Emerging polymeric material strategies for cartilage repair

Cartilage is found throughout the body, serving an array of essential functions. Owing to the limited healing capacity of cartilage, damage or degeneration is often permanent and so requires clinical intervention. Established surgical techniques generally rely on biological grafting. However, recent advances in polymeric materials provide an encouraging alternative to overcome limits of auto- and allografts. For regenerative engineering of cartilage, a polymeric scaffold ideally supports and instructs tissue regeneration while also providing mechanical integrity. Scaffolds direct regeneration via chemical and mechanical cues, as well as delivery and support of exogenous cells and bioactive factors. Advanced polymeric scaffolds aim to direct regeneration locally, replicating the heterogeneities of native tissues. Alternatively, new cartilage-mimetic hydrogels have potential to serve as synthetic cartilage replacements. Prepared as multi-network or composite hydrogels, the most promising candidates have simultaneously realized the hydration, mechanical, and tribological properties of native cartilage. Collectively, the recent rise in polymers for cartilage regeneration and replacement proposes a changing paradigm, with a new generation of materials paving the way for improved clinical outcomes.

Ultra-High Modulus Hydrogels Mimicking Cartilage of the Human Body

The human body is comprised of numerous types of cartilage with a range of high moduli, despite their high hydration. Owing to the limitations of cartilage tissue healing and biological grafting procedures, synthetic replacements have emerged but are limited by poorly matched moduli. While conventional hydrogels can achieve similar hydration to cartilage tissues, their moduli are substantially inferior. Herein, triple network (TN) hydrogels are prepared to synergistically leverage intra-network electrostatic repulsive and hydrophobic interactions, as well as inter-network electrostatic attractive interactions. They are comprised of an anionic 1^st network, a neutral 2^nd network (capable of hydrophobic associations), and a cationic 3^rd network. Collectively, these interactions act synergistically as effective, yet dynamic crosslinks. By tuning the concentration of the cationic 3^rd network, these TN hydrogels achieve high moduli of ≈1.5 to ≈3.5 MPa without diminishing cartilage-like water contents (≈80%), strengths, or toughness values. This unprecedented combination of properties poises these TN hydrogels as cartilage substitutes in applications spanning articulating joints, intervertebral discs (IVDs), trachea, and temporomandibular joint disc (TMJ).

Electrical Stimulation-Mediated Tissue Healing in Porcine Intervertebral Disc Under Mechanically Dynamic Organ Culture Conditions

STUDY DESIGN

Porcine intervertebral discs (IVDs) were excised and then drilled to simulate degeneration before being electrically stimulated for 21 days while undergoing mechanical loading. The discs were then analyzed for gene expression and morphology to assess regeneration.

OBJECTIVE

The purpose of this study was to investigate the effectiveness of the electrical stimulation of IVD treatment as an early intervention method in halting the progression of degenerative disc disease using an ex-vivo porcine model.

SUMMARY OF BACKGROUND DATA

Treatments for degenerative disc disease are limited in their efficacy and tend to treat the symptoms of the disease rather than repairing the degenerated disc itself. There is a dire need for an early intervention treatment that not only halts the progression of the disease but contributes to reviving the degenerated disc.

METHODS

Lumbar IVDs were extracted from a mature pig within 1 hour of death and were drilled with a 1.5 mm bit to simulate degenerative disc disease. Four IVDs at a time were then cultured in a dynamic bioreactor system under mechanical loading for 21 days, two with and two without the electrical stimulation treatment. The IVDs were assessed using histological analysis, magnetic resonance imaging, and quantitative reverse transcriptase polymerase chain reaction to quantify the effectiveness of the treatment on the degenerated discs.

RESULTS

IVDs with electrical stimulation treatment exhibited extensive annular regeneration and prevented herniation of the nucleus pulposus (NP). In contrast, the untreated group of IVDs were unable to maintain tissue integrity and exhibited NP herniation through multiple layers of the annulus fibrosus. Gene expression showed an increase of extracellular matrix markers and antiinflammatory cytokine interleukin-4 (IL-4), while decreasing in pro-inflammatory markers and pain markers in electrically stimulated IVDs when compared to the untreated group.

CONCLUSION

The direct electrical stimulation application in NP of damaged IVDs can be a viable option to regenerate damaged NP and annulus fibrosus tissues.

Modeling of human intervertebral disc annulus fibrosus with complex multi-fiber networks

Collagen fibers within the annulus fibrosus (AF) lamellae are unidirectionally aligned with alternating orientations between adjacent layers. AF constitutive models often combine two adjacent lamellae into a single equivalent layer containing two fiber networks with a crisscross pattern. Additionally, AF models overlook the inter-lamellar matrix (ILM) as well as elastic fiber networks in between lamellae. We developed a nonhomogenous micromechanical model as well as two coarser homogenous hyperelastic and microplane models of the human AF, and compared their performances against measurements (tissue level uniaxial and biaxial tests as well as whole disc experiments) and seven published hyperelastic models. The micromechanical model had a realistic non-homogenous distribution of collagen fiber networks within each lamella and elastic fiber network in the ILM. For small matrix linear moduli (<0.2 MPa), the ILM showed substantial anisotropy (>10%) due to the elastic fiber network. However, at moduli >0.2 MPa, the effects of the elastic fiber network on differences in stress-strain responses at different directions disappeared (<10%). Variations in sample geometry and boundary conditions (due to uncertainty) markedly affected stress-strain responses of the tissue in uniaxial and biaxial tests (up to 16 times). In tissue level tests, therefore, simulations should represent testing conditions (e.g., boundary conditions, specimen geometry, preloads) as closely as possible. Stress/strain fields estimated from the single equivalent layer approach (conventional method) yielded different results from those predicted by the anatomically more accurate apparoach (i.e., layerwise). In addition, in a disc under a compressive force (symmetric loading), asymmetric stress-strain distributions were computed when using a layerwise simulation. Although all developed and selected published AF models predicted gross compression-displacement responses of the whole disc within the range of measured data, some showed excessively stiff or compliant responses under tissue-level uniaxial/biaxial tests. This study emphasizes, when constructing and validating constitutive models of AF, the importance of the proper simulation of individual lamellae as distinct layers, and testing parameters (sample geometric dimensions/loading/boundary conditions).

Design and Fabrication of a Drop Tower Testing Apparatus to Investigate the Impact Behavior of Spinal Motion Segments

Background

The vertebral column is the second most common fracture site in individuals with high-grade osteoporosis (30-50%). Most of these fractures are caused by falls. This information reveals the importance of considering impact loading conditions of spinal motion segments, while no commercial apparatus is available for this purpose. Therefore, the goal was set to fabricate an impact testing device for the measurement of impact behavior of the biological tissues.

Methods

In the present study, first, a drop-weight impact testing apparatus was designed and fabricated to record both force and displacement at a sample rate of 100 kHz. A load cell was placed under the sample, and an accelerometer was located on the impactor. Previous devices have mostly measured the force and not the deformation. Thereafter, the effect of high axial compression load was investigated on a biological sample, i.e., the lumbar motion segment, was investigated. To this end, nine ovine segments subjected to vertical impact load were examined using the fabricated device, and the mechanical properties of the lumbar segments were extracted and later compared with quasi-static loading results.

Results

The results indicated that the specimen stiffness and failure energy in impact loading were higher than those in the quasi-static loading. In terms of the damage site, fracture mainly occurred in the body of the vertebra during impact loading; although, during quasi-static loading, the fracture took place in the endplates.

Conclusion

The present study introduces an inexpensive drop-test device capable of recording both the force and the deformation of the biological specimens when subjected to high-speed impacts. The mechanical properties of the spinal segments have also been extracted and compared with quasi-static loading results.

Submarining sensitivity across varied seat configurations in autonomous driving system environment

OBJECTIVE

Self-driving technology will bring novelty in vehicle interior design and allow for a wide variety of occupant seating choices. Thus, vehicle safety systems may be challenged to protect occupants over a wider range of potential postures. This study aims to investigate the effects of the seat cushion angle on submarining risk, lumbar spine loads and pelvis excursion for reclined occupants in frontal crashes.

METHODS

Frontal crash finite element simulations were performed with two of the simplified Global Human Body Model Consortium (GHBMC) occupant models: the small female and the midsize male. Occupant restraints consisted of a frontal airbag, a seatback-integrated 3-point belt with a lap belt anchor pre-tensioner, and a retractor pre-tensioner with a force limiter. For each simulation, parameters including seat cushion angle (3°, 8°, 13°), seatback recline angle (0°, 10°, 20°, 30°), and knee bolster (KB) position relative to the occupant (baseline and no KB) were varied. A full-factorial simulation matrix was performed using the USNCAP 56 km/h frontal crash pulse. Occupant kinematics data were extracted from each simulation to investigate how changes in seat cushion angle, anthropometry, seatback angle, and KB position would affect submarining across all simulated cases.

RESULTS

Overall, the F05-OS female model was more likely to submarine when compared to the male occupant model. The threshold for submarining was also affected by the seat cushion angle, seatback angle and KB distance. For the F05-OS model, increasing the seat cushion angle to 13° prevented submarining in the 10° seatback angle case, regardless of the KB position. Similarly, the 13° cushion angle prevented submarining for the M50-OS in the 30° seatback angle configuration but only in the presence of a KB. The results further show an increased lumbar flexion load with increased seat recline angle, as well as occupant-to-KB distance, although an opposite trend with the increased seat cushion angle.

CONCLUSIONS

Submarining may be a major challenge to overcome for reclined occupants in autonomous driving systems. This study shows that seat cushion angle plays a role in restraining occupants in recline scenarios, but it is not sufficient to prevent submarining without additional countermeasures.

Development of a multiscale model of the human lumbar spine for investigation of tissue loads in people with and without a transtibial amputation during sit-to-stand

Quantification of lumbar spine load transfer is important for understanding low back pain, especially among persons with a lower limb amputation. Computational modeling provides a helpful solution for obtaining estimates of in vivo loads. A multiscale model was constructed by combining musculoskeletal and finite element (FE) models of the lumbar spine to determine tissue loading during daily activities. Three-dimensional kinematic and ground reaction force data were collected from participants with ([Formula: see text]) and without ([Formula: see text]) a unilateral transtibial amputation (TTA) during 5 sit-to-stand trials. We estimated tissue-level load transfer from the multiscale model by controlling the FE model with intervertebral kinematics and muscle forces predicted by the musculoskeletal model. Annulus fibrosis stress, intradiscal pressure (IDP), and facet contact forces were calculated using the FE model. Differences in whole-body kinematics, muscle forces, and tissue-level loads were found between participant groups. Notably, participants with TTA had greater axial rotation toward their intact limb ([Formula: see text]), greater abdominal muscle activity ([Formula: see text]), and greater overall tissue loading throughout sit-to-stand ([Formula: see text]) compared to able-bodied participants. Both normalized (to upright standing) and absolute estimates of L4-L5 IDP were close to in vivo values reported in the literature. The multiscale model can be used to estimate the distribution of loads within different lumbar spine tissue structures and can be adapted for use with different activities, populations, and spinal geometries.

Assessment of lumbar spinal disc injury in frontal crashes

Frontal vehicle crashes have been a leading cause of spinal injuries in recent years. Reconstruction of frontal crashes using computational models and spinal load analysis helps us understand the patterns of injury and load propagation during frontal crashes. By reconstructing a real crash test and using a viscoelastic crash dummy model, spinal injury patterns were analyzed. The results indicated that a moderate crash with an impact speed of 56 km/h leads to injuries in L1-L2 and L5-S1 levels (L for lumbar and S for sacral vertebrae). The largest spinal loads and injuries were mainly observed immediately after the airbag deployment when the peak of the crash acceleration transpires. Also, the effects of impulse magnitude on the spinal loads and head injury criterion (HIC) showed that HIC is more sensitive than compressive forces to the magnitude of impulse. Moreover, the effects of disc preconditioning as a major factor in the risk of injury was evaluated. The results demonstrate that as the lumbar spine is subjected to a longer preloading, it will be more vulnerable to injury; preconditioning of the discs more adversely affected the risk of injury than a 10% increase in the crash impulse. Overall the results highlight the importance of spinal injury prevention in frontal crashes.

Creep experimental study on the lumbar intervertebral disk under vibration compression load

The intervertebral disk cushions the load generated by human activity and absorbs energy to keep the spine moving steadily. Vibration condition is one of the important causes of disk degeneration. Creep experiments using the sheep lumbar intervertebral disk were carried out under vibration compression. Regularities of the strain of the disk with time were obtained and compared with those of static load. The influence of vibration frequency and time on the creep properties of the intervertebral disk was analyzed. An intervertebral disk three-parameter solid creep constitutive model considering vibration factors was established and the parameters in the model were identified. The results show that the strain of the lumbar intervertebral disk exhibits an exponential relationship with time and is unrelated to static compression or vibration load. Under the same vibration amplitude, the creep increases with vibration frequency and the relationship between them is nonlinear. The vibration frequency has a significant effect on the strain. The creep rate decreases gradually with time and is obviously influenced by vibration frequency at low vibration amplitudes. The creep prediction results obtained using the constitutive model with the time-varying material parameters are in good agreement with the experimental results. The two elastic moduli in the model decrease with time and the viscosity coefficient increases with time.

Modic changes-Their associations with low back pain and activity limitation: A systematic literature review and meta-analysis

BACKGROUND

Previous systematic reviews have reported positive associations between Modic changes (MCs) and low back pain (LBP), but due to their narrow scope and new primary studies, there is a need for a comprehensive systematic review. Our objectives were to investigate if MCs are associated with non-specific LBP and/or activity limitation and if such associations are modified by other factors.

METHODS

A protocol for this review was registered at PROSPERO prior to commencing the work (PROSPERO record: CRD42015017350). The MEDLINE, CINAHL and EMBASE databases were searched for relevant studies from first record to June 15th 2016. Prospective or retrospective cross-sectional cohort studies and case-control studies including people of all ages from general, working and clinical study populations were eligible for inclusion. Risk of bias assessment and data extraction for associations and potential modifiers were completed independently by pairs of reviewers. Meta-analysis was performed for homogeneous studies and presented as odds ratios (OR) with 95% CI.

RESULTS

In all, 5210 citations were identified and 31 studies were included. One study had low risk of bias. Fifteen studies (48%) reported statistically significant positive associations between MCs and LBP and one study found a statistically significant negative association. Meta-analysis performed for studies using concordant pain with provocative discography as the clinical outcome resulted in an OR of 4.01 (1.52-10.61). One of seven studies reported a statistically significant positive association between MCs and activity limitation. Lumbar disc level and disc degeneration were found to modify the association between MCs and LBP.

CONCLUSIONS

The results from this comprehensive systematic review indicate that the associations between MCs and LBP-related outcomes are inconsistent. The high risk of bias and the heterogeneity in terms of study samples, clinical outcomes and prevalence estimates of MCs and LBP may explain these findings. It is likely that new studies with low risk of bias will affect the direction and strength of these associations.

Biomechanics of Lumbar Motion-Segments in Dynamic Compression

Recent epidemiology studies have reported increase in lumbar spine injuries in frontal crashes. Whole human body finite element models (FEHBM) are frequently used to delineate mechanisms of such injuries. However, the accuracy of these models in mimicking the response of human spine relies on the characterization data of the spine model. The current study set out to generate characterization data that can be input to FEHBM lumbar spine, to obtain biofidelic responses from the models. Twenty-five lumbar functional spinal units were tested under compressive loading. A hydraulic testing machine was used to load the superior ends of the specimens. A 75N load was placed on the superior PMMA to remove the laxity in the joint and mimic the physiological load. There were three loading sequences, namely, preconditioning, 0.5 m/s (non-injurious) and 1.0 m/s (failure). Forces and displacements were collected using six-axis load cell and VICON targets. In addition, acoustic signals were collected to identify the times of failures. Finally, response corridors were generated for the two speeds. To demonstrate the corridors, GHBMC FE model was simulated in frontal impact condition with the default and updated lumbar stiffness. Bi-linear trend was observed in the force versus displacement plots. In the 0.5 m/s tests, mean toe- and linear-region stiffnesses were 0.96±0.37 and 2.44±0.92 kN/mm. In 1.0 m/s tests, the toe and linear-region stiffnesses were 1.13±0.56 and 4.6±2.5 kN/mm. Lumbar joints demonstrated 2.5 times higher stiffness in the linear-region when the loading rate was increased by 0.5 m/s.

Biomechanics of the human intervertebral disc: A review of testing techniques and results

Many experimental testing techniques have been adopted in order to provide an understanding of the biomechanics of the human intervertebral disc (IVD). The aim of this review article is to amalgamate results from these studies to provide readers with an overview of the studies conducted and their contribution to our current understanding of the biomechanics and function of the IVD. The overview is presented in a way that should prove useful to experimentalists and computational modellers. Mechanical properties of whole IVDs can be assessed conveniently by testing 'motion segments' comprising two vertebrae and the intervening IVD and ligaments. Neural arches should be removed if load-sharing between them and the disc is of no interest, and specimens containing more than two vertebrae are required to study 'adjacent level' effects. Mechanisms of injury (including endplate fracture and disc herniation) have been studied by applying complex loading at physiologically-relevant loading rates, whereas mechanical evaluations of surgical prostheses require slower application of standardised loading protocols. Results can be strongly influenced by the testing environment, preconditioning, loading rate, specimen age and degeneration, and spinal level. Component tissues of the disc (anulus fibrosus, nucleus pulposus, and cartilage endplates) have been studied to determine their material properties, but only the anulus has been thoroughly evaluated. Animal discs can be used as a model of human discs where uniform non-degenerate specimens are required, although differences in scale, age, and anatomy can lead to problems in interpretation.

Serum lipid levels are positively correlated with lumbar disc herniation--a retrospective study of 790 Chinese patients

Background

Abnormal serum lipid levels have been shown to be associated with the occurrence of atherosclerosis, but little is known about the relationships of them with the risk of developing intervertebral disc degeneration (IVDD) in Chinese population.

Methods

We performed a case–control study to assess the relationship between serum lipid levels and lumbar disc degeneration. A total of 790 Chinese patients were recruited for this study at the time of hospitalization. We examined fasting serum lipid levels of total cholesterol (TC), triglycerides (TG), low-density lipoprotein cholesterol (LDL-C) and high-density lipoprotein cholesterol (HDL-C). 396 patients (235 men and 161 women; mean age: 41.07 years) underwent surgery for single-level lumbar disc herniation. A control group of 394 patients (225 men and 169 women; mean age: 42.1 years) underwent surgery for wounded lower limbs during the same period. Patients in the control group were collected randomly from among patients who were age- and sex-matched patients with the case group.

Results

Patients with lumbar disc herniation had significantly higher TC and LDL-C serum concentrations (P < 0.001 for both) than controls. Percentage of High-TC, High-TG, High-LDL-C, borderline High-TC and borderline High-LDL-C were significantly higher in the disc herniation group (P = 0.017, P = 0.002, P = 0.039, P =0.002 and P < 0.001, respectively). Ratios of TC/HDL-C and LDL-C/HDL-C were significantly associated with disc herniation (P < 0.001 for both). Logistic regression revealed that patients with higher serum LDL-C levels had a higher risk of disc herniation, in which odds ratio (OR) was 1.462 and confidence interval (CI) was 1.179 ~ 1.813. Moreover, patients with High-TG and borderline High-LDL-C had a higher probability of disc herniation (OR: 2.974, CI: 1.488 ~ 5.945, statistical power: 100 %; OR: 1.626, CI: 1.012 ~ 2.612, statistical power: 61.4 %, respectively). However, hyperlipidaemia did not seem to be associated with the herniated segment of the lumbar intervertebral disc (p = 0.374).

Conclusions

The present study suggests that dyslipidaemia may be associated with a higher risk of developing lumbar disc herniation. Serum lipid levels could be a useful predictor for intervertebral disc degeneration in Chinese population.

Modic changes of the lumbar spine: prevalence, risk factors, and association with disc degeneration and low back pain in a large-scale population-based cohort

BACKGROUND CONTEXT

Modic changes (MC) are bone marrow lesions on magnetic resonance imaging (MRI), suggestive of being associated with low back pain (LBP). Data on determinants of MC and their association with disc degeneration and other spinal phenotypes, as well as that of LBP, rely mostly on small-scale patient populations and remain controversial.

PURPOSE

This study addressed the potential determinants of MC and their association with disc degeneration and LBP among Southern Chinese.

STUDY DESIGN/SETTING

A cross-sectional, population-based study was carried out.

PATIENT SAMPLE

This study consisted of 2,449 Southern Chinese volunteers.

METHODS

Sagittal T2-weighted MRIs of the lumbar spine were assessed for the presence of MC and other spinal phenotypes (eg, disc degeneration, disc displacement, Schmorl nodes) in all individuals. Subjects' demographics, occupation, lifestyle, and clinical profiles were assessed.

RESULTS

The overall prevalence of MC was 5.8% (n=141), which increased with advancing age. Modic changes predominantly occurred at the lowest two lumbar levels (83%). In the multivariate analyses, only the presence of disc displacement and a higher disc degeneration score were associated with MC at the upper lumbar levels (L1/L2-L3/L4) (p<.01). The presence of MC at the lowest two lumbar levels (L4/L5-L5/S1) were associated with age, the presence of Schmorl nodes, disc degeneration or displacement, and historical lumbar injury (p<.01). Subjects who were both smokers and overweight or obese had increased likelihood of MC in the lower spine (OR: 2.18; 95% CI: 1.10-4.30). The presence of MC at the lower lumbar levels were associated with historical LBP (OR: 1.93; 95% CI: 1.05-3.54) and with severity and duration of symptoms (p<.05).

CONCLUSIONS

Based on one of the largest MRI studies to assess lumbar MC, we noted that MC were associated with both disc degeneration and the presence and severity of LBP. Determinants and association of MC with disc degeneration and clinical symptoms in the upper versus the lower lumbar spine were different. Our study further stresses the significance of MC as important imaging phenotypes associated with LBP.

Biological approaches to treating intervertebral disk degeneration: devising stem cell therapies

Intervertebral disk (IVD) degeneration is a common, chronic, and complex degeneration process that frequently leads to back pain and disability, resulting in a major public health issue. In this review we describe biological therapies under preclinical or clinical development with an emphasis on stem cell-based multimodal approaches that target prevention and treatment of IVD degeneration. Systematical review of the basic science and clinical literature was performed to summarize the current status of devising biological approaches to treating IVD degeneration. Since the exact mechanisms underlying IVD degeneration have not yet been fully elucidated and conservative managements appear to be mostly ineffective, current surgical treatment focuses on removal of the pathological disk tissues combined with spinal fusion. The treatment options, however, often produce insufficient efficacy and even serious complications. Therefore, there have been growing demands and endeavors for developing novel regenerative biology-guided strategies for repairing the IVD via delivery of exogenous growth factors, introduction of therapeutic genes, and transplantation of stem cells, or combinatorial therapies. Overall, the data suggest that when applied under a recovery neurobiology principle, multimodal regimens comprising ex vivo engineered stem cell-based disks hold a high potential promise for efficacious clinical translations.

The effect of creep on human lumbar intervertebral disk impact mechanics

The intervertebral disk (IVD) is a highly hydrated tissue, with interstitial fluid making up 80% of the wet weight of the nucleus pulposus (NP), and 70% of the annulus fibrosus (AF). It has often been modeled as a biphasic material, consisting of both a solid and fluid phase. The inherent porosity and osmotic potential of the disk causes an efflux of fluid while under constant load, which leads to a continuous displacement phenomenon known as creep. IVD compressive stiffness increases and NP pressure decreases as a result of creep displacement. Though the effects of creep on disk mechanics have been studied extensively, it has been limited to nonimpact loading conditions. The goal of this study is to better understand the influence of creep and fluid loss on IVD impact mechanics. Twenty-four human lumbar disk samples were divided into six groups according to the length of time they underwent creep (tcreep = 0, 3, 6, 9, 12, 15 h) under a constant compressive load of 400 N. At the end of tcreep, each disk was subjected to a sequence of impact loads of varying durations (timp = 80, 160, 320, 400, 600, 800, 1000 ms). Energy dissipation (ΔE), stiffness in the toe (ktoe) and linear (klin) regions, and neutral zone (NZ) were measured. Analyzing correlations with tcreep, there was a positive correlation with ΔE and NZ, along with a negative correlation with ktoe. There was no strong correlation between tcreep and klin. The data suggest that the IVD mechanical response to impact loading conditions is altered by fluid content and may result in a disk that exhibits less clinical stability and transfers more load to the AF. This could have implications for risk of diskogenic pain as a function of time of day or tissue hydration.

A preliminary association study of fat mass and obesity associated gene polymorphisms and degenerative disc disease in a Chinese Han population

OBJECTIVE

To assess whether polymorphisms of the fat mass and obesity associated gene (FTO) are associated with the presence and severity of degenerative disc disease (DDD) in a Chinese Han population.

METHODS

In this case-control study, patients with DDD and controls matched for age, sex and body mass index were genotyped for six single nucleotide polymorphisms (SNPs) of FTO. Disease severity was measured using the Japanese Orthopaedic Association score. Allelic, genotypic and genotype-phenotype association analyses were performed.

RESULTS

A total of 80 patients with DDD and 80 controls were studied. All six SNPs were in Hardy-Weinberg equilibrium. The frequencies of allele G and genotype G/G of the SNP rs11076008 were significantly associated with DDD after Bonferroni correction. No associations were shown between the SNPs studied and sex or disease severity.

CONCLUSION

The SNP rs11076008 of FTO may play an important role in the development of DDD in a Chinese Han population. The G/G genotype and/or G allele may be a risk factor for DDD. These results suggest that FTO is a DDD predisposition gene and may support a close relationship between obesity and DDD.