Effect of the combined use of enamel matrix derivative and atelocollagen sponge scaffold on osteoblastic differentiation of mouse induced pluripotent stem cells in vitro

Enamel matrix derivative (EMD) enhances the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs)

To investigate the EMD's capacity in BMSCs osteogenic differentiation. In vivo and in vitro, BMSCs were treated with EMD, scanning electron microscopy, and Alizarin Red staining were used to detect the changes in the osteogenic ability of BMSCs, and the proliferation ability of BMSCs was evaluated by CCK8. In addition, by adding xav939, a typical inhibitor of Wnt/β-catenin signaling pathway, the regulatory function of Wnt/β-catenin signaling was clarified. The results showed that EMD promote cell proliferation and 25 μg/ml EMD had the most significant effect. Cells inducing osteogenesis for 2 and 3 even 4 weeks, the cell staining is deeper in EMD treated group than that of the control (P < 0.05) by alizarin Red staining, suggesting more mineralization of BMSCs. In vivo implanting the titanium plate wrapped with 25 μg/ml EMD treated-BMSC film into nude mice for 8 weeks, more nodules were formed on the surface of the titanium plate than that the control (P < 0.05). HE showed that there is a little blue-violet immature bone-like tissue block. Besides, the expression of RUNX Family Transcription Factor 2 (Runx2), Osterix, Osteocalcin (OCN), collagen I (COLI), alkaline phosphatase (ALP) and β-catenin were inhibited in xav939 group (P < 0.05); Inversely, all were activated in EMD group (P < 0.05). In conclusion, EMD promoted the proliferation and osteogenic differentiation of BMSCs. EMD's function on BMSCs might be associated with the Wnt/β-catenin signaling pathway.

Elements of 3D Bioprinting in Periodontal Regeneration: Frontiers and Prospects

Periodontitis is a chronic infectious disease worldwide, caused by the accumulation of bacterial plaque, which can lead to the destruction of periodontal supporting tissue and eventually tooth loss. The goal of periodontal treatment is to remove pathogenic factors and control the periodontal inflammation. However, the complete regeneration of periodontal supporting tissue is still a major challenge according to current technology. Tissue engineering recovers the injured tissue through seed cells, bio-capable scaffold and bioactive factors. Three-D-bioprinting is an emerging technology in regeneration medicine/tissue engineering, because of its high accuracy and high efficiency, providing a new strategy for periodontal regeneration. This article represents the materials of 3D bioprinting in periodontal regeneration from three aspects: oral seed cell, bio-scaffold and bio-active factors.

Cold Atmospheric Plasma Promotes Regeneration-Associated Cell Functions of Murine Cementoblasts In Vitro

The aim of the study was to examine the efficacy of cold atmospheric plasma (CAP) on the mineralization and cell proliferation of murine dental cementoblasts. Cells were treated with CAP and enamel matrix derivates (EMD). Gene expression of alkaline phosphatase (ALP), bone gamma-carboxyglutamate protein (BGLAP), periostin (POSTN), osteopontin (OPN), osterix (OSX), collagen type I alpha 1 chain (COL1A1), dentin matrix acidic phosphoprotein (DMP)1, RUNX family transcription factor (RUNX)2, and marker of proliferation Ki-67 (KI67) was quantified by real-time PCR. Protein expression was analyzed by immunocytochemistry and ELISA. ALP activity was determined by ALP assay. Von Kossa and alizarin red staining were used to display mineralization. Cell viability was analyzed by XTT assay, and morphological characterization was performed by DAPI/phalloidin staining. Cell migration was quantified with an established scratch assay. CAP and EMD upregulated both mRNA and protein synthesis of ALP, POSTN, and OPN. Additionally, DMP1 and COL1A1 were upregulated at both gene and protein levels. In addition to upregulated RUNX2 mRNA levels, treated cells mineralized more intensively. Moreover, CAP treatment resulted in an upregulation of KI67, higher cell viability, and improved cell migration. Our study shows that CAP appears to have stimulatory effects on regeneration-associated cell functions in cementoblasts.

Enamel matrix derivative promotes new bone formation in xenograft assisted maxillary anterior ridge preservation-A randomized controlled clinical trial

OBJECTIVES

To compare the effectiveness of deproteinized bovine bone mineral with 10% collagen alone (DBBMC) or with enamel matrix derivative (DBBMC-EMD) in ridge preservation.

METHODS

42 maxillary anterior teeth were extracted and received either a DBBMC (control) or DBBMC-EMD (test) treatment protocol. CBCT taken before and 4 months after the extraction procedure was used to measure changes in alveolar ridge width (RW), buccal bone height (BH) and palatal bone height (PH). Bone cores were harvested during implant osteotomy preparation, and the samples processed histomorphometrically to assess the fraction of new bone (%NB), residual graft (%RG) and soft tissue matrix (%STM).

RESULTS

Overall, both treatment groups showed significant reductions in mean RW from baseline to 4 months after extraction, but no significant change in either mean BH or PH over this time. When CBCT measurements were analysed according to the initial thickness of the buccal wall (BT < 1 mm vs. BT ≥ 1 mm), significant reductions in all ridge dimensions (RW, BH and PH) were noted in the <1 mm BT group. Histomorphometrically, the DBBMC-EMD test group showed significantly increased new bone formation (%NB): (control = 16.5 ± 6.9% cf.; test = 45.1 ± 8.8%) with less residual graft (%RG): (control = 36.8 ± 8.8% cf.; test = 20.3 ± 7.2%) compared to the DBBMC control group.

CONCLUSIONS

Both DBBMC alone and DBBMC-EMD treated sites 4 months after extraction lost RW but showed no significant change in BH or PH. Irrespective of treatment, maxillary anterior teeth with thick initial buccal walls (≥1 mm) exhibited less alveolar ridge reduction 4 months after treatment. The addition of EMD to DBBMC resulted in more new bone formation in the test group.

Integrin α2β1 plays an important role in the interaction between human articular cartilage-derived chondrocytes and atelocollagen gel

Although atelocollagen gel is used as a scaffold for culturing human articular cartilage-derived chondrocytes, little is known about cell-gel interactions. In this study, we investigated the mechanism via which atelocollagen gel affects human articular cartilage-derived chondrocytes. Two types of three-dimensional cultures of human articular cartilage-derived chondrocytes (i.e., with and without atelocollagen gel) were compared. While the amount of atelocollagen gel in culture gradually decreased with time, it promoted the expression of matrix metalloproteinases (MMPs) during the early stages of culture. Genome-wide differential gene expression analysis revealed that cell membrane- and extracellular matrix-related genes were highly ranked among up- and down-regulated groups in cells cultured in the presence of atelocollagen gel. Among the integrin family of genes, the expression of integrin subunit alpha 2 and integrin subunit alpha 10 was significantly increased in the presence of atelocollagen gel. Blocking α2β1 integrin with the specific inhibitor BTT 3033 had a significant effect on cell proliferation, MMP expression, and cell shape, as well as on the response to mechanical stimulation. Taken together, our findings indicate that the α2β1 integrin pathway plays an important role in the interaction of atelocollagen gel with human articular cartilage-derived chondrocytes and may be a potential therapeutic target for articular cartilage disorders.

In Vivo Regeneration of Large Bone Defects by Cross-Linked Porous Hydrogel: A Pilot Study in Mice Combining Micro Tomography, Histological Analyses, Raman Spectroscopy and Synchrotron Infrared Imaging

The transplantation of engineered three-dimensional (3D) bone graft substitutes is a viable approach to the regeneration of severe bone defects. For large bone defects, an appropriate 3D scaffold may be necessary to support and stimulate bone regeneration, even when a sufficient number of cells and cell cytokines are available. In this study, we evaluated the in vivo performance of a nanogel tectonic 3D scaffold specifically developed for bone tissue engineering, referred to as nanogel cross-linked porous-freeze-dry (NanoCliP-FD) gel. Samples were characterized by a combination of micro-computed tomography scanning, Raman spectroscopy, histological analyses, and synchrotron radiation-based Fourier transform infrared spectroscopy. NanoCliP-FD gel is a modified version of a previously developed nanogel cross-linked porous (NanoCliP) gel and was designed to achieve highly improved functionality in bone mineralization. Spectroscopic imaging of the bone tissue grown in vivo upon application of NanoCliP-FD gel enables an evaluation of bone quality and can be employed to judge the feasibility of NanoCliP-FD gel scaffolding as a therapeutic modality for bone diseases associated with large bone defects.

Wound Healing and Cell Dynamics Including Mesenchymal and Dental Pulp Stem Cells Induced by Photobiomodulation Therapy: An Example of Socket-Preserving Effects after Tooth Extraction in Rats and a Literature Review

High-intensity laser therapy (HILT) and photobiomodulation therapy (PBMT) are two types of laser treatment. According to recent clinical reports, PBMT promotes wound healing after trauma or surgery. In addition, basic research has revealed that cell differentiation, proliferation, and activity and subsequent tissue activation and wound healing can be promoted. However, many points remain unclear regarding the mechanisms for wound healing induced by PBMT. Therefore, in this review, we present an example from our study of HILT and PBMT irradiation of tooth extraction wounds using two types of lasers with different characteristics (diode laser and carbon dioxide laser). Then, the effects of PBMT on the wound healing of bone tissues are reviewed from histological, biochemical, and cytological perspectives on the basis of our own study of the extraction socket as well as studies by other researchers. Furthermore, we consider the feasibility of treatment in which PBMT irradiation is applied to stem cells including dental pulp stem cells, the theme of this Special Issue, and we discuss research that has been reported on its effect.

Effects of intermittent treatment with parathyroid hormone (PTH) on osteoblastic differentiation and mineralization of mouse induced pluripotent stem cells in a 3D culture model

BACKGROUND/OBJECTIVES

PTH plays an important role in bone remodeling, and different actions have been reported depending on its administration method. iPSCs are promising as a cell source for regeneration of periodontal tissue due to their ability of proliferation and pluripotency. However, the effects of PTH on iPSCs remain mostly unknown. The purpose of this study was to investigate in vitro effects of parathyroid hormone (PTH) on osteoblastic differentiation of induced pluripotent stem cells (iPSCs) in a 3D culture model.

MATERIALS AND METHODS

Following embryoid body (EB) induction from mouse iPSCs (miPSCs), dissociated cells (miPS-EB-derived cells) were seeded onto atelocollagen sponge (ACS) in osteoblast differentiation medium (OBM). Cell-ACS constructs were divided into three groups: continuous treatment with human recombinant PTH (1-34) (PTH-C), intermittent PTH treatment (PTH-I) or OBM control. To confirm the expression of PTH receptor-1(PTH1R), the expression of Pth1r and cAMP production over time were assessed. Real-time PCR was used to assess the expression of genes encoding osterix (Sp7), runt-related transcription factor 2 (Runx2), collagen type 1 (Col1a1), and osteocalcin (Bglap) at different time points. Mineralization was assessed by von Kossa staining. Histochemical staining was used to analyze alkaline phosphatase (ALP) activity, and immunolocalization of SP7 and BGLAP was analyzed by confocal laser scanning microscopy (CLSM).

RESULTS

On days 7 and 14, expression of the Pth1r in miPS-EB-derived cells was increased in all groups. Production of cAMP, the second messenger of the PTH1R, tended to increase in the PTH-I group compared with PTH-C group on day 14. Expression of Col1a1 in the PTH-I group on day 14 was significantly higher than other groups. There was a time-dependent increase in the expression of Sp7 in all groups. On day 14, the expression level of Sp7 in the PTH-I group was significantly higher than other groups. In von Kossa staining, the PTH-I group showed higher level of staining compared with other groups on day 14, whereas the level was slightly attenuated in the PTH-C group. In histochemical staining, ALP-positive cells were significantly increased in the PTH-I group compared with other groups on day 14. In CLSM analysis, the numbers of SP7- and BGLAP-positive cells showed a gradual increase over time, and on day 14, a significantly greater SP7 expression was observed in the PTH-I group than other groups.

CONCLUSION

These results suggested that the intermittent PTH treatment promotes osteoblastic differentiation and mineralization of miPSCs in the ACS scaffold.

Utility of High-Intensity Laser Therapy Combined with Photobiomodulation Therapy for Socket Preservation After Tooth Extraction

Objective: High-intensity laser therapy (HILT) combined with photobiomodulation therapy (PBMT) using a diode or CO₂ laser was administered after extraction of the left first molar in rats. Effects on socket preservation (preservation of the alveolar bone and healing time after extraction) were evaluated histopathologically.

Background: Irradiation using a diode or CO₂ laser has been shown to hasten wound healing, but the effects remain controversial.

Methods: Five-week-old male Wistar rats that underwent extraction of the left maxillary first molar were divided into three groups: diode laser irradiation (diode group), CO₂ laser irradiation (CO₂ group), and no laser irradiation (control group). HILT (27 J) was performed immediately after tooth extraction to enhance blood coagulation, followed by PBMT (0.7 J) 1 day later to enhance healing. Tissues, including the extraction socket, were removed en bloc 3, 5, 7, 10, and 21 days postextraction to determine the morphological characteristics of wound healing and the distribution of myofibroblasts involved in scar formation.

Results: In the diode and CO₂ groups, new bone formation and cancellous bone maturation were observed at an early stage of wound healing. The number of myofibroblasts was significantly lower in the laser treatment groups than the control (p < 0.001), and both treatment groups had a significantly higher alveolar crest height (p < 0.01), with almost no concavity in the mucosa of the extraction wound.

Conclusions: Combined HILT and PBMT following tooth extraction hastened wound healing and preserved alveolar crest height, suggesting a role in socket preservation.

The Potential of Different Origin Stem Cells in Modulating Oral Bone Regeneration Processes

Tissue engineering has gained much momentum since the implementation of stem cell isolation and manipulation for regenerative purposes. Despite significant technical improvements, researchers still have to decide which strategy (which type of stem cell) is the most suitable for their specific purpose. Therefore, this short review discusses the advantages and disadvantages of the three main categories of stem cells: embryonic stem cells, mesenchymal stem cells and induced pluripotent stem cells in the context of bone regeneration for dentistry-associated conditions. Importantly, when deciding upon the right strategy, the selection needs to be made in concordance with the morbidity and the life-threatening level of the condition in discussion. Therefore, even when a specific type of stem cell holds several advantages over others, their availability, invasiveness of the collection method and ethical standards become deciding parameters.

Nanogel tectonic porous 3D scaffold for direct reprogramming fibroblasts into osteoblasts and bone regeneration

Transplantation of engineered three-dimensional (3D) bone tissue may provide therapeutic benefits to patients with various bone diseases. To achieve this goal, appropriate 3D scaffolds and cells are required. In the present study, we devised a novel nanogel tectonic material for artificial 3D scaffold, namely the nanogel-cross-linked porous (NanoCliP)-freeze-dried (FD) gel, and estimated its potential as a 3D scaffold for bone tissue engineering. As the osteoblasts, directly converted osteoblasts (dOBs) were used, because a large number of highly functional osteoblasts could be induced from fibroblasts that can be collected from patients with a minimally invasive procedure. The NanoCliP-FD gel was highly porous, and fibronectin coating of the gel allowed efficient adhesion of the dOBs, so that the cells occupied the almost entire surface of the walls of the pores after culturing for 7 days. The dOBs massively produced calcified bone matrix, and the culture could be continued for at least 28 days. The NanoCliP-FD gel with dOBs remarkably promoted bone regeneration in vivo after having been grafted to bone defect lesions that were artificially created in mice. The present findings suggest that the combination of the NanoCliP-FD gel and dOBs may provide a feasible therapeutic modality for bone diseases.