Evaluation of a Permanent Synthetic Osteochondral Implant in the Equine Medial Femoral Condyle

In vitro and in vivo study on the osseointegration of BCP-coated versus uncoated nondegradable thermoplastic polyurethane focal knee resurfacing implants

Focal knee resurfacing implants (FKRIs) are intended to treat cartilage defects in middle-aged patients. Most FKRIs are metal-based, which hampers follow-up of the joint using magnetic resonance imaging and potentially leads to damage of the opposing cartilage. The purpose of this study was to develop a nondegradable thermoplastic polyurethane (TPU) FKRI and investigate its osseointegration. Different surface roughness modifications and biphasic calcium phosphate (BCP) coating densities were first tested in vitro on TPU discs. The in vivo osseointegration of BCP-coated TPU implants was subsequently compared to uncoated TPU implants and the titanium bottom layer of metal control implants in a caprine model. Implants were implanted bilaterally in stifle joints and animals were followed for 12 weeks, after which the bone-to-implant contact area (BIC) was assessed. Additionally, 18F-sodium-fluoride (18F-NaF) positron emission tomography PET/CT-scans were obtained at 3 and 12 weeks to visualize the bone metabolism over time. The BIC was significantly higher for the BCP-coated TPU implants compared to the uncoated TPU implants (p = .03), and did not significantly differ from titanium (p = .68). Similar 18F-NaF tracer uptake patterns were observed between 3 and 12 weeks for the BCP-coated TPU and titanium implants, but not for the uncoated implants. TPU FKRIs with surface modifications could provide the answer to the drawbacks of metal FKRIs.

Preliminary evaluation of an osteochondral autograft, a prosthetic implant, and a biphasic absorbable implant for osteochondral reconstruction in a sheep model

OBJECTIVE

To determine the ability of three implants to enhance the healing of osteochondral defects: (1) a biphasic construct composed of calcium phosphate (CaP) and chitosan/cellulosic polymer, (2) a titanium-polyurethane implant, and (3) an osteochondral autograft.

STUDY DESIGN

Experimental study.

ANIMALS

Ten adult female sheep.

METHODS

In five sheep, an 8-mm diameter osteochondral defect was created on the medial femoral condyle of a stifle and filled with a synthetic titanium-polyurethane implant. In five sheep, a similar defect was filled with an osteochondral autograft, and the donor site was filled with a biphasic construct combining CaP granules and a chitosan/cellulosic polymer. Sheep were monitored daily for lameness. Stifle radiographs and MRI were evaluated at 20 weeks, prior to animals being humanely killed. Surgical sites were evaluated with histology, microcomputed tomography, and scanning electron microscopy.

RESULTS

Clinical outcomes were satisfactory regardless of the tested biomaterials. All implants appeared in place on imaging studies. Osteointegration of prosthetic implants varied between sites, with limited ingrowth of new bone into the titanium structure. Autografts and biphasic constructs were consistently well integrated in subchondral bone. All autografts except one contained a cartilage surface, and all biphasic constructs except one partially restored hyaline cartilage surface.

CONCLUSION

Biphasic constructs supported hyaline cartilage and subchondral bone regeneration, although restoration of the articular cartilage was incomplete.

CLINICAL IMPACT

Biphasic constructs may provide an alternative treatment for osteochondral defects, offering a less invasive approach compared with autologous grafts and eliminating the requirement for a prosthetic implant.

A short-term evaluation of a thermoplastic polyurethane implant for osteochondral defect repair in an equine model

Cartilage repair remains a major challenge and treatment of (osteo)chondral defects generally results in poor quality fibrous repair tissue. Our approach aims to address some of the major biomechanical issues encountered in scaffold-based cartilage repair, such as insufficient stiffness of the scaffolds, step formation at the interface with the native tissue and inadequate integration with the original tissue. Two osteochondral defects were created on the medial femoral trochlear ridge in each stifle of six Shetland ponies. The defects were filled with a bi-layered implant consisting of a polyetherketoneketone (PEKK) bone anchor and a polyurethane elastomer. The defects in the contralateral joint served as unfilled controls. After 12 weeks, the ponies were euthanased and tissues were evaluated macroscopically and using micro-computed tomography, histology and immunohistochemistry. Post-operative recovery was good in all ponies and minimal lameness was observed. After 12 weeks, the proximally located plug was partially covered (mean±standard deviation [SD] percentage surface area covered 72.5±19.7%) and the distal plug was nearly completely covered (mean±SD percentage surface area covered 98.5±6.1%) with stiff and smooth repair tissue. Histology and immunohistochemistry confirmed that the repair tissue was well connected to the native cartilage but contained negligible amounts of collagen type II and glycosaminoglycans (GAGs). The repair tissue was stiff and fibrous in nature and presented a nearly flush surface with the surrounding native cartilage distally. This approach therefore resolves a number of issues related to scaffold-based cartilage repair and compares favourably with results of several other studies in large animal models. However, long-term follow-up is needed to evaluate the true potential of this type of implant.

Synthetic osteochondral resurfacing for treatment of large caudocentral osteochondritis dissecans lesions of the humeral head in 24 dogs

OBJECTIVE

To report the outcome of dogs with large, caudocentral, osteochondritis dissecans (OCD) lesions of the humeral head treated with synthetic osteochondral resurfacing (SOR) implants.

STUDY DESIGN

Retrospective case series.

ANIMALS

Twenty-four client-owned large breed or giant dogs.

METHODS

The medical records of all dogs treated with first generation (G1) and second generation (G2) SOR implants were reviewed. All dogs were assessed with clinical examination and imaging 12 weeks after surgery. Assessment of outcome was based on subjective assessment of lameness, scoring of postoperative radiographs, and the Liverpool Osteoarthritis in Dogs (LOAD) questionnaire.

RESULTS

Osteochondral resurfacing was performed with a G1 implant in 13 dogs (15 shoulders) and a G2 implant in 11 dogs (13 shoulders). Lameness resolved in all dogs treated with G1 implants and in 10 dogs treated with G2 implants by 12 weeks after surgery. One dog treated with a G2 implant was found to have an implant-associated infection, requiring implant removal. No recurrence of lameness was reported in 9 limbs treated with G1 implants and 10 limbs treated with G2 implants that were available for clinical review at a median time of 387 and 365 days, respectively, after surgery. Mean postoperative LOAD scores were 4.2 of 52 and 5.2 of 52 in dogs treated with a G1 or a G2 implant, respectively.

CONCLUSION

Synthetic resurfacing was technically feasible in all joints of this study and resulted in good clinical results.

CLINICAL SIGNIFICANCE

The use of SOR implants seems viable to treat large caudocentral OCD lesions of the humeral head in dogs and warrants prospective comparison with conventional arthroscopic treatment.

Histopathological Evaluation of Orthopedic Medical Devices: The State-of-the-art in Animal Models, Imaging, and Histomorphometry Techniques

Orthopedic medical devices are continuously evolving for the latest clinical indications in craniomaxillofacial, spine, trauma, joint arthroplasty, sports medicine, and soft tissue regeneration fields, with a variety of materials from new metallic alloys and ceramics to composite polymers, bioresorbables, or surface-treated implants. There is great need for qualified medical device pathologists to evaluate these next generation biomaterials, with improved biocompatibility and bioactivity for orthopedic applications, and a broad range of knowledge is required to stay abreast of this ever-changing field. Orthopedic implants require specialized imaging and processing techniques to fully evaluate the bone-implant interface, and the pathologist plays an important role in determining the proper combination of histologic processing and staining for quality slide production based on research and development trials and validation. Additionally, histomorphometry is an essential part of the analysis to quantify tissue integration and residual biomaterials. In this article, an overview of orthopedic implants and animal models, as well as pertinent insights for tissue collection, imaging, processing, and slide generation will be provided with a special focus on histopathology and histomorphometry evaluation.

OSTEOCHONDRAL AUTOGRAFT TRANSFER FOR TREATMENT OF STIFLE OSTEOCHONDRITIS DISSECANS IN TWO RELATED SNOW LEOPARDS ( PANTHERA UNCIA)

Two related female snow leopards ( Panthera uncia) were diagnosed with osteochondritis dissecans of the lateral femoral condyle via radiographs and computed tomography. Lesions were either bilateral (Patient 1) or unilateral (Patient 2). Surgical treatment was performed using an osteochondral autograft transfer system following cartilage flap removal. After a 6-wk recovery period, both animals had a markedly improved gait with mild pelvic limb stiffness. Patient 1 developed intermittent lameness 9 mo postsurgery and Patient 2 had mild lameness 3 yr postsurgery. Because of recurrent lameness, both animals were treated with platelet-rich plasma intra-articular injections and oral gabapentin (Patient 1) or oral meloxicam (Patient 2). Full incorporation of autografts was confirmed with computed tomography (both patients) and arthroscopy (Patient 1 only). Osteochondritis dissecans has been previously reported in snow leopards and these cases represent the first reported use of osteochondral autograft repair and platelet-rich plasma to treat the condition.