitizing treatment. Reductions in the numbers of surviving pathogens were dependent on the sanitizing treatment, the storage period, or the interaction of these effects. GNP treatment provided the greatest reductions in surviving pathogen counts on melon rinds, but these did not regularly statistically differ from those achieved by HOCl or UG treatment. GNP treatment provided the best pathogen control under differing conditions of pre- and/or post-harvest cross-contamination and can be applied to reduce the risk of pathogen transmission on melon rinds.

Recent developments in antimicrobial and antifouling coatings to reduce or prevent contamination and cross-contamination of food contact surfaces by bacteria

Illness as the result of ingesting bacterially contaminated foodstuffs represents a significant annual loss of human quality of life and economic impact globally. Significant research investment has recently been made in developing new materials that can be used to construct food contacting tools and surfaces that might minimize the risk of cross-contamination of bacteria from one food item to another. This is done to mitigate the spread of bacterial contamination and resultant foodborne illness. Internet-based literature search tools such as Web of Science, Google Scholar, and Scopus were utilized to investigate publishing trends within the last 10 years related to the development of antimicrobial and antifouling surfaces with potential use in food processing applications. Technologies investigated were categorized into four major groups: antimicrobial agent-releasing coatings, contact-based antimicrobial coatings, superhydrophobic antifouling coatings, and repulsion-based antifouling coatings. The advantages for each group and technical challenges remaining before wide-scale implementation were compared. A diverse array of emerging antimicrobial and antifouling technologies were identified, designed to suit a wide range of food contact applications. Although each poses distinct and promising advantages, significant further research investment will likely be required to reliably produce effective materials economically and safely enough to equip large-scale operations such as farms, food processing facilities, and kitchens.

Antimicrobial-Loaded Polymeric Micelles Inhibit Enteric Bacterial Pathogens on Spinach Leaf Surfaces During Multiple Simulated Pathogen Contamination Events

Protecting fresh-packed produce microbiological safety against pre- and post-harvest microbial pathogen contamination requires innovative antimicrobial strategies. Although largely ignored in the scientific literature, there exists the potential for gross failure in food safety protection of fresh fruits and vegetables leading to opportunity for multiple produce contamination events to occur during production and post-harvest handling of food crops. The primary objective of this research was to determine the efficacy of plant-derived antimicrobial-loaded nanoparticles to reduce Escherichia coli O157:H7 and Salmonella enterica serovar Typhimurium on spinach leaf surfaces whilst simulating multiple pathogen contamination events (pre-harvest and post-harvest). Spinach samples were inoculated with a blend of E. coli O157:H7 and S. Typhimurium, each diluted to ~8.0 log10 CFU/mL. The inoculated samples were then submerged in solutions containing nanoparticles loaded with geraniol (GPN; 0.5 wt.% geraniol), unencapsulated geraniol (UG; 0.5 wt.%), or 200 ppm chlorine (HOCl; pH 7.0), with untreated samples serving for controls. Following antimicrobial treatment application, samples were collected for surviving pathogen enumeration or were placed under refrigeration (5°C) for up to 10 days, with periodic enumeration of pathogen loads. After 3 days of refrigerated storage, all samples were removed, aseptically opened and subjected to a second inoculation with both pathogens. Treatment of spinach surfaces with encapsulated geraniol reduced both pathogens to non-detectable numbers within 7 days of refrigerated storage, even with a second contamination event occurring 3 days after experiment initiation. Similar results were observed with the UG treatment, except that upon recontamination at day 3, a higher pathogen load was detected on UG-treated spinach vs. GPN-treated spinach. These data fill a research gap by providing a novel tool to reduce enteric bacterial pathogens on spinach surfaces despite multiple contamination events, a potential food safety risk for minimally processed edible produce.

Impacts of Clarification Techniques on Sample Constituents and Pathogen Retention

Determination of the microbial content in foods is important, not only for safe consumption, but also for food quality, value, and yield. A variety of molecular techniques are currently available for both identification and quantification of microbial content within samples; however, their success is often contingent upon proper sample preparation when the subject of investigation is a complex mixture of components such as foods. Because of the importance of sample preparation, the present study employs a systematic approach to compare the effects of four different separation techniques (glass wool, 50 μm polypropylene filters, graphite felt, and continuous flow centrifugation (CFC)) on sample preparation. To define the physical effects associated with the use of these separation methods, a multifactorial analysis was performed where particle size and composition, both pre- and post- processing, were analyzed for four different food matrices including lean ground beef, ground pork, ground turkey and spinach. Retention of three important foodborne bacterial pathogens (Escherichia coli O157:H7, Salmonella enterica, and Listeria monocytogenes) was also examined to evaluate the feasibility of the aforementioned methods to be utilized within the context of foodborne pathogen detection. Data from the multifactorial analysis not only delineated the particle size ranges but also defined the unique compositional profiles and quantified the bacterial retention. The three filtration membranes allowed for the passage of bacteria with minimal loss while CFC concentrated the inoculated bacteria. In addition, the deposition and therefore concentration of food matrix observed with CFC was considerably higher for meat samples relative to spinach. However, filtration with glass wool prior to CFC helped clarify meat samples, which led to considerably lower amounts of solids in the CFC vessel post processing and an increase in the recovery of the bacteria. Overall, by laying a framework for the deductive selection of sample preparation techniques, the results of the study can be applied to a range of applications where it would be beneficial to scientifically guide the pairing of the criteria associated with a downstream detection method with the most advantageous sample preparation techniques for complex matrices such as foods.

Inhibition of Escherichia coli O157:H7 and Salmonella enterica Isolates on Spinach Leaf Surfaces Using Eugenol-Loaded Surfactant Micelles

Spinach and other leafy green vegetables have been linked to foodborne disease outbreaks of Escherichia coli O157:H7 and Salmonellaenterica around the globe. In this study, the antimicrobial activities of surfactant micelles formed from the anionic surfactant sodium dodecyl sulfate (SDS), SDS micelle-loaded eugenol (1.0% eugenol), 1.0% free eugenol, 200 ppm free chlorine, and sterile water were tested against the human pathogens E. coli O157:H7 and Salmonella Saintpaul, and naturally occurring microorganisms, on spinach leaf surfaces during storage at 5 °C over 10 days. Spinach samples were immersed in antimicrobial treatment solution for 2.0 min at 25 °C, after which treatment solutions were drained off and samples were either subjected to analysis or prepared for refrigerated storage. Whereas empty SDS micelles produced moderate reductions in counts of both pathogens (2.1–3.2 log₁₀ CFU/cm²), free and micelle-entrapped eugenol treatments reduced pathogens by >5.0 log₁₀ CFU/cm² to below the limit of detection (<0.5 log₁₀ CFU/cm²). Micelle-loaded eugenol produced the greatest numerical reductions in naturally contaminating aerobic bacteria, Enterobacteriaceae, and fungi, though these reductions did not differ statistically from reductions achieved by un-encapsulated eugenol and 200 ppm chlorine. Micelles-loaded eugenol could be used as a novel antimicrobial technology to decontaminate fresh spinach from microbial pathogens.