Engineering three-dimensional constructs of the periodontal ligament in hyaluronan-gelatin hydrogel films and a mechanically active environment

Periodontal ligament-associated protein-1 engages in teeth overeruption and periodontal fiber disorder following occlusal hypofunction

BACKGROUND AND OBJECTIVE

Teeth overeruption is a problem of clinical significance, but the underlying mechanism how changes in external occlusal force convert to the periodontium remodeling signals has been a largely under explored domain. And recently, periodontal ligament-associated protein-1 (PLAP-1)/asporin was found to play a pivotal role in maintaining periodontal homeostasis. The aim of this study was to explore the function of PLAP-1 in the periodontally hypofunctional tissue turnover.

METHODS

After extracting left maxillary molars in mice, the left and right mandibular molars were distributed into hypofunction group (HG) and control group (CG), respectively. Mice were sacrificed for radiographic, histological, and molecular biological analyses after 1, 4 and 12 weeks. In vitro, dynamic compression was applied using Flexcell FX-5000 Compression System to simulate intermittent occlusal force. The expression of PLAP1 in loaded and unloaded human periodontal ligament cells (hPDLCs) was compared, and its molecular biological effects were further explored by small interfering RNA (siRNA) targeting PLAP1.

RESULTS

In vivo, fiber disorder in periodontal ligament (PDL), bone apposition at furcation regions, and bone resorption in alveolar bone were illustrated in the HG compared with the CG. In addition, PLAP-1 positive area decreased significantly in PDL following occlusal unloading. In vitro, the loss of compressive loading relatively downregulated PLAP1 expression, which was essential to promote collagen I but inhibit osterix and osteocalcin expression in hPDLCs.

CONCLUSIONS

PLAP-1 presumably plays a pivotal role in occlusal force-regulated periodontal homeostasis by facilitating collagen fiber synthesis in hPDLCs and suppressing excessive osteoblast differentiation, further preventing teeth from overeruption. Further evidence in PLAP-1 conditional knockout mice is needed.

Challenges of Periodontal Tissue Engineering: Increasing Biomimicry through 3D Printing and Controlled Dynamic Environment

In recent years, tissue engineering studies have proposed several approaches to regenerate periodontium based on the use of three-dimensional (3D) tissue scaffolds alone or in association with periodontal ligament stem cells (PDLSCs). The rapid evolution of bioprinting has sped up classic regenerative medicine, making the fabrication of multilayered scaffolds-which are essential in targeting the periodontal ligament (PDL)-conceivable. Physiological mechanical loading is fundamental to generate this complex anatomical structure ex vivo. Indeed, loading induces the correct orientation of the fibers forming the PDL and maintains tissue homeostasis, whereas overloading or a failure to adapt to mechanical load can be at least in part responsible for a wrong tissue regeneration using PDLSCs. This review provides a brief overview of the most recent achievements in periodontal tissue engineering, with a particular focus on the use of PDLSCs, which are the best choice for regenerating PDL as well as alveolar bone and cementum. Different scaffolds associated with various manufacturing methods and data derived from the application of different mechanical loading protocols have been analyzed, demonstrating that periodontal tissue engineering represents a proof of concept with high potential for innovative therapies in the near future.

Influence of Materials Properties on Bio-Physical Features and Effectiveness of 3D-Scaffolds for Periodontal Regeneration

Periodontal diseases are multifactorial disorders, mainly due to severe infections and inflammation which affect the tissues (i.e., gum and dental bone) that support and surround the teeth. These pathologies are characterized by bleeding gums, pain, bad breath and, in more severe forms, can lead to the detachment of gum from teeth, causing their loss. To date it is estimated that severe periodontal diseases affect around 10% of the population worldwide thus making necessary the development of effective treatments able to both reduce the infections and inflammation in injured sites and improve the regeneration of damaged tissues. In this scenario, the use of 3D scaffolds can play a pivotal role by providing an effective platform for drugs, nanosystems, growth factors, stem cells, etc., improving the effectiveness of therapies and reducing their systemic side effects. The aim of this review is to describe the recent progress in periodontal regeneration, highlighting the influence of materials' properties used to realize three-dimensional (3D)-scaffolds, their bio-physical characteristics and their ability to provide a biocompatible platform able to embed nanosystems.

Chemokine C-C motif ligand 8 in periodontal ligament during orthodontic tooth movement

OBJECTIVES

To investigate the roles of chemokine (C-C motif) ligand 8 (CCL8) in periodontal ligament during orthodontic tooth movement (OTM).

METHODS

Bioinformatics analyzed 100 genes in human periodontal ligament cells that were most upregulated after 48 hours of mechanical stress, and these genes were classified through GO and KEGG databases. Nickel-titanium closed-coil springs were placed between right first molar and incisors to produce 20 cN of orthodontic force in eight-week-old male SD rats for 1 and 2 days, followed by immunohistochemical staining of CCL8. Human periodontal ligament fibroblasts (hPDLFs) were stimulated by 14% cyclic tension force (Flexcell FX-5000 T Tension System) or hypoxia conditions to mimic OTM for 1 and 2 days, then the resulting CCL8 were examined through ELISA. Scratching assay was performed by treating hPDLFs with different concentrations of CCL8 (1 ng/ml, 10 ng/ml, 100 ng/ml). The migration, proliferation, and adhesion abilities of 100 ng/ml CCL8-treated hPDLFs were also examined. qRT-PCR and western blot detected matrix metalloproteinase 3, periostin, and osteoprotegrin expressions of hPDLFs under 100 ng/ml CCL8.

RESULTS

Bioinformatic analysis demonstrated that CCL8 was upregulated after applying mechanical stress for 48 hours. CCL8 secretion showed upregulation after 24 hours of OTM applicationsin vivo and in vitro. CCL8-treated hPDLFs showed significant positive effects on cell proliferation and matrix metalloproteinase 3. It also inhibited periostin and osteoprotegrin expressions.

CONCLUSIONS

CCL8 was upregulated in periodontal ligament during initial stage of OTM. Although CCL8 in human periodontal ligaments showed no significant effects on cell migration ability, it did enhance cell proliferation and osteoclastogenesis.

An in-vitro mechanical strain three-dimensional culture model: periodontal ligament cell viability, apoptosis, and endoplasmic reticulum stress response

To develop a model to investigate a potential relationship between mechanical strain, cell responses, and endoplasmic reticulum stress in periodontal ligament (PDL) cells, primary PDL cell cultures were obtained from extracted premolars. Cells were cultured in hydrogel and subjected to 24 h of static mechanical strain, resulting in 18% dimensional substrate elongation. Cell viability, caspase-3/7 activity, and mRNA levels for 28 genes, including unfolded protein response (UPR)-related and mechanically responsive genes, serving as positive controls for stress induction, were examined. Compared with unstrained cultures, no difference in caspase activity was observed; however, viability responses differed between cell lines. Multiple UPR-related genes were differentially upregulated, with marginal statistical significance, including cAMP responsive element binding protein 3 like 3 (CREB3L3) (mean fold-regulation = 1.91), an adenosine monophosphate-dependent transcription factor with roles in UPR activation and the acute inflammatory response; and the pro-apoptotic UPR gene, endoplasmic reticulum to nucleus signaling 2 (ERN2) (mean fold-regulation = 4.01). The observed effect on cell viability following strain with no change in caspase activity suggests that reduction in viability may be mediated via caspase-3/7-independent mechanisms. Three-dimensional mechanical strain PDL cell culture models offer a method to study the role of endoplasmic reticulum stress and UPR, and provide a framework and potential UPR targets for future investigations.

VDAC1 is essential for neurite maintenance and the inhibition of its oligomerization protects spinal cord from demyelination and facilitates locomotor function recovery after spinal cord injury

During the progression of the neurodegenerative process, mitochondria participates in several intercellular signaling pathways. Voltage-dependent anion-selective channel 1 (VDAC1) is a mitochondrial porin involved in the cellular metabolism and apoptosis intrinsic pathway in many neuropathological processes. In spinal cord injury (SCI), after the primary cell death, a secondary response that comprises the release of pro-inflammatory molecules triggers apoptosis, inflammation, and demyelination, often leading to the loss of motor functions. Here, we investigated the functional role of VDAC1 in the neurodegeneration triggered by SCI. We first determined that in vitro targeted ablation of VDAC1 by specific morpholino antisense nucleotides (MOs) clearly promotes neurite retraction, whereas a pharmacological blocker of VDAC1 oligomerization (4, 4′-diisothiocyanatostilbene-2, 2′-disulfonic acid, DIDS), does not cause this effect. We next determined that, after SCI, VDAC1 undergoes conformational changes, including oligomerization and N-terminal exposition, which are important steps in the triggering of apoptotic signaling. Considering this, we investigated the effects of DIDS in vivo application after SCI. Interestingly, blockade of VDAC1 oligomerization decreases the number of apoptotic cells without interfering in the neuroinflammatory response. DIDS attenuates the massive oligodendrocyte cell death, subserving undisputable motor function recovery. Taken together, our results suggest that the prevention of VDAC1 oligomerization might be beneficial for the clinical treatment of SCI.

Innate Immune Response of Human Embryonic Stem Cell-Derived Fibroblasts and Mesenchymal Stem Cells to Periodontopathogens

Periodontitis involves complex interplay of bacteria and host immune response resulting in destruction of supporting tissues of the tooth. Toll-like receptors (TLRs) play a role in recognizing microbial pathogens and eliciting an innate immune response. Recently, the potential application of multipotent stem cells and pluripotent stem cells including human embryonic stem cells (hESCs) in periodontal regenerative therapy has been proposed. However, little is known about the impact of periodontopathogens on hESC-derived progenies. This study investigates the effects of heat-killed periodontopathogens, namely, Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans, on TLR and cytokine expression profile of hESC-derived progenies, namely, fibroblasts (hESC-Fib) and mesenchymal stem cells (hESC-MSCs). Additionally, the serotype-dependent effect of A. actinomycetemcomitans on hESC-derived progenies was explored. Both hESC-Fib and hESC-MSCs constitutively expressed TLR-2 and TLR-4. hESC-Fib upon exposure to periodontopathogens displayed upregulation of TLRs and release of cytokines (IL-1β, IL-6, and IL-8). In contrast, hESC-MSCs were largely nonresponsive to bacterial challenge, especially in terms of cytokine production. Further, exposure of hESC-Fib to A. actinomycetemcomitans serotype c was associated with higher IL-8 production than serotype b. In contrast, the hESC-MSCs displayed no serotype-dependent response. Differential response of the two hESC progenies implies a phenotype-dependent response to periodontopathogens and supports the concept of immunomodulatory properties of MSCs.

Fabrication and evaluation of electrohydrodynamic jet 3D printed polycaprolactone/chitosan cell carriers using human embryonic stem cell-derived fibroblasts

Biological function of adherent cells depends on the cell–cell and cell–matrix interactions in three-dimensional space. To understand the behavior of cells in 3D environment and their interactions with neighboring cells and matrix requires 3D culture systems. Here, we present a novel 3D cell carrier scaffold that provides an environment for routine 3D cell growth in vitro. We have developed thin, mechanically stable electrohydrodynamic jet (E-jet) 3D printed polycaprolactone and polycaprolactone/Chitosan macroporous scaffolds with precise fiber orientation for basic 3D cell culture application. We have evaluated the application of this technology by growing human embryonic stem cell-derived fibroblasts within these 3D scaffolds. Assessment of cell viability and proliferation of cells seeded on polycaprolactone and polycaprolactone/Chitosan 3D-scaffolds show that the human embryonic stem cell-derived fibroblasts could adhere and proliferate on the scaffolds over time. Further, using confocal microscopy we demonstrate the ability to use fluorescence-labelled cells that could be microscopically monitored in real-time. Hence, these 3D printed polycaprolactone and polycaprolactone/Chitosan scaffolds could be used as a cell carrier for in vitro 3D cell culture-, bioreactor- and tissue engineering-related applications in the future.

A chitosan-hyaluronic acid hydrogel scaffold for periodontal tissue engineering

The current challenge in treating periodontitis is regenerating the periodontium. This motivates tissue-engineering researchers to develop scaffolds as artificial matrices that give mechanical support for osteoblasts, cementoblasts, gingival and periodontal ligament fibroblast cells. In this study, modified hyaluronic acid (HA) and chitosan (CS) were employed to create a hybrid CS-HA hydrogel scaffold for periodontal regeneration. CS, HA, and CS-HA scaffolds were obtained by freeze-drying technique, resulting in porous structures suitable for use in tissue engineering. Scaffolds were submitted to gamma and UV-sterilization without significant morphology changes. The ATR-FTIR spectra of CS-HA hydrogels showed peaks at 377 cm^-1 , 1566 cm^-1 , and 1614 cm^-1 , representing secondary amide, primary amine, and carboxyl acid respectively, and it was also observed the emergence of peaks at 886 cm^-1 , which probably represents the Schiff base formed in the case of hybrid CS-HA hydrogels. The scaffolds presented a high rate of PBS uptake, reaching values higher than 95%. Thermal degradation of HA scaffolds was around 225°C and CS was around 285°C. The ATR-FTIR spectra and swelling degree were slightly disturbed mainly after gamma sterilization, but degradation temperature did not change after sterilization. The performance of the CS-HA hydrogel scaffolds for in vitro cell culture was tested using NIH3T3 and MG63 cell lines. The Alamar Blue test showed a significant increase in cellular viability and high CD44 expression, suggesting that the cells migrated more when seeded onto the scaffolds. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1691-1702, 2016.

Adhesion and proliferation of human periodontal ligament cells on poly(2-methoxyethyl acrylate)

Human periodontal ligament (PDL) cells obtained from extracted teeth are a potential cell source for tissue engineering. We previously reported that poly(2-methoxyethyl acrylate) (PMEA) is highly biocompatible with human blood cells. In this study, we investigated the adhesion, morphology, and proliferation of PDL cells on PMEA and other types of polymers to design an appropriate scaffold for tissue engineering. PDL cells adhered and proliferated on all investigated polymer surfaces except for poly(2-hydroxyethyl methacrylate) and poly[(2-methacryloyloxyethyl phosphorylcholine)-co-(n-butyl methacrylate)]. The initial adhesion of the PDL cells on PMEA was comparable with that on polyethylene terephthalate (PET). In addition, the PDL cells on PMEA spread well and exhibited proliferation behavior similar to that observed on PET. In contrast, platelets hardly adhered to PMEA. PMEA is therefore expected to be an excellent scaffold for tissue engineering and for culturing tissue-derived cells in a blood-rich environment.

Cell survival and gene expression under compressive stress in a three-dimensional in vitro human periodontal ligament-like tissue model

This study investigated cell survival and gene expression under various compressive stress conditions mimicking orthodontic force by using a newly developed in vitro model of human periodontal ligament-like tissue (HPdLLT). The HPdLLT was developed by three-dimensional culturing of human periodontal ligament fibroblasts in a porous poly-L-lactide matrix with threefold increased culture media permeability due to hydrophilic modification. In vitro HPdLLTs in experimental groups were subjected to 5, 15, 25 and 35 g/cm(2) compressive stress for 1, 3, 7 or 14 days; controls were cultured over the same periods without compressive stress. Cell morphology and cell apoptosis in the experimental and control groups were investigated using scanning electron microscopy and caspase-3/7 detection. Real-time polymerase chain reaction was performed for seven osteogenic and osteoclastic genes. Similar extracellular matrix and spindle-shaped cells were observed inside or on the surface of in vitro HPdLLTs, with no relation to compressive stress duration or intensity. Similar caspase-3/7 activity indicating comparable apoptosis levels was observed in all samples. Receptor activator of nuclear factor kappa-B ligand and bone morphogenetic protein 2 genes showed characteristic "double-peak" expression at 15 and 35 g/cm(2) on day 14, and alkaline phosphatase and periodontal ligament-associated protein 1 expression peaked at 5 g/cm(2) on day 14; other genes also showed time-dependent and load-dependent expression patterns. The in vitro HPdLLT model system effectively mimicked the reaction and gene expression of the human periodontal ligament in response to orthodontic force. This work provides new information on the effects of compressive stress on human periodontal ligament tissue.

Surface Entrapment of Fibronectin on Electrospun PLGA Scaffolds for Periodontal Tissue Engineering

Nowadays, the challenge in the tissue engineering field consists in the development of biomaterials designed to regenerate ad integrum damaged tissues. Despite the current use of bioresorbable polyesters such as poly(l-lactide) (PLA), poly(d,l-lactide-co-glycolide) (PLGA), and poly-ɛ-caprolactone in soft tissue regeneration researches, their hydrophobic properties negatively influence the cell adhesion. Here, to overcome it, we have developed a fibronectin (FN)-functionalized electrospun PLGA scaffold for periodontal ligament regeneration. Functionalization of electrospun PLGA scaffolds was performed by alkaline hydrolysis (0.1 or 0.01 M NaOH). Then, hydrolyzed scaffolds were coated by simple deposition of an FN layer (10 μg/mL). FN coating was evidenced by X-ray photoelectron analysis. A decrease of contact angle and greater cell adhesion to hydrolyzed, FN-coated PLGA scaffolds were noticed. Suitable degradation behavior without pH variations was observed for all samples up to 28 days. All treated materials presented strong shrinkage, fiber orientation loss, and collapsed fibers. However, functionalization process using 0.01 M NaOH concentration resulted in unchanged scaffold porosity, preserved chemical composition, and similar mechanical properties compared with untreated scaffolds. The proposed simplified method to functionalize electrospun PLGA fibers is an efficient route to make polyester scaffolds more biocompatible and shows potential for tissue engineering.