Investigation of the Aggregation of Aβ Peptide (1-40) in the Presence of κ-Carrageenan-Stabilised Liposomes Loaded with Homotaurine

The kinetics of amyloid aggregation was studied indirectly by monitoring the changes in the polydispersity of mixed dispersion of amyloid β peptide (1-40) and composite liposomes. The liposomes were prepared from the 1,2-dioleoyl-sn-glicero-3-phoshocholine (DOPC) phospholipid and stabilised by the electrostatic adsorption of κ-carrageenan. The produced homotaurine-loaded and unloaded liposomes had a highly negative electrokinetic potential and remarkable stability in phosphate buffer (pH 4 and 7.4). For the first time, the appearance and evolution of the aggregation of Aβ were presented through the variation in the standard percentile readings (D10, D50, and D90) obtained from the particle size distribution analysis. The kinetic experiments indicated the appearance of the first aggregates almost 30 min after mixing the liposomes and peptide solution. It was observed that by adding unloaded liposomes, the size of 90% of the particles in the dispersion (D90) increased. In contrast, the addition of homotaurine-loaded liposomes had almost minimal impact on the size of the fractions of larger particles during the kinetic experiments. Despite the specific bioactivity of homotaurine in the presence of natural cell membranes, this study reported an additional inhibitory effect of the compound on the amyloid peptide aggregation due to the charge effects and 'molecular crowding'.

Impact of Lipid Composition on Vesicle Protein Adsorption: A BSA Case Study

Investigating the interaction between liposomes and proteins is of paramount importance in the development of liposomal formulations with real potential for bench-to-bedside transfer. Upon entering the body, proteins are immediately adsorbed on the liposomal surface, changing the nanovehicles' biological identity, which has a significant impact on their biodistribution and pharmacokinetics and ultimately on their therapeutic effect. Albumin is the most abundant plasma protein and thus usually adsorbs immediately on the liposomal surface. We herein report a comprehensive investigation on the adsorption of model protein bovine serum albumin (BSA) onto liposomal vesicles containing the zwitterionic lipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), in combination with either cholesterol (CHOL) or the cationic lipid 1,2-dioleoyl-3-trimethylammoniumpropane (DOTAP). While many studies regarding protein adsorption on the surface of liposomes with different compositions have been performed, to the best of our knowledge, the differential responses of CHOL and DOTAP upon albumin adsorption on vesicles have not yet been investigated. UV-vis spectroscopy and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) revealed a strong influence of the phospholipid membrane composition on protein adsorption. Hence, it was found that DOTAP-containing vesicles adsorb proteins more robustly but also aggregate in the presence of BSA, as confirmed by DLS and TEM. Separation of liposome-protein complexes from unadsorbed proteins performed by means of centrifugation and size exclusion chromatography (SEC) was also investigated. Our results show that neither method can be regarded as a golden experimental setup to study the protein corona of liposomes. Yet, SEC proved to be more successful in the separation of unbound proteins, although the amount of lipid loss upon liposome elution was higher than expected. In addition, coarse-grained molecular dynamics simulations were employed to ascertain key membrane parameters, such as the membrane thickness and area per lipid. Overall, this study highlights the importance of surface charge and membrane fluidity in influencing the extent of protein adsorption. We hope that our investigation will be a valuable contribution to better understanding protein-vesicle interactions for improved nanocarrier design.

pH-Modulated Nanoarchitectonics for Enhancement of Multivalency-Induced Vesicle Shape Deformation at Receptor-Presenting Lipid Membrane Interfaces

Multivalent ligand-receptor interactions between receptor-presenting lipid membranes and ligand-modified biological and biomimetic nanoparticles influence cellular entry and fusion processes. Environmental pH changes can drive these membrane-related interactions by affecting membrane nanomechanical properties. Quantitatively, however, the corresponding effects on high-curvature, sub-100 nm lipid vesicles are scarcely understood, especially in the multivalent binding context. Herein, we employed the label-free localized surface plasmon resonance (LSPR) sensing technique to track the multivalent attachment kinetics, shape deformation, and surface coverage of biotin ligand-functionalized, zwitterionic lipid vesicles with different ligand densities on a streptavidin receptor-coated supported lipid bilayer under varying pH conditions (4.5, 6, 7.5). Our results demonstrate that more extensive multivalent interactions caused greater vesicle shape deformation across the tested pH conditions, which affected vesicle surface packing as well. Notably, there were also pH-specific differences, i.e., a higher degree of vesicle shape deformation was triggered at a lower multivalent binding energy in pH 4.5 than in pH 6 and 7.5 conditions. These findings support that the nanomechanical properties of high-curvature lipid membranes, especially the membrane bending energy and the corresponding responsiveness to multivalent binding interactions, are sensitive to solution pH, and indicate that multivalency-induced vesicle shape deformation occurs slightly more readily in acidic pH conditions relevant to biological environments.

Entropic repulsion of cholesterol-containing layers counteracts bioadhesion

Control of adhesion is a striking feature of living matter that is of particular interest regarding technological translation^1-3. We discovered that entropic repulsion caused by interfacial orientational fluctuations of cholesterol layers restricts protein adsorption and bacterial adhesion. Moreover, we found that intrinsically adhesive wax ester layers become similarly antibioadhesive when containing small quantities (under 10 wt%) of cholesterol. Wetting, adsorption and adhesion experiments, as well as atomistic simulations, showed that repulsive characteristics depend on the specific molecular structure of cholesterol that encodes a finely balanced fluctuating reorientation at the interface of unconstrained supramolecular assemblies: layers of cholesterol analogues differing only in minute molecular variations showed markedly different interfacial mobility and no antiadhesive effects. Also, orientationally fixed cholesterol layers did not resist bioadhesion. Our insights provide a conceptually new physicochemical perspective on biointerfaces and may guide future material design in regulation of adhesion.

Heterogeneity in Lateral Distribution of Polycations at the Surface of Lipid Membrane: From the Experimental Data to the Theoretical Model

Natural and synthetic polycations of different kinds attract substantial attention due to an increasing number of their applications in the biomedical industry and in pharmacology. The key characteristic determining the effectiveness of the majority of these applications is the number of macromolecules adsorbed on the surface of biological cells or their lipid models. Their study is complicated by a possible heterogeneity of polymer layer adsorbed on the membrane. Experimental methods reflecting the structure of the layer include the electrokinetic measurements in liposome suspension and the boundary potential of planar bilayer lipid membranes (BLM) and lipid monolayers with a mixed composition of lipids and the ionic media. In the review, we systematically analyze the methods of experimental registration and theoretical description of the laterally heterogeneous structures in the polymer layer published in the literature and in our previous studies. In particular, we consider a model based on classical theory of the electrical double layer, used to analyze the available data of the electrokinetic measurements in liposome suspension with polylysines of varying molecular mass. This model suggests a few parameters related to the heterogeneity of the polymer layer and allows determining the conditions for its appearance at the membrane surface. A further development of this theoretical approach is discussed.

Zwitterionic Peptides Reduce Accumulation of Marine and Freshwater Biofilm Formers

Zwitterionic peptides are facile low-fouling compounds for environmental applications as they are biocompatible and fully biodegradable as their degradation products are just amino acids. Here, a set of histidine (H) and glutamic acid (E), as well as lysine (K) and glutamic acid (E) based peptide sequences with zwitterionic properties were synthesized. Both oligopeptides (KE)₄K and (HE)₄H were synthesized in d and l configurations to test their ability to resist the nonspecific adsorption of the proteins lysozyme and fibrinogen. The coatings were additionally tested against the attachment of the marine organisms Navicula perminuta and Cobetia marina as well as the freshwater bacterium Pseudomonas fluorescens on the developed coatings. While the peptides containing lysine performed better in protein resistance assays and against freshwater bacteria, the sequences containing histidine were generally more resistant against marine organisms. The contribution of amino acid-intrinsic properties such as side chain pK_a values and hydrophobicity, as well as external parameters such as pH and salinity of fresh water and seawater on the resistance of the coatings is discussed. In this way, a detailed picture emerges as to which zwitterionic sequences show advantages in future generations of biocompatible, sustainable, and nontoxic fouling release coatings.

Influence of drug/lipid interaction on the entrapment efficiency of isoniazid in liposomes for antitubercular therapy: a multi-faced investigation

Isoniazid (INH) is one of the primary drugs used in tuberculosis treatment and its encapsulation in liposomal vesicles can both improve its therapeutic index and minimize toxicity. Here we consider mixtures of hydrogenated soy phosphatidylcholine-phosphatidylglycerol (HSPC-DPPG) to get novel biocompatible liposomes for INH delivery. We determined INH encapsulation efficiency by coupling for the first time UV and Laser Transmission Spectroscopy and we showed that HSPC-DPPG liposomes can load more INH than expected from simple geometrical arguments, thus suggesting the presence of drug-lipid association. To focus on this aspect, which has never been explored in liposomal formulations, we employed several complementary techniques, such as dynamic and static light scattering, calorimetry and surface pressure measurements on lipid monolayers. We find that INH-lipid interaction increases the entrapment capability of liposomes due to INH adsorption. Moreover, the preferential INH-HSPC dipole-dipole interaction promotes the modification of lipid ordering, favoring the formation of HSPC-richer domains in excess of DPPG. Our findings highlight how investigating the fundamental aspects of drug-lipid interactions is of paramount importance for the optimal design of liposomal nanocarriers.

Charge Effects Provide Ångström-Level Control of Lipid Bilayer Morphology on Titanium Dioxide Surfaces

Interfaces between molecular organic architectures and oxidic substrates are a central feature of biosensors and applications of biomimetics in science and technology. For phospholipid bilayers, the large range of pH- and ionic strength-dependent surface charge densities adopted by titanium dioxide and other oxidic surfaces leads to a rich landscape of phenomena that provides exquisite control of membrane interactions with such substrates. Using neutron reflectometry measurements, we report sharp, reversible transitions that occur between closely surface-associated and weakly coupled states. We show that these states arise from a complex interplay of the tunable length scale of electrostatic interactions with the length scale arising from other forces that are independent of solution conditions. A generalized free energy potential, with its inputs only derived from established measurements of surface and bilayer properties, quantitatively describes these and previously reported observations concerning the unbinding of bilayers from supporting substrates.

The pH-Induced Specific Area Changes of Unsaturated Lipids Deposited onto a Bubble Interface

In this work, we used an original experimental setup to examine the behavior of insoluble monolayers made with pH-sensitive lipids. Two kinds of unsaturated lipids were chosen: a cationic one (lipid 1) bearing an ammonium headgroup and an anionic one (lipid 2) terminated with an acidic phenol group. The lipids were deposited onto an air bubble interface maintained in an aqueous phase and, after stabilization, were subjected to a series of compressions performed at different pH values. These experiments disclosed a gradual increase in the specific area per molecule when lipids were neutralized. Imposing a pH variation at constant bubble volume also provided surface pressure profiles that confirmed this molecular behavior. As complementary characterization, dilatational rheology disclosed a phase transition from a purely elastic monophasic system to a viscoelastic two-phase system. We hypothesized that this unexpected increase in the specific area with lipid neutralization is related to the presence of unsaturations in each of the two branches of the hydrophobic tails that induce disorder, thereby increasing the molecular area at the interface. Application of the two-dimensional Volmer equation of state allowed the generation of quantitative values for the specific areas that showed variations with pH. It also allowed the determination of apparent pK_a values, which are affected by both the electrostatic potential within the monolayer and the affinity of the lipid polar head for the aqueous phase.

Influence of Sensor Coating and Topography on Protein and Nanoparticle Interaction with Supported Lipid Bilayers

Supported lipid bilayers (SLBs) have proven to be valuable model systems for studying the interactions of proteins, peptides, and nanoparticles with biological membranes. The physicochemical properties (e.g., topography, coating) of the solid substrate may affect the formation and properties of supported phospholipid bilayers, and thus, subsequent interactions with biomolecules or nanoparticles. Here, we examine the influence of support coating (SiO₂ vs Si₃N₄) and topography [sensors with embedded vs protruding gold nanodisks for nanoplasmonic sensing (NPS)] on the formation and subsequent interactions of supported phospholipid bilayers with the model protein cytochrome c and with cationic polymer-wrapped quantum dots using quartz crystal microbalance with dissipation monitoring and NPS techniques. The specific protein and nanoparticle were chosen because they differ in the degree to which they penetrate the bilayer. We find that bilayer formation and subsequent non-penetrative association with cytochrome c were not significantly influenced by substrate composition or topography. In contrast, the interactions of nanoparticles with SLBs depended on the substrate composition. The substrate-dependence of nanoparticle adsorption is attributed to the more negative zeta-potential of the bilayers supported by the silica vs the silicon nitride substrate and to the penetration of the cationic polymer wrapping the nanoparticles into the bilayer. Our results indicate that the degree to which nanoscale analytes interact with SLBs may be influenced by the underlying substrate material.

RGD-functionalized supported lipid bilayers modulate pre-osteoblast adherence and promote osteogenic differentiation

Biomaterial integration into bone requires optimal surface conditions to promote osteoprogenitor behavior, which is affected by integrin-binding via arginine-glycine-aspartate (RGD). RGD-functionalized supported lipid bilayers (SLBs) might be interesting as biomaterial coating in bone regeneration, because they allow integration of proteins, for example, growth factors, cytokines, and/or antibacterial agents. Since it is unknown whether and how they affect osteoprogenitor adhesion and differentiation, the aim was to investigate adhesion, focal adhesion formation, morphology, proliferation, and osteogenic potential of pre-osteoblasts cultured on RGD-functionalized SLBs compared to unfunctionalized SLBs and poly-l-lysine (PLL). After 17 hr, pre-osteoblast density on SLBs without or with RGD was similar, but lower than on PLL. Cell surface area, elongation, and number and size of phospho-paxillin clusters were also similar. Cells on SLBs without or with RGD were smaller, more elongated, and had less and smaller phospho-paxillin clusters than on PLL. OPN expression was increased on SLBs with RGD compared to PLL. Moreover, after 1 week, COL1a1 expression was increased on SLBs without or with RGD. In conclusion, pre-osteoblast adhesion and enhanced differentiation were realized for the first time on RGD-functionalized SLBs, pointing to a new horizon in the management of bone regeneration using biomaterials. Together with SLBs nonfouling nature and the possibility of adjusting SLB fluidity and peptide content make SLBs highly promising as substrate to develop innovative biomimetic coatings for biomaterials in bone regeneration.

Response of an actin network in vesicles under electric pulses

We study the role of a biomimetic actin network during the application of electric pulses that induce electroporation or electropermeabilization, using giant unilamellar vesicles (GUVs) as a model system. The actin cortex, a subjacently attached interconnected network of actin filaments, regulates the shape and mechanical properties of the plasma membrane of mammalian cells, and is a major factor influencing the mechanical response of the cell to external physical cues. We demonstrate that the presence of an actin shell inhibits the formation of macropores in the electroporated GUVs. Additionally, experiments on the uptake of dye molecules after electroporation show that the actin network slows down the resealing process of the permeabilized membrane. We further analyze the stability of the actin network inside the GUVs exposed to high electric pulses. We find disruption of the actin layer that is likely due to the electrophoretic forces acting on the actin filaments during the permeabilization of the GUVs. Our findings on the GUVs containing a biomimetic network provide a step towards understanding the discrepancies between the electroporation mechanism of a living cell and its simplified model of the empty GUV.

Quaternary Amine-Terminated Quantum Dots Induce Structural Changes to Supported Lipid Bilayers

The cytoplasmic membrane represents an essential barrier between the cytoplasm and the environment external to cells. Interaction with nanomaterials can alter the integrity of the cytoplasmic membrane through the formation of holes and membrane thinning, which can ultimately lead to adverse biological impacts. Here we use supported lipid bilayers as experimental models for the cytoplasmic membrane to investigate the impact of quantum dots functionalized with the cationic polymer poly(diallyldimethylammonium chloride) (PDDA) on membrane structure. Using a quartz crystal microbalance with dissipation monitoring we show that the positively charged quantum dots attach to and induce structural rearrangement to zwitterionic bilayers in solely the liquid-disordered phase and in those containing phase-segregated liquid-ordered domains. Real-time atomic force microscopy imaging revealed that PDDA-coated quantum dots and, to a lesser extent, PDDA itself induced the disappearance of liquid-ordered domains. We hypothesize this effect is due to an increase in energy per unit area caused by collisions between PDDA-coated quantum dots at the membrane surface. This increase in free energy per area exceeds the approximate free-energy change associated with membrane mixing between the liquid-ordered and liquid-disordered phases and results in the destabilization of membrane domains.

Peripheral Membrane Proteins Facilitate Nanoparticle Binding at Lipid Bilayer Interfaces

Molecular understanding of the impact of nanomaterials on cell membranes is critical for the prediction of effects that span environmental exposures to nanoenabled therapies. Experimental and computational studies employing phospholipid bilayers as model systems for membranes have yielded important insights but lack the biomolecular complexity of actual membranes. Here, we increase model membrane complexity by incorporating the peripheral membrane protein cytochrome c and studying the interactions of the resulting membrane systems with two types of anionic nanoparticles. Experimental and computational studies reveal that the extent of cytochrome c binding to supported lipid bilayers depends on anionic phospholipid number density and headgroup chemistry. Gold nanoparticles functionalized with short, anionic ligands or wrapped with an anionic polymer do not interact with silica-supported bilayers composed solely of phospholipids. Strikingly, when cytochrome c was bound to these bilayers, nanoparticles functionalized with short anionic ligands attached to model biomembranes in amounts proportional to the number of bound cytochrome c molecules. In contrast, anionic polymer-wrapped gold nanoparticles appeared to remove cytochrome c from supported lipid bilayers in a manner inversely proportional to the strength of cytochrome c binding to the bilayer; this reflects the removal of a weakly bound pool of cytochrome c, as suggested by molecular dynamics simulations. These results highlight the importance of the surface chemistry of both the nanoparticle and the membrane in predicting nano-bio interactions.

Phosphatidylcholine Membrane Fusion Is pH-Dependent

Membrane fusion mediates multiple vital processes in cell life. Specialized proteins mediate the fusion process, and a substantial part of their energy is used for topological rearrangement of the membrane lipid matrix. Therefore, the elastic parameters of lipid bilayers are of crucial importance for fusion processes and for determination of the energy barriers that have to be crossed for the process to take place. In the case of fusion of enveloped viruses (e.g., influenza) with endosomal membrane, the interacting membranes are in an acidic environment, which can affect the membrane’s mechanical properties. This factor is often neglected in the analysis of virus-induced membrane fusion. In the present work, we demonstrate that even for membranes composed of zwitterionic lipids, changes of the environmental pH in the physiologically relevant range of 4.0 to 7.5 can affect the rate of the membrane fusion notably. Using a continual model, we demonstrated that the key factor defining the height of the energy barrier is the spontaneous curvature of the lipid monolayer. Changes of this parameter are likely to be caused by rearrangements of the polar part of lipid molecules in response to changes of the pH of the aqueous solution bathing the membrane.

Direct measurement of surface charge distribution in phase separating supported lipid bilayers

The local surface charge density of the cell membrane influences regulation and localization of membrane proteins. The local surface charge density could, until recently, not be measured directly under physiological conditions, and it was largely a hypothetical yet very important parameter. Here we use unsaturated lipids of a distinct charge (DOTAP, DOPC, and DOPG) and a neutral fully saturated lipid (DPPC) to create model membranes with phase separating domains of a defined charge. We then apply quantitative surface charge microscopy (QSCM) to investigate the local surface charge density; this is a technique based on a scanning ion conductance microscope (SICM) capable of measuring surface charge density with nanoscale lateral resolution. We are able to clearly distinguish lipid domains from charge and topography in all three model membranes. The measured surface charge densities furthermore reveal that disordered domains formed by charged lipids are in fact not only impure, but also incorporate uncharged saturated lipids. We estimate that at least 30% of disordered domains in DOPG : DPPC and DOTAP : DPPC will be DPPC. These ratios could present a limit for the formation of charged domains in lipid membranes.

Natural Organic Matter Concentration Impacts the Interaction of Functionalized Diamond Nanoparticles with Model and Actual Bacterial Membranes

Changes to nanoparticle surface charge, colloidal stability, and hydrodynamic properties induced by interaction with natural organic matter (NOM) warrant consideration in assessing the potential for these materials to adversely impact organisms in the environment. Here, we show that acquisition of a coating, or "corona", of NOM alters the hydrodynamic and electrokinetic properties of diamond nanoparticles (DNPs) functionalized with the polycation poly(allylamine HCl) in a manner that depends on the NOM-to-DNP concentration ratio. The NOM-induced changes to DNP properties alter subsequent interactions with model biological membranes and the Gram-negative bacterium Shewanella oneidensis MR-1. Suwannee River NOM induces changes to DNP hydrodynamic diameter and apparent ζ-potential in a concentration-dependent manner. At low NOM-to-DNP ratios, DNPs aggregate to a limited extent but retain a positive ζ-potential apparently due to nonuniform adsorption of NOM molecules leading to attractive electrostatic interactions between oppositely charged regions on adjacent DNP surfaces. Diamond nanoparticles at low NOM-to-DNP ratios attach to model membranes to a larger extent than in the absence of NOM (including those incorporating lipopolysaccharide, a major bacterial outer membrane component) and induce a comparable degree of membrane damage and toxicity to S. oneidensis. At higher NOM-to-DNP ratios, DNP charge is reversed, and DNP aggregates remain stable in suspension. This charge reversal eliminates DNP attachment to model membranes containing the highest LPS contents studied due to electrostatic repulsion and abolishes membrane damage to S. oneidensis. Our results demonstrate that the effects of NOM coronas on nanoparticle properties and interactions with biological surfaces can depend on the relative amounts of NOM and nanoparticles.

Cascading Effects of Nanoparticle Coatings: Surface Functionalization Dictates the Assemblage of Complexed Proteins and Subsequent Interaction with Model Cell Membranes

Interactions of functionalized nanomaterials with biological membranes are expected to be governed by not only nanoparticle physiochemical properties but also coatings or "coronas" of biomacromolecules acquired after immersion in biological fluids. Here we prepared a library of 4-5 nm gold nanoparticles (AuNPs) coated with either ω-functionalized thiols or polyelectrolyte wrappings to examine the influence of surface functional groups on the assemblage of proteins complexing the nanoparticles and its subsequent impact on attachment to model biological membranes. We find that the initial nanoparticle surface coating has a cascading effect on interactions with model cell membranes by determining the assemblage of complexing proteins, which in turn influences subsequent interaction with model biological membranes. Each type of functionalized AuNP investigated formed complexes with a unique ensemble of serum proteins that depended on the initial surface coating of the nanoparticles. Formation of protein-nanoparticle complexes altered the electrokinetic, hydrodynamic, and plasmonic properties of the AuNPs. Complexation of the nanoparticles with proteins reduced the attachment of cationic AuNPs and promoted attachment of anionic AuNPs to supported lipid bilayers; this trend is observed with both lipid bilayers comprising 100% zwitterionic phospholipids and those incorporating anionic phosphatidylinositol. Complexation with serum proteins led to attachment of otherwise noninteracting oligo(ethylene glycol)-functionalized AuNPs to bilayers containing phosphatidylinositol. These results demonstrate the importance of considering both facets of the nano-bio interface: functional groups displayed on the nanoparticle surface and proteins complexing the nanoparticles influence interaction with biological membranes as does the molecular makeup of the membranes themselves.

Analytical approaches to study domain formation in biomimetic membranes

Novel characterization methods open new horizons in the study of membrane mixtures.

Preservation of Supported Lipid Membrane Integrity from Thermal Disruption: Osmotic Effect

Preservation of structural integrity under various environmental conditions is one major concern in the development of the supported lipid membrane (SLM)-based devices. It is common for SLMs to experience temperature shifts from manufacture, processing, storage, and transport to operation. In this work, we studied the thermal adaption of the supported membranes on silica substrates. Homogenous SLMs with little defects were formed through the vesicle fusion method. The mass and fluidity of the bilayers were found to deteriorate from a heating process but not a cooling process. Fluorescence characterizations showed that the membranes initially budded as a result of heating-induced lipid lateral area expansion, followed by the possible fates including maintenance, retraction, and fission, among which the last contributes to the irreversible compromise of the SLM integrity and spontaneous release of the interlipid stress accumulated. Based on the mechanism, we developed a strategy to protect SLMs from thermal disruption by increasing the solute concentration in medium. An improved preservation of the membrane mass and fluidity against the heating process was observed, accompanied by a decrease in the retraction and fission of the buds. Theoretical analysis revealed a high osmotic energy penalty for the fission, which accounts for the depressed disruption. This osmotic-based protection strategy is facile, solute nonspecific, and long-term efficient and has little impact on the original SLM properties. The results may help broaden SLM applications and sustain the robustness of SLM-based devices under multiple thermal conditions.

Influence of Solution Chemistry and Soft Protein Coronas on the Interactions of Silver Nanoparticles with Model Biological Membranes

The influence of solution chemistry and soft protein coronas on the interactions between citrate-coated silver nanoparticles (AgNPs) and model biological membranes was investigated by assembling supported lipid bilayers (SLBs) composed of zwitterionic 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) on silica crystal sensors in a quartz crystal microbalance with dissipation monitoring (QCM-D). Our results show that the deposition rates of AgNPs on unmodified silica surfaces increased with increasing electrolyte concentrations under neutral pH conditions. Similar trends were observed when AgNPs were deposited on SLBs, hence indicating that the deposition of AgNPs on model cell membranes was controlled by electrostatic interactions. In the presence of human serum albumin (HSA) proteins at both pH 7 and pH 2, the colloidal stability of AgNPs was considerably enhanced due to the formation of HSA soft coronas surrounding the nanoparticles. At pH 7, the deposition of AgNPs on SLBs was suppressed in the presence of HSA due to steric repulsion between HSA-modified AgNPs and SLBs. In contrast, pronounced deposition of HSA-modified AgNPs on SLBs was observed at pH 2. This observation was attributed to the reduction of electrostatic repulsion as well as conformation changes of adsorbed HSA under low pH conditions, resulting in the decrease of steric repulsion between AgNPs and SLBs.

Revealing the Nature of Interaction between Graphene Oxide and Lipid Membrane by Surface-Enhanced Infrared Absorption Spectroscopy

Revealing the nature of interaction between graphene oxide (GO) and lipid membrane is a crucial issue but still remains challenging. Here, we describe our recent effort toward this direction by studying the GO-induced vibrational changes of interfacial water and lipid membrane with surface-enhanced infrared absorption (SEIRA) spectroscopy. The experimental results provide evidence that overcoming the electrostatic repulsion of phosphate group, its hydrogen bonding attraction as well as the electrostatic and hydrophobic interaction of choline group are the driving forces for the effective adsorption of GO on lipid membrane. This work will open exciting new avenues to explore the use of SEIRA spectroscopy technique in probing nanobio interface.

Elucidating how bamboo salt interacts with supported lipid membranes: influence of alkalinity on membrane fluidity

Bamboo salt is a traditional medicine produced from sea salt. It is widely used in Oriental medicine and is an alkalizing agent with reported antiinflammatory, antimicrobial and chemotherapeutic properties. Notwithstanding, linking specific molecular mechanisms with these properties has been challenging to establish in biological systems. In part, this issue may be related to bamboo salt eliciting nonspecific effects on components found within these systems. Herein, we investigated the effects of bamboo salt solution on supported lipid bilayers as a model system to characterize the interaction between lipid membranes and bamboo salt. The atomic composition of unprocessed and processed bamboo salts was first analyzed by mass spectrometry, and we identified several elements that have not been previously reported in other bamboo salt preparations. The alkalinity of hydrated samples was also measured and determined to be between pH 10 and 11 for bamboo salts. The effect of processed bamboo salt solutions on the fluidic properties of a supported lipid bilayer on glass was next investigated by fluorescence recovery after photobleaching (FRAP) analysis. It was demonstrated that, with increasing ionic strength of the bamboo salt solution, the fluidity of a lipid bilayer increased. On the contrary, increasing the ionic strength of near-neutral buffer solutions with sodium chloride salt diminished fluidity. To reconcile these two observations, we identified that solution alkalinity is critical for the effects of bamboo salt on membrane fluidity, as confirmed using three additional commercial bamboo salt preparations. Extended-DLVO model calculations support that the effects of bamboo salt on lipid membranes are due to the alkalinity imparting a stronger hydration force. Collectively, the results of this work demonstrate that processing of bamboo salt strongly affects its atomic composition and that the alkalinity of bamboo salt solutions contributes to its effect on membrane fluidity.

Tuning the mobility coupling of quaternized polyvinylpyridine and anionic phospholipids in supported lipid bilayers

Binding of biomacromolecules to anionic lipids in the plasma membrane is a common motif in many cell signaling pathways. Previous work has shown that macromolecules with cationic sequences can form nanodomains with sequestered anionic lipids, which alters the lateral distribution and mobility of the membrane lipids. Such sequestration is believed to result from the formation of a lipid-macromolecule complex. To date, however, the molecular structure and dynamics of the lipid-polymer interface are poorly understood. We have investigated the behavior of polycationic quaternized polyvinylpyridine (QPVP) on supported lipid bilayers doped with phosphatidylserine (PS) or phosphatidylinositol phosphate (PIP) lipids using time-resolved fluorescence microscopy, including pulsed interleaved excitation fluorescence cross-correlation spectroscopy (PIE-FCCS). PIE-FCCS is a dual-color fluorescence spectroscopy that translates fluctuations in fluorescence signal into a measurement of diffusion and colocalization. By labeling the polymer and lipids, we investigated the adsorption-induced translational mobility of lipids and systematically studied the influence of lipid charge density and solution ionic strength. Our results show that alteration of anionic lipid lateral mobility is dependent on the net charge of the lipid headgroup and is modulated by the ionic strength of the solution, indicating that electrostatic interactions drive the decrease in lateral mobility of anionic lipids by adsorbed QPVP. At physiological salt concentration we observe that the lipid lateral mobility is weakly influenced by QPVP and that there is no evidence of stable lipid-polymer complexes.

Interaction of multiwalled carbon nanotubes with supported lipid bilayers and vesicles as model biological membranes

The influence of solution chemistry on the kinetics and reversibility of the deposition of multiwalled carbon nanotubes (MWNTs) on model biological membranes was investigated using a quartz crystal microbalance with dissipation monitoring (QCM-D). Supported lipid bilayers (SLBs) comprised of zwitterionic 1,2-dioleoyl-sn-glyero-3-phosphocholine (DOPC), as well as DOPC vesicles, were used as model cell membranes. Under neutral pH conditions, the deposition kinetics of MWNTs on SLBs increased with increasing electrolyte (NaCl and CaCl2) concentrations. In the presence of NaCl, favorable deposition was not achieved even at a concentration of 1 M, which is attributed to the presence of strong repulsive hydration forces due to the highly hydrophilic headgroups of SLBs. Conversely, favorable deposition was observed at CaCl2 concentrations above 0.5 mM when the charge of SLBs was reversed from negative to positive through the binding of Ca(2+) cations to the exposed phosphate headgroups. Favorable nanotube deposition was also observed at pH 2, at which the DOPC SLBs exhibited positive surface charge, since the isoelectric point of DOPC is ca. 4. When MWNTs on SLBs were rinsed with low ionic strength solutions at pH 7.3, only ca. 20% of deposited nanotubes were released, indicating that nanotube deposition was mostly irreversible. The deposition of MWNTs on DOPC vesicles under favorable deposition conditions did not result in any detectable leakage of solution from the vesicles, indicating that MWNTs did not severely disrupt the DOPC bilayers upon attachment.

Effect of ionic strength on dynamics of supported phosphatidylcholine lipid bilayer revealed by FRAPP and Langmuir-Blodgett transfer ratios

To determine how lipid bilayer/support interactions are affected by ionic strength, we carried out lipid diffusion coefficient measurements by fluorescence recovery after patterned photobleaching (FRAPP) and transfer ratio measurements using a Langmuir balance on supported bilayers of phosphatidylcholine lipids. The main effect of increasing ionic strength is shown to be enhanced diffusion of the lipids due to a decrease in the electrostatic interaction between the bilayer and the support. We experimentally confirm that the two main parameters governing bilayer behavior are electrostatic interaction and bilayer/support distance. Both these parameters can therefore be used to vary the potential that acts on the bilayer. Additionally, our findings show that FRAPP is an extremely sensitive tool to study interaction effects: here, variations in diffusion coefficient as well as the presence or absence of leaflet decoupling.

Biomimetic monolayer and bilayer membranes made from amphiphilic block copolymer micelles

The deposition of amphiphilic poly(ethylene oxide)-block-poly(butadiene) (PEO-b-PBD) copolymer micelles is demonstrated on solid substrates. Depending upon surface chemistry, micelle adsorption creates either monolayer or bilayer films. Lateral diffusion measurements reveal that strong coupling between hydrophilic surfaces and PEO blocks creates immobile bilayers, while monolayers retain the fluidity previously observed in vesicular assemblies.

Fluidity modulation of phospholipid bilayers by electrolyte ions: insights from fluorescence microscopy and microslit electrokinetic experiments

Fluidity and charging of supported bilayer lipid membranes (sBLMs) prepared from 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine (DOPC) were studied by fluorescence recovery after photobleaching (FRAP) and microslit electrokinetic measurements at varying pH and ionic composition of the electrolyte. Measurements in neutral electrolytes (KCl, NaCl) revealed a strong correlation between the membrane fluidity and the membrane charging due to unsymmetrical water ion adsorption (OH(-) ≫ H(3)O(+)). The membrane fluidity significantly decreased below the isoelectric point of 3.9, suggesting a phase transition in the bilayer. The interactions of both chaotropic anions and strongly kosmotropic cations with the zwitterionic lipids were found to be related with nearly unhindered lipid mobility in the acidic pH range. While for the chaotropic anions the observed effect correlates with the increased negative net charge at low pH, no correlation was found between the changes in the membrane fluidity and charge in the presence of kosmotropic cations. We discuss the observed phenomena with respect to the interaction of the electrolyte ions with the lipid headgroup and the influence of this process on the headgroup orientation and hydration as well as on the lipid packaging.

Preparation of supported lipid membranes for aquaporin Z incorporation

There has been a recent surge of interest to mimic the performance of natural cellular membranes by incorporating water channel proteins-aquaporins (AQPs) into various ultrathin films for water filtration applications. To make biomimetic membranes one of the most crucial steps is preparing a defect-free platform for AQPs incorporation on a suitable substrate. In this study two methods were used to prepare supported lipid membranes on NF membrane surfaces under a benign pH condition of 7.8. One method was direct vesicle fusion on a hydrophilic membrane NF-270; the other was vesicle fusion facilitated by hydraulic pressure on a modified hydrophilic NF-270 membrane whose surface has been spin-coated with positively charged lipids. Experiments revealed that the supported lipid membrane without AQPs prepared by the spin coating plus vesicle fusion had a much lower defect density than that prepared by vesicle fusion alone. It appears that the surface roughness and charge are the main factors determining the quality of the supported lipid membrane. Aquaporin Z (AqpZ) proteins were successfully incorporated into 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) liposomes and its permeability was measured by the stopped-flow experimental procedure. However, after the proteoliposomes have been fused onto the modified substrate, the AqpZ function in the resultant membrane was not observed and AFM images showed distinct aggregations of unfused proteoliposomes or AqpZ proteins on the substrate surface. It is speculated that the inhibition of AqpZ function may be caused by the low lipid mobility on the NF membrane surface. Further investigations to evaluate and optimize the structure-performance relationship are required.

Phospholipid-sepiolite biomimetic interfaces for the immobilization of enzymes

Biomimetic interfaces based on phosphatidylcholine (PC) assembled to the natural silicate sepiolite were prepared for the stable immobilization of the urease and cholesterol oxidase enzymes. This is an important issue in practical advanced applications such as biocatalysis or biosensing. The supported lipid bilayer (BL-PC), prepared from PC adsorption, was used for immobilization of enzymes and the resulting biomimetic systems were compared to several other supported layers including a lipid monolayer (ML-PC), a mixed phosphatidylcholine/octyl-galactoside layer (PC-OGal), a cetyltrimethylammonium monolayer (CTA), and also to the bare sepiolite surface. Interfacial characteristics of these layers were investigated with a focus on layer packing density, hydrophilicity/hydrophobicity, and surface charge, which are being considered as key points for enzyme immobilization and stabilization of their biological activity. Cytoplasmic urease and membrane-bound cholesterol oxidase, which served as model enzymes, were immobilized on the different PC-based hybrid materials to probe their biomimetic character. Enzymatic activity was assessed by cyclic voltammetry and UV-vis spectrophotometry. The resulting enzyme/bio-organoclay hybrids were applied as active phase of a voltammetric urea biosensor and cholesterol bioreactor, respectively. Urease supported on sepiolite/BL-PC proved to maintain its enzymatic activity over several months while immobilized cholesterol oxidase demonstrated high reusability as biocatalyst. The results emphasize the good preservation of bioactivity due to the accommodation of the enzymatic system within the biomimetic lipid interface on sepiolite.

Lipid bilayer reorganization under extreme pH conditions

Supported lipid bilayers containing phosphatidylcholine headgroups are observed to undergo reorganization from a 2D fluid, lipid bilayer assembly into an array of complex 3D structures upon exposure to extreme pH environments. These conditions induce a combination of molecular packing and electrostatic interactions that can create dynamic morphologies of highly curved lipid membrane structures. This work demonstrates that fluid, single-component lipid bilayer assemblies can create complex morphologies, a phenomenon typically only associated with lipid bilayers of mixed composition.

Nonspecific adsorption of charged quantum dots on supported zwitterionic lipid bilayers: real-time monitoring by quartz crystal microbalance with dissipation

Understanding how the composition and environmental conditions of membranes influence their interactions with guest species is central to cell biology and biomedicine. We herein study the nonspecific adsorption of charged quantum dots (QDs) onto a supported zwitterionic lipid bilayer by using quartz crystal microbalance with dissipation (QCM-D). It is demonstrated that (1) the adsorption of charged QDs is charge-dependent in a way similar to but much stronger than that of the capping molecules by reason of size effect; (2) the adsorption behavior of charged QDs is dominated by electrostatic interaction, which can be well described by an "adsorption window"; (3) the "adsorption window" can be broadened by exploiting the bridge role of Ca(2+) ions; and (4) by introducing a cationic lipid into the zwitterionic lipid bilayer, one can achieve preferential adsorption of anionic QDs but suppression of the cationic QD adsorption. Our QCM-D data also indicates that these different adsorption traits effect different changes in the dissipation of supported lipid bilayers (SLBs) after adsorption of the charged QDs. The different adsorption propensities of cationic and anionic QDs on SLBs have reinforced the picture of electrostatic interactions. We believe that these findings provide important information on QD-lipid membrane interactions, which will help to develop new drug molecules and efficient drug delivery systems, and to predict and unravel their potential toxicities if any.

Stability and tribological performances of fluid phospholipid bilayers: effect of buffer and ions

We have investigated the mechanical and tribological properties of supported Dioleoyl phosphatidylcholine (DOPC) bilayers in different solutions: ultrapure water (pH 5.5), saline solution (150 mM NaCl, pH 5.8), Tris buffer (pH 7.2) and Tris saline buffer (150 mM NaCl, pH 7.2). Friction forces are measured using a homemade biotribometer. Lipid bilayer degradation is controlled in situ during friction tests using fluorescence microscopy. Mechanical resistance to indentation is measured by force spectroscopy with an atomic force microscope. This study confirms that mechanical stability under shear or normal load is essential to obtain low and constant friction coefficients. In ultrapure water, bilayers are not resistant and have poor lubricant properties. On the other hand, in Tris saline buffer, they fully resist to indentation and exhibit low (micro=0.035) and stable friction coefficient with no visible wear during the 50 min of the friction test. The unbuffered saline solution improves the mechanical resistance to indentation but not the lubrication. These results suggest that the adsorption of ions to the zwiterrionic bilayers has different effects on the mechanical and tribological properties of bilayers: higher resistance to normal indentation due to an increase in bilayer cohesion, higher lubrication due to an increase in bilayer-bilayer repulsion.

Biomimetic silica microspheres in biosensing

Lipid vesicles spontaneously fuse and assemble into a lipid bilayer on planar or spherical silica surfaces and other substrates. The supported lipid bilayers (SLBs) maintain characteristics of biological membranes, and are thus considered to be biomembrane mimetic systems that are stable because of the underlying substrate. Examples of their shared characteristics with biomembranes include lateral fluidity, barrier formation to ions and molecules, and their ability to incorporate membrane proteins into them. Biomimetic silica microspheres consisting of SLBs on solid or porous silica microspheres have been utilized for different biosensing applications. The advantages of such biomimetic microspheres for biosensing include their increased surface area to volume ratio which improves the detection limits of analytes, and their amenability for miniaturization, multiplexing and high throughput screening. This review presents examples and formats of using such biomimetic solid or porous silica microspheres in biosensing.