Using hybrid atomic force microscopy and infrared spectroscopy (AFM-IR) to identify chemical components of the hair medulla on the nanoscale

Spectral histology of hair and hair follicle using infrared microspectroscopy

OBJECTIVE

Today, there is only limited knowledge of the spatial organization of hair chemistry. Infrared microspectroscopy is a well-established tool to provide such information and has significantly contributed to this field. In this study, we present new results combining multiple infrared microspectroscopy methods at different length scales to create a better chemical histology of human hair, including the hair follicle, hair shaft, hair medulla and hair cuticle.

METHODS

We used hyperspectral IR imaging & spectroscopy (HIRIS) and synchrotron-radiation FTIR microspectroscopy (SR-μFTIR) to measure transversal hair sections and SR-μFTIR to obtain high-resolution maps of longitudinal sections from the hair shaft and from the hair follicle. We used optical photothermal IR microspectroscopy (OPTIR) to analyse the cuticle surface of intact hairs.

RESULTS

By mapping longitudinal sections of the human hair follicle with confocal SR-μFTIR, we report the first demonstration of glycogen presence in the outer root sheath of the hair follicle by spectroscopy, and its quantification at the micron scale. Spectral maps, combined with machine learning-based analysis, enabled us to differentiate the various layers of the hair follicle and provided insights into the chemical changes that occur during hair formation in the follicle. Using HIRIS and SR-μFTIR to analyse the hair medulla in transversal sections of human hairs, we report here, for the first time by vibrational spectroscopy methods, the detection of unsaturated lipids at very low concentrations in the medulla. By analysing longitudinal sections of the hair shaft with SR-μFTIR, we found that calcium carboxylates are present in large regions of the hair cuticle, and not just in small focal areas as previously thought. We then use OPTIR to analyse the hair cuticle of intact hairs at submicron resolution without sectioning and report the distribution of calcium carboxylates at the surface of intact hair for the first time.

CONCLUSION

These new findings illustrate the potential of infrared microspectroscopy for imaging the chemical composition of human hair and may have implications for biomedical research or cosmetology.

Identification and classification of proteins by FTIR microspectroscopy. A proof of concept

FTIR spectroscopy is well known for its molecule fingerprinting capability but is also able to differentiate classes in complex biological systems. This includes strain typing and species level identification of bacterial, yeast or fungal cells, as well as distinguishing between cell layers in eukaryotic tissues. However, its use for the identification of macromolecules such as proteins remains underexplored and rarely used in practice. Here we demonstrate the efficacy of FTIR microspectroscopy coupled with machine learning methods for rapid and accurate identification of proteins in their dry state within minutes, from very small quantities of material, if they are obtained in a pure aqueous solution. FTIR microspectroscopy can provide additional information beside identification: it can detect small differences among different purification batches potentially originating from post-translational modifications or distinct folding states. Moreover, it distinguishes glycoproteins and evaluate glycosylation while detecting contaminants. This methodology presents itself as a valuable quality control tool in protein purification processes or any process requiring the utilization of precisely identified, pure proteins.

Applying the Atomic Force Microscopy Technique in Medical Sciences-A Narrative Review

Penetrating deep into the cells of the human body in real time has become increasingly possible with the implementation of modern technologies in medicine. Atomic force microscopy (AFM) enables the effective live imaging of cellular and molecular structures of biological samples (such as cells surfaces, components of biological membranes, cell nuclei, actin networks, proteins, and DNA) and provides three-dimensional surface visualization (in X-, Y-, and Z-planes). Furthermore, the AFM technique enables the study of the mechanical, electrical, and magnetic properties of cells and cell organelles and the measurements of interaction forces between biomolecules. The technique has found wide application in cancer research. With the use of AFM, it is not only possible to differentiate between healthy and cancerous cells, but also to distinguish between the stages of cancerous conditions. For many years, AFM has been an important tool for the study of neurodegenerative diseases associated with the deposition of peptide amyloid plaques. In recent years, a significant amount of research has been conducted on the application of AFM in the evaluation of connective tissue cell mechanics. This review aims to provide the spectrum of the most important applications of the AFM technique in medicine to date.

Evaluation of hair surface structure and morphology of patients with lichen planopilaris (LPP) by atomic force microscopy (AFM)

BACKGROUND

Lichen planopilaris (LPP) is a chronic lymphocytic skin disease manifested by progressive scarring alopecia. The diagnosis of LPP is made based on histopathological examination, although it is not always definite. The current study evaluates the effectiveness of non-invasive atomic force microscopy (AFM) hair examination in detecting morphological differences between healthy and diseased hair.

MATERIALS AND METHODS

Here, three to five hairs from lesional skin of 10 LPP patients were collected and examined at nine locations using AFM. At least four images were taken at each of the nine sites. Metric measurements were taken and metric (length, width, and scale step height) and morphological features (striated and smooth surface of scales, the presence of endocuticle and cortex, shape of scales edges, scratches, pitting, cracks, globules, and wavy edge) were compared with hair from healthy controls. In addition, areas on diseased hair where the process of pathological, unnatural delamination of the hair fiber occurs are described.

RESULTS

There was a statistically significant difference in the number of scratches in the initial sections of the LPP hair, in the intensity of wavy edges along the entire length of the tested hair, and in the number of scales with pitting in the middle section of the hair. In addition, a statistically significant higher number of scales with striated surface was found in LPP group starting at 3.5 cm from the root continuing towards the free end of the hair. Other morphological changes such as presence of cortex, globules, oval indentations, and rod-like macrofibrillar elements were also assessed, however, detailed results are not presented, as the differences shown in the number of these morphological changes were not significantly different.

CONCLUSION

This publication outlines the differences between virgin, healthy Caucasian hair, and the hair of LPP patients. The results of this study can be used for further research and work related to LPP. This is the first attempt to characterize the hair of LPP patients using AFM.

Evaluation of Surface Structure and Morphological Phenomena of Caucasian Virgin Hair with Atomic Force Microscopy

Background and Objectives: Atomic force microscopy (AFM) as a type of scanning microscopy (SPM), which has a resolution of fractions of a nanometer on the atomic scale, is widely used in materials science. To date, research using AFM in medicine has focused on neurodegenerative diseases, osteoporosis, cancer tumors, cell receptors, proteins and the DNA mismatch repair (MMR) system. Only a few small studies of hair imaging have been conducted, mostly in biotechnology or cosmetology. Thanks to the possibilities offered by AFM imaging, dermatologists can non-invasively assess the condition of hair and its possible disorders. Our goal was to capture images and microscopically analyze morphological changes in the surface of healthy hair. Materials and Methods: In this study, three to five hairs were collected from each person. Each hair was examined at nine locations (0.5; 1.0; 1.5; 2.0; 3.5; 4.5; 5.5; 6.5 and 7.0 cm from the root). At least 4 images (4-10 images) were taken at each of the 9 locations. A total of 496 photos were taken and analyzed. Metric measurements of hair scales, such as apparent length, width and scale step height, were taken. Results: This publication presents the changes occurring in hair during the natural delamination process. In addition, morphoological changes visualized on the surface of healthy hair (pitting, oval indentations, rod-shaped macro-fibrillar elements, globules, scratches, wavy edge) are presented. A quantitative analysis of the structures found was carried out. Conclusions: The findings of this study can be used in further research and work related to the subject of human hair. They can serve as a reference for research on scalp and hair diseases, as well as hair care.

Recent Progress in Hair Science and Trichology

Hair is important to our appearance as well as to protect our heads. Human hair mainly consists of proteins (80-85%), melanin pigments (0-5%), water (10-13%), and lipids (1-6%). The physicochemical properties of hair have been studied for over 100 years. However, they are not yet thoroughly understood. In this review, recent progress and the latest findings are summarized from the following three perspectives: structural characteristics, delivery and distribution of active ingredients, and hair as a template. The structural characteristics of hair have been mainly investigated by microscopic and/or spectroscopic techniques such as atomic force microscopy integrated with infrared spectroscopy (AFM-IR) and rheological measurements. The distribution of active ingredients has been generally evaluated through techniques such as nanoscale secondary ion mass spectrometry (NanoSIMS). And finally, attempts to explore the potential of hair to be used as a substrate for flexible device fabrication will be introduced.

Photoinduced force microscopy as a novel method for the study of microbial nanostructures

A detailed comparison of the capabilities of electron microscopy and nano-infrared (IR) microscopy for imaging microbial nanostructures has been carried out for the first time. The surface sensitivity, chemical specificity, and non-destructive nature of spectroscopic mapping is shown to offer significant advantages over transmission electron microscopy (TEM) for the study of biological samples. As well as yielding important topographical information, the distribution of amides, lipids, and carbohydrates across cross-sections of bacterial (Escherichia coli, Staphylococcus aureus) and fungal (Candida albicans) cells was demonstrated using PiFM. The unique information derived from this new mode of spectroscopic mapping of the surface chemistry and biology of microbial cell walls and membranes, may provide new insights into fungal/bacterial cell function as well as having potential use in determining mechanisms of antimicrobial resistance, especially those targeting the cell wall.

AFM-IR for Nanoscale Chemical Characterization in Life Sciences: Recent Developments and Future Directions

Despite the ubiquitous absorption of mid-infrared (IR) radiation by virtually all molecules that belong to the major biomolecules groups (proteins, lipids, carbohydrates, nucleic acids), the application of conventional IR microscopy to the life sciences remained somewhat limited, due to the restrictions on spatial resolution imposed by the diffraction limit (in the order of several micrometers). This issue is addressed by AFM-IR, a scanning probe-based technique that allows for chemical analysis at the nanoscale with resolutions down to 10 nm and thus has the potential to contribute to the investigation of nano and microscale biological processes. In this perspective, in addition to a concise description of the working principles and operating modes of AFM-IR, we present and evaluate the latest key applications of AFM-IR to the life sciences, summarizing what the technique has to offer to this field. Furthermore, we discuss the most relevant current limitations and point out potential future developments and areas for further application for fruitful interdisciplinary collaboration.

Nanoindentation study of human fingernail for determining its structural elasticity

BACKGROUND

Human nails play an important role in transmitting force to the fingertips, and their mechanical properties are important indices. The nail has a three-layered structure consisting of top dorsal, middle intermediate, and under ventral plates, and its internal structure is believed to affect its mechanical properties. However, this has not been investigated in previous studies.

METHODS

The Young's moduli of the top, middle, and under plates were measured using nanoindentation, and a theoretical model was developed to estimate the structural elasticity for the bending deformation of human nails, which is an index describing the deformability of the nail without depending on its external dimensions. The structural elasticity of human nails was compared with that of human hair collected from the same person. The effect of the softening treatment on the nails was also evaluated.

RESULTS

The Young's moduli of the top, middle, and under plates measured using nanoindentation were 2.9, 3.1, and 2.8 GPa, respectively. The structural elasticity of the nail was estimated to be 2.9 GPa, approximately 75% that of hair. Moreover, softening treatment with a urea cream reduced the structural elasticity of the nail to 70%.

CONCLUSION

This paper proposed a method for estimating the structural elasticity of a human nail with a three-layered structure. This index is a mechanical property with "Pa" as a unit, and is useful for comparing deformability with the Young's modulus of other homogeneous materials or for investigating the effect of various treatments quantitatively.

Super-resolution infrared microspectroscopy reveals heterogeneous distribution of photosensitive lipids in human hair medulla

Human hair medulla chemical composition appears mostly homogenous when mapped by FTIR microspectroscopy even when using a synchrotron radiation source (SR-μFTIR) but it is expected to be heterogeneous. We performed sub-micron chemical mapping of hair cortex and medullas using Optical Photothermal Infrared microspectroscopy (OPTIR) and a mid-infrared Quantum Cascade Laser (QCL) source covering the fingerprint and the CH stretching region. Photodamages were observed in the hair cortex at mild laser power and occurred in the hair medulla even at the lowest power settings of the IR QCL pulsed at 100 kHz rate (4 μW/μm² average power density) and visible probe laser (200 μw/μm² average power density). Photoconversion of calcium carboxylates in other molecules, possibly sodium carboxylates, was observed. Attenuation of the IR QCL power by 40% using ZnSe filter and/or high-speed measurements (1000 cm^-1/s) succeeded in almost completely eliminating the photodamages and photoconversion. OPTIR maps and images showed that the medullas were highly heterogeneous at the submicron scale. We found calcium carboxylates, aliphatic lipids and wax esters in small units, hundreds of nanometers in size. The 1470 cm^-1 CO sym stretching peak of calcium carboxylates and the CH₂asym stretching peak from aliphatic lipids proved to be the most efficient peaks to track the distribution of these molecules. OPTIR had enough sensitivity to map accurately only the strongest peaks from lipids and calcium carboxylates, weaker peaks such as the ester CO and sulfoxide SO bands were not accurately detected by OPTIR even when they were shown to be present by SR-μFTIR. Quantification of the medulla components by OPTIR is difficult due to several factors: discontinuous QCL emission, and noise. The weaker peaks such as CH₃, CO, SO are often underestimated or not detected. We demonstrate here that OPTIR can be used to measure, map and image dark, photosensitive samples using very low IR power.

Selective IR super-resolution imaging of β-keratins at the bulk or interface in feather detected by using a nonlinear optical process

We developed the new IR super-resolution microscope by using a 4-wave mixing (4-wave), which is a third-order nonlinear optical process, and carried out the IR super-resolution imaging of the cross section of the rachis of an avian feather. We clearly observed strong signals in the entire region of the rachis at the amide I vibration of β-keratin in both of the XXYY and YYXX polarization combination. These results are different from images detected by using the vibrational sum-frequency generation (VSFG) method. While the VSFG imaging detects molecules only from the interface, the 4-wave method enables us to observe the signal from the bulk area. We concluded that the four repeating units of β-keratins in the bulk area which are suggested by X-ray diffraction studies are visualized in the 4-wave detected method. We also applied two IR super-resolution microscopies for the barb and discuss the site dependence of the orientation, distribution and concentration of β-keratin.

Probing the Nanoscale Heterogeneous Mixing in a High-Performance Polymer Blend

The blend of polyetheretherketone (PEEK) and polybenzimidazole (PBI) produces a high-performance blend (PPB) that is a potential replacement material in several industries due to its high temperature stability and desirable tribological properties. Understanding the nanoscale structure and interface of the two domains of the blend is critical for elucidating the origin of these desirable properties. Whilst achieving the physical characterisation of the domain structures is relatively uncomplicated, the elucidation of structures at the interface presents a significant experimental challenge. In this work, we combine atomic force microscopy (AFM) with an IR laser (AFM-IR) and thermal cantilever probes (nanoTA) to gain insights into the chemical heterogeneity and extent of mixing within the blend structure for the first time. The AFM-IR and nanoTA measurements show that domains in the blend are compositionally different from those of the pure PEEK and PBI polymers, with significant variations observed in a transition region several microns wide in proximity to domain boundary. This strongly points to physical mixing of the two components on a molecular scale at the interface. The versatility intrinsic to the combined methodology employed in this work provides nano- and microscale chemical information that can be used to understand the link between properties of different length scales across a wide range of materials.

Site-specific variations in surface structure and Young's modulus of human hair surfaces at the nanometer scale as induced through bleach treatment

The effect of bleach treatments on the morphology and mechanical properties of hair surfaces was measured at the nanometer scale using atomic force microscopy. We used an ultrahigh-precision relocation technique to observe the variations in these properties at precise locations on hair surfaces in their virgin state and then after each of the two bleach treatments, to rule out position-dependent fluctuations. We demonstrate that statistically significant variations in roughness and Young's modulus are observed as a result of exposure to bleach, which is known to disrupt the disulfide linkage network throughout the fiber. The rate at which surface roughness changes increased with the number of treatments, with very little effect seen after 10 min, and an increase of up to 65% was observed after a further 10 min. The Young's modulus decreased by up to 40% after each treatment. We also investigate micropores and show that they are subsurface, but revealed through bleaching, and oriented along the direction of the hair shaft with a characteristic aspect ratio. This work demonstrates the profound effect bleaching has on the molecular structure of hair, which manifests as changes in morphology and stiffness, and this should be taken into account in the formulation of future hair-care products.