Speed of human tooth movement in growers and non-growers: Selection of applied stress matters

Evaluation of pulpal blood flow during orthodontic space closure: Prospective clinical trial

INTRODUCTION

Orthodontic tooth movement (OTM) is a biological process that can affect the vascularization of the dental pulp. The forces exerted on the teeth may increase periapical pressure that could compress the arterioles, which in turn affects pulpal blood flow (PBF). The study aimed to investigate how OTM affects PBF during orthodontic space closure.

METHODS

A total of 22 adolescent participants who required orthodontic space closure in mandibular posterior sectors were enrolled in a prospective clinical study. The same sliding mechanics, wires, and active elements were used. Patients were observed before OTM, after leveling before space closure, and at the 4th, 7th, 21st, and 28th during active space closure. PBF was measured with laser Doppler (LD) flowmetry. Dental models were obtained with an intraoral scanner.

RESULTS

The LD flow values decreased significantly during the observation period (2-way repeated measures analysis of variance, P <0.001). There was a significant difference in LD flow between tooth categories (2-way repeated measures analysis of variance, P <0.001). During space closure, the most pronounced LD flow reduction was observed in single-rooted teeth closest to the residual space. A higher speed of OTM was associated with a greater decrease in LD flow on day 4 of OTM (Pearson correlation, P = 0.0299).

CONCLUSIONS

Orthodontic space closure reduced PBF; it was lowest in the early stages of space closure and showed a tendency to increase during the first month. Anterior teeth closer to the interdental space that experiences more OTM and teeth that move faster during initial OTM had a higher risk of reduced blood flow.

Age-related alveolar bone maladaptation in adult orthodontics: finding new ways out

Compared with teenage patients, adult patients generally show a slower rate of tooth movement and more pronounced alveolar bone loss during orthodontic treatment, indicating the maladaptation of alveolar bone homeostasis under orthodontic force. However, this phenomenon is not well-elucidated to date, leading to increased treatment difficulties and unsatisfactory treatment outcomes in adult orthodontics. Aiming to provide a comprehensive knowledge and further inspire insightful understanding towards this issue, this review summarizes the current evidence and underlying mechanisms. The age-related abatements in mechanosensing and mechanotransduction in adult cells and periodontal tissue may contribute to retarded and unbalanced bone metabolism, thus hindering alveolar bone reconstruction during orthodontic treatment. To this end, periodontal surgery, physical and chemical cues are being developed to reactivate or rejuvenate the aging periodontium and restore the dynamic equilibrium of orthodontic-mediated alveolar bone metabolism. We anticipate that this review will present a general overview of the role that aging plays in orthodontic alveolar bone metabolism and shed new light on the prospective ways out of the impasse.

Characterizing orthodontic tooth movement in real time using dental monitoring scans: A pilot study

OBJECTIVES

This pilot study aimed to quantify the magnitude and type of tooth movement occurring in short time intervals within the regular monthly orthodontic visits for patients with fixed appliances and undergoing maxillary canine retraction. Additionally, this pilot study aimed to provide a descriptive evaluation for the accuracy and reliability of the Dental Monitoring (DM)-captured scans to those of an iTero digital scans in an extraction space closure model.

SETTINGS AND SAMPLE POPULATION

3D intraoral photographic scans (DM) for 12 patients with maxillary first premolar extractions in a single-centre academic institution.

MATERIALS AND METHODS

Twelve patients treated with fixed appliances and undergoing space closure for maxillary premolar extraction(s) were included. Nickel-titanium (200 g) closing coil springs were used for canine retraction. At initiation of space closure (T1), iTero scans were acquired, and patients were instructed to take DM scans every 4-5 days until their next visit in 4-5 weeks (T2). At T2, a final iTero scan in addition to a DM scan was taken. The number of patients who did the scans regularly as instructed declined as time elapsed. Stereolithography (STL) files generated from the DM scans were superimposed with the STL files from the iTero scans using GOM Inspect software to determine the accuracy of the DM 3D models. To assess rate, type and direction of tooth movement, each of the 3D image STL files generated from the DM scans, taken every 4-5 days by each patient, was superimposed on the previously captured scan. The rate of tooth movement for the maxillary molars and canines was calculated in the 3 planes of space (X, Y, Z) at each time point, until the end of the experiment.

RESULTS

Preliminary results indicated that the maxillary canines appeared to be displaced the greatest amount in the first 4-5 days with initial distolateral movement. As time elapsed, the rate of tooth movement decreased, and the tooth started moving distolingually.

CONCLUSIONS

Dental monitoring software provides a high-tech platform to monitor tooth movement in a 'real-time' approach. Accuracy of the photographic scans in relationship to the intraoral scans appears promising. There seems to be some evidence that the greatest amount of movement occurs initially in the first few days after activation, dropping thereafter to become a slower constant rate of tooth movement.

Effectiveness of photobiomodulation with low-level lasers on the acceleration of orthodontic tooth movement: a systematic review and meta-analysis of split-mouth randomised clinical trials

Although several studies have evaluated the effect of low-level laser therapy (LLLT) on orthodontic movement acceleration, results are still inconsistent. Such inconsistencies may be attributed to the differences in the LLLT application protocols, especially in terms of wavelength ranges. Objective: (i) to assess the clinical effects of LLLT on the acceleration of orthodontic movement and (ii) to establish the most effective LLLT wavelength to accelerate tooth movement during orthodontic treatments. MEDLINE (PubMed), Scopus, ScienceDirect, and LILACS were searched from inception to October 2022. Inclusion criteria: Split-mouth randomised clinical trials (RCTs) on systemically healthy patients reporting the effect of LLLT in accelerating orthodontic movements, specifically retraction of canines. The risk of bias was assessed using RoB-2. A random effect model was applied. Nineteen RCTs met the inclusion criteria for qualitative synthesis, and eighteen RCTs were included in the quantitative synthesis. Seventeen studies were rated as at some concerns of bias and two studies were classified as having a low risk of bias. In general terms, this systematic review and meta-analysis presents a moderate risk of bias. Findings of this systematic review and meta-analysis point to a tendency for faster orthodontic dental movement in the groups receiving LLLT treatment during the first (OR of 0.28 95% CI (0.07 to 0.48)), second (OR of 0.52 95% CI (0.31 to 0.73)), and third (OR of 0.41 95% CI (0.03 to 0.79)) month follow-up. Wavelengths ≤ 810 nm and energy density values ≤ 5.3 J/cm2 were associated with faster orthodontic tooth movement.

Effectiveness of photobiomodulation with low-level lasers on the acceleration of orthodontic tooth movement: a systematic review and meta-analysis of split-mouth randomised clinical trials

Although several studies have evaluated the effect of low-level laser therapy (LLLT) on orthodontic movement acceleration, results are still inconsistent. Such inconsistencies may be attributed to the differences in the LLLT application protocols, especially in terms of wavelength ranges. Objective: (i) to assess the clinical effects of LLLT on the acceleration of orthodontic movement and (ii) to establish the most effective LLLT wavelength to accelerate tooth movement during orthodontic treatments. MEDLINE (PubMed), Scopus, ScienceDirect, and LILACS were searched from inception to October 2022. Inclusion criteria: Split-mouth randomised clinical trials (RCTs) on systemically healthy patients reporting the effect of LLLT in accelerating orthodontic movements, specifically retraction of canines. The risk of bias was assessed using RoB-2. A random effect model was applied. Nineteen RCTs met the inclusion criteria for qualitative synthesis, and eighteen RCTs were included in the quantitative synthesis. Seventeen studies were rated as at some concerns of bias and two studies were classified as having a low risk of bias. In general terms, this systematic review and meta-analysis presents a moderate risk of bias. Findings of this systematic review and meta-analysis point to a tendency for faster orthodontic dental movement in the groups receiving LLLT treatment during the first (OR of 0.28 95% CI (0.07 to 0.48)), second (OR of 0.52 95% CI (0.31 to 0.73)), and third (OR of 0.41 95% CI (0.03 to 0.79)) month follow-up. Wavelengths ≤ 810 nm and energy density values ≤ 5.3 J/cm2 were associated with faster orthodontic tooth movement.

Effectiveness of photobiomodulation with low-level lasers on the acceleration of orthodontic tooth movement: a systematic review and meta-analysis of split-mouth randomised clinical trials

Although several studies have evaluated the effect of low-level laser therapy (LLLT) on orthodontic movement acceleration, results are still inconsistent. Such inconsistencies may be attributed to the differences in the LLLT application protocols, especially in terms of wavelength ranges. Objective: (i) to assess the clinical effects of LLLT on the acceleration of orthodontic movement and (ii) to establish the most effective LLLT wavelength to accelerate tooth movement during orthodontic treatments. MEDLINE (PubMed), Scopus, ScienceDirect, and LILACS were searched from inception to October 2022. Inclusion criteria: Split-mouth randomised clinical trials (RCTs) on systemically healthy patients reporting the effect of LLLT in accelerating orthodontic movements, specifically retraction of canines. The risk of bias was assessed using RoB-2. A random effect model was applied. Nineteen RCTs met the inclusion criteria for qualitative synthesis, and eighteen RCTs were included in the quantitative synthesis. Seventeen studies were rated as at some concerns of bias and two studies were classified as having a low risk of bias. In general terms, this systematic review and meta-analysis presents a moderate risk of bias. Findings of this systematic review and meta-analysis point to a tendency for faster orthodontic dental movement in the groups receiving LLLT treatment during the first (OR of 0.28 95% CI (0.07 to 0.48)), second (OR of 0.52 95% CI (0.31 to 0.73)), and third (OR of 0.41 95% CI (0.03 to 0.79)) month follow-up. Wavelengths ≤ 810 nm and energy density values ≤ 5.3 J/cm2 were associated with faster orthodontic tooth movement.

Effectiveness of photobiomodulation with low-level lasers on the acceleration of orthodontic tooth movement: a systematic review and meta-analysis of split-mouth randomised clinical trials

Although several studies have evaluated the effect of low-level laser therapy (LLLT) on orthodontic movement acceleration, results are still inconsistent. Such inconsistencies may be attributed to the differences in the LLLT application protocols, especially in terms of wavelength ranges. Objective: (i) to assess the clinical effects of LLLT on the acceleration of orthodontic movement and (ii) to establish the most effective LLLT wavelength to accelerate tooth movement during orthodontic treatments. MEDLINE (PubMed), Scopus, ScienceDirect, and LILACS were searched from inception to October 2022. Inclusion criteria: Split-mouth randomised clinical trials (RCTs) on systemically healthy patients reporting the effect of LLLT in accelerating orthodontic movements, specifically retraction of canines. The risk of bias was assessed using RoB-2. A random effect model was applied. Nineteen RCTs met the inclusion criteria for qualitative synthesis, and eighteen RCTs were included in the quantitative synthesis. Seventeen studies were rated as at some concerns of bias and two studies were classified as having a low risk of bias. In general terms, this systematic review and meta-analysis presents a moderate risk of bias. Findings of this systematic review and meta-analysis point to a tendency for faster orthodontic dental movement in the groups receiving LLLT treatment during the first (OR of 0.28 95% CI (0.07 to 0.48)), second (OR of 0.52 95% CI (0.31 to 0.73)), and third (OR of 0.41 95% CI (0.03 to 0.79)) month follow-up. Wavelengths ≤ 810 nm and energy density values ≤ 5.3 J/cm2 were associated with faster orthodontic tooth movement.

Effectiveness of photobiomodulation with low-level lasers on the acceleration of orthodontic tooth movement: a systematic review and meta-analysis of split-mouth randomised clinical trials

Although several studies have evaluated the effect of low-level laser therapy (LLLT) on orthodontic movement acceleration, results are still inconsistent. Such inconsistencies may be attributed to the differences in the LLLT application protocols, especially in terms of wavelength ranges. Objective: (i) to assess the clinical effects of LLLT on the acceleration of orthodontic movement and (ii) to establish the most effective LLLT wavelength to accelerate tooth movement during orthodontic treatments. MEDLINE (PubMed), Scopus, ScienceDirect, and LILACS were searched from inception to October 2022. Inclusion criteria: Split-mouth randomised clinical trials (RCTs) on systemically healthy patients reporting the effect of LLLT in accelerating orthodontic movements, specifically retraction of canines. The risk of bias was assessed using RoB-2. A random effect model was applied. Nineteen RCTs met the inclusion criteria for qualitative synthesis, and eighteen RCTs were included in the quantitative synthesis. Seventeen studies were rated as at some concerns of bias and two studies were classified as having a low risk of bias. In general terms, this systematic review and meta-analysis presents a moderate risk of bias. Findings of this systematic review and meta-analysis point to a tendency for faster orthodontic dental movement in the groups receiving LLLT treatment during the first (OR of 0.28 95% CI (0.07 to 0.48)), second (OR of 0.52 95% CI (0.31 to 0.73)), and third (OR of 0.41 95% CI (0.03 to 0.79)) month follow-up. Wavelengths ≤ 810 nm and energy density values ≤ 5.3 J/cm2 were associated with faster orthodontic tooth movement.

Effectiveness of photobiomodulation with low-level lasers on the acceleration of orthodontic tooth movement: a systematic review and meta-analysis of split-mouth randomised clinical trials

Although several studies have evaluated the effect of low-level laser therapy (LLLT) on orthodontic movement acceleration, results are still inconsistent. Such inconsistencies may be attributed to the differences in the LLLT application protocols, especially in terms of wavelength ranges. Objective: (i) to assess the clinical effects of LLLT on the acceleration of orthodontic movement and (ii) to establish the most effective LLLT wavelength to accelerate tooth movement during orthodontic treatments. MEDLINE (PubMed), Scopus, ScienceDirect, and LILACS were searched from inception to October 2022. Inclusion criteria: Split-mouth randomised clinical trials (RCTs) on systemically healthy patients reporting the effect of LLLT in accelerating orthodontic movements, specifically retraction of canines. The risk of bias was assessed using RoB-2. A random effect model was applied. Nineteen RCTs met the inclusion criteria for qualitative synthesis, and eighteen RCTs were included in the quantitative synthesis. Seventeen studies were rated as at some concerns of bias and two studies were classified as having a low risk of bias. In general terms, this systematic review and meta-analysis presents a moderate risk of bias. Findings of this systematic review and meta-analysis point to a tendency for faster orthodontic dental movement in the groups receiving LLLT treatment during the first (OR of 0.28 95% CI (0.07 to 0.48)), second (OR of 0.52 95% CI (0.31 to 0.73)), and third (OR of 0.41 95% CI (0.03 to 0.79)) month follow-up. Wavelengths ≤ 810 nm and energy density values ≤ 5.3 J/cm2 were associated with faster orthodontic tooth movement.

Effectiveness of photobiomodulation with low-level lasers on the acceleration of orthodontic tooth movement: a systematic review and meta-analysis of split-mouth randomised clinical trials

Although several studies have evaluated the effect of low-level laser therapy (LLLT) on orthodontic movement acceleration, results are still inconsistent. Such inconsistencies may be attributed to the differences in the LLLT application protocols, especially in terms of wavelength ranges. Objective: (i) to assess the clinical effects of LLLT on the acceleration of orthodontic movement and (ii) to establish the most effective LLLT wavelength to accelerate tooth movement during orthodontic treatments. MEDLINE (PubMed), Scopus, ScienceDirect, and LILACS were searched from inception to October 2022. Inclusion criteria: Split-mouth randomised clinical trials (RCTs) on systemically healthy patients reporting the effect of LLLT in accelerating orthodontic movements, specifically retraction of canines. The risk of bias was assessed using RoB-2. A random effect model was applied. Nineteen RCTs met the inclusion criteria for qualitative synthesis, and eighteen RCTs were included in the quantitative synthesis. Seventeen studies were rated as at some concerns of bias and two studies were classified as having a low risk of bias. In general terms, this systematic review and meta-analysis presents a moderate risk of bias. Findings of this systematic review and meta-analysis point to a tendency for faster orthodontic dental movement in the groups receiving LLLT treatment during the first (OR of 0.28 95% CI (0.07 to 0.48)), second (OR of 0.52 95% CI (0.31 to 0.73)), and third (OR of 0.41 95% CI (0.03 to 0.79)) month follow-up. Wavelengths ≤ 810 nm and energy density values ≤ 5.3 J/cm2 were associated with faster orthodontic tooth movement.

Effectiveness of photobiomodulation with low-level lasers on the acceleration of orthodontic tooth movement: a systematic review and meta-analysis of split-mouth randomised clinical trials

Although several studies have evaluated the effect of low-level laser therapy (LLLT) on orthodontic movement acceleration, results are still inconsistent. Such inconsistencies may be attributed to the differences in the LLLT application protocols, especially in terms of wavelength ranges. Objective: (i) to assess the clinical effects of LLLT on the acceleration of orthodontic movement and (ii) to establish the most effective LLLT wavelength to accelerate tooth movement during orthodontic treatments. MEDLINE (PubMed), Scopus, ScienceDirect, and LILACS were searched from inception to October 2022. Inclusion criteria: Split-mouth randomised clinical trials (RCTs) on systemically healthy patients reporting the effect of LLLT in accelerating orthodontic movements, specifically retraction of canines. The risk of bias was assessed using RoB-2. A random effect model was applied. Nineteen RCTs met the inclusion criteria for qualitative synthesis, and eighteen RCTs were included in the quantitative synthesis. Seventeen studies were rated as at some concerns of bias and two studies were classified as having a low risk of bias. In general terms, this systematic review and meta-analysis presents a moderate risk of bias. Findings of this systematic review and meta-analysis point to a tendency for faster orthodontic dental movement in the groups receiving LLLT treatment during the first (OR of 0.28 95% CI (0.07 to 0.48)), second (OR of 0.52 95% CI (0.31 to 0.73)), and third (OR of 0.41 95% CI (0.03 to 0.79)) month follow-up. Wavelengths ≤ 810 nm and energy density values ≤ 5.3 J/cm2 were associated with faster orthodontic tooth movement.

3D Finite Element Study of the Physiological Anchorage Control Concept on Anchorage Molars in Lingual Orthodontics

Objective. To study the effect of the physiological anchorage control concept on anchorage molars in lingual and labial orthodontic techniques. Methods. Three-dimensional finite element models, including the right maxillary first molar, periodontal ligament, alveolar bone, and buccal tube, were established. The models were divided into the McLaughlin–Bennett–Trevisi (MBT™) straight-wire model with 0-degree maxillary first molar axial inclination and the physiologic anchorage Speewire system (PASS) model with −7-degree maxillary first molar axial inclination. Simulated sliding retraction forces (1 N, 1.5 N, and 2 N) were loaded on the buccal side and lingual side, and retraction forces (0.5 N, 0.75 N, and 1 N) were loaded on the buccal and lingual sides simultaneously. The displacements, principal stresses, and von Mises stresses of the periodontal ligament under different conditions were derived. Results. The anchorage molars showed different degrees of rotation, tipping, intrusion, and extrusion. As the force increased, these displacement trends also increased. The mesial displacement of the buccal + lingual force loading was less than that of the other two groups. Under the same force load method, the mesial displacement of the PASS group was less than that of the MBT group. Tilt movement increases the tensile stress of the distal cervical margin and root mesial apical third and the compressive stress of the mesial cervical margin and root distal apical third. The maximum stress of the periodontal ligament was less than that of the other two groups when the lingual force was loaded. Conclusion. The physiological anchorage control concept in lingual orthodontics provides better sagittal anchorage control than in labial orthodontics, but there is no significant difference numerically. Attention should be given to the control of torsion, torque, and arch width. Tilt movement increases the PDL stress of the cervical margin and root apical third. The sliding retraction force should be loaded lingually to maintain the force value of 1∼1.5 N.

WITHDRAWN: A method to isolate forces and moments applied to teeth: An in vitro experiment

The publisher regrets that this article has been temporarily removed. A replacement will appear as soon as possible in which the reason for the removal of the article will be specified, or the article will be reinstated. The full Elsevier Policy on Article Withdrawal can be found at https://www.elsevier.com/about/our-business/policies/article-withdrawal.

The Effects of Temperature and Time of Heat Treatment on Thermo-Mechanical Properties of Custom-Made NiTi Orthodontic Closed Coil Springs

Nickel-Titanium (NiTi) springs have been increasingly used in orthodontics; however, no optimum condition of heat treatment has been reported. Therefore, this research was conducted to determine the optimum heat-treatment temperature and duration for the fabrication of NiTi-closed coil springs by investigating their effects on thermo-mechanical properties. As-drawn straight NiTi wires of 0.2 mm diameter were used to fabricate closed coil springs of 0.9 mm lumen diameter. The springs were heat-treated at three different temperatures (400, 450, and 500 °C) with three different durations (20, 40, and 60 min). Electron Probe Micro-Analysis (EPMA) and Differential Scanning Calorimetry (DSC) were used to investigate element composition and thermo-mechanical properties, respectively. Custom-made NiTi closed coil springs composed of 49.41%-Ti and 50.57%-Ni by atomic weight, where their DSC curves of 500 °C presented the obvious endothermic and exothermic peaks, and the austenite finish temperature (A_f) were approximately 25 °C. With increasing temperature, deactivation curves presented decreased plateau slopes generating higher superelastic ratios (SE ratios). At 500 °C, closed coil springs showed superelastic tendency with lower stress hysteresis. The thermo-mechanical properties were significantly influenced by heat-treatment temperature rather than duration. The optimum parameter appeared to be 500 °C for 40 min to produce appropriate force delivery levels, relatively low plateau slope, and lower hysteresis for orthodontic use.

Forces Between 50 and 100 cN May be Best for Mesiodistal Orthodontic Tooth Movements by Fixed Appliances

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION

Optimal force magnitude for bodily orthodontic tooth movement with fixed appliances: A systematic review. Theodorou CI, Kuijpers-Jagtman AM, Bronkhorst EM, Wagener FADTG. Am J Orthod Dentofacial Orthop. 2019;156(5):582-592.

SOURCE OF FUNDING

No funding involved.

TYPE OF STUDY/DESIGN

Systematic review.

The biomechanics of posterior maxillary arch expansion using fixed labial and lingual appliances

OBJECTIVE

To compare the biomechanics of straight labial, straight lingual, and mushroom lingual archwire systems when used in posterior arch expansion.

MATERIALS AND METHODS

An electro-mechanical orthodontic simulator allowing for buccal-lingual and vertical displacements of individual teeth and three-dimensional force/moment measurements was instrumented with anatomically shaped teeth for the maxillary arch. In-Ovation L brackets were bonded to lingual surfaces, and Carriere SLX brackets were bonded to labial surfaces to ensure consistency of slot dimensions. Titanium molybdenum archwires were bent to an ideal arch form, and the teeth on the orthodontic simulator were set to a passive position. Posterior teeth from the canine to second molar were moved lingually to replicate a constricted arch. From the constricted position, the posterior teeth were simultaneously moved until the expansive force decreased below 0.2 N. Initial force/moment systems and the amount of predicted expansion were compared for posterior teeth at a significance level of α = 0.05.

RESULTS

Archwire type affected both the expected expansion and initial force/moment systems produced in the constricted position. In general, the lingual systems produced the most expansion. The archwire systems were not able to return the teeth to their ideal position, with the closest system reaching 41% of the intended expansion.

CONCLUSIONS

In general, lingual systems were able to produce greater expansion in the posterior regions when compared with labial systems. However, less than half of the intended arch expansion was achieved with all systems tested.

Optimal force magnitude for bodily orthodontic tooth movement with fixed appliances: A systematic review

INTRODUCTION

There is a high degree of uncertainty regarding the appropriate force level that should be applied during orthodontic tooth movement (OTM). As a result, orthodontic treatments may take longer than necessary, leading to unwanted side effects. This review aimed to identify an optimal force range with the rate of OTM as the primary outcome. External apical root resorption and pain were evaluated as secondary outcomes, and the influence of growth was examined.

METHODS

Five electronic databases were searched (MEDLINE [via PubMed], Embase [via OVID], Cochrane Library, CINAHL, and Web of Science) with no publication date or language restrictions. Inclusion eligibility screening, quality assessment, and data extraction were performed by 3 investigators. Each retrieved record was assessed by 2 observers independently. Only randomized controlled trials and randomized split-mouth studies were included.

RESULTS

A total of 12 articles satisfied the inclusion criteria-two randomized controlled trials and 10 randomized split-mouth studies. Only 1 study showed a low risk of bias, whereas the remaining 11 were unclear. The qualitative analysis showed that forces between 50 cN and 250 cN produced a similar OTM rate; forces >250 cN yielded a slightly higher rate but were accompanied by adverse effects. Because of considerable heterogeneity in methodology, clinical diversity with varying forces between 18 cN and 360 cN, and poor statistical reporting, a meta-analysis was deemed inappropriate.

CONCLUSIONS

Forces between 50 cN and 100 cN seem optimal for OTM, patient comfort and potentially exhibit fewer side effects. Nevertheless, careful data interpretation is necessary because of the lack of strong evidence. Protocol registration: PROSPERO CRD42016039985.