The Impact of an Open-Book Pelvic Ring Injury on Bone Strain: Validation of a Finite Element Model and Analysis Within the Gait Cycle

Development of a biofidelic computational model of human pelvis for predicting biomechanical responses and pelvic fractures

BACKGROUND AND OBJECTIVE

The pelvis, a crucial structure for human locomotion, is susceptible to injuries resulting in significant morbidity and disability. This study aims to introduce and validate a biofidelic computational pelvis model, enhancing our understanding of pelvis injury mechanisms under lateral loading conditions.

METHODS

The Finite Element (FE) pelvic model, representing a mid-sized male, was developed with variable cortical thickness in pelvis bones. Material properties were determined through a synthesis of existing constitutive models, parametric studies, and multiple validations. Comprehensive validation included various tests, such as load-displacement assessments of sacroiliac joints, quasi-static and dynamic lateral compression on the acetabulum, dynamic side impacts on the acetabulum and iliac wing using defleshed pelvis, and lateral impacts by a rigid plate on the full body's pelvis region.

RESULTS

Simulation results demonstrated a reasonable correlation between the pelvis model's overall response and cadaveric testing data. Predicted fracture patterns of the isolated pelvis exhibited fair agreement with experimental results.

CONCLUSIONS

This study introduces a credible computational model, providing valuable biomechanical insights into the pelvis' response under diverse lateral loading conditions and fracture patterns. The work establishes a robust framework for developing and enhancing the biofidelity of pelvis FE models through a multi-level validation approach, stimulating further research in modeling, validation, and experimental studies related to pelvic injuries. The findings are expected to offer critical perspectives for predicting, preventing, and mitigating pelvic injuries from vehicular accidents, contributing to advancements in clinical research on medical treatments for pelvic fractures.

Stress-shielding resistant design of custom pelvic prostheses using lattice-based topology optimization

Endoprosthetic reconstruction of the pelvic bone using 3D-printed, custom-made implants has delivered early load-bearing ability and good functional outcomes in the short term to individuals with pelvic sarcoma. However, excessive stress-shielding and subsequent resorption of peri‑prosthetic bone can imperil the long-term stability of such implants. To evaluate the stress-shielding performance of pelvic prostheses, we developed a sequential modeling scheme using subject-specific finite element models of the pelvic bone-implant complex and personalized neuromusculoskeletal models for pre- and post-surgery walking. A new topology optimization approach is introduced for the stress-shielding resistant (SSR) design of custom pelvic prostheses, which uses 3D-printable porous lattice structures. The SSR optimization was applied to a typical pelvic prosthesis to reconstruct a type II+III bone resection. The stress-shielding performance of the optimized implant based on the SSR approach was compared against the conventional optimization. The volume of the peri‑prosthetic bone predicted to undergo resorption post-surgery decreased from 44 to 18%. This improvement in stress-shielding resistance was achieved without compromising the structural integrity of the prosthesis. The SSR design approach has the potential to improve the long-term stability of custom-made pelvic prostheses.

The risk of tibial eminence avulsion fracture with bi-unicondylar knee arthroplasty : a finite element analysis

AIMS

The aim of this study was to determine the risk of tibial eminence avulsion intraoperatively for bi-unicondylar knee arthroplasty (Bi-UKA), with consideration of the effect of implant positioning, overstuffing, and sex, compared to the risk for isolated medial unicondylar knee arthroplasty (UKA-M) and bicruciate-retaining total knee arthroplasty (BCR-TKA).

METHODS

Two experimentally validated finite element models of tibia were implanted with UKA-M, Bi-UKA, and BCR-TKA. Intraoperative loads were applied through the condyles, anterior cruciate ligament (ACL), medial collateral ligament (MCL), and lateral collateral ligament (LCL), and the risk of fracture (ROF) was evaluated in the spine as the ratio of the 95^th percentile maximum principal elastic strains over the tensile yield strain of proximal tibial bone.

RESULTS

Peak tensile strains occurred on the anterior portion of the medial sagittal cut in all simulations. Lateral translation of the medial implant in Bi-UKA had the largest increase in ROF of any of the implant positions (43%). Overstuffing the joint by 2 mm had a much larger effect, resulting in a six-fold increase in ROF. Bi-UKA had ~10% increased ROF compared to UKA-M for both the male and female models, although the smaller, less dense female model had a 1.4 times greater ROF compared to the male model. Removal of anterior bone akin to BCR-TKA doubled ROF compared to Bi-UKA.

CONCLUSION

Tibial eminence avulsion fracture has a similar risk associated with Bi-UKA to UKA-M. The risk is higher for smaller and less dense tibiae. To minimize risk, it is most important to avoid overstuffing the joint, followed by correctly positioning the medial implant, taking care not to narrow the bone island anteriorly.Cite this article: Bone Joint Res 2022;11(8):575-584.