Comparison between Percutaneous Screw Fixation and Plate Fixation via Sinus Tarsi Approach for Calcaneal Fractures: An 8-10-Year Follow-up Study

Postoperative complications after displaced intra-articular calcaneal fracture operations

BACKGROUND

The objective was to compare postoperative complications in the management of displaced intra articular calcaneal fractures (DIACF) between two groups; the open reduction and internal fixation (ORIF) group versus the percutaneous fixation (PF) group.

METHODS

A total of 243 DIACFs were diagnosed and 127 of them received operations either with ORIF 75 (59.1 %) or PF 52 (40.9 %) between 2004 and 2018. Postoperative complications, radiological Sanders's classification and improvement of Böhler's angle were analyzed.

RESULTS

Early complication rate (<6 weeks), rate of deep wound infections and wound edge necrosis were significantly better in PF than in ORIF patient group. There were no significant differences in late complications (>6 weeks from operation) nor in improvement of Böhler's angle.

CONCLUSION

Complication rate is lower when using PF technique while fracture reduction remains the same compared to the ORIF.

LEVEL OF EVIDENCE

IV retrospective cohort study at a single institution.

A Comparative Analysis of Between Percutaneous Cannulated Screw Fixation and Traditional Plate Internal Fixation in Treatment of Sanders II and III Calcaneal Fractures

The objective of this study is to compare the clinical efficacy of percutaneous cannulated screw fixation and traditional plate internal fixation in the treatment of Sanders II and III calcaneal fractures. The records of 64 patients were retrospectively analyzed. Thirty-three cases were fixed by percutaneous cannulated screws. Thirty-one cases were fixed with traditional steel plates. The preoperative preparation time of the screw group and plate group was 3 ± 1.7 days and 4.6 ± 2.1 days. The surgery time was 118.9 ± 43.8 minutes and 146.9 ± 47.6 minutes. The length of hospitalization was 8.7 ± 3.9 days and 17.0 ± 7.9 days. Intraoperative blood loss was 38.2 ± 27.7 mL and 67.1 ± 58.8 mL. The postoperative drainage volume of the plate group was 85.1 ± 53.7 mL, and no wound drainage was needed in the screw group after surgery. Postoperative wound complications occurred in 2 cases of the screw group and 8 cases of the plate group. The recovery effects of Gissane angle and Bohler angle are similar in the 2 groups. The excellent and good rate of the American Orthopaedic Foot and Ankle Society ankle-hindfoot Scale in the screw group was 96.8% at 12 months after surgery, whereas the rate was 93.5% in the plate group. Compared with the traditional plate internal fixation, the percutaneous cannulated screw group achieved a similar excellent and good rate of clinical treatment. It has the advantages of less trauma, less bleeding, low incidence of complications, short preoperative preparation, and hospitalization time.

Treatment of displaced intra-articular calcaneal fractures using a sinus tarsi approach. Surgical technique

Calcaneal articular fractures are fractures classically associated with a high rate of complications and poor outcomes. Osteosynthesis of the calcaneus through a sinus tarsi approach has shown results equal to or superior to those of the extended approach, having become the new gold standard. The objective of this article is to detail step by step the surgical technique of osteosynthesis of intra-articular fractures of the calcaneus through a sinus tarsi approach, from the selection of the fracture, positioning of the patient, layout of the operating room and the fluoroscope, the entire surgical process until postoperative treatment. The surgical technique described below is described in 6 steps. Anatomical reduction of complex calcaneal fractures through an Sinus Tarsi Approach requires an understanding of the fracture and its associated deformities. Following the described sequence step by step will help to achieve a better reduction in order to achieve better functional results.

Minimally Invasive Treatment of Inversion Shortening Calcaneal Fractures in the "Out-In" Position

OBJECTIVE

Heel fractures need extensive surgical incisions and are challenging to successfully reposition using traditional prying. The goal of this study is to evaluate the clinical effectiveness of using a Kirschner pin-guided distractor to treat inversion shortening calcaneal fractures in the "out-in" position.

METHODS

A total of 40 data from 37 patients with inversion shortened calcaneal fractures from January 2018 to March 2020 were reviewed. Preoperative lateral and axial X-rays and 3D CT were taken to assess the fracture type, and minimally invasive internal fixation was performed in the "out-in" position with distractor repositioning, and intraoperative and postoperative images were taken to assess fracture repositioning and fixation. During the follow-up period, the postoperative functional recovery status was assessed using the VAS score, AOFAS score, and FAOS score. Paired-samples t-test was used for all data comparisons.

RESULTS

All cases received a mean follow-up of 28.49 ± 3.25 months, and the mean fracture healing time was 7.84 ± 0.71 weeks. The postoperative images showed well-fixed fracture repositioning, and calcaneal height, length, width, and inversion angles were significantly improved. At the final follow-up, the calcaneal height, length, and width recovered from 39.35 ± 4.44mm, 79.35 ± 2.7mm, and 45.75 ± 2.87mm preoperatively to 50.93 ± 3.18mm, 82.23 ± 1.90mm, and 39.67 ± 1.58mm postoperatively (p < 0.001; p < 0.001; p < 0.001). The calcaneus inversion angle restored from 7.73° ± 2.26° to 3.80° ± 1.80° (p < 0.001). Böhler's angle and Gissane's angle improved from 13.13° ± 3.02° and 105.15° ± 8.94° to 27.95° ± 3.41° and 122.85° ± 5.54° (p < 0.001; p < 0.001). No non-healing fractures, osteomyelitis, or traumatic arthritis were observed.

CONCLUSION

Minimally invasive internal fixation with distractor repositioning in the "out-in" position is effective in the treatment of inversion shortening calcaneal fractures while restoring the anatomy and protecting the soft tissue.

3D simulation of percutaneous sustentaculum tali screw insertion in calcaneal fractures

BACKGROUND

In calcaneal fractures, the percutaneous screw fixation (PSF) is currently considered to be the better choice, but it is difficult to accurately place the screw into the sustentaculum tali (ST) during the operation. In this study, the ideal entry point, angle, diameter and length of the screw were calculated by simulating the operation process.

METHODS

We retrospectively collected the calcaneus computed tomography (CT) scans of 180 adults, DICOM-formatted CT-scan images of each patient were imported into Mimics software to establish calcaneus model. Virtual screws were placed on the lateral of the posterior talar articular surface (PTAS), the lateral edge of the anterior process of calcaneus (APC), and the calcaneal tuberosity, respectively, the trajectory and size of the screws were calculated.

RESULTS

The mean maximum diameter of the PTAS screw was 42.20 ± 3.71 mm. The vertical distance between the midpoint of the APC optimal screw trajectory and the lowest point of the tarsal sinus was 10.67 ± 1.84 mm, and the distance between the midpoint of the APC optimal screw trajectory and the calcaneocuboid joint was 5 mm ~ 19.81 ± 2.08 mm. The mean maximum lengths of APC screws was 44.69 ± 4.81 mm, and the Angle between the screw and the coronal plane of the calcaneus from proximal to distal was 4.72°±2.15° to 20.52°±3.77°. The optimal point of the maximum diameter of the calcaneal tuberosity screw was located at the lateral border of the achilles tendon endpoint. The mean maximum diameters of calcaneal tuberosity screws was 4.46 ± 0.85 mm, the mean maximum lengths of screws was 65.31 ± 4.76 mm. We found gender-dependent differences for the mean maximum diameter and the maximum length of the three screws.

CONCLUSIONS

The study provides effective positioning for percutaneous screw fixation of calcaneal fractures. For safer and more efficient screw placement, we suggest individualised preoperative 3D reconstruction simulations. Further biomechanical studies are needed to verify the function of the screw.

Optimal posterior screw placement configuration in Sanders 2B calcaneal fractures: A biomechanical study

BACKGROUND

Calcaneal fractures can be high energy intra-articular injuries associated with joint depression. Challenges to fracture reduction include lateral wall blow out, medial wall overlap, comminution and central bone loss. Secondary deformity such as hindfoot varus alters foot biomechanics. Minimally invasive approaches with indirect reduction of the calcaneal tuberosity to maintain the reduction using posterior screws is routinely being used in the treatment of joint depression fractures. Biomechanically, optimum screw numbers and configuration is not known. Biomechanical studies have evaluated and proposed different screw configurations, however, it is not clear which configuration best controls varus deformity. This study aims to determine the optimum screw configuration to control varus deformity in Sanders 2B calcaneal fractures.

METHODS

Sawbone models were prepared to replicate Sanders type 2-B fracture, with central bone loss and comminution. 0.5 cm medial wedge of the calcaneal tuberosity was removed to create varus instability. After stabilising posterior facet with a single 4 mm partial threaded screw, and applied an 8 hole contoured plate to stabilise the angle of Gissane, inserted one or two 7 mm cannulated partially threaded Charlotte^TM (Wright Medical Technology, Memphis, USA) Headless Multi-use Compression (under image guidance) extra screws to control varus and subsidence deformity of the fracture. Coronal plane displacement of the dissociated calcaneal tuberosity fragment relative to the body when applying 5 N, 10 N and 20 N force was measured in millimetres (mm).

RESULTS

2 screws inserted (one medial screw into the sustentaculum talus from inferior to superior and, one lateral screw into the long axis anterior process) provides the least displacement (0.88 ± 0.390 at 5 N and 1.7 ± 1.251 at 20 N) and the most stable construct (p < 0.05) when compared to other configurations. A single medial screw into the sustentaculum tali (conf. 3) resulted in the least stable construct and most displacement (4.04 ± 0.971 at 5 N and 11.24 ± 7.590 at 20 N) (p < 0.05).

CONCLUSION

This study demonstrates the optimal screw configuration to resist varus in calcaneal fractures using minimally invasive techniques. Optimal stability is achieved using 2 screws; one located along the long axis of the calcaneus (varus control) and the other placed in the short axis directed towards the posterior facet of the calcaneus (control varus and subsidence). Further cadaver research would help evaluate optimal screw placement in simulated fractures to further assess reproducibility.

Optimal posterior screw placement configuration in Sanders 2B calcaneal fractures: A biomechanical study

BACKGROUND

Calcaneal fractures can be high energy intra-articular injuries associated with joint depression. Challenges to fracture reduction include lateral wall blow out, medial wall overlap, comminution and central bone loss. Secondary deformity such as hindfoot varus alters foot biomechanics. Minimally invasive approaches with indirect reduction of the calcaneal tuberosity to maintain the reduction using posterior screws is routinely being used in the treatment of joint depression fractures. Biomechanically, optimum screw numbers and configuration is not known. Biomechanical studies have evaluated and proposed different screw configurations, however, it is not clear which configuration best controls varus deformity. This study aims to determine the optimum screw configuration to control varus deformity in Sanders 2B calcaneal fractures.

METHODS

Sawbone models were prepared to replicate Sanders type 2-B fracture, with central bone loss and comminution. 0.5cm medial wedge of the calcaneal tuberosity was removed to create varus instability. After stabilising posterior facet with a single 4mm partial threaded screw, and applied an 8 hole contoured plate to stabilise the angle of Gissane, inserted one or two 7mm cannulated partially threaded Charlotte™ (Wright Medical Technology, Inc. 5677 Airline Road Arlington, TN) Headless Multi-use Compression (under image guidance) extra screws to control varus and subsidence deformity of the fracture. Coronal plane displacement of the dissociated calcaneal tuberosity fragment relative to the body when applying 5N, 10N and 20N force was measured in millimetres (mm).

RESULTS

2 screws inserted (one medial screw into the sustentaculum talus from inferior to superior and, one lateral screw into the long axis anterior process) provides the least displacement (0.88±0.390 at 5N and 1.7±1.251 at 20N) and the most stable construct (p<0.05) when compared to other configurations. A single medial screw into the sustentaculum tali (conf. 3) resulted in the least stable construct and most displacement (4.04±0.971 at 5N and 11.24±7.590 at 20N) (p<0.05).

CONCLUSION

This study demonstrates the optimal screw configuration to resist varus in calcaneal fractures using minimally invasive techniques. Optimal stability is achieved using 2 screws; one located along the long axis of the calcaneus (varus control) and the other placed in the short axis directed towards the posterior facet of the calcaneus (control varus and subsidence). Further cadaver research would help evaluate optimal screw placement in simulated fractures to further assess reproducibility.

Minimally Invasive Reduction of Intraarticular Calcaneal Fractures With Percutaneous Fixation Using Cannulated Screws Versus Kirschner Wires: A Retrospective Comparative Study

BACKGROUND

Several minimally invasive techniques were developed for management of intraarticular calcaneal fractures. This study aimed to compare the functional and radiological outcomes of 2 minimally invasive reduction and fixation techniques using cannulated screws or Kirschner wires (K-wires) for fixation.

METHODS

This study was a retrospective comparative review of patients with displaced intraarticular calcaneal fractures, who were treated with cannulated screws or K-wires techniques. Clinical and radiological data were collected and compared between both groups. Functional outcomes and patient satisfaction using the Maryland Foot Score (MFS) and the visual analogue scale (VAS) of pain, in addition to the complications, were compared between both groups.

RESULTS

In total, 70 patients were included in the study: 34 in the cannulated screws group, with a mean age of 35.2 ± 4 years, and 36 in the K-wires groups, with a mean age of 33.4 ± 3 years. The operative time was shorter in the K-wires group (40.5 ± 5.6 minutes) compared to the cannulated screw group (49.5 ± 4.5 minutes), P < .001. There were no statistically significant differences between both groups regarding the radiological parameters, including Bohler's angle, angle of Gissane, calcaneal width, height, or length. The mean MFS, mean VAS, and complications were not different between the 2 groups.

CONCLUSION

Treatment of displaced intraarticular calcaneal fractures with minimally invasive reduction and fixation using either cannulated screws or K-wires can achieve similar excellent functional and radiological outcomes, with high patient satisfaction. The use of K-wires has the advantage of reduced operative time than cannulated screws.

LEVELS OF EVIDENCE

Level III: Retrospective comparative study.

A windows technique for sustentaculum tali screw fixation using the sinus tarsi approach for calcaneal fractures: a cadaveric study

INTRODUCTION

The minimally invasive approach for displaced intra-articular calcaneal fractures is significantly reducing postoperative wound complications. One minimally invasive method, the sinus tarsi approach (STA) has been increasingly widely used. STA is, however, challenging due to its technical demands and the risk of injury to the sural nerve (SN). The purpose of this study was to identify the SN and its branches including their anatomical relationship to the STA as well as to describe an anatomical windows technique for STA including determination of the safe angle for screw insertion into the sustentaculum tali fragment.

METHODS

Thirty-two adult cadaveric legs were disarticulated at the knee and unpaired. STA was performed on each specimen. The anatomy and distribution of the sural nerve and its branches were identified in relation to the incision. Three surgical windows were identified and selected. Kirshner wires were inserted in pairs via each of the windows towards the center of the sustentaculum tali. The safe angle for wire insertion in relation to the SN or its branches was then measured as well as the appropriate intraoperative drilling angle.

RESULTS

The plantar branch presented in the distal window in none of the samples, while the dorsal branches presented in 37.5% and the main SN presented in only 6.25%. In the middle window, the dorsal branch presented most often (43.75%) followed by the plantar branch (25.00%) and the SN (21.88%). In the proximal window, the SN presented in 100% of the samples, while the dorsal branch presented in none and the plantar branch presented in about 15.63% of the specimens. All three windows had their own acceptable average angle for screw insertion towards the sustentaculum tali.

CONCLUSIONS

The distal window is the safest for surgical approach and for calcaneal surgery screw fixation in terms of avoiding sural nerve injury. In addition, that window provides a wide working angle for screw fixation.

Comparison of screw versus locking plate fixation via sinus tarsi approach for displaced intra-articular calcaneal fractures

BACKGROUND

The optimal treatment of displaced intra-articular calcaneal fractures (DIACF) is controversial. This study compared the fixation stability of screws and locking plates in DIACF treated via the sinus tarsi approach (STA).

METHODS

We retrospectively evaluated 118 DIACF cases treated via STA and extracted data that could affect treatment outcomes. Loss of Böhler's angle after surgery was measured to compare fixation stability.

RESULTS

The loss of Böhler's angles was significantly smaller in the locking plate group than in the screw group (2.6 ± 2.7º vs. 5.6 ± 5.3º, P < 0.01). There was no difference in the clinical outcomes between the groups. On multivariate logistic regression analysis, screw fixation was significantly associated with loss of Böhler's angle by> 10º (odds ratio, 8.63; 95% confidence interval, 1.16-64.4; P < 0.05).

CONCLUSIONS

Locking plate fixation is more reliable than screw fixation for preventing correction loss in DIACF treated via STA.

LEVEL OF EVIDENCE

III.

Treatment of displaced intra-articular calcaneal fractures: A single-center experience study with 20 years follow-up

INTRODUCTION

This study was conducted to identify the patient characteristics, classification, treatment, complications, and functional outcomes of operatively treated displaced intra-articular calcaneal fractures (DIACFs) in a level-I trauma center over a 20-year period.

METHODS

Patients with a DIACF classified as Sanders ≥2 and operatively treated with percutaneous reduction and screw fixation (PSF) or open reduction and internal fixation (ORIF) between 1998 and 2017 were identified. Pre- and postoperative radiological assessments were performed. Functional outcomes were evaluated using the American Orthopaedic Foot & Ankle Society (AOFAS) score and the Maryland Foot Score (MFS). General health and patient satisfaction were assessed using the Short Form-36 Health Survey (SF-36) and the visual analog scale (VAS).

RESULTS

In total, 120 patients with a DIACF that were operatively treated with PSF or ORIF. Of these patients, 72 with a total of 80 DIACFs completed the questionnaires (60%). The average follow-up was 130 months. Mean scores for PSF and ORIF were 74 and 75 for AOFAS, 78 and 78 for MFS, 68 and 61 for SF-36, and 7.7 and 7.5 for VAS, respectively. An infection was the most common complication associated with ORIF (31%), and hardware removal (58%) was the most common complication in patients treated with PSF. Overall, 36 patients (68%) were able to return to work after a median time 6 months (IQR, 3-7) and 6 months (IQR, 3,25-6,75) for PSF and ORIF treated, respectively CONCLUSION: This long-term follow-up study reviews ORIF using ELA and PSF in the treatment of DIACFs. This study shows that both treatments are capable of restoring the Böhler angle and yield relatively good long-term functional outcomes. Differences in complication rates were apparent, infectious problems are inherent to ORIF using ELA, and hardware removal is associated with PSF.

Percutaneous Cannulated Screw Fixation vs. Plating With Minimally Invasive Longitudinal Approach After Closed Reduction for Intra-Articular Tongue-Type Calcaneal Fractures: A Retrospective Cohort Study

Objective

Displaced intra-articular tongue-type fractures are often treated with surgical interventions, and there is a lack of consensus regarding the surgical approach. This retrospective cohort study aimed to compare percutaneous cannulated screw (PCS) fixation and plating with a minimally invasive longitudinal approach (MILA) after closed reduction for the treatment of tongue-type calcaneal fractures.

Materials and Methods

A total of 77 patients with intra-articular tongue-type calcaneal fractures between September 2015 and July 2019 were included in this study. They were randomly allocated into two groups: PCS fixation (n = 32) and MILA (n = 45). The outcome measures included demographic variables, operation time (OT), preoperative time (POT), hospital stay time (HST), blood loss, visual analog scale (VAS) scores, American Orthopaedic Foot and Ankle Society (AOFAS) hindfoot scores, postoperative complications, and imaging parameters. The patients were clinically examined at 1, 3, 6, and 12 months, with a final follow-up period of 27 months.

Results

No significant differences were observed during the follow-up in calcaneal length, height, Gissane's and Böhler's angles, VAS scores, AOFAS hindfoot scores, or complication rates between the two groups. However, the postoperative VAS scores in the PCS group were significantly lower than those in the MILA group (p < 0.05). Furthermore, the OT, POT, and HST in the PCS group were significantly shorter than those in the MILA group (p < 0.05). Blood loss was lower in the PCS group than those in the other group (p = 0.044). However, postoperative calcaneal widening was significantly smaller in the MILA group than that in the PCS group (p < 0.001).

Conclusions

After closed reduction for the treatment of tongue-type calcaneal fractures, PCS fixation was superior to MILA in terms of OT, POT, HST, blood loss, pain, and degree of comfort. Meanwhile, MILA has the advantage of restoring the calcaneal width. Under the same rehabilitation program, the two approaches showed similar abilities in maintaining the closed reduction.

Minimally invasive treatment and internal fixation vs. extended lateral approach in calcaneus fractures of thalamic interest

The extended lateral side approach is a common technique in the surgical treatment of calcaneal fractures, with thalamic collapse offering a good exposure of the fractured site; however, it can be burdened with complications due to soft tissue trauma. The present study aimed to compare patients treated with minimally invasive osteosynthesis through a minimum lateral approach and internal fixation with patients that were treated using internal fixation with an extended lateral side approach in cases of intra-articular calcaneal fractures with thalamic fracture. Patients were evaluated preoperatively and postoperatively by performing clinical and imagistic examinations, with radiography scans of the anterior-posterior calcaneal profile and computer tomography. Furthermore, preoperative and postoperative analyses of the Böhler angle on the radiological profile, complications and duration of the hospital admission for both groups were performed. There were 36 patients (39 calcaneal fractures) in group 1 and 24 patients (29 calcaneal fractures) in group 2. The results demonstrated no statistically significant differences in the preoperative (P=0.72) and postoperative (P=0.20) Böhler angle values. The postoperative Böhler angle average values were 26.9 in group 1 and 29.3 in group 2. A total of 11 patients were treated with Kirschner wires inserted in the calcaneus, and in 2/ll cases, one of the brooches registered a migration movement. There were no cases of material migration in the fractures that were stabilized by inserting Kirschner brooches up to the astragalus and cuboid bones. Taken together, the results of the present study demonstrated no significant differences in the Böhler angle values between the minimally invasive and open reduction techniques. However, the antibiotic therapy period, as well as the infection rate were lower in patients that were treated using the minimally invasive technique, suggesting that this technique was superior with respect to lower complication rates and improved functional results.

Calcaneal Fractures-Which Approach for Which Fracture?

Treatment of calcaneal fractures has to be tailored to the individual pathoanatomy. If operative treatment is chosen, anatomic reconstruction of the calcaneal shape and joint surfaces is mandatory. For most of the displaced, intraarticular fractures, this can be achieved by less invasive reduction and fixation via a sinus tarsi approach, which may be extended along the "lateral utility" line for calcaneocuboid joint involvement or calcaneal fracture-dislocations. Purely percutaneous fixation is the treatment of choice for displaced extraarticular fractures and simple intraarticular fractures with adequate control of joint reduction. Specific approaches are used for rare calcaneal fracture variants.

Cannulated screw fixation versus plate fixation in treating displaced intra-articular calcaneus fractures: a systematic review and meta-analysis

BACKGROUND

Operative treatment has become the current trend for displaced intra-articular calcaneus fracture (DIACF), while using cannulated screw fixation or plate fixation is still controversial for treating DIACF. The purpose of this meta-analysis is to compare the outcome of the two fixation methods.

METHODS

We searched literature comparing cannulated screw fixation and plate fixation from PubMed, Embase, Web of Science, and Cochrane Library. Only randomized controlled trials were included. The outcomes of post-operative function, radiological measurement, time efficiency, and wound complications were pooled in the meta-analysis.

RESULT

Seven RCTs with 902 cases of DIACF were included. Pooled results showed the two fixation methods that had similar function satisfactory of AOFAS score (RR = 0.95, 95% CI = [0.83, 1.09], P = 0.47, I² = 0%) and Maryland Foot score (RR = 0.93, 95% CI = [0.68, 1.28], P = 0.66, I² = 84%). Compared to plate fixation, cannulated screw fixation had better improvement of Bohler's angle (WMD = 0.56, 95% CI = [0.20, 0.91], P = 0.002, I² = 34%) and Gissane's angle (WMD = 1.36, 95% CI = [0.56, 2.16], P = 0.0008, I² = 7%), better recovery of calcaneal height (WMD = 0.49, 95% CI = [0.02, 0.95], P = 0.04, I² = 6%), shorter time to operation (WMD =  - 2.91, 95% CI = [- 4.99, - 0.84], P = 0.006, I² = 97%), less operation time (WMD =  - 21.58, 95% CI = [- 37.31, - 5.85], P = 0.007, I² = 98%), reduced length of hospital stay (WMD =  - 2.00, 95% CI = [- 3.69, - 0.31], P = 0.02, I² = 97%), and less wound complications (RR = 0.16, 95% CI = [0.08, 0.32], P < 0.00001, I² = 0%).

CONCLUSION

Cannulated screw fixation and plate fixation have similar postoperative functional satisfactory. Cannulated screw fixation is superior to plate fixation in reduction quality, time efficiency, and wound complications.

Open reduction internal fixation versus minimally invasive percutaneous fixation for calcaneus fractures: Mid-term outcomes and social consequences

OBJECTIVES

This study aims to evaluate the mid-term clinical, functional, radiological, and socioeconomic outcomes of calcaneus fractures treated with open reduction-internal fixation (ORIF) versus minimally invasive percutaneous fixation (MIPF).

PATIENTS AND METHODS

A total of 48 patients (34 males, 14 females; mean age: 44.05 years; range, 19 to 64 years) who underwent either ORIF or MIPF for calcaneus fractures between January 2010 and January 2016 were retrospectively analyzed. The patients were divided into two groups as the ORIF group (n=36) and MIPF group (n=12). The American Orthopaedic Foot & Ankle Society (AOFAS) score, Maryland Foot Score (MFS), and the Short Form-36 (SF-36) scores were assessed for the clinical assessment. The mean duration of operation, mean length of hospitalization, pedobarographic gait analysis, the incidence of contralateral knee pain, increased shoe size, and change of profession due to significant heel pain were also evaluated. The Böhler's angle, Gissane angle, and calcaneal varus were measured for radiological assessment.

RESULTS

There was a significant difference in the mean operation time (p=0.001) and length of hospitalization (p=0.001) between the two groups. There was no significant difference between the pre- and postoperative third-year Böhler's and Gissane angles (p=0.05, p=0.07, p=0.09, respectively). There were no significant differences between the postoperative first-, second-, and third-year AOFAS, MFS, and SF-36 scores (p=0.57, p=0.55 p=0.85, p=0.64, p=0.21, p=0.51, p=0.20, p=0.15, p=0.22, respectively). Thirteen patients in the ORIF group and five patients in the MIPF group changed their job due to significant heel pain. The increased shoe size was correlated with the residual calcaneal varus (p=0.001).

CONCLUSION

Both methods have pros and cons in the treatment of calcaneal fractures. Although MIPF is more advantageous in terms of operation duration and length of hospitalization, more favorable radiological results can be obtained with ORIF. Calcaneal varus should be corrected to prevent the increased shoe size and contralateral knee pain.

Calcaneal fractures: 3D-printing model to assist spatial weaving of percutaneous screws versus conventional open fixation-a retrospective cohort study

PURPOSE

This study compared the clinical effectiveness and wound complications of a three-dimensional model-assisted spatial weaving screw fixation (3D-SWSF) versus open reduction and internal fixation (ORIF) via an L-shaped extensile lateral approach for calcaneal fractures.

METHODS

This single-centre retrospective cohort study was conducted with two cohort groups in which patients with Sanders II and III calcaneal fractures underwent 3D-SWSF or conventional ORIF. The clinical outcome measures included operation duration, time to operation, wound complications, blood loss volume, hospital stays, American Orthopedic Foot and Ankle Society (AOFAS) Ankle-Hindfoot score, and visual analog scale (VAS) score. The pre-operative, post-operative, and one-year follow-up Gissane's angle (GA), Böhler's angle (BA), height, and width and length of the calcaneal fractures were also compared between the two groups.

RESULTS

From Oct 2015 to Oct 2019, 31 patients received 3D-SWSF and 41 received conventional ORIF. A total of 11 (26.8%) patients in ORIF group had wound complications, compared with only two (6.5%) in 3D-SWSF group (p = 0.032). Operative time, blood loss, and hospital stay in 3D-SWSF group were lesser than those in ORIF group. The patients treated with 3D-SWSF had better AOFAS and VAS scores than those treated with ORIF at the last follow-up. The post-operative and one-year follow-up radiographic indexes as well as the GA, BA, length, width, and height of the calcaneal fractures were relatively comparable between the two groups.

CONCLUSION

Our study revealed that 3D-SWSF could effectively decrease the risk of wound complications, shorten operation time, reduce length of hospitalization, and improve post-operative rehabilitation.

Sinus Tarsi Approach for Calcaneal Fractures: The New Gold Standard?

Displaced intra-articular calcaneal fractures are among the most difficult articular fractures to treat, with a high rate of potential complications. Is important to restore calcaneus posterior facet anatomy as well as calcaneus width, length, and height. The extensile lateral approach provides excellent fracture visualization and allows reduction of the displaced fracture fragments, but high complication rate has been described with this approach, so many studies favor the sinus tarsi approach. Recent evidence favoring sinus tarsi rather than the extensile lateral approach has shifted opinion toward this less invasive approach, which can be considered the new gold standard.

Biomechanical analysis of minimally invasive crossing screw fixation for calcaneal fractures: Implications to early weight-bearing rehabilitation

BACKGROUND

Minimally invasive fixation using crossing screws was believed to produce satisfactory clinical outcome whereas its stability in early weight-bearing remained controversial. This study aimed to analyze the biomechanical stability of minimally invasive fixation during balanced standing and walking stance, and provide evidence for early rehabilitation.

METHODS

A finite element model of foot-ankle-shank complex was reconstructed based on computed tomography and magnetic resonance images, and validated by plantar pressure of the model participant. A Sanders III calcaneal fracture was created on the model, and then fixed using crossing screws. The predicted stress distribution, fracture displacement, Bohler's angle and Gissane's angle were compared between the intact calcaneus and fracture model with the fixation.

FINDINGS

Postoperatively, the concentrated stress appeared at the junction of the calcaneus and its surrounding tissues (especially Achilles tendon, plantar fascia and ligaments) during standing and walking stances, and the stress exceeded the yield strength of trabecular bone. The longitudinal screws sustained the highest stresses and concentrated at the tips and the calcaneal tuberosity junction. The displacement of posterior joint facet, Bohler's angle, and Gissane's angle were within the acceptable range either standing or walking after the fixation.

INTERPRETATION

Early weight-bearing standing and walking after minimally invasive fixation may cause high stress concentration thereby induce calcaneus stress fractures and other complications like plantar fasciitis and heel pain, so it should not be supported. The peri-calcaneus tendons, i.e., Achilles tendon and plantar fascia, play key roles in the stabilization of the calcaneal fracture after operation.