IMPACT OF CALCIUM QUANTIFICATIONS ON STENT EXPANSIONS

Severely calcified plaque is of great concern when planning and implementing a stenting intervention. In this work, computational models were developed to investigate the influence of calcium characteristics on stenting outcomes. The commonly used clinical measurements of calcium (i.e., the arc angle, maximum thickness, length, and volume) were varied to estimate stenting outcomes in terms of lumen gain, stent underexpansion, strut malapposition, and stress or strain distributions of the stenotic lesion. Results have shown that stenting outcomes were most sensitive to the arc angle of the calcium. A thick calcium with a large arc angle resulted in poor stenting outcomes, such as severe stent underexpansion, D-shaped lumen, increased strut malapposition, and large stresses or strains in the plaque. This was attributed to the circumferential stretch of the tissue. Specifically, the non-calcium component was stretched significantly more than the calcium. The circumferential stretch ratios of calcium and non-calcium component were approximately 2.35 and 1.44, respectively, regardless of calcium characteristics. In addition, the peak stress or strain within the artery and non-calcium component of the plaque occurred at the area adjacent to calcium edges (i.e., the interface between the calcium and the non-calcium component) coincident with the location of peak malapposition. It is worth noting that the calcium played a protective role for the artery underneath, which was at the expense of the overstretch and stress concentrations in the other portion of the artery.

Fluid-Structure Interaction in Abdominal Aortic Aneurysm: Effect of Modeling Techniques

In this work, the impact of modeling techniques on predicting the mechanical behaviors of abdominal aortic aneurysm (AAA) is systematically investigated. The fluid-structure interaction (FSI) model for simultaneously capturing the transient interaction between blood flow dynamics and wall mechanics was compared with its simplified techniques, that is, computational fluid dynamics (CFD) or computational solid stress (CSS) model. Results demonstrated that CFD exhibited relatively smaller vortexes and tends to overestimate the fluid wall shear stress, compared to FSI. On the contrary, the minimal differences in wall stresses and deformation were observed between FSI and CSS models. Furthermore, it was found that the accuracy of CSS prediction depends on the applied pressure profile for the aneurysm sac. A large pressure drop across AAA usually led to the underestimation of wall stresses and thus the AAA rupture. Moreover, the assumed isotropic AAA wall properties, compared to the anisotropic one, will aggravate the difference between the simplified models with the FSI approach. The present work demonstrated the importance of modeling techniques on predicting the blood flow dynamics and wall mechanics of the AAA, which could guide the selection of appropriate modeling technique for significant clinical implications.

Compliance mismatch and compressive wall stresses drive anomalous remodelling of pulmonary trunks reinforced with Dacron grafts

Synthetic grafts are often satisfactory employed in cardiac and vascular surgery, including expanded poly(ethylene terephthalate) or expanded poly(tetrafluoroethylene). However, accumulating evidences suggest the emergence of worrisome issues concerning the long-term fate of prosthetic grafts as large vessel replacement. Disadvantages related to the use of synthetic grafts can be traced in their inability of mimicking the elasto-mechanical characteristics of the native vascular tissue, local suture overstress leading to several prosthesis-related complications and retrograde deleterious effects on valve competence, cardiac function and perfusion. Motivated by this, in the present work it is analyzed - by means of both elemental biomechanical paradigms and more accurate in silico Finite Element simulations - the physical interaction among aorta, autograft and widely adopted synthetic (Dacron) prostheses utilized in transposition of pulmonary artery, highlighting the crucial role played by somehow unexpected stress fields kindled in the vessel walls and around suture regions, which could be traced as prodromal to the triggering of anomalous remodelling processes and alterations of needed surgical outcomes. Theoretical results are finally compared with histological and surgical data related to a significant experimental animal campaign conducted by performing pulmonary artery transpositions in 30 two-month old growing lambs, followed up during growth for six months. The in vivo observations demonstrate the effectiveness of the proposed biomechanical hypothesis and open the way for possible engineering-guided strategies to support and optimize surgical procedures.

Cell-matrix interaction during strain-dependent remodelling of simulated collagen networks

The importance of tissue remodelling is widely accepted, but the mechanism by which the remodelling process occurs remains poorly understood. At the tissue scale, the concept of tensional homeostasis, in which there exists a target stress for a cell and remodelling functions to move the cell stress towards that target, is an important foundation for much theoretical work. We present here a theoretical model of a cell in parallel with a network to study what factors of the remodelling process help the cell move towards mechanical stability. The cell-network system was deformed and kept at constant stress. Remodelling was modelled by simulating strain-dependent degradation of collagen fibres and four different cases of collagen addition. The model did not lead to complete tensional homeostasis in the range of conditions studied, but it showed how different expressions for deposition and removal of collagen in a fibre network can interact to modulate the cell's ability to shield itself from an imposed stress by remodelling the surroundings. This study also showed how delicate the balance between deposition and removal rates is and how sensitive the remodelling process is to small changes in the remodelling rules.

Stress-shielding, growth and remodeling of pulmonary artery reinforced with copolymer scaffold and transposed into aortic position

Ross operation, i.e., the use of autologous pulmonary artery to replace diseased aortic valve, has been recently at the center of a vivid debate regarding its unjust underuse in the surgical practice. Keystone of the procedure regards the use of an autologous biologically available graft which would preserve the anticoagulative and tissue homeostatic functions normally exerted by the native leaflets and would harmoniously integrate in the vascular system, allowing for progressive somatic growth of aortic structures. With this respect, recently, some of the authors have successfully pioneered a large animal model of transposition of pulmonary artery in systemic pressure load in order to reproduce the clinical scenario in which this procedure might be applied and allow for the development and testing of different devices or techniques to improve the pulmonary autograft (PA) performance, by testing a bioresorbable mesh for PA reinforcement. In the present work, to support and supplement the in vivo animal experimentation, a mathematical model is developed in order to simulate the biomechanical changes in pulmonary artery subjected to systemic pressure load and reinforced with a combination of resorbable and auxetic synthetic materials. The positive biological effects on vessel wall remodeling, the regional somatic growth phenomena and prevention of dilatative degeneration have been analyzed. The theoretical outcomes show that a virtuous biomechanical cooperation between biological and synthetic materials takes place, stress-shielding guiding the physiological arterialization of vessel walls, consequently determining the overall success of the autograft system.