LCM-seq reveals the crucial role of LsSOC1 in heat-promoted bolting of lettuce (Lactuca sativa L.)

LsFUL-LsSMU2 module positively controls bolting time in leaf lettuce (Lactuca sativa L.) under high temperature

High temperature (HT) is an environmental factor that considerably affects plant physiology, development, crop yield, and economic value. HT can cause diseases and early bolting of leaf lettuce, thereby reducing the yield and quality of leaf lettuce. Herein, we used two leaf lettuce (Lactuca sativa L.) cultivars (bolting-resistant 'S24' and bolting-sensitive 'S39') to investigate the key factors and molecular mechanism impacting bolting. We found that 14 MADS-box genes implicated in bolting and flowering, LsMADS54 (also referred to as L. sativa FRUITFULL, LsFUL), was significantly up-regulated 1000 times after 5-d HT treatment and that HT-induced up-regulation of LsFUL was higher in bolting-sensitive than in resistant cultivars. The overexpression lines of LsFUL exhibited an earlier bolting time than that in the non-transformed 'S39'(CK). However, the RNA interference, and CRISPR-Cas9-mediated knockout lines of LsFUL exhibited a later bolting time than that in CK. In addition, we found that L. sativa SUPPRESSORS OF MEC-8 AND UNC-52 PROTEIN 2 (LsSMU2) and L. sativa CONSTANS-LIKE PROTEIN 5 (LsCOL5) interact with LsFUL, and these interactions could stimulate or prevent bolting. We observed that elevated temperature stimulated the abundance of LsSMU2 in the stem, which collaborated with LsFUL to accelerate bolting. Conversely, room temperature (RT) condition led to relatively more stable LsCOL5, which worked with LsFUL to postpone bolting. In summary, our findings demonstrate a molecular regulatory module of LsSMU2-LsFUL associated with HT-induced premature bolting, which serves as a reference for understanding HT-induced premature bolting phenomenon in leaf lettuce.

Developing a simple and rapid method for cell-specific transcriptome analysis through laser microdissection: insights from citrus rind with broader implications

BACKGROUND

With the rapid development of single-cell sequencing technology, histological studies are no longer limited to conventional homogenized tissues. Laser microdissection enables the accurate isolation of specific tissues or cells, and when combined with next-generation sequencing, it can reveal important biological processes at the cellular level. However, traditional laser microdissection techniques have often been complicated and time-consuming, and the quality of the RNA extracted from the collected samples has been inconsistent, limiting follow-up studies. Therefore, an improved, simple, and efficient laser microdissection method is urgently needed.

RESULTS

We omitted the sample fixation and cryoprotectant addition steps. Instead, fresh samples were embedded in Optimal Cutting Temperature medium within 1.5 ml centrifuge tube caps, rapidly frozen with liquid nitrogen, and immediately subjected to cryosectioning. A series of section thicknesses of citrus rind were tested for RNA extraction, which showed that 18 μm thickness yielded the highest quality RNA. By shortening the dehydration time to one minute per ethanol gradient and omitting the tissue clearing step, the resulting efficient dehydration and preserved morphology ensured high-quality RNA extraction. We also propose a set of laser microdissection parameters by adjusting the laser power to optimal values, reducing the aperture size, and lowering the pulse frequency. Both the epidermal and subepidermal cells from the citrus rind were collected, and RNA extraction was completed within nine hours. Using this efficient method, the transcriptome sequencing of the isolated tissues generated high-quality data with average Q30 values and mapping rates exceeding 91%. Moreover, the transcriptome analysis revealed significant differences between the cell layers, further confirming the effectiveness of our isolation approach.

CONCLUSIONS

We developed a simple and rapid laser microdissection method and demonstrated its effectiveness through a study based on citrus rind, from which we generated high-quality transcriptomic data. This fast and efficient method of cell isolation, combined with transcriptome sequencing not only contributes to precise histological studies at the cellular level in citrus but also provides a promising approach for cell-specific transcriptome analysis in a broader range of other plant tissues.

Advance in the Thermoinhibition of Lettuce (Lactuca sativa L.) Seed Germination

Thermoinhibition refers to the inability of seeds to germinate when inhibited by high temperatures, but when environmental conditions return to normal, the seeds are able to germinate rapidly again, which is different from thermodormancy. Meanwhile, with global warming, the effect of the thermoinhibition phenomenon on the yield and quality of crops in agricultural production is becoming common. Lettuce, as a horticultural crop sensitive to high temperature, is particularly susceptible to the effects of thermoinhibition, resulting in yield reduction. Therefore, it is crucial to elucidate the intrinsic mechanism of action of thermoinhibition in lettuce seeds. This review mainly outlines several factors affecting thermoinhibition of lettuce seed germination, including endosperm hardening, alteration of endogenous or exogenous phytohormone concentrations, action of photosensitizing pigments, production and inhibition of metabolites, maternal effects, genetic expression, and other physical and chemical factors. Finally, we also discuss the challenges and potential of lettuce seed germination thermoinhibition research. The purpose of this study is to provide theoretical support for future research on lettuce seed germination thermoinhibition, and with the aim of revealing the mechanisms and effects behind lettuce seed thermoinhibition. This will enable the identification of more methods to alleviate seed thermoinhibition or the development of superior heat-tolerant lettuce seeds.

Stability Evaluation for Heat Tolerance in Lettuce: Implications and Recommendations

Lettuce is an important cool-temperature crop, and its principal abiotic stress is low heat tolerance. Lettuce production has become more challenging in the context of global warming changes. Hence, the main objective of this research was to investigate the relationship between stability and lettuce heat tolerance. Field and greenhouse trials were run in 2015 (summer) and 2016 (fall and spring). The environments were composed of a combination of season and place (field, glass, and plastic greenhouse), and the assessed genotypes were BRS Leila and Mediterrânea, Elisa, Everglades, Simpson, and Vanda. Statistical analysis showed a significant effect (p < 0.05) of environments (E), genotypes (G), and the GEI. BRS Leila, Elisa, and BRS Mediterrânea showed the greatest means to the first anthesis in suitable environments (milder temperatures). Among these cultivars, BRS Mediterrânea was the most stable and adapted to hot environments. The environmental conditions studied in this research, mainly high temperatures, could become a reality in many lettuce-producing areas. Therefore, the results can help indicate and develop lettuce varieties with greater heat tolerance.

Laser capture microdissection for biomedical research: towards high-throughput, multi-omics, and single-cell resolution

Spatial omics technologies have become powerful methods to provide valuable insights into cells and tissues within a complex context, significantly enhancing our understanding of the intricate and multifaceted biological system. With an increasing focus on spatial heterogeneity, there is a growing need for unbiased, spatially resolved omics technologies. Laser capture microdissection (LCM) is a cutting-edge method for acquiring spatial information that can quickly collect regions of interest (ROIs) from heterogeneous tissues, with resolutions ranging from single cells to cell populations. Thus, LCM has been widely used for studying the cellular and molecular mechanisms of diseases. This review focuses on the differences among four types of commonly used LCM technologies and their applications in omics and disease research. Key attributes of application cases are also highlighted, such as throughput and spatial resolution. In addition, we comprehensively discuss the existing challenges and the great potential of LCM in biomedical research, disease diagnosis, and targeted therapy from the perspective of high-throughput, multi-omics, and single-cell resolution.

GA signaling protein LsRGL1 interacts with the abscisic acid signaling-related gene LsWRKY70 to affect the bolting of leaf lettuce

A variety of endogenous hormone signals, developmental cues, and environmental stressors can trigger and promote leaf lettuce bolting. One such factor is gibberellin (GA), which has been linked to bolting. However, the signaling pathways and the mechanisms that regulate the process have not been discussed in full detail. To clarify the potential role of GAs in leaf lettuce, significant enrichment of GA pathway genes was found by RNA-seq, among which the LsRGL1 gene was considered significant. Upon overexpression of LsRGL1, a noticeable inhibition of leaf lettuce bolting was observed, whereas its knockdown by RNA interference led to an increase in bolting. In situ hybridization analysis indicated a significant accumulation of LsRGL1 in the stem tip cells of overexpressing plants. Leaf lettuce plants stably expressing LsRGL1 were examined concerning differentially expressed genes through RNA-seq analysis, and the data indicated enhanced enrichment of these genes in the 'plant hormone signal transduction' and 'phenylpropanoid biosynthesis' pathways. Additionally, significant changes in LsWRKY70 gene expression were identified in COG (Clusters of Orthologous Groups) functional classification. The results of yeast one-hybrid, β-glucuronidase (GUS), and biolayer interferometry (BLI) experiments showed that LsRGL1 proteins directly bind to the LsWRKY70 promoter. Silencing LsWRKY70 by virus-induced gene silencing (VIGS) can delay bolting, regulate the expression of endogenous hormones, abscisic acid (ABA)-linked genes, and flowering genes, and improve the nutritional quality of leaf lettuce. These results strongly associate the positive regulation of bolting with LsWRKY70 by identifying its vital functions in the GA-mediated signaling pathway. The data obtained in this research are invaluable for further experiments concerning the development and growth of leaf lettuce.

Genome-wide identification and characterization of the lettuce GASA family in response to abiotic stresses

BACKGROUND

Lettuce is one of the most extensively farmed vegetables in the world, and it prefers cool growing conditions. High temperatures promote premature bolt formation, reducing quality and yield. The gibberellic acid-stimulated Arabidopsis (GASA) family genes play critical roles in plant growth, development, and stress responses. However, the biological functions of GASA proteins in lettuce have yet to be thoroughly investigated.

RESULTS

Using genome-wide analysis, 20 GASAs were identified in lettuce including, three groups of LsGASA proteins based on the phylogenetic analysis. Except for one, all GASA proteins included a conserved GASA domain with 12 cysteine residues. Cis-element analysis showed that LsGASAs were closely associated with light, phytohormones, and stress resistance. Five segmental and three tandem duplication events were observed in the LsGASA family based on duplication analysis. GASA synteny analysis among lettuce, Arabidopsis, tobacco, and rice revealed that LsGASA5 is highly collinear with all species. Six of the 20 LsGASA showed increased expression patterns at specific time points in the shoot apical meristem when subjected to heat stress. According to gene expression analysis, the majority of GASA were highly expressed in flowers compared to other organs, and six GASA exhibited highly increased expression levels in response to NaCl, abscisic acid, and gibberellin treatment. Furthermore, LsGASA proteins are predominantly found in the plasma membrane and/or the cytosol.

CONCLUSIONS

This study provides a comprehensive characterization of LsGASA genes for their diversity and biological functions. Moreover, our results will be useful for further studies on the function of lettuce GASA in abiotic stress- and heat-induced bolting signaling.

Genome-Wide Analysis of Auxin Response Factors in Lettuce (Lactuca sativa L.) Reveals the Positive Roles of LsARF8a in Thermally Induced Bolting

Warm temperatures induce plant bolting accompanied by flower initiation, where endogenous auxin is dynamically associated with accelerated growth. Auxin signaling is primarily regulated by a family of plant-specific transcription factors, AUXIN RESPONSE FACTORS (ARFs), which either activate or repress the expression of downstream genes in response to developmental and environmental cues. However, the relationship between ARFs and bolting has not been completely understood in lettuce yet. Here, we identified 24 LsARFs (Lactuca sativa ARFs) in the lettuce genome. The phylogenetic tree indicated that LsARFs could be classified into three clusters, which was well supported by the analysis of exon-intron structure, consensus motifs, and domain compositions. RNA-Seq analysis revealed that more than half of the LsARFs were ubiquitously expressed in all tissues examined, whereas a small number of LsARFs responded to UV or cadmium stresses. qRT-PCR analysis indicated that the expression of most LsARFs could be activated by more than one phytohormone, underling their key roles as integrative hubs of different phytohormone signaling pathways. Importantly, the majority of LsARFs displayed altered expression profiles under warm temperatures, implying that their functions were tightly associated with thermally accelerated bolting in lettuce. Importantly, we demonstrated that silencing of LsARF8a, expression of which was significantly increased by elevated temperatures, resulted in delayed bolting under warm temperatures, suggesting that LsARF8a might conduce to the thermally induced bolting. Together, our results provide molecular insights into the LsARF gene family in lettuce, which will facilitate the genetic improvement of the lettuce in an era of global warming.

LsARF3 mediates thermally induced bolting through promoting the expression of LsCO in lettuce (Lactuca sativa L.)

Lettuce (Lactuca sativa L.) is a leafy vegetable whose edible organs usually are leaf or stems, and thus high-temperature induced bolting followed by flower initiation is an undesirable trait in lettuce production. However, the molecular mechanism that controls lettuce bolting and flowering upon thermal treatments is largely unknown. Here, we identified a Lettuce auxin response factor 3 (LsARF3), the expression of which was enhanced by heat and auxin treatments. Interestingly, LsARF3 is preferentially expressed in stem apex, suggesting it might be associated with lettuce bolting. Transgenic lettuce overexpressing LsARF3 displayed early bolting and flowering, whereas knockout of LsARF3 dramatically delayed bolting and flowering in lettuce under normal or high temperature conditions. Furthermore, Exogenous application of IAA failed to rescue the late-bolting and -flowering phenotype of lsarf3 mutants. Several floral integrator genes including LsCO, LsFT, and LsLFY were co-expressed with LsARF3 in the overexpression and knockout lettuce plants. Yeast one-hybrid (Y1H) experiments suggested that LsARF3 could physically interact with the LsCO promoter, which was further confirmed by a dual luciferase assay in tobacco leaves. The results indicated that LsARF3 might directly modulate the expression of LsCO in lettuce. Therefore, these results demonstrate that LsARF3 could promote lettuce bolting in response to the high temperature by directly or indirectly activating the expression of floral genes such as LsCO, which provides new insights into lettuce bolting in the context of ARFs signaling and heat response.

Molecular basis of high temperature-induced bolting in lettuce revealed by multi-omics analysis

BACKGROUND

High temperature induces early bolting in lettuce (Lactuca sativa L.), which affects both quality and production. However, the molecular mechanism underlying high temperature-induced bolting is still limited.

RESULTS

We performed systematical analysis of morphology, transcriptome, miRNAs and methylome in lettuce under high temperature treatment. Through a comparison of RNA-Seq data between the control and the high temperature treated lettuces at different time points totally identified 2944 up-regulated genes and 2203 down-regulated genes, which cover three floral pathways including photoperiod, age and gibberellin (GA) pathways. Genome wide analysis of miRNAs and methylome during high temperature treatment indicated miRNAs and DNA methylation might play a role controlling gene expression during high temperature-induced bolting. miRNA targets included some protein kinase family proteins, which potentially play crucial roles in this process.

CONCLUSIONS

Together, our results propose a possible regulation network involved in high temperature-induced bolting.

MdNup62 interactions with MdHSFs involved in flowering and heat-stress tolerance in apple

Because of global warming, the apple flowering period is occurring significantly earlier, increasing the probability and degree of freezing injury. Moreover, extreme hot weather has also seriously affected the development of apple industry. Nuclear pore complexes (NPCs) are main channels controlling nucleocytoplasmic transport, but their roles in regulating plant development and stress responses are still unknown. Here, we analysed the components of the apple NPC and found that MdNup62 interacts with MdNup54, forming the central NPC channel. MdNup62 was localized to the nuclear pore, and its expression was significantly up-regulated in 'Nagafu No. 2' tissue-cultured seedlings subjected to heat treatments. To determine MdNup62's function, we obtained MdNup62-overexpressed (OE) Arabidopsis and tomato lines that showed significantly reduced high-temperature resistance. Additionally, OE-MdNup62 Arabidopsis lines showed significantly earlier flowering compared with wild-type. Furthermore, we identified 62 putative MdNup62-interacting proteins and confirmed MdNup62 interactions with multiple MdHSFs. The OE-MdHSFA1d and OE-MdHSFA9b Arabidopsis lines also showed significantly earlier flowering phenotypes than wild-type, but had enhanced high-temperature resistance levels. Thus, MdNUP62 interacts with multiple MdHSFs during nucleocytoplasmic transport to regulate flowering and heat resistance in apple. The data provide a new theoretical reference for managing the impact of global warming on the apple industry.

Development of late-bolting plants by CRISPR/Cas9-mediated genome editing from mesophyll protoplasts of lettuce

KEY MESSAGE

CRISPR/Cas9-mediated introduction of a single base mutation in SOC1, a transcription factor that regulates flowering time, results in late-bolting phenotypes in lettuce. Lettuce is a widely consumed leafy vegetable crop. One of the molecular approaches that can increase leaf yield of lettuce is to delay the onset of flowering. Flowering time or time-to-bolting is not only a valuable trait for lettuce, but also a sought-after phenotype for other leafy vegetable crops. This is because delayed flowering enables more extensive vegetative growth, which leads to higher leaf numbers, and possibly larger leaves. Here, we deployed the most recent gene-editing technique to reduce the expression of SOC1, which is a gene that encodes one of several transcription factors that regulate the onset of flowering in plants. By inducing a single base mutation in SOC1 through Cas9 protein-gRNA ribonucleoproteins (RNPs) system, we showed that the time to first flower bud formation in lettuce is longer than that of wild type. In addition, expression of the floral regulatory genes including LsLFY, LsFUL, LsAPL1, and LsAPL2, was lower in the SOC1 gene edited plants than that of the wild type. The gene-editing technique established in this study could be directly applied for diverse quality improvement of lettuce by direct RNP transfer from protoplasts. Furthermore, it is expected that direct RNP transfer from protoplasts can be used as a useful mean for developing various gene edited crops.

LsMYB15 Regulates Bolting in Leaf Lettuce (Lactuca sativa L.) Under High-Temperature Stress

High temperature is one of the primary environmental stress factors affecting the bolting of leaf lettuce. To determine the potential role of melatonin in regulating high-temperature induced bolting in leaf lettuce (Lactuca sativa L.), we conducted melatonin treatment of the bolting-sensitive cultivar "S39." The results showed that 100 μmol L^-1 melatonin treatment significantly promoted growth, and melatonin treatment delayed high-temperature-induced bolting in lettuce. RNA-seq analysis revealed that the differentially expressed genes (DEGs) involved in "plant hormone signal transduction" and "phenylpropanoid biosynthesis" were significantly enriched during high-temperature and melatonin treatment. Quantitative reverse transcription polymerase chain reaction (qRT-PCR) analysis suggested that the expression patterns of abscisic acid (ABA)-related genes positively correlated with stem length during leaf lettuce development. Furthermore, weighted gene co-expression network analysis (WGCNA) demonstrated that MYB15 may play an important role in melatonin-induced resistance to high temperatures. Silencing the LsMYB15 gene in leaf lettuce resulted in early bolting, and exogenous melatonin delayed early bolting in leaf lettuce at high temperatures. Our study provides valuable data for future studies of leaf lettuce quality.

GhSOC1s Evolve to Respond Differently to the Environmental Cues and Promote Flowering in Partially Independent Ways

Gossypium hirsutum is most broadly cultivated in the world due to its broader adaptation to the environment and successful breeding of early maturity varieties. However, how cotton responds to environmental cues to adjust flowering time to achieve reproductive success is largely unknown. SOC1 functions as an essential integrator for the endogenous and exogenous signals to maximize reproduction. Thus we identified six SOC1-like genes in Gossypium that clustered into two groups. GhSOC1-1 contained a large intron and clustered with monocot SOC1s, while GhSOC1-2/3 were close to dicot SOC1s. GhSOC1s expression gradually increased during seedling development suggesting their conserved function in promoting flowering, which was supported by the early flowering phenotype of 35S:GhSOC1-1 Arabidopsis lines and the delayed flowering of cotton silencing lines. Furthermore, GhSOC1-1 responded to short-day and high temperature conditions, while GhSOC1-2 responded to long-day conditions. GhSOC1-3 might function to promote flowering in response to low temperature and cold. Taken together, our results demonstrate that GhSOC1s respond differently to light and temperature and act cooperatively to activate GhLFY expression to promote floral transition and enlighten us in cotton adaptation to environment that is helpful in improvement of cotton maturity.

BcSOC1 Promotes Bolting and Stem Elongation in Flowering Chinese Cabbage

Flowering Chinese cabbage is one of the most economically important stalk vegetables. However, the molecular mechanisms underlying bolting, which is directly related to stalk quality and yield, in this species remain unknown. Previously, we examined five key stem development stages in flowering Chinese cabbage. Here, we identified a gene, BcSOC1 (SUPPRESSOR OF OVEREXPRESSION OF CONSTANS1), in flowering Chinese cabbage using transcriptome analysis, whose expression was positively correlated with bolting. Exogenous gibberellin (GA3) and low-temperature treatments significantly upregulated BcSOC1 and promoted early bolting and flowering. Additionally, BcSOC1 overexpression accelerated early flowering and stem elongation in both Arabidopsis and flowering Chinese cabbage, whereas its knockdown dramatically delayed bolting and flowering and inhibited stem elongation in the latter; the inhibition of stem elongation was more notable than delayed flowering. BcSOC1 overexpression also induced cell expansion by upregulating genes encoding cell wall structural proteins, such as BcEXPA11 (cell wall structural proteins and enzymes) and BcXTH3 (xyloglucan endotransglycosidase/hydrolase), upon exogenous GA3 and low-temperature treatments. Moreover, the length of pith cells was correlated with stem height, and BcSOC1 interacted with BcAGL6 (AGAMOUS-LIKE 6) and BcAGL24 (AGAMOUS-LIKE 24). Thus, BcSOC1 plays a vital role in bolting and stem elongation of flowering Chinese cabbage and may play a novel role in regulating stalk development, apart from the conserved function of Arabidopsis SOC1 in flowering alone.

LsRGL1 controls the bolting and flowering times of lettuce by modulating the gibberellin pathway

Bolting, which is a serious problem during lettuce (Lactuca sativa L.) production, is responsible for substantial annual yield and quality losses. Gibberellin plays a critical role in the regulation of lettuce bolting. Additionally, DELLA proteins negatively regulate the gibberellin signaling pathway. However, it is unclear if DELLA proteins are involved in the regulation of lettuce bolting. Therefore, in this study, we identified four DELLA-encoding genes in lettuce, including LsRGL1, which was highly expressed in the stem and negatively correlated with bolting. Knocking down this gene in lettuce promoted bolting, whereas its overexpression inhibited bolting and the biosynthesis of gibberellin and auxin. A transcriptome analysis revealed that genes involved in gibberellin and auxin biosynthesis and flowering were affected in the LsRGL1-overexpressing lines. The yeast two-hybrid and yeast one-hybrid assay results indicated that LsRGL1 can interact with LsGA3ox and the LsYUC4 promoter region. Considered together, the results of this study suggest LsRGL1 negatively regulates lettuce bolting. Furthermore, its function may depend on modifications to gibberellin and auxin levels mediated at the transcript and protein levels.

Comprehensive Annotation and Functional Exploration of MicroRNAs in Lettuce

MicroRNA (miRNA) is an important endogenous post-transcriptional regulator, while lettuce (Lactuca sativa) is a leafy vegetable of global economic significance. However, there are few studies on miRNAs in lettuce, and research on miRNA regulatory network in lettuce is absent. In this study, through deep sequencing of small RNAs in different tissues, together with a reference genome, 157 high-confidence miRNA loci in lettuce were comprehensively identified, and their expression patterns were determined. Using a combination of computational prediction and high-throughput experimental verification, a set of reliable lettuce miRNA targets were obtained. Furthermore, through RNA-Seq, the expression profiles of these targets and a comprehensive view of the negative regulatory relationship between miRNAs and their targets was acquired based on a correlation analysis. To further understand miRNA functions, a miRNA regulatory network was constructed, with miRNAs at the core and combining transcription factors and miRNA target genes. This regulatory network, mainly composed of feed forward loop motifs, greatly increases understanding of the potential functions of miRNAs, and many unknown potential regulatory links were discovered. Finally, considering its specific expression pattern, Lsa-MIR408 as a hub gene was employed to illustrate the function of the regulatory network, and genetic experiments revealed its ability to increase the fresh weight and achene size of lettuce. In short, this work lays a solid foundation for the study of miRNA functions and regulatory networks in lettuce.

Mapping and identification of genetic loci affecting earliness of bolting and flowering in lettuce

KEY MESSAGE

Photoperiod and temperature conditions elicit different genetic regulation over lettuce bolting and flowering. This study identifies environment-specific QTLs and putative genes and provides information for genetic marker assay. Bolting, defined as stem elongation, marks the plant life cycle transition from vegetative to reproductive stage. Lettuce is grown for its leaf rosettes, and premature bolting may reduce crop quality resulting in economic losses. The transition to reproductive stage is a complex process that involves many genetic and environmental factors. In this study, the effects of photoperiod and ambient temperature on bolting and flowering regulation were studied by utilizing a lettuce mapping population to identify quantitative trait loci (QTL) and by gene expression analyses of genotypes with contrasting phenotypes. A recombinant inbred line (RIL) population, derived from a cross between PI 251246 (early bolting) and cv. Salinas (late bolting), was grown in four combinations of short (8 h) and long (16 h) days and low (20 °C) and high (35 °C) temperature. QTL models revealed both genetic (G) and environmental (E) effects, and GxE interactions. A major QTL for bolting and flowering time was found on chromosome 7 (qFLT7.2), and two candidate genes were identified by fine mapping, homology, and gene expression studies. In short days and high temperature conditions, qFLT7.2 had no effect on plant development, while several small-effect loci on chromosomes 2, 3, 6, 8, and 9 were associated with bolting and flowering. Of these, the QTL on chromosome 2, qBFr2.1, co-located with the Flowering Locus T (LsFT) gene. Polymorphisms between parent genotypes in the promotor region may explain identified gene expression differences and were used to design a genetic marker which may be used to identify the late bolting trait.

Quantitative Trait Loci and Candidate Genes Associated with Photoperiod Sensitivity in Lettuce (Lactuca spp.)

KEY MESSAGE

A population of lettuce that segregated for photoperiod sensitivity was planted under long-day and short-day conditions. Genetic mapping revealed two distinct sets of QTLs controlling daylength-independent and photoperiod-sensitive flowering time. The molecular mechanism of flowering time regulation in lettuce is of interest to both geneticists and breeders because of the extensive impact of this trait on agricultural production. Lettuce is a facultative long-day plant which changes in flowering time in response to photoperiod. Variations exist in both flowering time and the degree of photoperiod sensitivity among accessions of wild (Lactuca serriola) and cultivated (L. sativa) lettuce. An F6 population of 236 recombinant inbred lines (RILs) was previously developed from a cross between a late-flowering, photoperiod-sensitive L. serriola accession and an early-flowering, photoperiod-insensitive L. sativa accession. This population was planted under long-day (LD) and short-day (SD) conditions in a total of four field and screenhouse trials; the developmental phenotype was scored weekly in each trial. Using genotyping-by-sequencing (GBS) data of the RILs, quantitative trait loci (QTL) mapping revealed five flowering time QTLs that together explained more than 20% of the variation in flowering time under LD conditions. Using two independent statistical models to extract the photoperiod sensitivity phenotype from the LD and SD flowering time data, we identified an additional five QTLs that together explained more than 30% of the variation in photoperiod sensitivity in the population. Orthology and sequence analysis of genes within the nine QTLs revealed potential functional equivalents in the lettuce genome to the key regulators of flowering time and photoperiodism, FD and CONSTANS, respectively, in Arabidopsis.

LsAP2 regulates leaf morphology by inhibiting CIN-like TCP transcription factors and repressing LsKAN2 in lettuce

Leaf size and flatness directly affect photosynthesis and are closely related to agricultural yield. The final leaf size and shape are coordinately determined by cell proliferation, differentiation, and expansion during leaf development. Lettuce (Lactuca sativa L.) is one of the most important leafy vegetables worldwide, and lettuce leaves vary in shape and size. However, the molecular mechanisms of leaf development in lettuce are largely unknown. In this study, we showed that the lettuce APETALA2 (LsAP2) gene regulates leaf morphology. LsAP2 encodes a transcriptional repressor that contains the conserved EAR motif, which mediates interactions with the TOPLESS/TOPLESS-RELATED (TPL/TPR) corepressors. Overexpression of LsAP2 led to small and crinkly leaves, and many bulges were seen on the surface of the leaf blade. LsAP2 physically interacted with the CINCINNATA (CIN)-like TEOSINTE BRANCHED1/CYCLOIDEA/PROLIFERATING CELL FACTOR (TCP) transcription factors and inhibited their transcriptional activation activity. RNA sequencing analysis showed that LsAP2 affected the expression of auxin- and polarity-related genes. In addition, LsAP2 directly repressed the abaxial identity gene KANADI2 (LsKAN2). Together, these results indicate that LsAP2 regulates leaf morphology by inhibiting CIN-like TCP transcription factors and repressing LsKAN2, and our work provides insights into the regulatory mechanisms of leaf development in lettuce.

Quantitative proteomic analyses reveal that energy metabolism and protein biosynthesis reinitiation are responsible for the initiation of bolting induced by high temperature in lettuce (Lactuca sativa L.)

BACKGROUND

Lettuce (Lactuca sativa L.), one of the most economically important leaf vegetables, exhibits early bolting under high-temperature conditions. Early bolting leads to loss of commodity value and edibility, leading to considerable loss and waste of resources. However, the initiation and molecular mechanism underlying early bolting induced by high temperature remain largely elusive.

RESULTS

In order to better understand this phenomenon, we defined the lettuce bolting starting period, and the high temperature (33 °C) and controlled temperature (20 °C) induced bolting starting phase of proteomics is analyzed, based on the iTRAQ-based proteomics, phenotypic measurement, and biological validation by RT-qPCR. Morphological and microscopic observation showed that the initiation of bolting occurred 8 days after high-temperature treatment. Fructose accumulated rapidly after high-temperature treatment. During initiation of bolting, of the 3305 identified proteins, a total of 93 proteins exhibited differential abundances, 38 of which were upregulated and 55 downregulated. Approximately 38% of the proteins were involved in metabolic pathways and were clustered mainly in energy metabolism and protein synthesis. Furthermore, some proteins involved in sugar synthesis were differentially expressed and were also associated with energy production.

CONCLUSIONS

This report is the first to report on the metabolic changes involved in the initiation of bolting in lettuce. Our study suggested that energy metabolism and ribosomal proteins are pivotal components during initiation of bolting. This study could provide a potential regulatory mechanism for the initiation of early bolting by high temperature, which could have applications in the manipulation of lettuce for breeding.

A Composite Analysis of Flowering Time Regulation in Lettuce

Plants undergo profound physiological changes when transitioning from vegetative to reproductive growth. These changes affect crop production, as in the case of leafy vegetables. Lettuce is one of the most valuable leafy vegetable crops in the world. Past genetic studies have identified multiple quantitative trait loci (QTLs) that affect the timing of the floral transition in lettuce. Extensive functional molecular studies in the model organism Arabidopsis provide the opportunity to transfer knowledge to lettuce to explore the mechanisms through which genetic variations translate into changes in flowering time. In this review, we integrated results from past genetic and molecular studies for flowering time in lettuce with orthology and functional inference from Arabidopsis. This summarizes the basis for all known genetic variation underlying the phenotypic diversity of flowering time in lettuce and how the genetics of flowering time in lettuce projects onto the established pathways controlling flowering time in plants. This comprehensive overview reveals patterns across experiments as well as areas in need of further study. Our review also represents a resource for developing cultivars with delayed flowering time.

Uncovering an Organ's Molecular Architecture at Single-Cell Resolution by Spatially Resolved Transcriptomics

Revealing fine-scale cellular heterogeneity among spatial context and the functional and structural foundations of tissue architecture is fundamental within biological research and pharmacology. Unlike traditional approaches involving single molecules or bulk omics, cutting-edge, spatially resolved transcriptomics techniques offer near-single-cell or even subcellular resolution within tissues. Massive information across higher dimensions along with position-coordinating labels can better map the whole 3D transcriptional landscape of tissues. In this review, we focus on developments and strategies in spatially resolved transcriptomics, compare the cell and gene throughput and spatial resolution in detail for existing methods, and highlight the enormous potential in biomedical research.

Genome-wide analysis of MADS-box family genes during flower development in lettuce

Lettuce (Lactuca sativa L.) is an important leafy vegetable consumed worldwide. Heat-induced bolting and flowering greatly limit lettuce production during the summer. Additionally, MADS-box transcription factors are important for various aspects of plant development and architecture (e.g., flowering and floral patterning). However, there has been no comprehensive study of lettuce MADS-box family genes. In this study, we identified 82 MADS-box family genes in lettuce, including 23 type I genes and 59 type II genes. Transcriptome profiling revealed that LsMADS gene expression patterns differ among the various floral stages and organs. Moreover, heat-responsive cis-elements were detected in the promoter regions of many LsMADS genes. An in situ hybridization assay of 10 homologs of flower-patterning genes and a yeast two-hybrid assay of the encoded proteins revealed that the ABC model is conserved in lettuce. Specifically, the APETALA1 (AP1) homolog in lettuce, LsMADS55, is responsive to heat and is specifically expressed in the inflorescence meristem and pappus bristles. The overexpression of LsMADS55 results in early flowering in Arabidopsis thaliana. Furthermore, we observed that the heat shock factor LsHSFB2A-1 can bind to the LsMADS55 promoter in lettuce. Therefore, a model was proposed for the LsMADS-regulated floral organ specification and heat-induced flowering in lettuce.

Translating Flowering Time From Arabidopsis thaliana to Brassicaceae and Asteraceae Crop Species

Flowering and seed set are essential for plant species to survive, hence plants need to adapt to highly variable environments to flower in the most favorable conditions. Endogenous cues such as plant age and hormones coordinate with the environmental cues like temperature and day length to determine optimal time for the transition from vegetative to reproductive growth. In a breeding context, controlling flowering time would help to speed up the production of new hybrids and produce high yield throughout the year. The flowering time genetic network is extensively studied in the plant model species Arabidopsis thaliana, however this knowledge is still limited in most crops. This article reviews evidence of conservation and divergence of flowering time regulation in A. thaliana with its related crop species in the Brassicaceae and with more distant vegetable crops within the Asteraceae family. Despite the overall conservation of most flowering time pathways in these families, many genes controlling this trait remain elusive, and the function of most Arabidopsis homologs in these crops are yet to be determined. However, the knowledge gathered so far in both model and crop species can be already exploited in vegetable crop breeding for flowering time control.