Correlation of HSP70 expression and cell viability following thermal stimulation of bovine aortic endothelial cells

In Vitro Measurement and Mathematical Modeling of Thermally-Induced Injury in Pancreatic Cancer Cells

Thermal therapies are under investigation as part of multi-modality strategies for the treatment of pancreatic cancer. In the present study, we determined the kinetics of thermal injury to pancreatic cancer cells in vitro and evaluated predictive models for thermal injury. Cell viability was measured in two murine pancreatic cancer cell lines (KPC, Pan02) and a normal fibroblast (STO) cell line following in vitro heating in the range 42.5-50 °C for 3-60 min. Based on measured viability data, the kinetic parameters of thermal injury were used to predict the extent of heat-induced damage. Of the three thermal injury models considered in this study, the Arrhenius model with time delay provided the most accurate prediction (root mean square error = 8.48%) for all cell lines. Pan02 and STO cells were the most resistant and susceptible to hyperthermia treatments, respectively. The presented data may contribute to studies investigating the use of thermal therapies as part of pancreatic cancer treatment strategies and inform the design of treatment planning strategies.

A Review of In Vitro Instrumentation Platforms for Evaluating Thermal Therapies in Experimental Cell Culture Models

Thermal therapies, the modulation of tissue temperature for therapeutic benefit, are in clinical use as adjuvant or stand-alone therapeutic modalities for a range of indications, and are under investigation for others. During delivery of thermal therapy in the clinic and in experimental settings, monitoring and control of spatio-temporal thermal profiles contributes to an increased likelihood of inducing desired bioeffects. In vitro thermal dosimetry studies have provided a strong basis for characterizing biological responses of cells to heat. To perform an accurate in vitro thermal analysis, a sample needs to be subjected to uniform heating, ideally raised from, and returned to, baseline immediately, for a known heating duration under ideal isothermal condition. This review presents an applications-based overview of in vitro heating instrumentation platforms. A variety of different approaches are surveyed, including external heating sources (i.e., CO2 incubators, circulating water baths, microheaters and microfluidic devices), microwave dielectric heating, lasers or the use of sound waves. We discuss critical heating parameters including temperature ramp rate (heat-up phase period), heating accuracy, complexity, peak temperature, and technical limitations of each heating modality.

Nano-therapeutic cancer immunotherapy using hyperthermia-induced heat shock proteins: insights from mathematical modeling

BACKGROUND

Nano-therapeutic utilizing hyperthermia therapy in combination with chemotherapy, surgery, and radiation is known to treat various types of cancer. These cancer treatments normally focus on reducing tumor burden. Nevertheless, it is still challenging to confine adequate thermal energy in a tumor and obtain a complete tumor ablation to avoid recurrence and metastasis while leaving normal tissues unaffected. Consequently, it is critical to attain an alternative tumor-killing mechanism to circumvent these challenges. Studies have demonstrated that extracellular heat shock proteins (HSPs) activate antitumor immunity during tumor cell necrosis. Such induced immunity was further shown to assist in regressing tumor and reducing recurrence and metastasis. However, only a narrow range of thermal dose is reported to be able to acquire the optimal antitumor immune outcome. Consequently, it is crucial to understand how extracellular HSPs are generated.

MATERIALS AND METHODS

In this work, a predictive model integrating HSP synthesis mechanism and cell death model is proposed to elucidate the HSP involvement in hyperthermia cancer immune therapy and its relation with dead tumor cells. This new model aims to provide insights into the thermally released extracellular HSPs by dead tumor cells for a more extensive set of conditions, including various temperatures and heating duration time.

RESULTS

Our model is capable of predicting the optimal thermal parameters to generate maximum HSPs for stimulating antitumor immunity, promoting tumor regression, and reducing metastasis. The obtained nonlinear relation between extracellular HSP concentration and increased dead cell number, along with rising temperature, shows that only a narrow range of thermal dose is able to generate the optimal antitumor immune result.

CONCLUSION

Our predictive model is capable of predicting the optimal temperature and exposure time to generate HSPs involved in the antitumor immune activation, with a goal to promote tumor regression and reduce metastasis.

Pain Relief with Wet Cupping Therapy in Rats is Mediated by Heat Shock Protein 70 and ß-Endorphin

BACKGROUND

Wet cupping therapy is a complementary therapy in pain management. The mechanism of this therapy, however, needs further elucidation. Cells injured by wet cupping therapy seem to stimulate the expression of heat shock protein 70 (HSP70). Its benefit in pain reduction could be mediated by the expression of ß-endorphin. This study aimed at determining the correlation between HSP70 and ß-endorphin after wet cupping therapy.

METHODS

Sixteen male Wistar rats were divided into control (CG; n=8) and treatment (TG; n=8) groups. The rats in both groups were injected with complete Freund's adjuvant (CFA) at the footpad. In the TG, wet cupping therapy was done at the left and right paralumbar regions 48 hours after the CFA injection. Twenty-four hours after therapy, the hot plate test was done to assess pain threshold. Thereafter, immunohistochemistry from the skin subjected to wet cupping therapy was conducted for HSP70 and ß-endorphin.

RESULTS

The expression of HSP70 was significantly higher in the keratinocytes of the TG (20.25±3.53; P<0.001) than in the keratinocytes of the CG (10.50±2.44; P<0.001). The expression of ß-endorphin was significantly higher in the keratinocytes of the TG (22.37±3.52; P<0.001) than in the keratinocytes of the CG (5.12±1.72; P<0.001). The results also revealed a high correlation between HSP70 and ß-endorphin (β=0.864; P<0.001). Pain threshold after wet cupping therapy was significantly higher in the TG (22.81±6.34 s; P=0.003) than in the CG (11.78±3.56 s).

CONCLUSIONS

The benefit of wet cupping therapy in terms of pain reduction in rats could be mediated by the expression of HSP70 and ß-endorphin.

Thermally induced apoptosis, necrosis, and heat shock protein expression in 3D culture

This study was conducted to compare the heat shock responses of cells grown in 2D and 3D culture environments as indicated by the level of heat shock protein 70 expression and the incidence of apoptosis and necrosis of prostate cancer cell lines in response to graded hyperthermia. PC3 cells were stably transduced with a dual reporter system composed of two tandem expression cassettes-a conditional heat shock protein promoter driving the expression of green fluorescent protein (HSPp-GFP) and a cytomegalovirus (CMV) promoter controlling the constitutive expression of a "beacon" red fluorescent protein (CMVp-RFP). Two-dimensional and three-dimensional cultures of PC3 prostate cancer cells were grown in 96-well plates for evaluation of their time-dependent response to supraphysiological temperature. To induce controlled hyperthermia, culture plates were placed on a flat copper surface of a circulating water manifold that maintained the specimens within ±0.1°C of a target temperature. Hyperthermia protocols included various combinations of temperature, ranging from 37°C to 57°C, and exposure times of up to 2 h. The majority of protocols were focused on temperature and time permutations, where the response gradient was greatest. Post-treatment analysis by flow cytometry analysis was used to measure the incidences of apoptosis (annexin V-FITC stain), necrosis (propidium iodide (PI) stain), and HSP70 transcription (GFP expression). Cells grown in 3D compared with 2D culture showed reduced incidence of apoptosis and necrosis and a higher level of HSP70 expression in response to heat shock at the temperatures tested. Cells responded differently to hyperthermia when grown in 2D and 3D cultures. Three-dimensional culture appears to enhance survival plausibly by activating protective processes related to enhanced-HSP70 expression. These differences highlight the importance of selecting physiologically relevant 3D models in assessing cellular responses to hyperthermia in experimental settings.

Rationalization of thermal injury quantification methods: application to skin burns

Classification of thermal injury is typically accomplished either through the use of an equivalent dosimetry method (equivalent minutes at 43 °C, CEM43 °C) or through a thermal-injury-damage metric (the Arrhenius method). For lower-temperature levels, the equivalent dosimetry approach is typically employed while higher-temperature applications are most often categorized by injury-damage calculations. The two methods derive from common thermodynamic/physical chemistry origins. To facilitate the development of the interrelationships between the two metrics, application is made to the case of skin burns. This thermal insult has been quantified by numerical simulation, and the extracted time-temperature results served for the evaluation of the respective characterizations. The simulations were performed for skin-surface exposure temperatures ranging from 60 to 90 °C, where each surface temperature was held constant for durations extending from 10 to 110 s. It was demonstrated that values of CEM43 at the basal layer of the skin were highly correlated with the depth of injury calculated from a thermal injury integral. Local values of CEM43 were connected to the local cell survival rate, and a correlating equation was developed relating CEM43 with the decrease in cell survival from 90% to 10%. Finally, it was shown that the cell survival/CEM43 relationship for the cases investigated here most closely aligns with isothermal exposure of tissue to temperatures of ~50 °C.

Influence of heating and cyclic tension on the induction of heat shock proteins and bone-related proteins by MC3T3-E1 cells

Stress conditioning (e.g., thermal, shear, and tensile stress) of bone cells has been shown to enhance healing. However, prior studies have not investigated whether combined stress could synergistically promote bone regeneration. This study explored the impact of combined thermal and tensile stress on the induction of heat shock proteins (HSPs) and bone-related proteins by a murine preosteoblast cell line (MC3T3-E1). Cells were exposed to thermal stress using a water bath (44°C for 4 or 8 minutes) with postheating incubation (37°C for 4 hours) followed by exposure to cyclic strain (equibiaxial 3%, 0.2 Hz, cycle of 10-second tensile stress followed by 10-second rest). Combined thermal stress and tensile stress induced mRNA expression of HSP27 (1.41 relative fold induction (RFI) compared to sham-treated control), HSP70 (5.55 RFI), and osteopontin (1.44 RFI) but suppressed matrix metalloproteinase-9 (0.6 RFI) compared to the control. Combined thermal and tensile stress increased vascular endothelial growth factor (VEGF) secretion into the culture supernatant (1.54-fold increase compared to the control). Therefore, combined thermal and mechanical stress preconditioning can enhance HSP induction and influence protein expression important for bone tissue healing.

A new in vitro model to study cellular responses after thermomechanical damage in monolayer cultures

Although electrosurgical instruments are widely used in surgery to cut tissue layers or to achieve hemostasis by coagulation (electrocautery), only little information is available concerning the inflammatory or immune response towards the debris generated. Given the elevated local temperatures required for successful electrocautery, the remaining debris is likely to contain a plethora of compounds entirely novel to the intracorporal setting. A very common in vitro method to study cell migration after mechanical damage is the scratch assay, however, there is no established model for thermomechanical damage to characterise cellular reactions. In this study, we established a new in vitro model to investigate exposure to high temperature in a carefully controlled cell culture system. Heatable thermostat-controlled aluminium stamps were developed to induce local damage in primary human umbilical vein endothelial cells (HUVEC). The thermomechanical damage invoked is reproducibly locally confined, therefore allowing studies, under the same experimental conditions, of cells affected to various degrees as well as of unaffected cells. We show that the unaffected cells surrounding the thermomechanical damage zone are able to migrate into the damaged area, resulting in a complete closure of the ‘wound’ within 48 h. Initial studies have shown that there are significant morphological and biological differences in endothelial cells after thermomechanical damage compared to the mechanical damage inflicted by using the unheated stamp as a control. Accordingly, after thermomechanical damage, cell death as well as cell protection programs were activated. Mononuclear cells adhered in the area adjacent to thermomechanical damage, but not to the zone of mechanical damage. Therefore, our model can help to understand the differences in wound healing during the early phase of regeneration after thermomechanical vs. mechanical damage. Furthermore, this model lends itself to study the response of other cells, thus broadening the range of thermal injuries that can be analysed.

An exploration of heat tolerance in mice utilizing mRNA and microRNA expression analysis

BACKGROUND

Individuals who rapidly develop hyperthermia during heat exposure (heat-intolerant) are vulnerable to heat associated illness and injury. We recently reported that heat intolerant mice exhibit complex alterations in stress proteins in response to heat exposure. In the present study, we further explored the role of genes and molecular networks associated with heat tolerance in mice.

METHODOLOGY

Heat-induced physiological and biochemical changes were assessed to determine heat tolerance levels in mice. We performed RNA and microRNA expression profiling on mouse gastrocnemius muscle tissue samples to determine novel biological pathways associated with heat tolerance.

PRINCIPAL FINDINGS

Mice (n = 18) were assigned to heat-tolerant (TOL) and heat-intolerant (INT) groups based on peak core temperatures during heat exposures. This was followed by biochemical assessments (Hsp40, Hsp72, Hsp90 and Hsf1 protein levels). Microarray analysis identified a total of 3,081 mRNA transcripts that were significantly misregulated in INT compared to TOL mice (p<0.05). Among them, Hspa1a, Dnajb1 and Hspb7 were differentially expressed by more than two-fold under these conditions. Furthermore, we identified 61 distinct microRNA (miRNA) sequences significantly associated with TOL compared to INT mice; eight miRNAs corresponded to target sites in seven genes identified as being associated with heat tolerance pathways (Hspa1a, Dnajb1, Dnajb4, Dnajb6, Hspa2, Hspb3 and Hspb7).

CONCLUSIONS

The combination of mRNA and miRNA data from the skeletal muscle of adult mice following heat stress provides new insights into the pathophysiology of thermoregulatory disturbances of heat intolerance.

Kinetic and structural evidences on human prolidase pathological mutants suggest strategies for enzyme functional rescue

Prolidase is the only human enzyme responsible for the digestion of iminodipeptides containing proline or hydroxyproline at their C-terminal end, being a key player in extracellular matrix remodeling. Prolidase deficiency (PD) is an intractable loss of function disease, characterized by mutations in the prolidase gene. The exact causes of activity impairment in mutant prolidase are still unknown. We generated three recombinant prolidase forms, hRecProl-231delY, hRecProl-E412K and hRecProl-G448R, reproducing three mutations identified in homozygous PD patients. The enzymes showed very low catalytic efficiency, thermal instability and changes in protein conformation. No variation of Mn(II) cofactor affinity was detected for hRecProl-E412K; a compromised ability to bind the cofactor was found in hRecProl-231delY and Mn(II) was totally absent in hRecProl-G448R. Furthermore, local structure perturbations for all three mutants were predicted by in silico analysis. Our biochemical investigation of the three causative alleles identified in perturbed folding/instability, and in consequent partial prolidase degradation, the main reasons for enzyme inactivity. Based on the above considerations we were able to rescue part of the prolidase activity in patients’ fibroblasts through the induction of Heath Shock Proteins expression, hinting at new promising avenues for PD treatment.

Response of preosteoblasts to thermal stress conditioning and osteoinductive growth factors

Conditioning protocols involving mechanical stress independently or with chemical cues such as growth factors (GFs) possess significant potential to enhance bone regeneration. However, utilization of thermal stress conditioning alone or with GFs for bone therapy has been under-investigated. In this study, a preosteoblast cell line (MC3T3-E1) was exposed to treatment with water bath heating (44°C, 4 and 8 min) and osteoinductive GFs (bone morphogenetic protein-2 and transforming growth factor-β1) individually or in combination to investigate whether these stimuli could promote induction of bone-related markers, an angiogenic factor, and heat shock proteins (HSPs). Cells remained viable when heating durations were less than 20 min at 40ºC, 16 min at 42ºC, and 10 min at 44ºC. Increasing heating duration at 44°C, promoted gene expression of HSPs, osteocalcin (OCN), and osteopontin (OPN) at 8 h post-heating (PH). Heating in combination with GFs caused the greatest gene induction of osteoprotegerin (OPG; 6.9- and 1.6-fold induction compared to sham-treated and GF only treated groups, respectively) and vascular endothelial growth factor (VEGF; 16.0- and 1.6-fold compared to sham and GF-only treated groups, respectively) at 8 h PH. Both heating and GFs independently suppressed the matrix metalloproteinase-9 (MMP-9) gene. GF treatment caused a more significant decrease in MMP-9 protein secretion to non-detectable levels compared to heating alone at 72 h PH. Secretion of OCN, OPN, and OPG increased with the addition of GFs but diminished with heating as measured by ELISA at 72 h PH. These results suggest that conditioning protocols utilizing heating and GFs individually or in combination can induce HSPs, bone-related proteins, and VEGF while also causing downregulation of osteoclastic activity, potentially providing a promising bone therapeutic strategy.

Response of a preosteoblastic cell line to cyclic tensile stress conditioning and growth factors for bone tissue engineering

Bone regeneration can be accelerated by utilizing mechanical stress and growth factors (GFs). However, a limited understanding exists regarding the response of preosteoblasts to tensile stress alone or with GFs. We measured cell proliferation and expression of heat-shock proteins (HSPs) and other bone-related proteins by preosteoblasts following cyclic tensile stress (1%-10% magnitude) alone or in combination with bone morphogenetic protein-2 (BMP-2) and transforming growth factor-β1 (TGF-β1). Tensile stress (3%) with GFs induced greater gene upregulation of osteoprotegerin (3.3 relative fold induction [RFI] compared to sham-treated samples), prostaglandin E synthase 2 (2.1 RFI), and vascular endothelial growth factor (VEGF) (11.5 RFI), compared with samples treated with stimuli alone or sham-treated samples. The most significant increases in messenger RNA expression occurred with GF addition to either static-cultured or tensile-loaded (1% elongation) cells for the following genes: HSP47 (RFI=2.53), cyclooxygenase-2 (RFI=72.52), bone sialoprotein (RFI=11.56), and TGF-β1 (RFI=8.05). Following 5% strain with GFs, VEGF secretion increased 64% (days 3-6) compared with GF alone and cell proliferation increased 23% compared with the sham-treated group. GF addition increased osteocalcin secretion but decreased matrix metalloproteinase-9 significantly (days 3-6). Tensile stress and GFs in combination may enhance bone regeneration by initiating angiogenic and anti-osteoclastic effects and promote cell growth.

Microarray analysis of cellular thermotolerance

BACKGROUND AND OBJECTIVES

Previously, we have shown that a 43°C pretreatment can provide thermotolerance to a following, more severe, thermal stress at 45°C. Using cells that lack the Hsp70 gene, we have also shown that there is still some thermotolerance in the absence of HSP70 protein. The purpose of this study was to determine which genes play a role in thermotolerance by measuring viability and proliferation of the cells at 2 days after heating. Specifically, we wanted to understand which pathways may be responsible for protecting cells in the absence of HSP70.

STUDY DESIGN/MATERIALS AND METHODS

Murine embryonic fibroblast cells with and without Hsp70 (MEF(+/+) and MEF(-/-), respectively) were exposed to a mild heat shock of 43°C for 30 minutes in a constant temperature water bath. After 3 hours of recovery, RNA was harvested from three heated samples alongside three untreated controls using a MicroRNeasy kit with DNAse treatment. RNA quality was verified by an Agilent Bioanalyzer. The RNA was then converted to cDNA and hybridized to Affymetrix gene expression DNA microarrays. The genes that showed a twofold change (up or down) relative to unheated controls were filtered by t-test for significance at a threshold of P < 0.05 using Genespring software. Data were verified by qRT-PCR. Genes were then categorized based upon their ontology.

RESULTS

While many genes were similarly upregulated, the main difference between cell types was an increase in transcription factors and nucleic acid binding proteins. Several genes known to be involved in the heat response were upregulated more than twofold (Hsp70, Hsp40, Hsp110, Hsp25, Atf3), however, another well studied heat responsive gene Hsp90 only increased by 1.5-fold under these conditions despite its role in thermotolerance.

CONCLUSIONS

The data herein presents genetic pathways which are candidates for further study of pretreatment protocols in laser irradiation.

Image-guided genomic analysis of tissue response to laser-induced thermal stress

The cytoprotective response to thermal injury is characterized by transcriptional activation of "heat shock proteins" (hsp) and proinflammatory proteins. Expression of these proteins may predict cellular survival. Microarray analyses were performed to identify spatially distinct gene expression patterns responding to thermal injury. Laser injury zones were identified by expression of a transgene reporter comprised of the 70 kD hsp gene and the firefly luciferase coding sequence. Zones included the laser spot, the surrounding region where hsp70-luc expression was increased, and a region adjacent to the surrounding region. A total of 145 genes were up-regulated in the laser irradiated region, while 69 were up-regulated in the adjacent region. At 7 hours the chemokine Cxcl3 was the highest expressed gene in the laser spot (24 fold) and adjacent region (32 fold). Chemokines were the most common up-regulated genes identified. Microarray gene expression was successfully validated using qRT- polymerase chain reaction for selected genes of interest. The early response genes are likely involved in cytoprotection and initiation of the healing response. Their regulatory elements will benefit creating the next generation reporter mice and controlling expression of therapeutic proteins. The identified genes serve as drug development targets that may prevent acute tissue damage and accelerate healing.

Thermostability of biological systems: fundamentals, challenges, and quantification

This review examines the fundamentals and challenges in engineering/understanding the thermostability of biological systems over a wide temperature range (from the cryogenic to hyperthermic regimen). Applications of the bio-thermostability engineering to either destroy unwanted or stabilize useful biologicals for the treatment of diseases in modern medicine are first introduced. Studies on the biological responses to cryogenic and hyperthermic temperatures for the various applications are reviewed to understand the mechanism of thermal (both cryo and hyperthermic) injury and its quantification at the molecular, cellular and tissue/organ levels. Methods for quantifying the thermophysical processes of the various applications are then summarized accounting for the effect of blood perfusion, metabolism, water transport across cell plasma membrane, and phase transition (both equilibrium and non-equilibrium such as ice formation and glass transition) of water. The review concludes with a summary of the status quo and future perspectives in engineering the thermostability of biological systems.

Photothermal response of human and murine cancer cells to multiwalled carbon nanotubes after laser irradiation

This study demonstrates the capability of multiwalled carbon nanotubes (MWNTs) coupled with laser irradiation to enhance treatment of cancer cells through enhanced and more controlled thermal deposition, increased tumor injury, and diminished heat shock protein (HSP) expression. We also explored the potential promise of MWNTs as drug delivery agents by observing the degree of intracellular uptake of these nanoparticles. To determine the heat generation capability of MWNTs, the absorption spectra and temperature rise during heating were measured. Higher optical absorption was observed for MWNTs in water compared with water alone. For identical laser parameters, MWNT-containing samples produced a significantly greater temperature elevation compared to samples treated with laser alone. Human prostate cancer (PC3) and murine renal carcinoma (RENCA) cells were irradiated with a 1,064-nm laser with an irradiance of 15.3 W/cm(2) for 2 heating durations (1.5 and 5 minutes) alone or in combination with MWNT inclusion. Cytotoxicity and HSP expression following laser heating was used to determine the efficacy of laser treatment alone or in combination with MWNTs. No toxicity was observed for MWNTs alone. Inclusion of MWNTs dramatically decreased cell viability and HSP expression when combined with laser irradiation. MWNT cell internalization was measured using fluorescence and transmission electron microscopy following incubation of MWNTs with cells. With increasing incubation duration, a greater number of MWNTs were observed in cellular vacuoles and nuclei. These findings offer an initial proof of concept for the application of MWNTs in cancer therapy.

Role of HSP70 in cellular thermotolerance

BACKGROUND AND OBJECTIVE

Thermal pretreatment has been shown to condition tissue to a more severe secondary heat stress. In this research we examined the particular contribution of heat shock protein 70 (HSP70) in thermal preconditioning.

STUDY DESIGN/MATERIALS AND METHODS

For optimization of preshock exposures, a bioluminescent Hsp70-luciferase reporter system in NIH3T3 cells tracked the activation of the Hsp70 gene. Cells in 96-well plates were pretreated in a 43 degrees C water bath for 30 minutes, followed 4 hours later with a severe heat shock at 45 degrees C for 50 minutes. Bioluminescence was measured at 2, 4, 6, 8, and 10 hours after preshock only (PS) and at 4 hours after preshock with heatshock (PS+HS). Viability was assessed 48 hours later with a fluorescent viability dye. Preshock induced thermotolerance was then evaluated in hsp70-containing Murine Embryo Fibroblast (+/+) cells and Hsp70-deficient MEF cells (-/-) through an Arrhenius damage model across varying temperatures (44.5-46 degrees C).

RESULTS

A time gap of 4 hours between preconditioning and the thermal insult was shown to be the most effective for thermotolerance with statistical confidence of P<0.05. The benefit of preshocking was largely abrogated in Hsp70-deficient cells. The Arrhenius data showed that preshocking leads to increases in the activation energies, E(a), and increases in frequency factors, A. The frequency factor increase was significantly greater in Hsp70-deficient cells.

CONCLUSION

The data shows that HSP70 contributes significantly to cellular thermotolerance but there are other pathways that provide residual thermotolerance in cells deficient in Hsp70.

A two-state cell damage model under hyperthermic conditions: theory and in vitro experiments

The ultimate goal of cancer treatment utilizing thermotherapy is to eradicate tumors and minimize damage to surrounding host tissues. To achieve this goal, it is important to develop an accurate cell damage model to characterize the population of cell death under various thermal conditions. The traditional Arrhenius model is often used to characterize the damaged cell population under the assumption that the rate of cell damage is proportional to exp(-EaRT), where Ea is the activation energy, R is the universal gas constant, and T is the absolute temperature. However, this model is unable to capture transition phenomena over the entire hyperthermia and ablation temperature range, particularly during the initial stage of heating. Inspired by classical statistical thermodynamic principles, we propose a general two-state model to characterize the entire cell population with two distinct and measurable subpopulations of cells, in which each cell is in one of the two microstates, viable (live) and damaged (dead), respectively. The resulting cell viability can be expressed as C(tau,T)=exp(-Phi(tau,T)kT)(1+exp(-Phi(tau,T)kT)), where k is a constant. The in vitro cell viability experiments revealed that the function Phi(tau,T) can be defined as a function that is linear in exposure time tau when the temperature T is fixed, and linear as well in terms of the reciprocal of temperature T when the variable tau is held as constant. To determine parameters in the function Phi(tau,T), we use in vitro cell viability data from the experiments conducted with human prostate cancerous (PC3) and normal (RWPE-1) cells exposed to thermotherapeutic protocols to correlate with the proposed cell damage model. Very good agreement between experimental data and the derived damage model is obtained. In addition, the new two-state model has the advantage that is less sensitive and more robust due to its well behaved model parameters.

Molecular imaging-assisted optimization of hsp70 expression during laser-induced thermal preconditioning for wound repair enhancement

Patients at risk for impaired healing may benefit from prophylactic measures aimed at improving wound repair. Several photonic devices claim to enhance repair by thermal and photochemical mechanisms. We hypothesized that laser-induced thermal preconditioning would enhance surgical wound healing that was correlated with hsp70 expression. Using a pulsed diode laser (lambda=1.85 microm, tau(p)=2 ms, 50 Hz, H=7.64 mJ cm(-2)), the skin of transgenic mice that contain an hsp70 promoter-driven luciferase was preconditioned 12 hours before surgical incisions were made. Laser protocols were optimized in vitro and in vivo using temperature, blood flow, and hsp70-mediated bioluminescence measurements as benchmarks. Biomechanical properties and histological parameters of wound healing were evaluated for up to 14 days. Bioluminescent imaging studies indicated that an optimized laser protocol increased hsp70 expression by 10-fold. Under these conditions, laser-preconditioned incisions were two times stronger than control wounds. Our data suggest that this molecular imaging approach provides a quantitative method for optimization of tissue preconditioning and that mild laser-induced heat shock may be a useful therapeutic intervention prior to surgery.

Development of a method of measuring cellular stress in cattle and sheep

In the current studies, flow cytometric methods were used to demonstrate that heat shock protein (hsp) 70 is constitutively expressed in ovine and bovine leukocytes but that the level of expression varies considerably between different leukocyte types and between species. We also show that expression of hsp70 is upregulated in response to an in vitro heat shock treatment. The optimal temperature for heat shock of leukocytes from sheep and cattle is 43.5 degrees C. In sheep and cattle, the relative susceptibility of leukocyte type to upregulation of hsp70 expression, as assayed as percent positive cells, by in vitro heat shock was cell type specific. Best results were obtained from fresh samples; after storage at room temperature for 24h upregulation was highly variable between animals and less than in fresh samples. These studies demonstrate that evaluation of leukocyte hsp70 expression by flow cytometry is a robust, reproducible method for use in the evaluation of cellular stress responses in cattle and sheep. The application of the methods described may be a valuable tool in assessing in vivo stress responses in livestock species.

HSP70 kinetics study by continuous observation of HSP-GFP fusion protein expression on a perfusion heating stage

The direct correlation between levels of heat shock protein expression and efficiency of its tissue protection function motivates this study of how thermal doses can be used for an optimal stress protocol design. Heat shock protein 70 (HSP70) expression kinetics were visualized continuously in cultured bovine aortic endothelial cells (BAECs) on a microscope heating stage using green fluorescent protein (GFP) as a reporter. BAECs were transfected with a DNA vector, HSP(p)-HSP70-GFP which expresses an HSP70-GFP fusion protein under control of the HSP70 promoter. Expression levels were validated by western blot analysis. Transfected cells were heated on a controlled temperature microscope stage at 42 degrees C for a defined period, then shifted to 37 degrees C for varied post-heating times. The expression of HSP70-GFP and its sub-cellular localization were visualized via fluorescence microscopy. The progressive expression kinetics were measured by quantitative analysis of serial fluorescence images captured during heating protocols from 1 to 2 h and post-heating times from 0 to 20 h. The results show two sequential peaks in HSP70 expression at approximately 3 and 12 h post-heat shock. A progressive translocation of HSP70 from the cytoplasm to the nucleus was observed from 6 to 16 h. We conclude that we have successfully combined molecular cloning and optical imaging to study HSP70 expression kinetics. The kinetic profile for HSP70-GFP fusion protein is consistent with the endogenous HSP70. Furthermore, information on dynamic intracellular translocation of HSP70 was extracted from the same experimental data.

Fabrication and in vitro deployment of a laser-activated shape memory polymer vascular stent

Background

Vascular stents are small tubular scaffolds used in the treatment of arterial stenosis (narrowing of the vessel). Most vascular stents are metallic and are deployed either by balloon expansion or by self-expansion. A shape memory polymer (SMP) stent may enhance flexibility, compliance, and drug elution compared to its current metallic counterparts. The purpose of this study was to describe the fabrication of a laser-activated SMP stent and demonstrate photothermal expansion of the stent in an in vitro artery model.

Methods

A novel SMP stent was fabricated from thermoplastic polyurethane. A solid SMP tube formed by dip coating a stainless steel pin was laser-etched to create the mesh pattern of the finished stent. The stent was crimped over a fiber-optic cylindrical light diffuser coupled to an infrared diode laser. Photothermal actuation of the stent was performed in a water-filled mock artery.

Results

At a physiological flow rate, the stent did not fully expand at the maximum laser power (8.6 W) due to convective cooling. However, under zero flow, simulating the technique of endovascular flow occlusion, complete laser actuation was achieved in the mock artery at a laser power of ~8 W.

Conclusion

We have shown the design and fabrication of an SMP stent and a means of light delivery for photothermal actuation. Though further studies are required to optimize the device and assess thermal tissue damage, photothermal actuation of the SMP stent was demonstrated.

Inhibition of the ubiquitin-proteasome system induces stress granule formation

The inhibition of the ubiquitin-dependent proteasome system (UPS) via specific drugs is one type of approach used to combat cancer. Although it has been suggested that UPS inhibition prevents the rapid decay of AU-rich element (ARE)-containing messages, very little is known about the cellular mechanisms leading to this effect. Here we establish a link between the inhibition of UPS activity, the formation of cytoplasmic stress granules (SGs), and mRNA metabolism. The assembly of the SGs requires the phosphorylation of the translation initiation factor eIF2alpha by a mechanism involving the stress kinase GCN2. On prolonged UPS inhibition and despite the maintenance of eIF2alpha phosphorylation, SGs disassemble and translation recovers in an Hsp72 protein-dependent manner. The formation of these SGs coincides with the disassembly of processing bodies (PBs), known as mRNA decay entities. As soon as the SGs assemble, they recruit ARE-containing messages such as p21(cip1) mRNA, which are stabilized under these conditions. Hence, our findings suggest that SGs could be considered as one of the players that mediate the early response of the cell to proteasome inhibitors by interfering temporarily with mRNA decay pathways.

Thermally induced injury and heat-shock protein expression in cells and tissues

Heat-shock proteins (HSPs) are critical components of a cell's defense mechanism against injury associated with adverse stresses. Initiating insults, such as elevated or depressed temperature, diminished oxygen, and pressure, increase HSP expression and can protect cells against subsequent, otherwise lethal, insults. Although HSPs are very beneficial to the normal cell, cancer cells can also use HSPs in response to stresses associated with various therapies (hyperthermia, chemotherapy, radiation), mitigating injury incurred by these treatments. Hyperthermia is a common treatment option for prostate cancer. HSPs can be induced in regions of the tumor where temperatures are insufficient to cause lethal thermal necrosis. Elevated HSP expression can enhance tumor cell viability and impart increased resistance to subsequent chemotherapy and radiation treatments, thereby promoting tumor recurrence. An understanding of the structure, function, and thermally stimulated HSP kinetics and cell injury for prostate cancer cells is essential to designing effective hyperthermia protocols. Measured thermally induced cellular HSP expression and injury data can be employed to develop a treatment planning model for optimization of the tissue response to therapy based on accurate prediction of the HSP expression and cell damage distribution.

STRESS PROTEIN EXPRESSION KINETICS

In all organisms there is an elevated synthesis of a select family of "stress proteins" in response to a broad array of environmentally driven stress vectors including elevated or depressed temperature, changes in pH, treatment with many classes of chemicals, ischemia, desiccation, and UV irradiation. The presence of stress proteins, often termed heat shock proteins (HSPs), has been recognized for more than four decades, and there is an extensive literature that addresses the structure and properties of HSPs, their function in normal and injured cells and tissues, and the molecular mechanisms of HSP expression in response to stress. Owing to this substantial aggregate of research, there is a growing appreciation of the potential for manipulating the magnitude and timing of elevated HSP expression to achieve targeted therapeutic objectives. The successful realization of this potential requires an understanding of the kinetics of the HSP expression process in response to sublethal stress regimens along with the ability to model the governing events in the process to design practical protocols that could be applied in therapeutic settings. Significant progress has been made in recent years in defining and developing capabilities in these two areas.

Optimizing heat shock protein expression induced by prostate cancer laser therapy through predictive computational models

Thermal therapy efficacy can be diminished due to heat shock protein (HSP) induction in regions of a tumor where temperatures are insufficient to coagulate proteins. HSP expression enhances tumor cell viability and imparts resistance to chemotherapy and radiation treatments, which are generally employed in conjunction with hyperthermia. Therefore, an understanding of the thermally induced HSP expression within the targeted tumor must be incorporated into the treatment plan to optimize the thermal dose delivery and permit prediction of the overall tissue response. A treatment planning computational model capable of predicting the temperature, HSP27 and HSP70 expression, and damage fraction distributions associated with laser heating in healthy prostate tissue and tumors is presented. Measured thermally induced HSP27 and HSP70 expression kinetics and injury data for normal and cancerous prostate cells and prostate tumors are employed to create the first HSP expression predictive model and formulate an Arrhenius damage model. The correlation coefficients between measured and model predicted temperature, HSP27, and HSP70 were 0.98, 0.99, and 0.99, respectively, confirming the accuracy of the model. Utilization of the treatment planning model in the design of prostate cancer thermal therapies can enable optimization of the treatment outcome by controlling HSP expression and injury.