Comparison of the Accuracy of Image Registration Methods for Merging Optical Scan and Radiographic Data in Edentulous Jaws

Accuracy of manual and artificial intelligence-based superimposition of cone-beam computed tomography with digital scan data, utilizing an implant planning software: A randomized clinical study

OBJECTIVES

To investigate the accuracy of conventional and automatic artificial intelligence (AI)-based registration of cone-beam computed tomography (CBCT) with intraoral scans and to evaluate the impact of user's experience, restoration artifact, number of missing teeth, and free-ended edentulous area.

MATERIALS AND METHODS

Three initial registrations were performed for each of the 150 randomly selected patients, in an implant planning software: one from an experienced user, one from an inexperienced operator, and one from a randomly selected post-graduate student of implant dentistry. Six more registrations were performed for each dataset by the experienced clinician: implementing a manual or an automatic refinement, selecting 3 small or 3 large in-diameter surface areas and using multiple small or multiple large in-diameter surface areas. Finally, an automatic AI-driven registration was performed, using the AI tools that were integrated into the utilized implant planning software. The accuracy between each type of registration was measured using linear measurements between anatomical landmarks in metrology software.

RESULTS

Fully automatic-based AI registration was not significantly different from the conventional methods tested for patients without restorations. In the presence of multiple restoration artifacts, user's experience was important for an accurate registration. Registrations' accuracy was affected by the number of free-ended edentulous areas, but not by the absolute number of missing teeth (p < .0083).

CONCLUSIONS

In the absence of imaging artifacts, automated AI-based registration of CBCT data and model scan data can be as accurate as conventional superimposition methods. The number and size of selected superimposition areas should be individually chosen depending on each clinical situation.

Investigation on the application of digital guide templates guided dental implantation in China

BACKGROUND

The aim of this survey is to investigate the application of digital guide templates (DGTs) across China, and the views and attitudes of oral health professionals toward them.

METHODS

This survey was prepared, distributed, and collected by WJX. Chinese oral health professionals were invited to participate in it. The basic information of respondents, the application of DGTs, and the views and attitudes toward their status quo and development were statistically described. Chi-square test was used to evaluate the correlation between the basic information of respondents and the application of DGTs as well as the views and attitudes toward them.

RESULTS

A total of 276 questionnaires were collected, of which 273 were identified as valid. 269 (98.5%) respondents were dental clinical workers, 204 (74.7%) were dental clinical implant workers, and 152 (55.7%) had been engaged in the implant industry for more than five years. The chi-square test showed that working years were significantly correlated with the half-guided, tooth-supported, and mucosa-supported DGTs (P < 0.05); and professional backgrounds and working years presented significant differences in the views and attitudes toward the status quo and development of DGTs (P < 0.05). The questionnaires also made a preliminary investigation and evaluation on the factors influencing accuracy, indications, doctors' recommendations and relevant training.

CONCLUSION

Most respondents held a positive attitude toward the accuracy and development of DGTs. This survey can point out the direction for the improvement of DGTs, and provide a reference for the study of factors affecting implant accuracy, the establishment of a training system, and the understanding of clinicians' current views on DGTs. Trial registration This survey was approved by the Ethics Review Committee of Chenghuaxinguanghua Dental Clinic (Approval NO. CDCIRB-D-2021-201).

Evaluation of different registration methods and dental restorations on the registration duration and accuracy of cone beam computed tomography data and intraoral scans: a retrospective clinical study

OBJECTIVES

To evaluate whether the accuracy and duration of registration for cone beam computed tomography (CBCT) and intraoral scans differ according to the method of registration and ratio of dental restorations to natural teeth.

MATERIALS AND METHODS

CBCT data and intraoral scans of eligible patients were grouped as follows according to the ratio of the number of dental restorations to the number of natural teeth (N): group 1, N = 0%; group 2, 0% < N < 50%; group 3, 50% ≤ N < 100%; and group 4, 100% ≤ N. Marker-free registration was performed with a deep learning-based platform and four implant planning software with different registration methods (two point-based, one surface-based, and one manual registration software) by a single operator, and the time consumption was recorded. Registration accuracy was evaluated by measuring the distances between the three-dimensional models of CBCT data and intraoral scans.

RESULTS

A total of 36 patients, one jaw per patient, were enrolled. Although registration accuracy was similar, the time consumed for registration significantly differed for the different methods. The deep learning-based registration method consumed the least time. Greater proportions of dental restorations significantly reduced the registration accuracy for semi-automatic and deep learning-based methods and reduced the time consumed for semi-automatic registration.

CONCLUSIONS

No superiority in registration accuracy was found. The proportion of dental restorations significantly affects the accuracy and duration of registration for CBCT data and intraoral scans.

CLINICAL TRIAL REGISTRATION

ClinicalTrials.gov Identifier: KCT0006710 CLINICAL RELEVANCE: Registration accuracy for virtual implant planning decreases when the proportion of dental restorations increases regardless of registration methods.

Comparison of Dental Surface Image Registration and Fiducial Marker Registration: An In Vivo Accuracy Study of Static Computer-Assisted Implant Surgery

This study compared the accuracy of static computer-assisted implant surgery (sCAIS) planned through dental surface image registration and fiducial marker registration. Stone models of 30 patients were converted into digital dental casts by using a desktop scanner. Cone-beam computed tomography (CBCT) was performed and superimposed to the digital dental casts with two methods: matching the dental surface images or matching the fiducial markers on a stereolithographic radiographic template. Following the implant planning, stereolithographic surgical guides were fabricated, and 56 fully guided implants were inserted by the same doctor. Deviations between planned and inserted implants were measured and compared using postoperative CBCT images. After adjustment for other potential influencing factors, compared with the fiducial marker registration group, significantly larger mean lateral deviations were noted in the dental surface registration group at both the implant platform and apex (p = 0.0188 and 0.0371, respectively). However, the mean lateral deviations for the dental surface registration (0.83 ± 0.51 mm at implant platform and 1.24 ± 0.68 mm at implant apex) were comparable to the literature. In conclusion, our findings indicate that although sCAIS planned using dental surface image registration was not statistically as accurate as that using fiducial marker registration, its accuracy was satisfactory for clinical use.

Effects of Exposure Parameters and Voxel Size for Cone-Beam Computed Tomography on the Image Matching Accuracy with an Optical Dental Scan Image: An In Vitro Study

This study is aimed at assessing the effects of exposure parameters and voxel size for cone-beam computed tomography (CBCT) on the image matching accuracy with an optical dental scan image. CBCT and optical scan images of a dry human mandible were obtained. Different CBCT settings were used: tube voltage, 60, 80, and 100 kVp; tube current, 6 and 8 mA; and voxel size, 100, 200, and 300 μm. Image matching between the CBCT and optical scan images was performed using implant planning software by dental professionals (n = 18). The image matching accuracy in each combination of CBCT settings was evaluated by assessing the linear discrepancy between the three-dimensionally reconstructed radiological image and the registered optical scan image using an image analysis software program. The Kruskal-Wallis test and a post hoc Mann–Whitney U test with Bonferroni correction were used to compare the accuracy of image registration between the groups (α = 0.05). Overall, the image matching accuracy was not significantly different between tube voltage and current settings; however, significantly higher image registration errors were found at the combination of 100 kVp tube voltage/8 mA tube current (F = 8.44, P < 0.001). Changes in voxel sizes did not significantly interfere with the image registration results. No interaction was found among voltage, current, and voxel size in terms of image registration accuracy (F = 2.022, P = 0.091). Different exposure parameter settings in tube voltage and tube current did not significantly influence the image matching accuracy between CBCT and optical dental scan images; however, a high radiation dose could be inappropriate. The image matching accuracy was not significantly affected by changing the voxel sizes of CBCT.