Heterotopic vascularization and functionalization of implantable bio engineered hepatic tissue alleviates liver injury in rats

A new paradigm in transplant immunology: At the crossroad of synthetic biology and biomaterials

Solid organ transplant (SOT) recipients require meticulously tailored immunosuppressive regimens to minimize graft loss and mortality. Traditional approaches focus on inhibiting effector T cells, while the intricate and dynamic immune responses mediated by other components remain unsolved. Emerging advances in synthetic biology and material science have provided novel treatment modalities with increased diversity and precision to the transplantation community. This review investigates the active interface between these two fields, highlights how living and non-living structures can be engineered and integrated for immunomodulation, and discusses their potential application in addressing the challenges in SOT clinical practice.

Orthotopic Transplantation of Functional Bioengineered Livers in Rats

Functional bioengineered livers (FBLs) are promising alternatives to orthotopic liver transplantation. However, orthotopic transplantation of FBLs has not yet been reported. This study aimed to perform the orthotopic transplantation of FBLs in rats subjected to complete hepatectomy. FBLs were developed using rat whole decellularized liver scaffolds (DLSs) with human umbilical vein endothelial cells implanted via the portal vein, and human bone marrow mesenchymal stem cells (hBMSCs) and mouse hepatocyte cell line implanted via the bile duct. FBLs were evaluated in terms of endothelial barrier function, biosynthesis, and metabolism and orthotopically transplanted into rats to determine the survival benefit. The FBLs with well-organized vascular structures exhibited endothelial barrier function, with reduced blood cell leakage. The implanted hBMSCs and hepatocyte cell line were well aligned in the parenchyma of the FBLs. The high levels of urea, albumin, and glycogen in the FBLs indicated biosynthesis and metabolism. Orthotopic transplantation of FBLs achieved a survival time of 81.38 ± 4.263 min in rats (n = 8) subjected to complete hepatectomy, whereas control animals (n = 4) died within 30 min (p < 0.001). After transplantation, CD90-positive hBMSCs and the albumin-positive hepatocyte cell line were scattered throughout the parenchyma, and blood cells were limited within the vascular lumen of the FBLs. In contrast, the parenchyma and vessels were filled with blood cells in the control grafts. Thus, orthotopic transplantation of whole DLS-based FBLs can effectively prolong the survival of rats subjected to complete hepatectomy. In summary, this work was the first to perform the orthotopic transplantation of FBLs, with limited survival benefits, which still has important value for the advancement of bioengineered livers.

Fabrication of Size-Controllable and Arrangement-Orderly HepG2 Spheroids for Drug Screening via Decellularized Liver Matrix-Derived Micropattern Array Chips

Three-dimensional (3D) culture via micropattern arrays to generate cellular spheroids seems a promising in vitro biomimetic system for liver tissue engineering applications, such as drug screening. Recently, organ-derived decellularized extracellular matrix emerges as arguably the most biomimetic bioink. Herein, decellularized liver matrix (DLM)-derived micropattern array chips were developed to fabricate size-controllable and arrangement-orderly HepG2 spheroids for drug screening. The porcine DLM was obtained by the removal of cellular components and then ground into powder, followed by enzymolysis. DLM as a coating substrate was compared with collagen type I (Col I) and Matrigel in terms of biological performance for enhancing cell adhesion, proliferation, and functions. Subsequently, we used poly(dimethylsiloxane) (PDMS) to adsorb DLM as the bioink to fabricate micropattern array chips. The optimal shape and size of micropattern were determined by evaluating the morphology, viability, and functions of HepG2 3D cellular aggregates. In addition, drug-susceptibility testing (paclitaxel, doxorubicin HCl, and disulfiram) was performed on this novel platform. The DLM provided the tissue-specific microenvironment that provided suitable supports for HepG2 cells, compared to Col I and Matrigel. A circular micropattern with a diameter of 100 μm was the optimal processing parameter to rapidly fabricate large-scale, size-controllable, and arrangement-orderly HepG2 cellular aggregates with 3D spheroid’s shape and high cell viability. Drug screening testing showed that the effect of a drug could be directly demonstrated on-chip by confocal microscopy measuring the viability of spheroids. We provide a novel platform for the large-scale generation of HepG2 spheroids with uniform size and arrangement, thus bringing convenience, reducing error, and increasing reproducibility for a rapid drug discovery by fluorescence quantitative analysis. This methodology may be possible to apply in advancing personalized medicine and drug discovery.

Liver scaffolds obtained by decellularization: A transplant perspective in liver bioengineering

Liver transplantation is the only definitive treatment for many diseases that affect this organ, however, its quantity and viability are reduced. The study of liver scaffolds based on an extracellular matrix is a tissue bioengineering strategy with great application in regenerative medicine. Collectively, recent studies suggest that liver scaffold transplantation may assist in reestablishing hepatic function in preclinical diseased animals, which represents a great potential for application as a treatment for patients with liver disease in the future. This review focuses on useful strategies to promote liver scaffold transplantation and the main open questions about this context. We outline the current knowledge about ex vivo bioengineered liver transplantation, including the surgical techniques, recipient survival time, scaffold preparation before transplantation, and liver disease models. We also highlight the current limitations and future directions regarding in vivo bioengineering techniques.

Ectopic expansion and vascularization of engineered hepatic tissue based on heparinized acellular liver matrix and mesenchymal stromal cell spheroids

Engineered liver organogenesis is not yet a viable therapeutic option, but ectopic liver histogenesis may be possible. Accumulating evidence has suggested that cell-cell interactions and cell-matrix interactions play an important role in determining the properties of engineered hepatic tissue in vitro and in vivo. In the current study, we utilized heparinized decellularized liver scaffolds and bone marrow mesenchymal stromal cell spheroids to fabricate engineered hepatic tissue, which was subsequently implanted into the omentum of Sprague-Dawley rats with or without liver injury. The survival, liver-specific functions, differentiation level and regenerative potential of the implanted hepatocyte-like cells in this ectopic liver system were evaluated, together with the vascularization status and therapeutic potential of the engineered hepatic tissue. We demonstrated that these hepatic grafts could survive and possess hepatocyte specific function in this ectopic liver system but could also efficiently anastomose with host vascular networks. Furthermore, we found that hepatocyte-like cells within grafts expanded more than 9-fold over the course of 4 weeks in immunocompetent rats with injured livers. Immunostaining revealed that these hepatocyte-like cells could self-organize into cord-like structures in vivo. In addition, these hepatic grafts exhibited therapeutic potential in liver injury induced by CCl₄. To our knowledge, this is the first report demonstrating the generation of long-term vascularized hepatic parenchyma at ectopic sites based on decellularized liver scaffolds and stem cells. These results provide an economic and feasible method for engineering hepatic tissue from construction to transplantation. This methodology may be applicable in clinical medicine, especially metabolic liver diseases. STATEMENT OF SIGNIFICANCE: In this manuscript, we presented an optimized method for the hepatic engineered tissue (HET) from construction to transplantation. The core of this method is utilizing the combination of heparinized decellularized liver scaffolds and stem cell spheroids, which could provide necessary cell-cell and cell-extracellular matrix interactions for HET in vitro and in vivo. We proved that these hepatic grafts could possess hepatocyte specific function and exhibit strong proliferative activity in ectopic liver system, but also able to anastomose with the host vascular networks efficiently and be compatible with the host immune system. This methodology may be possible one day to apply in clinical medicine, especially metabolic liver diseases.

Cell Therapy and Bioengineering in Experimental Liver Regenerative Medicine: In Vivo Injury Models and Grafting Strategies

Purpose of Review

To describe experimental liver injury models used in regenerative medicine, cell therapy strategies to repopulate damaged livers and the efficacy of liver bioengineering.

Recent Findings

Several animal models have been developed to study different liver conditions. Multiple strategies and modified protocols of cell delivery have been also reported. Furthermore, using bioengineered liver scaffolds has shown promising results that could help in generating a highly functional cell delivery system and/or a whole transplantable liver.

Summary

To optimize the most effective strategies for liver cell therapy, further studies are required to compare among the performed strategies in the literature and/or innovate a novel modifying technique to overcome the potential limitations. Coating of cells with polymers, decellularized scaffolds, or microbeads could be the most appropriate solution to improve cellular efficacy. Besides, overcoming the problems of liver bioengineering may offer a radical treatment for end-stage liver diseases.

Functionalized Vascular Structure in Bioengineered Liver Identified with Proteomics

Vascularization has been a major challenge in the development of a bioengineered liver. We aimed to develop a functionalized vascular structure in bioengineered liver and to identify the biological vascularization processes at different time points using proteomics. Decellularized rat liver scaffolds were vascularized with human umbilical vein endothelial cells (HUVECs) for 1, 3, 7, 14, and 21 days. HUVECs adhered to the internal surface and formed a functional barrier structure within 7 days. Vascularized liver scaffolds with biological activity were sustained for more than 21 days in vitro. Proteomics analysis indicated distinct characteristics after 14 days of culture compared with other time points. The biological processes of proteins expressed at days 1, 3, and 7 mainly involved cell adhesion, protein synthesis, and energy metabolism; however, different biological processes associated with muscle contraction and muscle filament sliding were identified at days 14 and 21. Coexpressed proteins at days 14 and 21 participated in 7 biological processes that could be classified as angiogenesis, myogenesis, or vascular function. Furthermore, the validation of related proteins revealed that basement membrane assembly, phenotype plasticity of HUVECs, and the regulation of adherence junctions contribute to the formation of a functionalized vascular structure. The biological vascularization processes at different time points identified with proteomics revealed development characteristics of vascular structure in a bioengineered liver, and at least 14 days of in vitro culture should be recommended for developing a functionalized vascular structure. This study may help to provide a better understanding of the mechanism of vascularization and facilitate the construction of a functional bioengineered liver for future clinical applications.