In vitroquality of apheresis platelets divided into paediatric-sized units and stored in PVC bags plasticised with TOTM, BTHC or DINCH

An evaluation of diethylhexyl phthalate free top & bottom in-line blood collection set with a new soft housing filter

BACKGROUND AND OBJECTIVES

Di (2-ethylhexyl) phthalate (DEHP) plasticizer must be removed from polyvinylchloride (PVC) medical devices due to toxicity. DEHP/PVC blood bags were shown to provide stable quality under blood component production and to create good storage conditions for red blood cells concentrate (RBC). It is important that substitution of the DEHP maintains the RBC quality during storage, which should be achieved with Di (isononyl) cyclohexane-1,2-dicarboxylate (DINCH), although substitution of the plasticizer has been challenging.

MATERIALS AND METHODS

A DEHP-free Top & Bottom in-line RBC set was validated in a tertiary hospital blood bank facility. Volunteer blood donors were randomly allocated for blood collection into DINCH/PVC or DEHP/PVC set. The groups were additionally divided according to additive solution/filter combination: PAGGS-M + DINCH/PVC filter (only with DINCH/PVC set), and SAG-M + DINCH/PVC filter and SAG-M + DEHP/PVC filter (only with DEHP/PVC set). Processing and storage effects were assessed in all components.

RESULTS

RBC concentrates, platelet concentrates and plasma that was processed and stored in DEHP-free set fulfilled European requirements for quality. The cells stored in PAGGS-M after filtration through DEHP-free PVC filter showed the same low haemolysis compared with conventional set at 49 days of storage. Platelets stored in DINCH/PVC bag provided a sufficient quality of platelets after 7 days of storage. Plasma maintained the coagulation factors during 12 months of storage.

CONCLUSION

A new DINCH/PVC set allows production of blood components of satisfactory quality in DEHP-free environment.

Medical devices as a source of phthalate exposure: a review of current knowledge and alternative solutions

Phthalates are a group of phthalic acid esters used as plasticisers in a large number of products to improve their flexibility, softness, and extensibility. Their wide use in medical devices, however, raises a lot of concern, as they can enter the organism and have toxic effects on human liver, thyroid, kidneys, lungs, reproductive, endocrine, nervous, and respiratory system and are associated with asthma, obesity, autism, and diabetes. The aim of this review is to summarise current knowledge about phthalate migration from medical devices during different medical procedures and possible impact on patient health. It also looks at alternative plasticisers with supposedly lower migration rates and safer profile. Not enough is known about which and how many phthalates make part of medical devices or about the health impacts of alternative plasticisers or their migration rates.

Targeting biophysical cues to address platelet storage lesions

Platelets play vital roles in vascular repair, especially in primary hemostasis, and have been widely used in transfusion to prevent bleeding or manage active bleeding. Recently, platelets have been used in tissue repair (e.g., bone, skin, and dental alveolar tissue) and cell engineering as drug delivery carriers. However, the biomedical applications of platelets have been associated with platelet storage lesions (PSLs), resulting in poor clinical outcomes with reduced recovery, survival, and hemostatic function after transfusion. Accumulating evidence has shown that biophysical cues play important roles in platelet lesions, such as granule secretion caused by shear stress, adhesion affected by substrate stiffness, and apoptosis caused by low temperature. This review summarizes four major biophysical cues (i.e., shear stress, substrate stiffness, hydrostatic pressure, and thermal microenvironment) involved in the platelet preparation and storage processes, and discusses how they may synergistically induce PSLs such as platelet shape change, activation, apoptosis and clearance. We also review emerging methods for studying these biophysical cues in vitro and existing strategies targeting biophysical cues for mitigating PSLs. We conclude with a perspective on the future direction of biophysics-based strategies for inhibiting PSLs. STATEMENT OF SIGNIFICANCE: Platelet storage lesions (PSLs) involve a series of structural and functional changes. It has long been accepted that PSLs are initiated by biochemical cues. Our manuscript is the first to propose four major biophysical cues (shear stress, substrate stiffness, hydrostatic pressure, and thermal microenvironment) that platelets experience in each operation step during platelet preparation and storage processes in vitro, which may synergistically contribute to PSLs. We first clarify these biophysical cues and how they induce PSLs. Strategies targeting each biophysical cue to improve PSLs are also summarized. Our review is designed to draw the attention from a broad range of audience, including clinical doctors, biologists, physical scientists, engineers and materials scientists, and immunologist, who study on platelets physiology and pathology.

An update on the hazard of and exposure to diethyl hexyl phthalate (DEHP) alternatives used in medical devices

The use of the plasticizer diethyl hexyl phthalate (DEHP) in PVC medical devices is being questioned due to its potential reprotoxic effects in patients exposed as a result from migration from the device. This article reviews new information on migration and toxicity data of eleven alternative plasticizers that have previously been evaluated by the Danish EPA and the EU SCENIHR (Scientific Committee on Emerging and Newly Identified Health Risks). The new toxicity data did not justify the reconsideration of the critical NOAELs as established by SCENIHR and Danish EPA. The dataset on oral toxicity studies is rather complete for most substances; however, in particular for reproductive toxicity and endocrine disruption, data gaps still exist for many alternatives. Toxicity data on intravenous exposure are lacking and these are essential to conclude on hazard characteristics of alternatives that are poorly absorbed via the oral exposure route. Migration data are emerging for a few alternatives but still sparse for the majority of the alternatives. Taking all data on migration and toxicity in consideration, 1,2-cyclohexanedicarboxylic acid, diisononylester (DINCH), and tris(2-ethylhexyl)benzene-1,2,4-tricarboxylate display a more favorable profile compared to DEHP. For these promising alternatives, a risk assessment for use in medical devices should be conducted. As a next step, we recommend the (further) generation of relevant migration data and, where needed, relevant toxicity data for the alternative substances, in order to be able to conduct a benefit-risk analysis of DEHP and the alternatives as obligatory in the new European Union Medical Device Regulation.

Simultaneous determination of di(2-ethylhexyl) phthalate and diisononylcyclohexane-1,2-dicarboxylate and their monoester metabolites in four labile blood products by liquid chromatography tandem mass spectrometry

Di(2-ethylhexyl) phthalate (DEHP) is a common plasticizer that is largely used for PVC blood bags. The migration of DEHP from medical devices into labile blood products (LBP) is a well-known situation. While DEHP has beneficial effects on the storage of red blood cells, it can have toxicological impact due to its potential reprotoxic effects (classified group 1B). Since July 1st, 2015, the French law prohibits the use of tubing made in DEHP-plasticized PVC in paediatric, neonatal and maternity wards. This provision, which could extend in several years more widely to medical devices used for drugs infusion, dialysis, feeding and blood bags, has led manufacturers to replace DEHP to alternative plasticizers such as diisononylcyclohexane-1,2-dicarboxylate (DINCH). In this paper, a liquid chromatography-tandem mass spectrometry (LCMS/MS) method has been developed and validated for the determination of DEHP, DINCH and their corresponding monoester metabolites (MEHP and MINCH) in four labile blood products (LBP): whole blood (WB), red cells concentrate (RCC), plasma and platelet concentrate (PC). Due to strong contamination of blank LBP by DEHP because of its ubiquitous presence in working environment and despite the attention paid to avoid contamination of solvents and glassware, a trap chromatographic column was implemented between the solvent mixing chamber and the injector of the LC system. This set-up permitted to discriminate DEHP present in the sample to DEHP brought by the environmental contamination. In the optimized conditions, all compounds were separated in less than 10 min. The analytes were extracted from LBP samples using a liquid-liquid extraction. After optimization, recoveries were ranged from 47 to 96 %, depending on the analytes and the nature of LBP. Except for DEHP which exhibited RSD values of intermediate precision higher than 20 % at a concentration of 25 nM, all the precision results (repeatability and intermediate precision) were lower than 16 % and trueness values ranged from -16.2-19.8%. Using the validated method, the leachability of DEHP and DINCH from corresponding PVC-blood bags was investigated and the concentrations of their corresponding metabolites, MEHP and MINCH, were determined in whole blood, red cells concentrate, plasma and platelet concentrate.