The effects of salivas on occlusal forces

The effects of a PDL analogue on occlusal contact forces

BACKGROUND

Previous bench-top studies examined the details of the mechanical environment of rigidly-fixed occluding teeth. It was demonstrated that during each chomp, contacting molar teeth experience in-occlusal-plane forces (F_lateral ) that are highly transient in magnitude and direction.

OBJECTIVES

The objectives of this study are to identify F_lateral behaviors that are attributable to the presence of a visco-elastic periodontal ligament (PDL) analogue, and to asses the necessity of incorporating it into future studies.

METHODS

A weighted maxillary molar denture tooth was lowered onto, and raised from, a matching mandibular molar 10 times. The latter was supported by a load cell that continuously measured F_lateral . For statistical purposes, the test was repeated with 21 (n = 21) different occlusal relationships obtained with 0.05 mm incremental shifts of the lower assembly.

RESULTS

Overall, the results are similar to those of rigid attachment but the details of the F_lateral profiles are very different.

CONCLUSION

The PDL plays a major role in the mechanical environment of occlusion, suggesting that, in general (not necessarily always), it should be integrated into studies of occlusion.

The combined effects of salivas and occlusal indicators on occlusal contact forces

BACKGROUND

Some occlusal detection products are designed for use on dry teeth, but this is not always achieved. Others are suited for dry and wet applications.

OBJECTIVE

The objective of this study is to assess the combined effects, on occlusal contact forces, of two previously studied affecting variables-occlusal detection products and saliva.

METHODS

We used a full-arch dentiform with three occlusal detection products (an articulating film, an articulation paper and T-Scan) in combination with human (HS) and an artificial saliva. The maxillary arch assembly, weighing ~54 N (the maximum bite force), was lowered onto (occlusion) and lifted off (disclusion) of the mandibular arch through 10 cycles by a mechanical testing machine. The forces and moments acting on the mandibular arch were continuously recorded by a load cell that supported it.

RESULTS

The maximum values of F_lateral (the in-occlusal plane component of the occlusal contact force) were analysed by occlusion/disclusion separately using one-way ANOVA, with factor for group type to identify the significant effect of salivas on products, effect of products, effect of salivas with products, effect of human saliva. A difference in occlusion and/or in disclusion was considered different. Statistical differences (P < 0.0001) in F_lateral were found in: dry product vs product + HS, dry product vs product + artificial saliva (with articulating film and T-Scan) and HS vs product + HS (with articulation paper and T-Scan).

CONCLUSION

All products were affected by the salivas, except articulation paper by artificial saliva.

Does the presence of an occlusal indicator product affect the contact forces between full dentitions?

Studies have explored occlusal marking interpretation, repeatability and accuracy. But, when an occlusion detection product is interposed between teeth, direct tooth-tooth occlusal contact relationships are replaced by tooth-material-tooth structures. Thus, the marks cannot reflect the original contacts. This has been shown for single tooth pair contacts. The purpose of this laboratory study was to similarly examine full dentitions. A dentiform was set into Class I centric occlusion with the mandible supported by a load cell. The maxillary arch was guided by precision slides. As the weighted (~52 N) upper assembly was lowered onto and raised off the mandibular arch, the loads on the mandible were measured. With and without (control) occlusal marking material, the steps were as follows: (cleaning - control 1 - material 1) … (cleaning - control 6 - material 6). The six materials were as follows: Accufilm I and II, Rudischhauser Thick and Thin, Hanel Articulating Silk and T-Scan. Then, the six sets of (cleaning - control - material) measurements were repeated with the mandibular assembly shifted, in turn, by 0·1 mm in the Anterior, Posterior, Right and Left directions. The five (Centric and four 0·1 mm shifted) occlusal relationships produced grossly different tooth-tooth (control) load profiles. And, in general, these controls were affected, in different ways, by the marking products. Among the five conventional products, the Rudischhausers fared the worst and the electronic T-Scan was an extreme outlier. Thus, in general, popular occlusal detection products alter the occlusal contact forces, and therefore, their markings cannot characterise the actual occlusion.