Eradication of Gram-positive and Gram-negative bacteria by photosensitizers immobilized in polystyrene

Antibacterial Activity of Rose Bengal Entrapped in Organically Modified Silica Matrices

Photosensitizers (PSs) are known as powerful antibacterial agents that are activated by direct exposure to visible light. PSs can be noncovalently entrapped into the silica gel network for their controlled release into a contaminated area. The immobilization of PS-containing gel matrices on a polymer support expands their possible applications, such as antibacterial surfaces and coatings, which can be used for the disinfection of liquids. In the current study, we report the use of Rose Bengal (RB) incorporated into organically modified silica matrices (RB@ORMOSIL matrices) by the sol-gel technique. The RB matrices exhibit high activity against Gram-positive and Gram-negative bacteria under illumination by white light. The amount and timing of solidifier addition to the matrix affected the interaction of the latter with the RB, which in turn could affect the antibacterial activity of RB. The most active specimen against both Gram-positive and Gram-negative bacterial cells was the RB6@ORMOSIL matrix immobilized on a linear low-density polyethylene surface, which was prepared by an easy, cost-effective, and simple thermal adhesion method. This specimen, RB6@OR@LLDPE, showed the low release of RB in an aqueous environment, and exhibited high long-term antibacterial activity in at least 14 rounds of recycled use against S. aureus and in 11 rounds against E. coli.

Contributions of photochemistry to bio-based antibacterial polymer materials

Surgical site infections constitute a major health concern that may be addressed by conferring antibacterial properties to surgical tools and medical devices via functional coatings. Bio-sourced polymers are particularly well-suited to prepare such coatings as they are usually safe and can exhibit intrinsic antibacterial properties or serve as hosts for bactericidal agents. The goal of this Review is to highlight the unique contribution of photochemistry as a green and mild methodology for the development of such bio-based antibacterial materials. Photo-generation and photo-activation of bactericidal materials are illustrated. Recent efforts and current challenges to optimize the sustainability of the process, improve the safety of the materials and extend these strategies to 3D biomaterials are also emphasized.

Antibacterial application of covalently immobilized photosensitizers on a surface

Singlet oxygen produced by irradiating photosensitizers (PSs) can be used to kill pathogens during water treatment. Chemical immobilization of the PSs on surfaces can maintain their disinfection function long-term. In this study, two model PSs (rose bengal (RB) and hematoporphyrin (HP)) were immobilized on a glass surface using a silane coupling agent with an epoxide group, and their antibacterial properties were analyzed. Fourier transform infrared spectroscopy demonstrated that a covalent bond formed between the epoxide group and hydroxyl group in the PSs. A large proportion of the immobilized PSs (approximately 50%) was active in singlet oxygen production, which was evidenced by a comparative analysis with free PSs. RB was more effective at producing singlet oxygen than HP. The immobilized PSs were durable in terms of repeated use. On the other hand, singlet oxygen produced by the PSs was effective at killing bacteria, mostly for Gram-positive bacteria (> 90% death for 2 h of irradiation), by damaging the cell membrane. The preferable antibacterial property against Gram-positive bacteria compared with that against Gram-negative bacteria suggested efficient penetrability of singlet oxygen across the cell membrane, which led to cell death. Taken together, it was concluded that immobilization of PSs on surfaces using the silane coupling agent proposed in this study was effective at killing Gram-positive bacteria by forming singlet oxygen.

Phthalocyanine functionalized poly(glycidyl methacrylate) nano-assemblies for photodynamic inactivation of bacteria

Self-assembled PGED-Pc nanoparticles are able to inactivate bacteria via the generation of reactive oxygen species in aqueous solution, while a facile immobilization strategy sheds light on the engineering of self-sterilizing surfaces to combat bacterial infections.

Study of Singlet Oxygen Dynamics on Silicon Polymer Matrix

We report a detailed analysis of singlet oxygen generated from the photofunctional polymer film (PFPF) matrix which is the silicone polymer film (PDMS) embedded with a photosensitizer. Activation and deactivation dynamics of singlet oxygen generated from PFPFs were investigated with time-resolved phosphorescence spectroscopy. The singlet oxygen generated from PFPFs was dissipated into three different regions of the polymer matrix; the inside (component A), the surface (component B), and the outside (component C). According to the deactivation dynamics of singlet oxygen in the polymer matrix, the components B and C are expected to be more important for various applications.

A photodynamic antibacterial spray-coating based on the host–guest immobilization of the photosensitizer methylene blue

An efficient photodynamic antibacterial spray-coating is developed with a very low MB density and high singlet oxygen quantum yield.

Water Disinfection by Immobilized Photosensitizers

Fresh water shortage has become a global problem. A partial solution for this problem is the use of treated and disinfected wastewater for irrigation. However, most existing wastewater disinfection methods are based on the use of aggressive chemicals or power-consuming physical processes. Photodynamic eradication of waterborne bacteria by immobilized photosensitizers may be a good alternative to conventional methods. In the present work, the photosensitizers Rose Bengal sodium salt, Rose Bengal lactone, methylene blue, and hematoporphyrin were immobilized in polyethylene or polypropylene using a “green” method of co-extrusion, without addition of any chemicals, yielding polymeric strips and beads containing the photosensitizers. The antibacterial efficiency of these immobilized photosensitizers was tested against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli in batch and continuous regimes upon illumination with a white luminescent lamp. All examined photosensitizers demonstrated a good ability to decrease the bacterial concentration, up to their total eradication. Immobilized photosensitizers are proposed for batch or continuous disinfection of wastewater after secondary treatment.

Effect of Photodynamic Antibacterial Chemotherapy Combined with Antibiotics on Gram-Positive and Gram-Negative Bacteria

The well-known and rapidly growing phenomenon of bacterial resistance to antibiotics is caused by uncontrolled, excessive and inappropriate use of antibiotics. One of alternatives to antibiotics is Photodynamic Antibacterial Chemotherapy (PACT). In the present study, the effect of PACT using a photosensitizer Rose Bengal alone and in combination with antibiotics including methicillin and derivatives of sulfanilamide synthesized by us was tested against antibiotic-sensitive and antibiotic-resistant clinical isolates of Gram-positive S. aureus and Gram-negative P. aeruginosa. Antibiotic-sensitive and resistant strains of P. aeruginosa were eradicated by Rose Bengal under illumination and by sulfanilamide but were not inhibited by new sulfanilamide derivatives. No increase in sensitivity of P. aeruginosa cells to sulfanilamide was observed upon a combination of Rose Bengal and sulfanilamide under illumination. All tested S. aureus strains (MSSA and MRSA) were effectively inhibited by PACT. When treated with sub-MIC concentrations of Rose Bengal under illumination, the minimum inhibitory concentrations (MIC) of methicillin decreased significantly for MSSA and MRSA strains. In some cases, antibiotic sensitivity of resistant strains can be restored by combining antibiotics with PACT.

Membrane Oxidation in Cell Delivery and Cell Killing Applications

Cell delivery or cell killing processes often involve the crossing or disruption of cellular membranes. We review how, by modifying the composition and properties of membranes, membrane oxidation can be exploited to enhance the delivery of macromolecular cargoes into live human cells. We also describe how membrane oxidation can be utilized to achieve efficient killing of bacteria by antimicrobial peptides. Finally, we present recent evidence highlighting how membrane oxidation is intimately engaged in natural biological processes such as antigen delivery in dendritic cells and in the killing of bacteria by antimicrobial peptides. Overall, the insights that have been recently gained in this area should facilitate the development of more effective delivery technologies and antimicrobial therapeutic approaches.

Eosin-mediated synthesis of polymer coatings combining photodynamic inactivation and antimicrobial properties

Eosin-derived coatings exhibiting photodynamic bacterial inactivation and antibacterial properties.

Superior performance of macroporous over gel type polystyrene as a support for the development of photo-bactericidal materials

Macroporous polystyrene resins are best suited than gel-type polymers to develop supported photosensitizers for the generation of bactericidal singlet oxygen.

Antibacterial Properties of Rose Bengal Immobilized in Polymer Supports

Photosensitizers immobilized in polymers can serve as antibacterial surfaces or coatings and can be applied for disinfection of water or medical instruments. The antibacterial activity of the immobilized photosensitizers is based on their excitation by visible light followed by energy transfer from the photosensitizers to oxygen dissolved in an aqueous phase which produces reactive oxygen species that cause irreversible damage to bacterial cells. The photosensitizer Rose Bengal immobilized in polystyrene, polycarbonate and poly (methyl methacrylate) was shown to eradicate Gram-positive Staphylococcus aureus bacteria under moderate illumination.

Polymer-immobilized photosensitizers for continuous eradication of bacteria

The photosensitizers Rose Bengal (RB) and methylene blue (MB), when immobilized in polystyrene, were found to exhibit high antibacterial activity in a continuous regime. The photosensitizers were immobilized by dissolution in chloroform, together with polystyrene, with further evaporation of the solvent, yielding thin polymeric films. Shallow reservoirs, bottom-covered with these films, were used for constructing continuous-flow photoreactors for the eradication of Gram-positive Staphylococcus aureus, Gram-negative Escherichia coli and wastewater bacteria under illumination with visible white light using a luminescent lamp at a 1.8 mW·cm⁻² fluence rate. The bacterial concentration decreased by two to five orders of magnitude in separate reactors with either immobilized RB or MB, as well as in three reactors connected in series, which contained one of the photosensitizers. Bacterial eradication reached more than five orders of magnitude in two reactors connected in series, where the first reactor contained immobilized RB and the second contained immobilized MB.

Photoactive, porous honeycomb films prepared from Rose Bengal-grafted polystyrene

Honeycomb-structured porous polymer films based on photosensitizer-grafted polystyrene are prepared through the breath figure process. Rose Bengal (RB) photosensitizer is first attached to a well-defined poly(styrene-stat-4-vinylbenzyl chloride) statistical copolymer, synthesized by nitroxide-mediated radical polymerization. The RB grafted poly(styrene-stat-4-vinylbenzyl chloride) (ca. 20,000 g mol(-1) molar mass, 1.2 dispersity) leads to porous polymer films, with a hexagonal pore pattern, while a simple mixture of poly(styrene-stat-4-vinylbenzyl chloride) and the insoluble RB photosensitizer produced unstructured, nonporous films. The RB-grafted honeycomb films, compared with the corresponding nonporous flat films, are more efficient for oxidation of organic molecules via singlet oxygen production at a liquid/solid interface. The oxidations of 1,5-dihydroxynaphthalene to juglone and α-terpinene to ascaridole are followed in ethanol in the presence of both types of films. Oxidation of the organic molecules is a factor 5 greater with honeycomb compared to the nonporous films. This gain is ascribed to two factors: the specific location of the polar photosensitizer at the film interface and the greater exchange surface, as revealed by fluorescence and scanning electron microscopies.