Complications in sinus lifting procedures: Classification and management

Epidemiology of Odontogenic Sinusitis

Odontogenic sinusitis (ODS) is more common than historically thought, representing 25% to 40% of all maxillary sinusitis. Due to a lack of widely accepted diagnostic criteria and a specific international diagnostic code, a true overall prevalence is unknown. ODS may be caused by either a multitude of infectious dental pathologies or complications after dental procedures. The most common dental etiologies causing ODS are apical periodontitis (endodontic) and oroantral communication or fistula after dental extraction. Less commonly, ODS can evolve after dental implant or maxillary sinus bone grafting surgeries, infection of odontogenic cysts, or advanced periodontitis.

PLLA/GO Scaffolds Filled with Canine Placenta Hydrogel and Mesenchymal Stem Cells for Bone Repair in Goat Mandibles

Bone defects in animals can arise from various causes, including diseases, neoplasms, and most commonly, trauma. Comminuted fractures that exceed the critical size may heal poorly due to deficient or interrupted vascularization, resulting in an insufficient number of progenitor cells necessary for bone regeneration. In this context, 3D printing techniques using poly-L-lactic acid/graphene oxide (PLLA/GO) aim to address this issue by creating customized scaffolds combined with canine placenta hydrogel and mesenchymal stem cells for use in goat mandibles, compared to a control group using titanium plate fixation. Ten canine placentas were decellularized and characterized using histological techniques. A hydrogel derived from the canine placenta extracellular matrix (cpECM) was produced to improve cell attachment to the scaffolds. In vitro cytotoxicity and cell adhesion to the cpECM hydrogel were assessed by scanning electron microscopy (SEM). The resulting biomaterials, cpECM hydrogel and PLLA/GO scaffolds, maintained their functional structure and supported cell adhesion, maintenance, and proliferation in vitro. Thermography showed that PLLA/GO scaffolds with cpECM hydrogel performed effectively, similar to the control group. Computed tomography scans revealed bone calluses, suggesting an ongoing repair process. These findings demonstrate the innovative technological potential of these materials for use in surgical interventions. Future studies on PLLA/GO scaffolds will provide further insights into their effects on goat models.

Analysis of bone quality formation in sinus lifts with immediate implants

Sinus lift surgeries are part of the daily practice of dentists. This study evaluates the long-term structure of the bone placed in sinus lifts through the fractal dimension. We conducted a retrospective study on a sample of 35 patients with 51 sinus lifts performed using a lateral window approach and filling material placement. We radiologically analyzed the graft bone to observe its evolution up to one and a half years after the surgical procedure. The obtained results were the average area of the sinuses analyzed was 1401.96 mm2, with a mean area occupied by the filling material of 297.75 mm2. Significant differences are observed when comparing the fractal dimension values obtained on the initial day and one year after prosthesis loading. Similarly, when comparing the values of the area occupied by the biomaterial at the start day and one year after prosthesis loading, significant differences are also obtained (p-value < 0.001). In conclusion, the filling material used in the lateral window sinus lift procedure undergoes significant resorption and shows changes in the fractal dimension.

Prevention and management of intra-operative complications in maxillary sinus augmentation: A review

Maxillary sinus floor elevation is usually performed in two different ways: the lateral approach involves the creation of a bony window on the maxillary sinus lateral wall, providing direct access to the sinus cavity for membrane elevation and subsequent graft placement, and the transcrestal approach is considered less invasive. The aim of this article is to describe, based on the literature, how to anticipate, avoid, and manage the intraoperative complications that can occur with both approaches. For both approaches, the most common complication is the sinus membrane perforation. For the lateral approach, an average frequency ranging from 15.7% to 23.1% is reported, but because of the better visibility, their management will be easier compared to the transcrestal approach. Mean perforation rate reported for the transcrestal approach is lower (3.1%-6.4%), but it should be noted that a significant number of perforations cannot be detected and managed given the blind nature of this technique. Anatomical parameters such as sinus width and buccal wall thickness may be a risk factor for one approach and not the other. As it is impossible to assess the resistance of the Schneiderian membrane, the transcrestal approach is more likely to lead to infectious complications in the event of perforation. Others, such as the risk of vascular damage, are encountered only with the lateral approach, which can be prevented easily by dissecting the alveolo-antral artery. For both approaches, prevention is essential and consists in analyzing the anatomy, mastering the surgical technique, and collaborating with the ENT to manage the essentially infectious consequences of intraoperative complications.

3D-Printable Biopolymers for Socket Preservation Technique: Soft Tissues Response: A Pilot Randomised Clinical Study

BACKGROUND

The aim of the present parallel clinical study is to evaluate the efficacy of 3D-printed biopolymers compounded with osteoconductive material (beta-tricalcium phosphate and hydroxyapatite) for soft tissue closure after tooth extraction.

MATERIALS AND METHODS

this study followed the CONSORT reporting guidelines; 39 patients were treated with socket preservation using 3D-printed biopolymers and randomly divided into 3 groups (Test 1, Test 2, and Control). All cases were treated without flap elevation, careful cleaning and debridement of the sites, and then randomly sealed as follows: In T1, with a 3D-printed disk of poli-D-lactic acid with 10% of hydroxyapatite; in T2, using a 3D-printed disk of poli-ε caprolactone with 20% of β-tricalcium phosphate; and in T3, the socket was left open to heal. At baseline (extraction time) and 6 weeks after extraction, the rate of exposure was evaluated and stratified according to the site (anterior, posterior).

RESULTS

No dropouts were observed during the 6 weeks follow-up. All sites underwent uneventful healing with no complications. For posterior teeth, Test 1 and Test 2 showed full healing of the soft tissues with a reduction of the exposed area from 46.5 ± 8.25 mm2 to 0.6 ± 0.84 mm2 and from 47.1 ± 8.67 mm2 to 0.6 ± 0.7 mm2, respectively. The Control group exhibited a reduction from 45.6 ± 7.25 mm2 to 1.2 ± 0.9 mm2. Both Tests 1 and 2, when compared to the Control group, showed statistically significant better healing (p < 0.05). Anterior teeth showed a complete closure of the socket 4 weeks after the extraction with no noticeable differences between Test and Control.

CONCLUSIONS

Both materials used in this study showed evidence to achieve the purpose. Ethical Guidelines: written informed consent was obtained from the participants of the study, as requested by the Ethics Committee for Health Research Faculty of Dentistry, Universitas Trisakti, with the following number: 641/S3/KEPK/FKG/5/2023.

Risk Factors for Implant Failure Following Transcrestal Sinus-Floor Elevation: A Case Report and Literature Review

Although transcrestal sinus floor elevation (TSFE) is widely used for cases of insufficient residual bone height in the posterior maxilla, few studies focus on the risk factors of early implant failure associated with TSFE procedures. This study aimed to identify and summarize the possible risk factors of implant failure associated with TSFE to ensure a more predictable implant survival rate using TSFE. We report the treatment of a patient with implant failure following TSFE and discuss this case's possible associated risk factors. A standard implant with a diameter of 4.8 mm and length of 10 mm was used after the TSFE procedure. Implant loosening was suddenly observed 6 weeks after the initial surgery. Factors that could result in early implant failure included patient-related risk factors, anatomical factors of the operational area, and operation- and implant-related factors. Within the current study's limitations, the graft material particles between the implant surface and socket could be considered a direct risk factor resulting in implant failure. Therefore, more attention should be paid to socket cleaning during the TSFE procedure, and loose particulate grafting materials should be discouraged. Another significant consideration for implant loss is the possibility of fractures in the buccal or palatal cortical plates during the site preparation and implant insertion. Thus, these factors should be studied further and receive more clinical attention.

Cyanoacrylate versus Collagen Membrane as a Sealing for Alveolar Ridge Preservation: A Randomized Clinical Trial

This study involved a randomized clinical trial that included 140 patients. Alveolar ridge preservation was performed with xenografts. Sealing in the control group consisted of a collagen membrane versus cyanoacrylate in the test group. The dental implants were placed immediately after extraction. The variables were evaluated at 3, 12, and 18 months of follow-up. Pearson's chi-squared test was used for qualitative variables and the Student t-test for related samples was used for quantitative variables. The change in buccolingual alveolar bone width was significantly greater in the CMX group than in the CX group after three months (p < 0.005). However, significance was not reached at the other follow-up timepoints (p > 0.005). CAL showed significantly greater values in the CMX group than in the CX group (p < 0.005), and MBL proved greater in the CMX group than in the CX group, with p < 0.001. Five membrane exposures were recorded in the CMX group. Cyanoacrylate as a sealing method for alveolar ridge preservation seems to afford better clinical and radiological results than collagen membrane.

Radiographic outcomes of lateral sinus floor elevation at sites without perforations and sites with perforations managed with a resorbable membrane: A retrospective study

AIM

To evaluate the radiographic outcomes of lateral sinus floor elevation with simultaneous implant placement at sites without sinus membrane perforation (SMP) and sites with SMP managed with a resorbable membrane.

MATERIALS AND METHODS

One hundred and thirty-nine patients and 170 implants (56 perforation, 114 non-perforation) were included. Cone-beam computed tomography (CBCT) images were taken before surgery (T0), immediately after surgery (T1) and 6 months after surgery (T2). Post-operative augmentation parameters, including endo-sinus bone gain (ESBG) along the implant axis, mean new bone height (NBH) surrounding the implant and augmentation volume (AV), were measured at T1 and T2.

RESULTS

At T1, there were no significant differences in ESBG, NBH and AV between the two groups. At T2, although ESBG did not significantly differ between the two groups, NBH (8.50 ± 1.99 mm vs. 9.99 ± 2.52 mm, p = .039) and AV (519.37 ± 258.38 mm3 vs. 700.99 ± 346.53 mm3, p < .001) were significantly lower in the perforation group. The shrinkage of graft material from T1 to T2, including ΔESBG (p = .002), ΔNBH (p < .001) and ΔAV (p < .001), was higher in the perforation group.

CONCLUSIONS

SMP during LSFE with simultaneous implant placement is associated with greater resorption of the grafted area at a 6-month follow-up.

Anatomical Factors Affecting the Complexity of Maxillary Sinus Augmentation in Saudi Patients: A Cone Beam Computed Tomography (CBCT) Study

AIM

This study aims to evaluate the anatomical variations of the maxillary sinus and determine the difficulty score of maxillary sinus augmentation (MSA) in Saudi patients seeking dental implant rehabilitation of the posterior maxilla using cone beam computed tomography (CBCT).

METHODOLOGY

CBCT records of dental patients seeking treatment at a University Dental Teaching Hospital between 2019 and 2023 were retrospectively analyzed. Measurements were obtained from CBCT images, including membrane thickness, sinus width, buccal bone thickness, presence of maxillary sinus septa, residual alveolar ridge height, angle of the buccolingual sinus wall, and the presence of the alveolar antral artery (AAA). The difficulty score for MSA was determined based on these anatomical factors.

RESULTS

A total of 107 maxillary sinuses in 86 subjects were evaluated. The average membrane thickness was 2.23 mm, with males showing significantly higher thickness than females. Sinus septa were found in 54 (50.5%) sinuses, with 18 (17%) of sinuses having interfering septa. Twenty-three (21.5%) sinuses had a residual alveolar ridge height of less than 4 mm. The average angle of the buccolingual sinus wall was 79.39°, indicating a high prevalence of wide-shaped sinuses. The average sinus width was 14.09 mm, with 55 sinuses (51.4%) less than 15 mm. The average buccal bone thickness was 1.07 mm, in 29 (27%) sinuses, the thickness was more than 2 mm. AAA was visualized in 60 (56%) of sinuses, with 45 (42%) of sinuses having AAA interfering with the MSA window.

CONCLUSIONS

In this study, most sinuses were classified as simple or moderate difficulty, with higher membrane thickness, presence of septa, and AAA being the significant risk factors for complications. These findings provide valuable insights for implant surgeons in Saudi patients seeking dental implant rehabilitation of the posterior maxilla, enabling them to anticipate and minimize potential complications during MSA procedures.

Maxillary sinus membrane perforation rate utilizing osseodensification-mediated transcrestal sinus floor elevation: A multicenter clinical study

PURPOSE

This multicenter cross-sectional clinical study aimed to evaluate the membrane perforation rate during transcrestal sinus floor elevation (TSFE) using osseodensification (OD) burs and assess risk factors associated with the procedure.

MATERIALS AND METHODS

This study was conducted in six centers, following ethical standards and approved by local committees. It included patients over 18 years old missing maxillary posterior teeth with crestal residual bone height (RBH) ≥2 and ≤6 mm. Preoperative evaluations were done, including CBCT scans, to assess bone dimensions and sinus health. All centers and surgeons followed a standardized surgical protocol for TSFE using OD burs. Surgical complications, particularly sinus membrane perforations, were recorded and analyzed. Factors such as implant site, premolars or molars, as well as, healed or fresh socket, along with initial RBH were evaluated for their impact on membrane perforation rate. Descriptive statistics, χ2, and logistic regression analysis were used to analyze the data.

RESULTS

A total of 621 subjects with an average age of 57.9 years were included. Sinus lifting was performed at 670 sites, with 621 implants placed in the maxilla. The majority of sinus lifts were done in the molar region (76.87%) and in healed bone sites (74.33%). The average RBH was 5.1 mm (ranging from 2 to 7 mm). Sinus membrane perforation occurred in 49 cases (7.31%). RBH ≤3 mm posed a risk factor for sinus membrane perforations followed by RBH >3 and ≤5 mm. Tooth region and implant site were not associated as risk factors for sinus membrane perforation.

CONCLUSION

OD drilling used for TSFE resulted in low membrane perforation rate. Challenging scenarios of severe posterior maxillary atrophy presented as risk factors for increased perforation rate.

Rehabilitation Using Implants with Sloped Platform Edge vs. Standard Platform with Guided Bone Regeneration: A Randomized Control Clinical Trial

The purpose of this study was to evaluate the vertical bone loss after using different techniques: sloped implants or standard implants with guided bone regeneration. Patients with tooth gap and horizontal bone deficiency were randomly allocated to the test group (implants with sloped platform-SLP) and control group (standard design implants with guided bone regeneration-GBR). The primary outcome was bone loss (6 months after finishing the prosthetic treatment). Secondary outcomes included the following: patient-reported outcome measures (PROMs), post-operative edema, keratinized mucosa width, and pink aesthetic score (PES). The average bone loss at 6 months was 0.23 ± 0.15 mm and 1.03 ± 0.37 mm in the SLP and GBR groups, respectively. The SLP group was characterized by lower pain intensity the first 7 days (p < 0.001), lower post-operative edema (p < 0.001), lower consumption of NSAIDs on days 1, 3, 5, and 7 (p = 0.002, <0.001, <0.001, and 0.008), and lower total OHIP-14 (p = 0.047) on day 7. The keratinized mucosa width was 3.7 (3.4-4.0) mm and 2 (1.4-2.0) mm in the SLP and GBR groups, respectively. The preservation of the mesial, distal papillae, and the level of soft tissue correspondence were significantly higher in the SLP group (p = 0.003, 0.038, <0.001). In the SLP group, more natural color and better texture of soft tissues were found (p = 0.048, p = 0.041). The use of implants with a sloped platform resulted in superior outcomes compared to the standard-design implants with GBR.

Short (≤6 mm) compared with ≥10-mm dental implants in different clinical scenarios: A systematic review of randomized clinical trials with meta-analysis, trial sequential analysis and quality of evidence grading

AIM

To systematically identify, synthesize and critically summarize the available scientific evidence from randomized controlled trials (RCTs) regarding whether short (≤6 mm) perform as well as long (≥10 mm) implants regarding implant survival, marginal bone loss, and biologic and prosthetic complications in different clinical scenarios.

MATERIALS AND METHODS

Cochrane Collaboration's risk of bias tool and the GRADE approach were applied. Results were synthesized using random-effects meta-analyses assessed by trial sequential analyses.

RESULTS

Forty reports on 19 RCTs comprising 2214 (1097 short; 1117 long) implants were included. Moderate/high certainty/quality evidence demonstrated similar 5-year survival rates for ≤6-mm and ≥10-mm implants in non-augmented bone and full-mouth rehabilitation in either jaw, and for 6-mm implants in the maxilla instead of sinus lift. Nevertheless, the evidence for 5-year survival rates remains inconclusive or insufficient for the remaining combinations of implant lengths and clinical scenarios. They include 4-mm and 5-mm implants as alternatives to sinus lift as well as placing all implant lengths ≤6 mm instead of vertical ridge augmentation with long implants. Marginal bone level and short- and long-term biologic or prosthetic complications were similar.

CONCLUSIONS

Based on moderate/high certainty/quality evidence from 5-year RCTs, implants ≤6 mm may be viable alternatives to ≥10-mm implants in either jaw in native bone and full-arch rehabilitation, and 6-mm implants may be used as an alternative to sinus lift.

TRIAL REGISTRATION

PROSPERO ID: CRD42021254365.

Avoiding Sinus Floor Elevation by Placing a Palatally Angled Implant: A Morphological Study Using Cross-Sectional Analysis Determined by CBCT

BACKGROUNDS

Tooth loss in the posterior maxilla often necessitates dental implant placement, but the maxillary sinus anatomy poses challenges, especially during sinus floor elevation. Mesially angled implants are an alternative for total edentulism, but for single tooth deficiencies, palatally angled implants may offer a solution. This study evaluates the prevalence of avoiding sinus floor elevation by placing palatally angled implants in cases with a single missing tooth.

METHODS

A retrospective study at Ahmet Keleşoğlu Faculty of Dentistry involved 100 participants with a single missing tooth and prior CBCT scans. Virtual implants were placed using OnDemand3D (version 1.0.7462) software. On CBCT sections, implants were angled palatally to avoid sinus or nasal cavity perforation. Statistical analysis was conducted using R and MedCalc (version 4.3.2) software.

RESULTS

Of the participants (60% female, average age 50.45), 76 edentulous regions required sinus elevation. The implant placeability rates varied across zones (second molar: 39.3%, first molar: 63.1%, second premolar: 78.5%). Implant placement at a palatal angle was significantly higher in the second premolar and first molar regions. Statistically significant differences were observed in the implant placeability between regions.

CONCLUSIONS

This study supports the feasibility of avoiding sinus floor elevation through palatally angled implants in specific cases, reducing the associated complications.

Implant stability and clinical outcome between implant placement using internal sinus floor elevation with alloplastic bone material grafting and without grafting: A 1-year randomized clinical trial

OBJECTIVE

To compare implant stability and clinical outcome in implant placement between osteotome sinus floor elevation (OSFE) with biphasic calcium phosphate (BCP) which consisted of 30% of hydroxyapatite (HA) and 70% of beta-tricalcium phosphate (β -TCP) grafting material and OSFE without using bone grafting material. The research questions is whether the BCP provides any benefit in OSFE or not.

MATERIALS AND METHODS

Thirty patients (30 implants) with a single edentulous area of upper premolar or molar were randomly separated into OSFE with BCP (n = 15) and OSFE without grafting (n = 15). The patients were reevaluated 3, 6, 9, and 12 months after implant loading. The clinical assessments (implant stability quotient (ISQ), implant survival-failure rate, and surgical complication) were analyzed. Together with radiographic assessments in 2D (endo-sinus bone gain (ESBG), mean marginal bone change (MMBC)) and 3D (endo-sinus bone gain in CBCT (ESBG-CT)) were evaluated, with a mean follow-up time of at least 12 months of functional loading and prosthetic complication.

RESULTS

20 remaining implants (OSFE with BCP, n = 10; OSFE without grafting, n = 10) were analyzed. Mean ISQ was 79.18 ± 3.43 in 1-year follow-up (ISQ; OSFE with BCP = 78.72 ± 3.46, OSFE without grafting = 79.65 ± 3.52). ISQ in both groups increased steadily without significant differences in each follow-up. (p = 0.56). In radiographic evaluation, at 6-, 9-, and 12-month, OSFE without grafting group showed statistically significant lower MMBC (p < 0.05). The 1-year clinical results showed that 2 implants failed in OSFE with BCP, and 1 implant failed in OSFE without grafting.

CONCLUSIONS

Graft material "BCP" (HA30:TCP70) coupled with OSFE presents no extraordinary benefit in implant stability, clinical and radiographic outcome in 1-year follow-up.

CLINICAL RELEVANCE

Clinically, OSFE with grafting materials provides no additional benefit.

CLINICAL TRIAL REGISTRATION NUMBER

TCTR20210517008 (date of registration: May 17, 2021).

Experimental Study on Rats with Critical-Size Bone Defects Comparing Effects of Autologous Bone Graft, Equine Bone Substitute Bio-Gen® Alone or in Association with Platelet-Rich Fibrin (PRF)

BACKGROUND

A critical-sized bone defect (CsBD) is considered one that will not heal spontaneously and requires reconstruction. This study aims to compare the results of using different bone reconstructive techniques and to study the potential of platelet-rich fibrin (PRF) to enhance the healing properties of a bone substitute (BS).

METHODS

In this experimental study on rats, the treatment of critical-sized bone defects was carried out by analysing four groups: a control group in which the bone defect was left empty; a group treated with Bio-Gen®; another group in which the defect was treated with PRF in combination with Bio-Gen®; and the last that was treated with autologous bone graft (ABG). The defects were evaluated by microcomputed tomography (µCT) and then histomorphometrically.

RESULTS

From both the histological and imagistic point of view, the best results were registered in the ABG group, followed by the group treated with Bio-Gen® with PRF, Bio-Gen® group, and control group, with statistically significant differences.

CONCLUSIONS

A 5 mm defect in the rat radius can be considered critical. ABG showed the best results in treating the bone defect. PRF significantly enhanced the efficacy of Bio-Gen®.

Radiographic Study of Transcrestal Sinus Floor Elevation Using Osseodensification Technique with Graft Material: A Pilot Study

This pilot study aimed to evaluate the level of implant success after transcrestal sinus floor elevation (tSFE) using the osseodensification technique (OD) combined with beta-tricalcium phosphate (β-TCP) by analyzing clinical and radiographic results. Moreover, the increase in bone height was analyzed immediately after surgery, 3 months after, and before loading by taking standardized radiographic measurements. Thirteen patients, four males and nine females, with a mean age of 54.69 ± 5.86 years, requiring the placement of one implant in the upper posterior maxilla, with a residual bone height of <8 mm and a minimum bone width of 5 mm, participated in the study. The bone gain data was obtained using cone-beam computed tomography (CBCT) immediately after surgery and twelve months after the placement. The correlation between initial and final bone height with implant stability was also assessed. The results were analyzed using SPSS 23 software (p < 0.05). The results of the study indicated a 100% implant success rate after a follow-up period of twelve months. Preoperative main bone height was 5.70 ± 0.95 mm. The osseodensification technique allowed a significant increase of 6.65 ± 1.06 mm immediately after surgery. After a twelve-month follow-up, a graft material contraction of 0.90 ± 0.49 mm was observed. No correlation was observed between the bone height at the different times of the study and the primary stability of the implant. Considering the limitations of the size sample of this study, the osseodensification technique used for transcrestal sinus lift with the additional bone graft material (β-TCP) may provide a predictable elevation of the maxillary sinus floor, allowing simultaneous implant insertion with adequate stability irrespective of bone height limitations.

Maxillary sinus augmentation via the bone lid technique: A prospective, radiographic case series

BACKGROUND

Maxillary sinus augmentation is one of the most performed procedures to increase the bone quantity of the atrophic maxilla to allow implant placement. The aim of the present case series was to describe a surgical protocol to perform maxillary sinus augmentation with the "bone lid technique," and its outcomes in a cohort of patients eligible for the procedure.

METHODS

After the initial clinical evaluation, a cone-beam computed tomography (CBCT) examination was performed for preoperative assessment. Patients were then scheduled for surgical intervention. At 6-9 months follow-up, patients underwent a second CBCT scan to evaluate bone height following bone graft and to schedule implant placement.

RESULTS

A total of 11 patients were enrolled in the study with a total of 13 sinus lift procedures. Membrane perforation was registered in 4 cases (30.76%). Mean surgical time was 67.69 min (SD 6.51). Postoperative period was uneventful in all patients, in the absence of complications. The mean graft volume increase was 2.46 cm3 (SD 0.85), and the mean height increase was 14.27 mm (SD 3.18). Mean membrane thickness was 1.40 mm (SD 0.75). In all the 4 cases with sinus membrane perforation, the membrane had a thickness lower than 1 mm.

CONCLUSIONS

The present study highlights that the maxillary sinus augmentation with bone lid repositioning could provide repeatable results in terms of bone height increase. The technique appears reliable both in terms of bone gain and absence of complications.

KEY POINTS

The bone lid technique for maxillary sinus augmentation provides repeatable results in terms of bone height increase. The favorable clinical outcomes can be related to an enhancement of bone formation due to the unique osteoconductive and osteoinductive properties of autogenous bone, along with a reduction of soft tissue ingrowth. Complications were not observed in any of the patients following the surgical procedures. The risk of Schneiderian membrane perforation is inversely proportional to membrane thickness; the thinner the membrane is, the higher the risk to perforate it.

Three-Dimensional Printed Patient-Specific Vestibular Augmentation: A Case Report

Background: The anterior maxilla is challenging regarding aesthetic rehabilitation. Current bone augmentation techniques are complex and 3D-printed bioceramic bone grafts can simplify the intervention. Aim: A four-teeth defect in the anterior maxilla was reconstructed with a 3D-printed synthetic patient-specific bone graft in a staged approach for dental implant delivery. Methods: The bone graft was designed using Cone-Beam Computed Tomography (CBCT) images. The bone graft was immobilized with fixation screws. Bone augmentation was measured on CBCT images at 11 days and 8 and 13 months post-surgery. A biopsy sample was retrieved at reentry (10 months post-augmentation) and evaluated by histological and micro-computed tomography assessments. The definitive prosthesis was delivered 5 months post-reentry and the patient attended a visit 1-year post-loading. Results: A total bone width of 8 mm was achieved (3.7 mm horizontal bone gain). The reconstructed bone remained stable during the healing period and was sufficient for placing two dental implants (with an insertion torque > 35 N·cm). The fractions of new bone, bone graft, and soft tissue in the biopsy were 40.77%, 41.51%, and 17.72%, respectively. The histological assessment showed no signs of encapsulation, and mature bone was found in close contact with the graft, indicating adequate biocompatibility and suggesting osteoconductive properties of the graft. At 1-year post-loading, the soft tissues were healthy, and the dental implants were stable. Conclusions: The anterior maxilla's horizontal ridge can be reconstructed using a synthetic patient-specific 3D-printed bone graft in a staged approach for implant placement. The dental implants were stable and successful 1-year post-loading.

Platelet-rich fibrin as an autologous biomaterial for bone regeneration: mechanisms, applications, optimization

Platelet-rich fibrin, a classical autologous-derived bioactive material, consists of a fibrin scaffold and its internal loading of growth factors, platelets, and leukocytes, with the gradual degradation of the fibrin scaffold and the slow release of physiological doses of growth factors. PRF promotes vascular regeneration, promotes the proliferation and migration of osteoblast-related cells such as mesenchymal cells, osteoblasts, and osteoclasts while having certain immunomodulatory and anti-bacterial effects. PRF has excellent osteogenic potential and has been widely used in the field of bone tissue engineering and dentistry. However, there are still some limitations of PRF, and the improvement of its biological properties is one of the most important issues to be solved. Therefore, it is often combined with bone tissue engineering scaffolds to enhance its mechanical properties and delay its degradation. In this paper, we present a systematic review of the development of platelet-rich derivatives, the structure and biological properties of PRF, osteogenic mechanisms, applications, and optimization to broaden their clinical applications and provide guidance for their clinical translation.

An Overview on the Big Players in Bone Tissue Engineering: Biomaterials, Scaffolds and Cells

Presently, millions worldwide suffer from degenerative and inflammatory bone and joint issues, comprising roughly half of chronic ailments in those over 50, leading to prolonged discomfort and physical limitations. These conditions become more prevalent with age and lifestyle factors, escalating due to the growing elderly populace. Addressing these challenges often entails surgical interventions utilizing implants or bone grafts, though these treatments may entail complications such as pain and tissue death at donor sites for grafts, along with immune rejection. To surmount these challenges, tissue engineering has emerged as a promising avenue for bone injury repair and reconstruction. It involves the use of different biomaterials and the development of three-dimensional porous matrices and scaffolds, alongside osteoprogenitor cells and growth factors to stimulate natural tissue regeneration. This review compiles methodologies that can be used to develop biomaterials that are important in bone tissue replacement and regeneration. Biomaterials for orthopedic implants, several scaffold types and production methods, as well as techniques to assess biomaterials' suitability for human use-both in laboratory settings and within living organisms-are discussed. Even though researchers have had some success, there is still room for improvements in their processing techniques, especially the ones that make scaffolds mechanically stronger without weakening their biological characteristics. Bone tissue engineering is therefore a promising area due to the rise in bone-related injuries.

Utilization of Tenting Pole Abutments for the Reconstruction of Severely Resorbed Alveolar Bone: Technical Considerations and Case Series Reports

INTRODUCTION

Although various surgical techniques have been utilized in the reconstruction of severely resorbed alveolar bone, its regeneration is still regarded as a major challenge. Most of the surgical techniques used in advanced ridge augmentation have the disadvantages of prolonging the patient's edentulous healing and increasing the need for surgical revisits because simultaneous implant placement is not allowed. This report presents a new and simplified method for advanced ridge augmentation, which utilizes a vertical tenting device.

CASE PRESENTATION

The first case presented the reconstruction of the mandibular posterior region with severely resorbed alveolar bone due to peri-implantitis using tenting pole abutment for ridge augmentation. The second and third cases presented three-dimensional ridge augmentations in severely resorbed ridges due to periodontitis. The last case presented horizontal ridge augmentation using a vertical tenting device. All cases were performed under local anesthesia. Implants were simultaneously placed in the bone defect area. A vertical tensioning device was then connected to the implant platform to minimize the collapse of the bone graft during the bone regeneration period due to the contraction of the soft tissue matrix. A sticky bone graft was transplanted onto the exposed surface of the implant and on top of the vertical tensioning device. After covering with an absorbable barrier membrane, the soft tissues were sutured without tension.

CONCLUSIONS

In all cases, prosthetic restorations were provided to patients after a bone grafting period of 5-6 months, leading to a rapid restoration of masticatory function. Results tracked for up to 6 years revealed observed stable reconstruction of the alveolar bone. The use of a vertical tenting device can prevent the collapse of biomaterials in the augmented ridge during the healing period, leading to predictable outcomes when achieving three-dimensional ridge augmentation.

Full Arch Implant-Prosthetic Rehabilitation in Patients with Cardiovascular Diseases: A 7-Year Follow-Up Prospective Single Cohort Study

Aim: The rising average age increases edentulous cases, demanding more implant-prosthetic rehabilitation, with cardiovascular diseases being significant factors. This study compared healthy patients (CG = Control Group) and those with cardiovascular disease (TG = Test Group) for implant survival, Marginal Bone Loss (MBL), peri-implant tissue level parameters as Periodontal Screening and Recording (PSR), Plaque Index (PI), Bleeding on Probing (BoP) Peri-implant Probing Depth (PPD), and surgical complications. Smoking impact on both groups and medication influence in the TG were secondary outcomes. Patients underwent full-arch implant prosthetic rehabilitation. Methods: Implant survival rate, MBL, and surgical complications were recorded during the monitoring period (7 years), while peri-implant parameters were assessed at the end of the observational time. A total of 26 and 28 CG and TG patients were recruited, respectively. Results: A total of 128 implants were placed in CG, while 142 in the TG. Implant survival and MBL showed no significant differences (p > 0.05). Nevertheless, peri-implant parameters were more unfavorable in TG. The only significant surgical complication was higher bleeding rates in the TG (p < 0.05). Conclusions: Cardiovascular patients showed similar implant survival and MBL but had adverse peri-implant parameters and increased bleeding rates. Higher smoking levels may relate to unfavorable implant outcomes. Further investigation is needed on drug impact with larger samples.

Diagnostic reliability and accuracy of the hydraulic contrast lift protocol in the radiographic detection of sinus lift and perforation: ex vivo randomized split-mouth study in an ovine model

OBJECTIVES

Assessing the diagnostic reliability, validity, and accuracy of the hydraulic contrast lift protocol during transcrestal sinus floor elevation in detecting the lift and perforation of the sinus membrane before graft material application and assessing the effect of its use on the operator's diagnostic confidence.

MATERIAL AND METHODS

A single-blind randomized split-mouth study on fresh refrigerated sheep heads. The first intervention consisted of injecting 0.5 ml iodinated contrast medium on the test side and 0.5 ml saline on the control side. In the second intervention artificial sinus membrane perforations were created followed by injecting 0.5 ml iodinated contrast medium on the test side and 0.5 ml saline on the control side. Intraoperative periapical radiographs were taken for both interventions. The resulting 40 radiographs were assessed by 10 examiners to provide interpretations and confidence ratings. The primary endpoints were diagnostic reliability, validity, accuracy, and perceived diagnostic confidence.

RESULTS

In the hydraulic contrast lift protocol, the detection rate was 99% for sinus elevations and 98% for perforations, the saline protocol yielded a detection rate of 28% and 20% respectively. The hydraulic contrast lift protocol demonstrated a high level of inter-rater agreement for the diagnosis of elevations (p < 0.001) and perforations (p < 0.001), strong diagnostic validity for the diagnosis of elevations (p < 0.001) and perforations (p < 0.001), high sensitivity and specificity (p < 0.001) and higher mean diagnostic confidence ratings for both interventions when compared to the saline protocol (p < 0.001). The difference between the predicted probability for correct diagnosis of the hydraulic contrast lift protocol and the saline protocol was significant (p < 0.001) for the detection of both elevations and perforations.

CONCLUSION

Following the hydraulic contrast lift protocol, the use of a radiographic contrast medium can reliably confirm sinus membrane lift and detect perforation during transcrestal sinus floor elevation prior to bone graft application in addition to improving the diagnostic confidence of the operator while relying on periapical radiographs.

[Elimination of defects in the Schneiderian membrane during sinus lift operations]

PURPOSE

Evaluation of the effectiveness of a new method of plasty of an extensive defect in the mucous membrane of the Schneiderian membrane, which occurs during the sinus lift operation, using an artificial collagen membrane and a developed method for fixing it.

MATERIAL AND METHODS

A total of 188 patients took part in the study, all of these patients underwent an open sinus lift operation with simultaneous or delayed implantation. Operations were performed under balanced anesthesia. Six months after the operation, according to computed tomography, the height of the formed bone regenerate was estimated. In the area of each missing tooth, the initial bone height and the resulting bone grafting were assessed. Then we compared the average values before and after the operation, the average height difference before and after the operation.

RESULTS

In 19 patients during the sinus lift there was an accidental extensive rupture of the mucous membrane of the maxillary sinus. Elimination of the mucosal defect was carried out according to our patented method. All 188 patients were diagnosed with partial loss of teeth with bone tissue deficiency in the distal maxillary sinus. The height of the alveolar process in the projection of missing teeth ranged from 0.5 mm to 5 mm. Delayed dental implantation was performed when the height of the alveolar bone was less than 3 mm, direct when the presence of 3-5 mm. After 6 months, dental implants were installed in the reconstruction zone, after another 6 months - rational prosthetics.

CONCLUSIONS

The proposed method of plastic surgery has the following advantages. Firstly, it allows to eliminate the defect of the mucous membrane together with an increase in the height of the alveolar ridge. Secondly, after this method, the integrity of the mucous membrane will be restored. Thirdly, with an alveolar bone height of 3 mm or more, dental implants should also be installed.

Multipotent Mesenchymal Cells Homing and Differentiation on Poly(ε-caprolactone) Blended with 20% Tricalcium Phosphate and Polylactic Acid Incorporating 10% Hydroxyapatite 3D-Printed Scaffolds via a Commercial Fused Deposition Modeling 3D Device

As highlighted by the 'Global Burden of Disease Study 2019' conducted by the World Health Organization, ensuring fair access to medical care through affordable and targeted treatments remains crucial for an ethical global healthcare system. Given the escalating demand for advanced and urgently needed solutions in regenerative bone procedures, the critical role of biopolymers emerges as a paramount necessity, offering a groundbreaking avenue to address pressing medical needs and revolutionize the landscape of bone regeneration therapies. Polymers emerge as excellent solutions due to their versatility, making them reliable materials for 3D printing. The development and widespread adoption of this technology would impact production costs and enhance access to related healthcare services. For instance, in dentistry, the use of commercial polymers blended with β-tricalcium phosphate (TCP) is driven by the need to print a standardized product with osteoconductive features. However, modernization is required to bridge the gap between biomaterial innovation and the ability to print them through commercial printing devices. Here we showed, for the first time, the metabolic behavior and the lineage commitment of bone marrow-derived multipotent mesenchymal cells (MSCs) on the 3D-printed substrates poly(e-caprolactone) combined with 20% tricalcium phosphate (PCL + 20% β-TCP) and L-polylactic acid (PLLA) combined with 10% hydroxyapatite (PLLA + 10% HA). Although there are limitations in printing additive-enriched polymers with a predictable and short half-life, the tested 3D-printed biomaterials were highly efficient in supporting osteoinductivity. Indeed, considering different temporal sequences, both 3D-printed biomaterials resulted as optimal scaffolds for MSCs' commitment toward mature bone cells. Of interest, PLLA + 10% HA substrates hold the confirmation as the finest material for osteoinduction of MSCs.

Resorbable GBR Scaffolds in Oral and Maxillofacial Tissue Engineering: Design, Fabrication, and Applications

Guided bone regeneration (GBR) is a promising technique in bone tissue engineering that aims to replace lost or injured bone using resorbable scaffolds. The promotion of osteoblast adhesion, migration, and proliferation is greatly aided by GBR materials, and surface changes are critical in imitating the natural bone structure to improve cellular responses. Moreover, the interactions between bioresponsive scaffolds, growth factors (GFs), immune cells, and stromal progenitor cells are essential in promoting bone regeneration. This literature review comprehensively discusses various aspects of resorbable scaffolds in bone tissue engineering, encompassing scaffold design, materials, fabrication techniques, and advanced manufacturing methods, including three-dimensional printing. In addition, this review explores surface modifications to replicate native bone structures and their impact on cellular responses. Moreover, the mechanisms of bone regeneration are described, providing information on how immune cells, GFs, and bioresponsive scaffolds orchestrate tissue healing. Practical applications in clinical settings are presented to underscore the importance of these principles in promoting tissue integration, healing, and regeneration. Furthermore, this literature review delves into emerging areas of metamaterials and artificial intelligence applications in tissue engineering and regenerative medicine. These interdisciplinary approaches hold immense promise for furthering bone tissue engineering and improving therapeutic outcomes, leading to enhanced patient well-being. The potential of combining material science, advanced manufacturing, and cellular biology is showcased as a pathway to advance bone tissue engineering, addressing a variety of clinical needs and challenges. By providing this comprehensive narrative, a detailed, up-to-date account of resorbable scaffolds' role in bone tissue engineering and their transformative potential is offered.

Evaluation of crestal sinus floor elevation in cases exhibiting an oblique sinus floor with a residual bone height of 4.0-7.0 mm using Densah burs with simultaneous implant placement: a prospective clinical study

PURPOSE

To evaluate the effectiveness of using Densah burs for lifting the maxillary sinus membrane in cases with an oblique sinus floor with a residual bone height of 4-7 mm.

METHODS

The study was conducted on 16 patients, comprising 9 males and 7 females, aged 25-60 years, split into two groups of 8 each: group I with a residual bone height of 4-5.5 mm below the sinus floor and group II with a residual bone height of 5.5-7 mm. Exclusion criteria included smokers, presence of systemic or metabolic conditions that contraindicate implant placement and a local sinus pathology. The study involved the use of Densah burs, using the osseodensification concept to elevate the sinus floor, along with simultaneous dental implant placement. The integrity of the sinus membrane was verified via clinical examination and a confirmatory cone beam computed tomography scan.

RESULTS

The study revealed that out of the 16 cases, one case had a sinus membrane perforation, confirmed clinically at the time of the operation. The study achieved a mean lift of 4.42 mm and a mean final seating torque of 35.5 N/cm. At the 1-year follow-up, all cases showed clinical success, with no signs of sinus pathology or complications.

CONCLUSIONS

In cases with oblique sinus floors and a residual bone height of 4-7 mm in moderately atrophic posterior maxilla, the osseodensification concept proved to be a safe and effective method for performing sinus lift procedures with simultaneous implantation.

Maxillary Sinus Lift Procedures: An Overview of Current Techniques, Presurgical Evaluation, and Complications

A maxillary sinus lift procedure is indicated if a dental implant needs to be placed in the posterior maxilla with limited bone available to accommodate a dental implant. Both open and closed sinus lifting procedures are reliable approaches for increasing the bone volume needed to support proper implant positioning. However, these methods can lead to several complications. In addition to the general complications commonly linked to oral surgery, such as swelling or hematoma, the primary complication in open sinus lifting is typically the perforation of the Schneiderian membrane during osteotomy. Detailed and extensive presurgical evaluation is crucial to minimize such complications. The objective of this study was to delineate contemporary trends in sinus lift surgery, with a specific emphasis on different techniques of sinus lift procedure, anatomical and surgical factors, presurgical evaluation, bone grafting, and the practical implications of these factors in implant dentistry cases involving a deficient posterior maxilla. In conclusion, while both osteotome and lateral window techniques can assist clinicians in addressing the complexities of implant placement in a deficient posterior maxilla, bone height before implantation remains a critical factor in determining the success and longevity of implants.

Clinical, radiographic, and histological/histomorphometric analysis of maxillary sinus grafting with deproteinized porcine or bovine bone mineral: A randomized clinical trial

OBJECTIVE

The present study aimed to compare histomorphometrically evaluated new bone formation, radiographically measured graft stability, and clinical implant outcome between maxillary sinus grafting with either deproteinized porcine bone mineral (DPBM) or deproteinized bovine bone mineral (DBBM).

MATERIALS AND METHODS

Thirty maxillary sinuses were initially included and randomly assigned to the test group (TG; DPBM, n = 15) or control group (CG; DBBM, n = 15). After a healing period (6 months), axially retrieved bone biopsies of the molar region were used for histological/histomorphometric analysis of new bone formations. Additionally, radiographically measured graft stability and clinical implant outcome were assessed.

RESULTS

Twenty-three sinus sites with 10 sinuses of the TG and 13 of the CG were ultimately available for data and statistical analysis. In the TG, a slightly, but yet significantly (p = .040) higher proportion of new bone formation (TG: 27.7 ± 5.6% vs. CG: 22.9 ± 5.1%) and a lesser (p = .019) amount of connective (non-mineralized) tissue (TG: 47.5 ± 9.5% vs. CG: 56.1 ± 9.5%) was found than in the CG. However, both xenografts showed comparable (n.s.) residual bone graft (TG: 23.7 ± 7.2% vs. CG: 21.1 ± 9.85.6%), bone-to-graft contacts (TG: 26.2 ± 9.8% vs. CG: 30.8 ± 13.8%), similar graft height reduction over time (TG: 12.9 ± 6.7% CG: 12.4 ± 5.8%) and implant survival/success rate (100%). At the 3-year post-loading evaluation, the peri-implant marginal bone loss (TG: 0.52 ± 0.19 mm; CG: 0.48 ± 0.15 mm) and the peri-implant health conditions (TG: 87.5%/CG: 81.2%) did not differ between implants inserted in both xenografts used.

CONCLUSIONS

The use of DPBM or DBBM for maxillary sinus augmentation is associated with comparable bone formation providing stable graft dimension combined with healthy peri-implant conditions.

Sinus floor augmentation using crestal approach in conjunction with hydroxyapatite/cross-linked collagen sponge: A pilot study

BACKGROUND

Different biomaterials were suggested for sinus floor augmentation (SFA). Recently, new materials were launched showing true bone formation without remnants.

PURPOSE

The aim of this prospective study was to evaluate an hydroxyapatite-based, sugar cross-linked collagen sponge (OSSIX™ Bone) in transcrestal SFA (t-SFA).

MATERIALS AND METHODS

Twenty-four patients with edentulous posterior maxilla and residual bone height (RBH) >4 mm underwent t-SFA with OSSIX™ Bone as grafting material and simultaneous implant placement. The implant Stability Quotient (ISQ) was measured by resonance frequency analysis (RFA) directly after implant insertion and at 6 months. Differences in bone height (BH) and volume were determined in CBCT and x-rays at baseline versus 1 year of follow-up. Graft volume was evaluated by tridimensional reconstructions. Linear regression analysis was used to evaluate the effect of bucco-palatal sinus dimension, RBH, and length of the implant protruding (PIL) into the sinus, on the graft height (GH) changes up to 1 year, and on the graft volume at 1 year. Autocorrelation between time lag and augmented bone volume was evaluated through time series analysis correlograms. Health-related quality-of-life outcomes were captured.

RESULTS

Twenty-two patients completed the study. The mean RBH measured at baseline was 5.81 ± 2.2 mm. The mean graft volume was 1085.8 ± 733.4 mm3 . The mean GH, measured in the immediate post-operative period, at 6 and 12 months respectively, was 7.24 mm ±1.94; 6.57 mm ± 2.30; 5.46 mm ± 2.04. The mean ISQ measured after the implant placement was 62.19 ± 8.09, and 6 months later was 76.91 ± 4.50. There was a significant correlation between buccolingual dimension and graft volume at 1 year. Neither buccolingual volume nor RBH had a significant effect on GH change, while the PIL showed a significant positive correlation (P = 0.02 and P = 0.03 at 6 and 12 months, respectively). The correlograms indicated no significant correlation, meaning that there is no tendency for graft volume to increase or decrease over time, therefore suggesting graft stability, at least up to one year of follow-up. 86% of patients had no chewing interference.

CONCLUSION

Within the limitations of the study, OSSIX™ Bone could be considered a valid material for SFA due to its manageability and its positive results in promoting new bone formation with long-term stability. T-SFA is confirmed as a less invasive and less painful method.

Treatment alternatives for the rehabilitation of the posterior edentulous maxilla

Rehabilitation of the edentulous maxilla with implant-supported fixed dental prostheses can represent a significant clinical challenge due to limited bone availability and surgical access, among other factors. This review addresses several treatment options to replace missing teeth in posterior maxillary segments, namely the placement of standard implants in conjunction with maxillary sinus floor augmentation, short implants, tilted implants, and distal cantilever extensions. Pertinent technical information and a concise summary of relevant evidence on the reported outcomes of these different therapeutic approaches are presented, along with a set of clinical guidelines to facilitate decision-making processes and optimize the outcomes of therapy.

The Effectiveness and Practicality of a Novel Barrier Membrane for the Open Window in Maxillary Sinus Augmentation with a Lateral Approach, with Risk Indicators for Bone Graft Displacement and Bone Height Decrease: A Prospective Study in Humans

Maxillary sinus augmentation with a lateral approach (MSA) is a well-established treatment. In this prospective study, we evaluated risk factors for postoperative bone graft displacement and reported the clinical application of long-term resorbable L-lactic acid/-caprolactone (PLA/PCL) as a barrier membrane to cover the open window in the lateral wall in MSA. Twenty-four patients underwent MSA according to the relevant criteria; CT data obtained before and 1 week (1 w) and 5-6 months (5 m) post-MSA, bone height changes, bone height reduction rates at 1 w and 5 m post-MSA, bone graft displacement measurements, and risk factors were examined. All patients showed bone height increments (p < 0.005). However, no difference was observed between 1 w and 5 m post-MSA. Bone graft displacement was observed in eight patients; the reduction rate from 1 w to 5 m post-MSA was 8.38% ± 4.88%. Sex, septa, maxillary sinus floor-palatal bone distance, and maxillary sinus floor-maxillary ostium distance were associated with bone graft displacement (p < 0.05). The height from the maxillary sinus floor to the palatal bone and the sinus angle influenced the augmentation degree (p < 0.05). The PLA/PCL membrane is compared favorably with other membranes and may be useful as a barrier membrane for the MSA open window.

SMOKERS MAY BE SUBJECT TO A HIGHER RISK OF SCHNEIDERIAN MEMBRANE PERFORATION THAN NONSMOKERS DURING MAXILLARY SINUS AUGMENTATION

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION

Association between smoking and Schneiderian membrane perforation during maxillary sinus floor augmentation: A systematic review and meta-analysis. Wang, X., Ma, S., Lin, L., & Yao, Q. Clinical Implant Dentistry and Related Research. 2022., 25.1: 166-176.

SOURCE OF FUNDING

National Natural Science Foundation of China, Grant/Award Number: 81801021; Hunan Provincial Health Commission, Grant/Award Number: B202308056991.

TYPE OF STUDY/DESIGN

Systematic review and meta-analysis.

Correlation between periodontal phenotype and sinus membrane thickness: A systematic review

AIM

To assess the correlation between the periodontal phenotype (PP) and sinus membrane thickness (SMT) in humans.

METHODS

This review was conducted according to the PRISMA guidelines. Two reviewers independently carried out electronic and manual literature searches of studies published in English, German, and Spanish, from 1970 to September 2022 in four electronic databases, PubMed/Medline, Scopus, Cochrane Library, and Web of Science, in addition to gray literature. Studies that assessed the correlation between PP and SMT in adults (aged 18 years) were included. Methodological quality was evaluated using the Appraisal Tool for Cross-Sectional Studies (AXIS) for articles that met the eligibility criteria.

RESULTS

Six studies, including 510 patients, were considered for qualitative analysis. All included studies were cross-sectional, and the correlation between the PP and SMT was evaluated, finding a positive and high correlation in 83.3% of them, based on a value of ≥0.7. All the included studies were assessed with a high overall risk of bias.

CONCLUSIONS

Periodontal phenotype and sinus membrane thickness are likely correlated. Nevertheless, further standardized studies are required to draw definitive conclusions.

FOXO1 regulates osteogenic differentiation of periodontal ligament stem cells through the METTL3 signaling pathway

BACKGROUND

Periodontitis is a chronic inflammation that occurs in periodontal tissue and has a high incidence rate. Periodontal ligament stem cells (PDLSCs) are ideal candidates for periodontal tissue and bone regeneration in patients with periodontitis. The purpose of this work was to analyze the molecular mechanisms that affect the osteogenic differentiation of PDLSCs.

METHODS

In this work, qRT‒PCR was used to detect the mRNA expression level of FOXO1 in clinical tissues and PDLSCs. Alkaline phosphatase (ALP) staining and Alizarin red S (ARS) staining were used to detect the degree of osteogenic differentiation of PDLSCs. qRT‒PCR and western blotting were used to measure the levels of the early osteogenic markers COL1A1 and RUNX2. The JASPAR online database was used to predict FOXO1-regulated genes.

RESULTS

FOXO1 was generally expressed at low levels in clinical samples from patients with periodontitis. We provided evidence that overexpression of FOXO1 promoted osteogenic differentiation in PDLSCs. In addition, both in vitro and rescue experiments showed that FOXO1 regulated METTL3. FOXO1 affected osteogenic differentiation mainly by regulating METTL3 modification of the PI3K/AKT pathway.

CONCLUSIONS

FOXO1 activated the PI3K/AKT signaling pathway by transcriptionally activating METTL3. This effect promoted the osteogenic differentiation of PDLSCs.

Immediate dental implantation after indirect sinus elevation using osseodensification concept: a case report

Implantation in the posterior maxilla is more challenging due to the insufficient bone height after maxillary sinus pneumatization and the low bone density. Osseodensification (OD) is considered a novel, less invasive, and more effective indirect sinus floor elevation technique.

CASE PRESENTATION

A 52-year-old male presented to the oral and maxillofacial surgery department with a main complaint of chewing difficulties in the right posterior area maxilla (teeth numbers: 26 and 27). A cone-beam computed tomography (CBCT) imaging showed that the residual bone height ranged between 1 and 4 mm and the width ranged between 9 and 12 mm in the area of teeth numbers 16 and 17.

INTERVENTION AND OUTCOME

The treatment plan was to extract the teeth (numbers: 16 and 17) and conduct internal sinus lifting and bone grafting using the OD burs with immediate implantation.

CLINICAL DISCUSSION

OD is proposed as an alternative procedure to the direct (lateral window) sinus floor elevation procedure. The amount of vertical bone gain obtained by this technique in transcrestal sinus lifting can be the same as external sinus lifting in this case.

CONCLUSION

OD can be considered a promising technique for direct sinus floor elevation, considering the amount of vertical bone gain obtained by this technique.

New Implant Materials

In the last forty years, dental implantology has become a widespread worldwide clinical practice in medicine, able to rehabilitate partial or full human edentulism of the jaw and highly successful over the long term [...].

CBCT for Diagnostics, Treatment Planning and Monitoring of Sinus Floor Elevation Procedures

Sinus floor elevation (SFE) is a standard surgical technique used to compensate for alveolar bone resorption in the posterior maxilla. Such a surgical procedure requires radiographic imaging pre- and postoperatively for diagnosis, treatment planning, and outcome assessment. Cone beam computed tomography (CBCT) has become a well-established imaging modality in the dentomaxillofacial region. The following narrative review is aimed to provide clinicians with an overview of the role of three-dimensional (3D) CBCT imaging for diagnostics, treatment planning, and postoperative monitoring of SFE procedures. CBCT imaging prior to SFE provides surgeons with a more detailed view of the surgical site, allows for the detection of potential pathologies three-dimensionally, and helps to virtually plan the procedure more precisely while reducing patient morbidity. In addition, it serves as a useful follow-up tool for assessing sinus and bone graft changes. Meanwhile, using CBCT imaging has to be standardized and justified based on the recognized diagnostic imaging guidelines, taking into account both the technical and clinical considerations. Future studies are recommended to incorporate artificial intelligence-based solutions for automating and standardizing the diagnostic and decision-making process in the context of SFE procedures to further improve the standards of patient care.

Implant rehabilitation of a posterior maxilla with 4-mm long implants splinted to a 10-mm long implant in a patient with osteopenia taking antiresorptive drugs: A 5-year follow-up case report

The report describes the rehabilitation of a maxillary arch with limited bone volume in a 67-year-old female taking antiresorptives due to osteopenia. One 10-mm and two extra-short 4-mm implants were inserted, and implant-supported splinted crowns were fabricated. The 5-year follow-up showed stable bone levels, despite poor initial stability (ISQ: 14-51).

Tackling Inequalities in Oral Health: Bone Augmentation in Dental Surgery through the 3D Printing of Poly(ε-caprolactone) Combined with 20% Tricalcium Phosphate

The concept of personalized medicine and overcoming healthcare inequalities have become extremely popular in recent decades. Polymers can support cost reductions, the simplicity of customized printing processes, and possible future wide-scale expansion. Polymers with β-tricalcium phosphate (TCP) are well known for their synergy with oral tissues and their ability to induce osteoconductivity. However, poor information exists concerning their properties after the printing process and whether they can maintain an unaffected biological role. Poly(ε-caprolactone) (PCL) polymer and PCL compounded with TCP 20% composite were printed with a Prusa Mini-LCD-®3D printer. Samples were sterilised by immersion in a 2% peracetic acid solution. Sample analyses were performed using infrared-spectroscopy and statical mechanical tests. Biocompatibility tests, such as cell adhesion on the substrate, evaluations of the metabolic activity of viable cells on substrates, and F-actin labelling, followed by FilaQuant-Software were performed using a MC3T3-E1 pre-osteoblasts line. PCL+β-TCP-20% composite is satisfactory for commercial 3D printing and appears suitable to sustain an ISO14937:200937 sterilization procedure. In addition, the proper actin cytoskeleton rearrangement clearly shows their biocompatibility as well as their ability to favour osteoblast adhesion, which is a pivotal condition for cell proliferation and differentiation.

A Combination of Platelet-Rich Fibrin and Collagen Membranes for Sinus Membrane Repair: A Case Report (Repair of Sinus Membrane Perforation)

Maxillary sinus lift surgery is applied to compensate for the reduced vertical height in the posterior maxilla to facilitate placing a dental implant of a suitable length. Pathological conditions may be accidentally discovered, which necessitate careful assessment and management to prevent the infection of the maxillofacial complex and eventually bone grafting and dental implant failure. This case report describes an approach for the management of Schneiderian membrane perforation associated with the removal of an antral pseudocyst for successful dental implant therapy. A 70-year-old healthy Caucasian male presented for implant therapy to replace a non-restorable maxillary molar. Initial examination revealed the need for a sinus lift procedure to prepare the site for implant placement. A 3D CBCT evaluation before surgery revealed an incidental finding of a pathological lesion at the surgical site. The histological analysis of a biopsy specimen retrieved during implant site preparation showed findings consistent with antral pseudocyst. The resulting perforation of the sinus membrane was treated, and an adequate period of healing was given. A thickened sinus membrane was detected upon surgical exposure for implant placement. The novel technique illustrated could result in a fibrotic repaired sinus membrane and help shorten the time required for dental implant treatment.

15-Year Retrospective Study on the Success Rate of Maxillary Sinus Augmentation and Implants: Influence of Bone Substitute Type, Presurgical Bone Height, and Membrane Perforation during Sinus Lift

Objectives

To evaluate the success rate of bone grafts and implants carried out at the Latin American Institute for Research and Dental Education (ILAPEO), considering the following: (i) the different pure bone substitutes (autogenous, xenogeneic, and alloplastic), (ii) the presurgical bone height, and (iii) how the treatment is compromised when membrane perforation occurs during sinus lift in maxillary sinus surgeries. Material and Methods. The initial sample comprised 1040 records of maxillary sinus lifting surgeries. After evaluation, the final sample retained 472 grafts performed using the lateral window technique with a total of 757 implants. The grafts were divided into 3 groups: (i) autogenous bone (n = 197), (ii) xenogenous bovine bone (n = 182), and (iii) alloplastic material (n = 93). One calibrated examiner classified the sample into two groups based on the residual bone height (<4 mm and ≥4 mm) of the area of interest measured on parasagittal sections of tomographic images. Data on membrane perforation occurrences in each group were collected; qualitative variables were described using frequency, expressed as percentages. The Chi-square test was used to analyze the success of the graft types and the survival rate of the implants as a function of the grafted material and the residual bone height. The Kaplan-Meier survival analysis was used to calculate the survival rate of bone grafts and implants according to the classifications adopted in this retrospective study.

Results

The success rate of grafts and implants was 98.3% and 97.2%, respectively. There was no statistically significant difference in the success rate among the different bone substitutes (p = 0.140). Only 8 grafts (1.7%) and 21 implants (2.8%) failed. There was a greater success rate for both grafts (96.5%) and implants (97.4%) when the bone height was ≥4 mm. The success rate in the 49 sinuses in which the membrane was perforated was 97.96% for the grafts and 96.2% for the implants. The follow-up periods after rehabilitation ranged from 3 months to 13 years.

Conclusions

Within the limitations of the data analyzed in this retrospective study, maxillary sinus lift was a viable surgical technique that enabled implant placement with a predictable long-term success rate, regardless of the type of material used. The presence of membrane perforation did not interfere with the success rate obtained for grafts and implants.

Association between smoking and Schneiderian membrane perforation during maxillary sinus floor augmentation: A systematic review and meta-analysis

OBJECTIVE

To estimate the association between smoking and Schneiderian membrane perforation in sinus floor augmentation.

MATERIALS AND METHODS

Searches were conducted in PubMed, Web of Science, Embase, and Cochrane Library. Data were extracted by two authors independently. The inclusion criteria were the (1) age of patients >18, (2) the number of participants >10, and (3) smoking and the patients of Schneiderian membrane perforation were accurately recorded. The risk of bias was assessed by the Newcastle-Ottawa scale (NOS). Statistics analyses were conducted using Reman5.4.1 and Stata (15.0). The association of Schneiderian membrane perforation with smoking habits during maxillary sinus floor elevation was expressed as odds ratios (ORs) with a 95% confidence interval (95% CIs). And the I2 statistic was used to estimate statistical heterogeneity. The funnel plot and Egger's tests were used to evaluate the reliability and stability of the results.

RESULTS

Of 1463 articles screened, nine studies were included in our systematic review, and eight were synthesized for meta-analysis. Eight were retrospective observational studies and one was a clinical trial, with a total of 1424 patients included. The nine studies were proved as high quality according to the NOS. There was no significant publication bias in the studies (p = 0.827). A random-effects model was used because of differences in the adopted methodologies (p = 0.39, I2  = 5%). During maxillary sinus augmentation, smoking and Schneiderian membrane perforation were associated (odds ratios, 1.58 [95% CI, 1.10-2.25]).

CONCLUSION

Smoking increased the risk of membrane perforation in maxillary sinus floor augmentation. Our evaluation was limited by the poor reporting of the number of cigarettes smoked per day (PROSPERO number was CRD42022306570).

Radiographic results of osteotome-driven maxillary sinus floor elevation without grafting materials after 17.5 years radiographic evaluation of minimally-invasive sinus grafting

BACKGROUND

There is growing evidence that minimally invasive sinus augmentation works without the use of filler materials. This study assessed the bone integration and sinus projection of single-unit implants in the maxilla, which were placed approximately 18 years ago using a modified filler-free osteotome technique.

METHODS

Sixteen of the 24 treated patients of a former publication (treatment was performed between 2001 and 2004) were reassessed after a mean implant loading period of 17.5 years. The treated posterior areas were evaluated using cone-beam computed tomography (CBCT), and as a primary outcome parameter, sinus projection was determined in sectional views at the mesial, distal, buccal, and oral sites. Additionally, the percentage of alveolar bone contact was determined with respect to the implant length. Conventional radiographs were used to determine marginal bone levels. Additionally, plaque, bleeding on probing, and probing pocket depth were measured. The reconstructions were checked for chipping and other technical complications such as loss of retention, screw loosening, and screw fracture.

RESULTS

The mean age of the included patients was 72.8 ± 8.5 years. Two implants were lost. Therefore, fourteen implants were available for CBCT evaluation. The highest sinus projection of 2.1 ± 1.7 mm was observed in the distal aspect, while it was 1.1 ± 1.5, 0.9 ± 1.2, and 0.9 ± 1.1 mm at the mesial, buccal, and oral sites, respectively. The maximal sinus projection in one case was 6.7 mm. The percentage calculation of osseous implant integration (in mm ± standard deviations) with respect to the selected implant length at the mesial, distal, buccal, and oral sites showed values ranging from, 87.9 ± 16.0, 78.4 ± 20.3, 91.0 ± 12.5, and 90.5 ± 11.1%, respectively. Five implants displayed probing pocket depths of more than 4 mm with bleeding; all implants had less than 1 mm of bone loss in the observation period, that is, implants had mucositis. Six of 14 crowns showed small chippings within the ceramic veneering. One case of screw loosening was reported in medical history.

DISCUSSION

This study showed that implant placement in non-augmented sinuses resulted in good clinical results. The sinus projection, even if persistent and present, leads to no functional impairments. Given adequate maintenance, marginal bone levels remain constant and peri‑implant health can be observed. Moreover, these results represent only a small cohort; and therefore, should be interpreted with caution. However, in view of the existing literature, these highly promising results are in line with other findings.

CLINICAL SIGNIFICANCE

To the best of our knowledge, this dataset is the report with the longest follow-up. Overall, implants placed in the sinus without fillers represent a valuable alternative for tooth replacement in a minimally interventional manner.

Short versus standard implants at sinus augmented sites: a systematic review and meta-analysis

BACKGROUND

Short implants are proposed as a less invasive alternative with fewer complications than standard implants in combination with sinus lift. The aim of this systematic review and meta-analysis was to state the efficacy of placing short implants (≤ 6 mm) compared to standard-length implants (≥ 8 mm) performing sinus lift techniques in patients with edentulous posterior atrophic jaws. Efficacy will be evaluated through analyzing implant survival (IS) and maintenance of peri-implant bone (MBL).

METHODS

Screening process was done using the National Library of Medicine (MEDLINE by PubMed), EMBASE, the Cochrane Oral Health, and Web of Science (WOS). The articles included were randomized controlled trials. Risk of bias was evaluated according to The Cochrane Collaboration's tool. Weighted means were calculated. Heterogeneity was determined using Higgins (I²). A random-effects model was applied. Secondary outcomes such as surgical time, patient satisfaction, mucositis and peri-implantitis, pain, and swelling were analyzed.

RESULTS

Fourteen studies (597 patients and 901 implants) were evaluated. IS was 1.02 risk ratio, ranging from 1.00 to 1.05 (CI 95%) (p = 0.09), suggesting that IS was similar when both techniques were used. MBL was higher in patients with standard-length implants plus sinus lift elevation (p = 0.03). MBL was 0.11 (0.01-0.20) mm (p = 0.03) and 0.23 (0.07-0.39) mm (p = 0.005) before and after 1 year of follow-up, respectively, indicating that the marginal bone loss is greater for standard-length implants.

DISCUSSION

Within the limitations of the present study, as relatively small sample size, short dental implants can be used as an alternative to standard-length implants plus sinus elevation in cases of atrophic posterior maxilla. Higher MBL was observed in the groups where standard-length implants were used, but implant survival was similar in both groups. Moreover, with short implants, it was observed a reduced postoperative discomfort, minimal invasiveness, shorter treatment time, and reduced costs.

CLINICAL CLINICAL RELEVANCE

The low MBL promoted by short implants does contribute to a paradigm shift from sinus grafting with long implants to short implants. Further high-quality long-term studies are required to confirm these findings.

Tilted Implants and Sinus Floor Elevation Techniques Compared in Posterior Edentulous Maxilla: A Retrospective Clinical Study over Four Years of Follow-Up

The aim of this study was to evaluate the implant survival rate, marginal bone loss, and surgical and prosthetic complications of implants placed through sinus floor elevation and tilted implants engaged in basal bone to bypass the maxillary sinus. Sixty patients were enrolled for this study. According to the residual bone height of the posterior maxilla, the sample was divided into three groups of 20 patients: Group A (lateral sinus floor elevation), Group B (transcrestal sinus floor elevation), and Group C (tilted implants employed to bypass the sinus floor). Follow-up visits were performed one week after surgery, at three and six months, and then once a year for the next 4 years. The outcomes were the implant survival rate, marginal bone loss, and surgical and prosthetic complications. Although Groups A, B, and C demonstrated implant survival rates of 83.3%, 86.7%, and 98.3%, respectively, the statistical analysis showed no statistically significant difference between groups. Statistically significant differences between groups were also not found concerning marginal bone loss, as recorded by intra-oral X-ray measurements during follow-up examinations. Regarding complications, it was not possible to perform a statistical analysis. To reduce possible surgical risks, implant placement in basal bone could be preferred.

Comparative analysis of lateral maxillary sinus augmentation with a xenogeneic bone substitute material in combination with piezosurgical preparation and bony wall repositioning or rotary instrumentation and membrane coverage: a prospective randomized clinical and histological study

OBJECTIVES

The present randomized controlled clinical study aimed to investigate if, in lateral maxillary sinus augmentation, the repositioned bony wall or the application of a collagen membrane results in more preferable new hard tissue formation.

MATERIALS AND METHODS

Forty patients were divided into two study groups. Both groups received a xenogeneic bone substitute material (BSM) during lateral sinus augmentation. In the bony wall group (BW), following piezosurgery, the retrieved bony wall was repositioned. In the collagen membrane group (CM), following rotary instrument preparation, collagen membrane coverage was applied. After 6 months, biopsies were taken to histologically analyze the percentage of BSM, connective tissue (CT), and newly formed bone (NFB) following both approaches.

RESULTS

Forty implants were placed and 29 harvested biopsies could be evaluated. Duration of surgery, membrane perforations, and VAS were detected. Histomorphometrical analysis revealed comparable amounts of all analyzed parameters in both groups in descending order: CT (BW: 39.2 ± 9%, CM: 37,9 ± 8.5%) > BSM (BW: 32.9 ± 6.3%, CM: 31.8 ± 8.8%) > NB (BW: 27.8 ± 11.2%, CM: 30.3 ± 4.5%).

CONCLUSIONS

The results of the present study show that the closure of the access window by means of the retrieved bony wall or a native collagen membrane led to comparable bone augmentation results.

CLINICAL TRIAL

clinicaltrials.gov NCT04811768.

CLINICAL RELEVANCE

Lateral maxillary sinus augmentation with the application of a xenogeneic BSM in combination with a native collagen membrane for bony window coverage represents a reliable method for surgical reconstruction of the posterior maxilla. Piezosurgery with bony window repositioning delivers comparable outcomes without membrane coverage.

Histomorphometric evaluation of different graft associations for maxillary sinus elevation in wide antral cavities: a randomized controlled clinical trial

OBJECTIVES

Pneumatization of the maxillary sinus can make it difficult, if not impossible, to install osseointegrated implants, and undertake their eventual functional rehabilitation, which may ultimately require regenerative techniques to achieve. This randomized controlled study proposed conducting a histological evaluation of the behavior of different graft materials in wide maxillary sinuses, at a height of 8 to 10 mm from the alveolar ridge, combined with bone remnants less than 3mm.

MATERIALS AND METHODS

Thirty-six patients underwent a sinus elevation procedure through the lateral window. The sinuses were randomly filled with the following materials (n=12/group): group 1, xenogenic bone + autogenous bone (ratio 70:30, respectively); group 2, xenogenic bone + L-PRF; and group 3, xenogenic bone. At 8 months, bone biopsies of engrafted sites were harvested and analyzed histomorphometrically in order to quantify newly formed bone tissue.

RESULTS

The results showed a greater area of newly formed bone for G1, averaging 2678.37 (1116.40) μm², compared with G2 at 984.87 (784.27) μm², and G3 at 480.66 (384.76) μm² (p < 0.05). Additionally, fewer xenogenic bone particles and a large amount of connective tissue were observed in G2.

CONCLUSIONS

In maxillary sinuses with large antral cavities, autogenous bone combined with xenogenic bone seems to demonstrate better graft remodeling and improve bone formation, compared with the addition of L-PRF.

CLINICAL RELEVANCE

L-PRF produces few advantages regarding new bone formation in the wide maxillary sinuses.

TRIAL REGISTRATION

Brazilian Clinical Trials Registry (REBEC) number RBR-2pbbrvg.

It is all about peri-implant tissue health

Healthy peri-implant tissues have become synonymous with implant success and a major challenge in contemporary implant dentistry. Numerous local and systemic factors, as well as iatrogenic and other hitherto underappreciated factors of potential clinical relevance may influence the outcome of implant therapy. In this volume of Periodontology 2000, a group of outstanding experts has elaborated on the latest insights on the prevention and management of major surgical, biological and technical complications, to facilitate the establishment and maintenance of peri-implant health. This volume focusses on factors affecting early and late implant loss and the potential role of systemic diseases and local conditions. It comprehensively discusses the implementation of guided implant surgery to facilitate the cleansibility of implant-supported restorations, as well as iatrogenic factors related to bone augmentation/sinus grafting procedures. The challenges associated with soft-tissue grafting and the prevention of esthetic complications are also reviewed as the paradigm of success in implant dentistry shifts from implant survival towards a greater focus on patient-reported outcomes. Prosthetic failures remain a significant challenge and are discussed in light of new evidence, as is the relevance of the structural dimensions of the peri-implant mucosa. The volume closes with detailed and well-illustrated appraisals of the surgical management of peri-implantitis, the management and sequelae of dental implant removal, and the latest evidence for the oral health related quality of life in patients treated with dental implants.