Fatal sepsis associated with a storage container leak permitting platelet contamination with environmental bacteria after pathogen reduction

Spectroscopic view on the interaction between the psoralen derivative amotosalen and DNA

Psoralens are eponymous for PUVA (psoralen plus UV-A radiation) therapy, which inter alia can be used to treat various skin diseases. Based on the same underlying mechanism of action, the synthetic psoralen amotosalen (AMO) is utilized in the pathogen reduction technology of the INTERCEPT® Blood System to inactivate pathogens in plasma and platelet components. The photophysical behavior of AMO in the absence of DNA is remarkably similar to that of the recently studied psoralen 4'-aminomethyl-4,5',8-trimethylpsoralen (AMT). By means of steady-state and time-resolved spectroscopy, intercalation and photochemistry of AMO and synthetic DNA were studied. AMO intercalates with a higher affinity into A,T-only DNA (KD = 8.9 × 10-5 M) than into G,C-only DNA (KD = 6.9 × 10-4 M). AMO covalently photobinds to A,T-only DNA with a reaction quantum yield of ΦR = 0.11. Like AMT, it does not photoreact following intercalation into G,C-only DNA. Femto- and nanosecond transient absorption spectroscopy reveals the characteristic pattern of photobinding to A,T-only DNA. For AMO and G,C-only DNA, signatures of a photoinduced electron transfer are recorded.

Growth and Distribution of Bacteria in Contaminated Whole Blood and Derived Blood Components

Introduction

Bacterial contamination of blood products presumably occurs mainly during blood collection, starting from low initial concentrations of 10-100 colony-forming units (CFUs) per bag. As little is known about bacterial growth behavior and distribution in stored whole blood (WB) and WB-derived blood products, this study aims to provide data on this subject.

Methods

WB units were inoculated with transfusion-relevant bacterial species (Acinetobacter baumannii, Bacillus cereus, Escherichia coli, Klebsiella pneumoniae, Listeria monocytogenes, Pseudomonas fluorescens, Serratia marcescens, Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus dysgalactiae, Streptococcus pyogenes, Yersinia enterocolitica; n = 12 for each species), stored for 22-24 h at room temperature, and then centrifuged for separation into plasma, red blood cells (RBCs), and buffy coats (BCs). The latter were pooled with 3 random donor BCs and one unit of PAS-E each to yield plasma-reduced platelet concentrates (PCs). Samples for bacterial colony counting were collected after WB storage and immediately after blood component production. Sterility testing in PCs (n = 12 for each species) was performed by bacterial culture after 7 days of storage.

Results

Bacterial growth in WB varied remarkably between donations and species. Streptococcus species produced the highest titers in WB, whereas Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli, and Pseudomonas fluorescens did not multiply. Centrifugation resulted in preferential accumulation of bacteria in BCs, with titers of up to 3.5 × 103 CFU/mL in BCs and up to ≤0.9 × 103 CFU/mL in BC-derived PCs. Overall, 72/144 PCs (50%) tested positive for bacteria after storage. Sterility test results were species-dependent, ranging from 12 of 12 PCs tested positive for Streptococcus pyogenes to 1 of 12 PCs positive for Escherichia coli. Bacterial contamination of RBC and plasma units was much less common and was associated with higher initial bacterial counts in the parent WB units.

Conclusions

Bacterial growth in WB is species-dependent and varies greatly between donations. Preferential accumulation of bacteria in BCs during manufacturing is a critical determinant of the contamination risk of BC-derived pooled PCs.

Implementation of amotosalen plus ultraviolet A-mediated pathogen reduction for all platelet concentrates in France: Impact on the risk of transfusion-transmitted infections

BACKGROUND AND OBJECTIVES

Pathogen reduction (PR) technology may reduce the risk of transfusion-transmitted infections (TTIs), notably transfusion-transmitted bacterial infection (TTBI) associated with platelet concentrates (PCs). PR (amotosalen/UVA treatment) was implemented for all PCs transfused in France in November 2017. No bacterial detection was in place beforehand. The study aimed to assess the impact of PR PC on TTI and TTBI near-miss occurrences.

MATERIALS AND METHODS

TTI and TTBI near-miss occurrences were compared before and after 100% PR implementation. The study period ran from 2013 to 2022. Over 300,000 PCs were transfused yearly.

RESULTS

No PC-related transmission of human immunodeficiency virus, hepatitis C virus, hepatitis B virus and human T-cell lymphotropic virus was reported throughout the study period. PC-mediated hepatitis E virus and hepatitis A virus infections occurred irrespective of PR implementation. Mean PC-mediated TTBI occurrence before PR-PC implementation was 3/year (SD: 1; n = 15; 1/92,687 PC between 2013 and 2016) with a fatal outcome in two patients. Since PR implementation, one TTBI has been reported (day 4 PC, Bacillus cereus) (1/1,645,295 PC between 2018 and 2022; p < 0.001). Two PR PC quarantined because of a negative swirling test harboured bacteria: a day 6 PC in 2021 (B. cereus and Staphylococcus epidermidis) and a day 7 PC in 2022 (Staphylococcus aureus). Five similar occurrences with untreated PC were reported between 2013 and 2020.

CONCLUSION

Transfusion of 100% PR PC resulted in a steep reduction in TTBI occurrence. TTBI may, however, still occur. Pathogen-reduced PC-related TTI involving non-enveloped viruses occurs as well.

Bacterial Contamination of Platelet Products

Transfusion of bacterially contaminated platelets, although rare, is still a major cause of mortality and morbidity despite the introduction of many methods to limit this over the past 20 years. The methods used include improved donor skin disinfection, diversion of the first part of donations, use of apheresis platelet units rather than whole-blood derived pools, primary and secondary testing by culture or rapid test, and use of pathogen reduction. Primary culture has been in use the US since 2004, using culture 24 h after collection of volumes of 4-8 mL from apheresis collections and whole-blood derived pools inoculated into aerobic culture bottles, with limited use of secondary testing by culture or rapid test to extend shelf-life from 5 to 7 days. Primary culture was introduced in the UK in 2011 using a "large-volume, delayed sampling" (LVDS) protocol requiring culture 36-48 h after collection of volumes of 16 mL from split apheresis units and whole-blood derived pools, inoculated into aerobic and anaerobic culture bottles (8 mL each), with a shelf-life of 7 days. Pathogen reduction using amotosalen has been in use in Europe since 2002, and was approved for use in the US in 2014. In the US, recent FDA guidance, effective October 2021, recommended several strategies to limit bacterial contamination of platelet products, including pathogen reduction, variants of the UK LVDS method and several two-step strategies, with shelf-life ranging from 3 to 7 days. The issues associated with bacterial contamination and these strategies are discussed in this review.

How do we design a laboratory space for a hospital transfusion medicine service?

BACKGROUND

Transfusion service laboratories (TSL) often need to renovate or design new laboratory space, and their leaders must be involved in the complex and multifaceted design process.

STUDY DESIGN AND METHODS

This manuscript outlines the design process and considerations for a dedicated TSL space.

RESULTS

Proactive engagement with key collaborators throughout the design process is essential. Major design considerations include physical features such as location, size, service/equipment needs, and zones within the laboratory; intangible issues such as efficiency, well-being, and disaster planning; and adaptations for suboptimal space and changes over time.

CONCLUSION

Investing in the design of the laboratory space facilitates high-quality TSL operations, productivity, customer satisfaction, regulatory compliance, staff well-being, and most importantly, patient safety.

Septic Transfusion Reactions Involving Burkholderia cepacia Complex: A Review

This review was conducted to assess the global incidence of transfusion-transmitted infections (TTIs) caused by contamination of blood components with the Burkholderia cepacia complex (Bcc). Our search encompassed various specialized databases such as Medline/PubMed, Web of Science, Scopus, Scielo, ScienceDirect, and ClinicalKey. An analysis of the literature revealed a total of eleven reported cases where blood components contaminated with Bcc had been transfused, resulting in sepsis among the affected patients. Of these cases, eight were documented in the literature, while the remaining three occurred within the institution involving the authors of this review. A comparative examination was conducted, considering factors such as primary diagnosis, transfused blood component, time elapsed between transfusion and manifestation of symptoms, administration of antibiotics, and final outcome. Interestingly, regardless of the storage temperature, all blood components were found to be susceptible to Bcc contamination. Furthermore, the cases investigated revealed diverse sources of contamination, and it was observed that all the affected patients had compromised immune systems due to underlying illnesses. Based on these findings, a series of preventive strategies were derived to mitigate and decrease the occurrence of similar cases.

Listeria monocytogenes Transmission from Donated Blood to Platelet Transfusion Recipient, Italy

We report Listeria monocytogenes infection in a patient in Italy who was transfused with pooled platelet concentrate. Genomic analysis revealed that L. monocytogenes isolates from the donor blood unit, the transfused platelets, and the patient's blood culture were genetically closely related, confirming transfusion transmission. Additional surveillance and secondary bacterial screening could improve transfusion safety.

Posttransfusion Sepsis Attributable to Bacterial Contamination in Platelet Collection Set Manufacturing Facility, United States

During May 2018‒December 2022, we reviewed transfusion-transmitted sepsis cases in the United States attributable to polymicrobial contaminated apheresis platelet components, including Acinetobacter calcoaceticus‒baumannii complex or Staphylococcus saprophyticus isolated from patients and components. Transfused platelet components underwent bacterial risk control strategies (primary culture, pathogen reduction or primary culture, and secondary rapid test) before transfusion. Environmental samples were collected from a platelet collection set manufacturing facility. Seven sepsis cases from 6 platelet donations from 6 different donors were identified in patients from 6 states; 3 patients died. Cultures identified Acinetobacter calcoaceticus‒baumannii complex in 6 patients and 6 transfused platelets, S. saprophyticus in 4 patients and 4 transfused platelets. Whole-genome sequencing showed environmental isolates from the manufacturer were closely related genetically to patient and platelet isolates, indicating the manufacturer was the most probable source of recurrent polymicrobial contamination. Clinicians should maintain awareness of possible transfusion-transmitted sepsis even when using bacterial risk control strategies.

Microbiological environmental contamination in the blood supply chain: An international survey by the bacterial subgroup of the ISBT Transfusion-Transmitted Infectious Diseases Working Party

BACKGROUND AND OBJECTIVES

Blood transfusion centres ensure the quality and safety of transfusable blood components. However, septic transfusion reactions involving environmental contaminants occur. An international survey issued by the ISBT Transfusion-Transmitted Infectious Diseases Working Party (ISBT-TTID-WP) Bacterial Subgroup aimed to collect information regarding microbiological environmental monitoring from transfusion services.

MATERIALS AND METHODS

A Form survey (English and Spanish) with 35 questions was sent to ISBT-TTID-WP members. The survey had four sections: (1) respondent personal information, (2) cleaning/disinfection practices during blood component manufacturing, (3) cleaning/disinfection practices during blood component storage and (4) blood component storage bag integrity. Respondents completed the survey electronically, and data were comparatively analysed using Microsoft Excel.

RESULTS

There were 49 responses from 20 countries. Five of 49 sites manufacture blood components in a cleanroom, and most use personal protective equipment, although the type varied between sites. Approximately 40% of sites perform environmental monitoring during blood component production, with seven sites providing details about frequency and methods. Most (~94%) centres have procedures for cleaning/disinfection of processing and storage facilities with varying responses regarding areas, frequency and methods. Inconsistency was reported regarding the orientation of platelet component incubation (portrait vs. landscape). Over 93% of sites assess storage bag integrity and report damage to manufacturers, and 49% of centres report septic transfusion reactions potentially linked to damaged storage containers.

CONCLUSION

Data from this survey highlight the need for consensual guidelines for transfusion services regarding cleaning and disinfection practices. Environmental monitoring could be adopted to minimize the risk of blood component contamination for transfusion patient safety.

Platelet transfusion in adults: An update

Many patients worldwide receive platelet components (PCs) through the transfusion of diverse types of blood components. PC transfusions are essential for the treatment of central thrombocytopenia of diverse causes, and such treatment is beneficial in patients at risk of severe bleeding. PC transfusions account for almost 10% of all the blood components supplied by blood services, but they are associated with about 3.25 times as many severe reactions (attributable to transfusion) than red blood cell transfusions after stringent in-process leukoreduction to less than 10⁶ residual cells per blood component. PCs are not homogeneous, due to the considerable differences between donors. Furthermore, the modes of PC collection and preparation, the safety precautions taken to limit either the most common (allergic-type reactions and febrile non-hemolytic reactions) or the most severe (bacterial contamination, pulmonary lesions) adverse reactions, and storage and conservation methods can all result in so-called PC "storage lesions". Some storage lesions affect PC quality, with implications for patient outcome. Good transfusion practices should result in higher levels of platelet recovery and efficacy, and lower complication rates. These practices include a matching of tissue ABH antigens whenever possible, and of platelet HLA (and, to a lesser extent, HPA) antigens in immunization situations. This review provides an overview of all the available information relating to platelet transfusion, from donor and donation to bedside transfusion, and considers the impact of the measures applied to increase transfusion efficacy while improving safety and preventing transfusion inefficacy and refractoriness. It also considers alternatives to platelet component (PC) transfusion.

Presence of Gram-negative bacteria and Staphylococcus aureus on the skin of blood donors in the Democratic Republic of the Congo

BACKGROUND

Skin bacteria may contaminate blood products but few data are available on sub-Saharan Africa (sSA). We assessed the presence of Gram-negative bacteria and Staphylococcus aureus on blood donor skin and evaluated skin antisepsis in the Democratic Republic of the Congo (DRC).

STUDY DESIGN AND METHODS

Among blood donors at the National Blood Transfusion Center (NBTC) and at a rural hospital, the antecubital fossa skin of the non-disinfected arm (not used for blood collection) was swabbed (25cm² surface) and cultured for total and Gram-negative bacterial counts. Bacteria were identified with MALDI-TOF and tested for antibiotic susceptibility by disk diffusion. For evaluation of the NBTC antisepsis procedure (i.e., ethanol 70%), the culture results of the disinfected arm (used for blood collection) were compared with those of the non-disinfected arm.

RESULTS

Median total bacterial counts on 161 studied non-disinfected arms were 1065 Colony-Forming Units (CFU) per 25 cm² , with 43.8% (70/160) of blood donors growing Gram-negative bacteria and 3.8% (6/159) Staphylococcus aureus (2/6 methicillin-resistant). Non-fermentative Gram-negative rods predominated (74/93 isolates, majority Pseudomonas spp., Acinetobacter spp.). Enterobacterales comprised 19/93 isolates (mostly Pantoea spp. and Enterobacter spp.), 5/19 were multidrug-resistant. In only two cases (1.9%, 2/108) the NBTC antisepsis procedure met the acceptance criterion of ≤2 CFU/25 cm² .

CONCLUSION

Skin bacterial counts and species among blood donors in DRC were similar to previously studied Caucasian populations, including cold-tolerating species and bacteria previously described in transfusion reactions. Prevention of contamination (e.g., antisepsis) needs further evaluation and customization to sSA.

Methods and Advances in the Design, Testing and Development of In Vitro Diagnostic Instruments

With the continuous improvement of medical testing and instrumentation engineering technologies, the design, testing and development methods of in vitro diagnostic instruments are developing rapidly. In vitro diagnostic instruments are also gradually developing into a class of typical high-end medical equipment. The design of in vitro diagnostic instruments involves a variety of medical diagnostic methods and biochemical, physical and other related technologies, and its development process involves complex system engineering. This paper systematically organizes and summarizes the design, testing and development methods of in vitro diagnostic instruments and their development in recent years, focusing on summarizing the related technologies and core aspects of the R&D process, and analyzes the development trend of the in vitro diagnostic instrument market.

Assessment of polymicrobial interactions in bacterial isolates from transfused platelet units associated with sepsis

BACKGROUND

In 2019 the Centers for Disease Control and Prevention (CDC) reported a series of 4 transfusion reactions that resulted from contamination of apheresis platelet products. Products involved in all 4 cases were contaminated with Acinetobacter calcoaceticus-baumannii complex (ACBC) and in 3 products Staphylococcus saprophyticus was found as well. CDC investigation found that bacterial isolates from the cases were genetically related and suggested a common source of contamination. The contamination of blood products with ACBC is rare and polymicrobial contamination of blood products even less common. ACBC and S. saprophyticus have been observed to adhere to one another and sediment out of suspension in vitro, a process referred to as coaggregation, and we hypothesized that there was an interaction between the strains from these cases that contributed to their co-contamination of blood products.

STUDY DESIGN AND METHODS

To test the hypothesis of bacterial interaction, we performed coaggregation experiments and observed the growth characteristics of ACBC and S. saprophyticus strains recovered from contaminated blood products involved in a subset of the CDC cases.

RESULTS

An increase in S. saprophyticus CFU concentration was observed after several days of co-culture with ACBC in LB and plasma; however, no other findings suggested coaggregation or augmentative growth interaction between the bacterial strains.

CONCLUSION

Ultimately, an interaction between ACBC and S. saprophyticus that could help explain their co-occurrence and growth in contaminated platelet units was not found; however future studies of potential interactions may be warranted.

Application of Standardized Residual Component Culture Criteria for Suspected Septic Transfusion Reactions Would Increase the Component Culturing Rate at a Single Academic Medical Center

OBJECTIVES

The 2019 SCARED study developed the Biomedical Excellence for Safer Transfusion (BEST) criteria in an effort to standardize the decision to culture residual units in the context of suspected septic transfusion reactions (STRs). The goal of this study was to apply the BEST criteria to determine the effect on the transfusion reaction decision to culture.

METHODS

This retrospective, single-center, cross-sectional study assessed adult transfusion reactions identified in calendar years 2013 to 2020. Reactions following transfusion of RBCs, platelets, and plasma were included, and the decisions to culture following strict application of BEST criteria were compared with decisions to culture in actual practice.

RESULTS

In total, 1,068 transfusion reactions were reported and 200 (19%) suspected STRs were cultured, all with negative results; 303 (28%) reactions would have been cultured per strict application of the BEST criteria. Concordance between actual culture decision and BEST criteria recommendation was 62% for cultured components and 79% for components that were not cultured.

CONCLUSIONS

BEST criteria provide objective recommendations of when to culture residual units implicated in suspected STRs, but strict application of these criteria may result in increased culture rates. Clinical correlation to aid in the decision to culture is recommended.

The international experience of bacterial screen testing of platelet components with automated microbial detection systems: An update

In 2014, the bacterial subgroup of the Transfusion-Transmitted Infectious Diseases working party of ISBT published a review on the International Experience of Bacterial Screen Testing of Platelet Components (PCs) with an Automated Microbial Detection System. The purpose of this review, which is focused on publications on or after 2014, is to summarize recent experiences related to bacterial contamination of PCs and the use of an automated culture method to safeguard the blood supply. We first reviewed septic transfusion reactions after PC transfusion as reported in national haemovigilance systems along with a few reports from various countries on bacterial contamination of blood products. Next, we reviewed PC automated culture protocols employed by national blood services in the United Kingdom, Australia, Canada and large blood collection organization and hospital transfusion services in the United States. Then, we acknowledged the limitations of currently available culture methodologies in abating the risks of transfusion-transmitted bacterial infection, through a review of case reports. This review was neither meant to be critical of the literature reviewed nor meant to identify or recommend a best practice. We concluded that significant risk reduction can be achieved by one or a combination of more than one strategy. No one approach is feasible for all institutions worldwide. In selecting strategies, institutions should consider the possible impact on platelet components availability and entertain a risk-based decision-making approach that accounts for operational, logistical and financial factors.

Economic implications of FDA platelet bacterial guidance compliance options: Comparison of single-step strategies

BACKGROUND

Bloodborne pathogens pose a major safety risk in transfusion medicine. To mitigate the risk of bacterial contamination in platelet units, FDA issues updated guidance materials on various bacterial risk control strategies (BRCS). This analysis presents results of a budget impact model updated to include 5- and 7-day pathogen reduced (PR) and large volumed delayed sampling (LVDS) BRCS.

STUDY DESIGN AND METHODS

Model base-case parameter inputs were based on scientific literature, a survey distributed to 27 US hospitals, and transfusion experts' opinion. The outputs include hospital budget and shelf-life impacts for 5- and 7-day LVDS, and 5- and 7-day PR units under three different scenarios: (1) 100% LVDS, (2) 100% PR, and (3) mix of 50% LVDS - and 50% PR.

RESULTS

Total annual costs from the hospital perspective were highest for 100% LVDS platelets (US$2.325M) and lowest for 100% PR-7 units (US$2.170M). Net budget impact after offsetting annual costs by outpatient reimbursements was 5.5% lower for 5-day PR platelets as compared to 5-day LVDS (US$1.663 vs. US$1.760M). A mix of 7-day LVDS and 5-day PR platelets had net annual costs that were 1.3% lower than for 100% 7-day LVDS, but 1.3% higher than for 100% 5-day PR. 7-day PR platelets had the longest shelf life (4.63 days), while 5-day LVDS had the shortest (2.00 days).

DISCUSSION

The model identifies opportunities to minimize transfusion center costs for 5- and 7-day platelets. Budget impact models such as this are important for understanding the financial implications of evolving FDA guidance and new platelet technologies.

Acquired platelet storage container leaks and contamination with environmental bacteria: A preventable cause of bacterial sepsis

Background

Apheresis platelets (AP) may be contaminated by environmental bacteria via container defects acquired during processing, transport, storage, or transfusion, as highlighted by a recent series of septic reactions related to Acinetobacter spp. and other bacterial strains.

Study design and methods

The frequency and nature of acquired container defect reports to one manufacturer were evaluated from January 2019 to July 2020. The published incidence of contamination and sepsis due to environmental bacteria with culture screened AP in the United States was reviewed for the period of 2010–2019.

Results

Review of a manufacturers' records showed 23 US reports of leaks involving 24 containers attributed to postmanufacturing damage, at a rate of 44 per million distributed storage containers. Analysis of returned containers showed evidence of scratches, impressions, and/or piercings. Literature review of US hemovigilance data revealed that environmental bacteria comprised 7% of confirmed positive primary bacterial culture screens, were responsible for 14%–16% of reported septic, and 8 of 28 (29%) fatal reactions with bacterial‐culture screened AP. Sepsis cases have been reported with culture screened, point‐of‐issue (POI) tested, or pathogen‐reduced AP.

Discussion

Environmental contamination of AP is rare but can cause sepsis. Container damage provides a pathway for contamination after culture screening, POI bacteria testing, or pathogen reduction. Blood collectors and transfusion services should have procedures to ensure proper inspection, handling, storage, and transport of AP to avoid damage and should enhance efforts to detect defects prior to release and to eliminate bacteria from all contacting surfaces to minimize the risk of contamination.

Evaluation of an improved rapid bacterial assay with untreated and pathogen-reduced platelets: Detection of Acinetobacter strains

Background

The PGDprime® test was updated to enable Acinetobacter spp. detection to respond to morbidity and mortality events in 2018 and 2020 involving platelets contaminated with Acinetobacter‐calcoaceticus‐baumannii complex (ACBC). In one morbidity event, the first‐generation PGD test failed to detect ACBC. In two other reported events, pathogen‐reduced (PR) platelets contaminated with ACBC and other bacteria led to patient morbidity and one death.

Study Design and Methods

A polyclonal antibody to Acinetobacter was integrated in the test device and evaluated for detection of Acinetobacter spp., including the ACBC isolate recovered in one of the 2018 contamination events. Limits of Detection for various Acinetobacter strains were determined in dilution studies. Detection of Acinetobacter growing in platelets after an initial low inoculum was evaluated. Use of the updated test as a secondary test after pathogen reduction was also evaluated by testing at 12‐h intervals PR platelet units inoculated with low levels of the 3 species reported in the fatal PR platelet: ACBC, Staphylococcus saprophyticus, and Leclercia adecarboxylata.

Results

The test detected several Acinetobacter strains at the clinically relevant CFU/ml levels associated with septic transfusions and successfully detected Acinetobacter growing in various non‐PR platelet types after an initial low inoculum. In PR platelets, the test yielded a positive result with the 3 implicated bacteria in 48 h or less after inoculation, or 48–72 h earlier than the reported time of transfusion of contaminated PR platelets.

Conclusion

PGDprime was improved to detect Acinetobacter and has shown utility to interdict contaminated PR platelets.