Shape-dependent sensitivity of single plasmonic nanoparticles for biosensing

Efficient and additive-free synthesis of morphology variant iron oxyhydroxide nanostructures for phosphate adsorption application

Iron oxyhydroxide (FeOOH) nanostructures of different shapes were successfully synthesized on flexible textile cloth of polyester using a novel and simple technique based on hydrolysis method. The technique used herein is newly designed specifically to improve the efficiency in terms of energy, simplicity and cost involved in large scale synthesis of nanostructured thin films. Additionally, the morphology of nano-sized iron oxyhydroxide could be tuned into different shapes through variation in the type of precursors used for synthesis. The uniformity and adhesion of the depositions were also found to be excellent as examined by qualitative techniques. The as-deposited samples exhibited monoclinic and orthorhombic structures of FeOOH. A significant variation in the shape of as-deposited FeOOH nanostructures with change in precursor was observed through morphological studies, which displayed lance-shaped, rounded clusters and rod-like growth features in different cases. The nanocrystalline FeOOH can be directly applied to attract and trap phosphate from water reservoirs, thus contributing to environmental solutions. The proposed technique can also be utilized to deposit larger areas, which could be suitable for practical applications.

Colorimetric immunosensor for determination of prostate specific antigen using surface plasmon resonance band of colloidal triangular shape gold nanoparticles

In this work, we demonstrated the development of a colorimetric immunosensor using surface plasmon resonance band of gold nanoparticles for the detection of prostate specific antigen (PSA). To develop this biosensing tool, triangular gold nanoparticles (AuNPs) were synthesized using Tween-20 as a nonionic surfactant and then, conjugated with PSA capture antibody (Ab₁-AuNPs). When exposed to Ab₁-AuNPs, PSA antigens were found to be successfully captured by nanosystem (PSA)-Ab₁-AuNPs. Next, (PSA)-Ab₁-AuNPs were incubated with second PSA antibody (2)-decorated magnetite (Fe₃O₄-Ab₂) and separated by an external magnetic force to leave Ab₁-AuNPs in the supernatant solution to be directly analyzed using UV-Vis spectroscopy. It was found that the absorption intensity was directly proportional to the PSA concentration. As a result, the linear range for PSA detection was found to be 0.01-20 ng mL^-1 with a detection limit of 0.009 ng mL^-1. Because of significant stability of the prepared Ab₁-AuNPs and excellent selectivity to the PSA antigen, this simple and sensitive sensing system is proposed to be potentially effective in the fast and real-time analysis of clinical samples from prostate cancer patients. We believe that the simple platform of this immunosensor to be useful in the development of future point-of-care sensing tools, working on the quantification of biomarkers in a drop of blood.

Dark-Field Microwells toward High-Throughput Direct miRNA Sensing with Gold Nanoparticles

MicroRNA (miRNA) is a class of short RNA that is emerging as an ideal biomarker, as its expression level has been found to correlate with different types of diseases including diabetes and cancer. The detection of miRNA is highly beneficial for early diagnostics and disease monitoring. However, miRNA sensing remains difficult because of its small size and low expression levels. Common techniques such as quantitative real-time polymerase chain reaction (qRT-PCR), in situ hybridization and Northern blotting have been developed to quantify miRNA in a given sample. Nevertheless, these methods face common challenges in point-of-care practice as they either require complicated sample handling and expensive equipment, or suffer from low sensitivity. Here we present a new tool based on dark-field microwells to overcome these challenges in miRNA sensing. This miniaturized device enables the readout of a gold nanoparticle assay without the need of a dark-field microscope. We demonstrate the feasibility of the dark-field microwells to detect miRNA in both buffer solution and cell lysate. The dark-field microwells allow affordable miRNA sensing at a high throughput which make them a promising tool for point-of-care diagnostics.

Optical attenuation of plasmonic nanocomposites within photonic devices

Plasmonic nanostructures enable microscopic optical manipulation such as light trapping in photonic devices. However, integration of embedded nanostructures into photonic devices has been limited by tractability of nanoscale and microscale descriptions in device architectures. This work uses a linear algebraic model to distinguish geometric optical responses of nanoparticles integrated into dielectric substrates interacting with macroscopic back-reflectors from absorptive and nonlinear plasmonic effects. Measured transmission, reflection, and attenuation (losses) from ceramic and polymer composites supporting two- and three-dimensional distributions of gold nanoparticles, respectively, are predictable using the model. A unique equilateral display format correlates geometric optical behavior and attenuation to nanoparticle density and back-reflector opacity, allowing intuitive, visual specification of density and opacity necessary to obtain a particular optical performance. The model and display format are useful for facile design and integration of plasmonic nanostructures into photonic devices for light manipulation.

Shape effect on a single-nanoparticle-based plasmonic nanosensor

Plasmonic refractometric nanosensors based on single nanostructures, i.e. spherical, nanorodand bipyramid-shaped gold nanoparticles, are investigated and compared numerically by employing the finite-difference time-domain method. The results show that the plasmonic sensing ability is distributed anisotropically around the nanorod and bipyramid, even for spherical nanoparticles when the illumination light is linearly polarized. To optimize nanosensor performance, some anisotropy in the shape of nanoparticles is required, this latter serving as an intrinsic light polarization filter to suppress the disturbance from localized surface plasmon resonance in other directions. The plasmonic near-field can be engineered by controlling the shape to achieve a concentrated and localized electromagnetic field, in direct relation with the sensing ability. Taking these factors into account, the gold bipyramid nanoconstruct which is easily available in experiment is proposed as an efficient plasmonic sensing platform. The bipyramid presents both highly localized sensitivity and high scattering cross-section, thus avoiding the trade-off during the selection of the widely used nanorod-shaped sensors. The parameters of the bipyramid structure can be optimized by numerical simulation to improve the plasmonic sensing. Our findings permit a deeper understanding of single-nanoparticle-sensor behavior, and the study provides an opportunity to optimize the plasmonic sensor.

Sensoric potential of gold-silver core-shell nanoparticles

The sensitivities of five different core-shell nanostructures were investigated towards changes in the refractive index of the surrounding medium. The shift of the localized surface plasmon resonance (LSPR) maximum served as a measure of the (respective) sensitivity. Thus, gold-silver core-shell nanoparticles (NPs) were prepared with different shell thicknesses in a two-step chemical process without the use of any (possibly disturbing) surfactants. The measurements were supported by ultramicroscopic images in order to size the resulting core-shell structures. When compared to sensitivities of nanostructures reported in the literature with those of the (roughly spherical) gold-silver core-shell NPs, the latter showed comparable (or even higher) sensitivities than gold nanorods. The experimental finding is supported by theoretical calculation of optical properties of such core-shell NP. Extinction spectra of ideal spherical and deformed core-shell NPs with various core/shell sizes were calculated, and the presence of an optimal silver shell thickness with increased sensitivity was confirmed. This effect is explained by the existence of two overlapping plasmon bands in the NP, which change their relative intensity upon change of refractive index. Results of this research show a possibility of improving LSPR sensor by adding an extra metallic layer of certain thickness.

Direct writing of large-area plasmonic photonic crystals using single-shot interference ablation

We report direct writing of metallic photonic crystals (MPCs) through a single-shot exposure of a thin film of colloidal gold nanoparticles to the interference pattern of a single UV laser pulse before a subsequent annealing process. This is defined as interference ablation, where the colloidal gold nanoparticles illuminated by the bright interference fringes are removed instantly within a timescale of about 6 ns, which is actually the pulse length of the UV laser, whereas the gold nanoparticles located within the dark interference fringes remain on the substrate and form grating structures. This kind of ablation has been proven to have a high spatial resolution and thus enables successful fabrication of waveguided MPC structures with the optical response in the visible spectral range. The subsequent annealing process transforms the grating structures consisting of ligand-covered gold nanoparticles into plasmonic MPCs. The annealing temperature is optimized to a range from 250 to 300 °C to produce MPCs of gold nanowires with a period of 300 nm and an effective area of 5 mm in diameter. If the sample of the spin-coated gold nanoparticles is rotated by 90° after the first exposure, true two-dimensional plasmonic MPCs are produced through a second exposure to the interference pattern. Strong plasmonic resonance and its coupling with the photonic modes of the waveguided MPCs verifies the success of this new fabrication technique. This is the simplest and most efficient technique so far for the construction of large-area MPC devices, which enables true mass fabrication of plasmonic devices with high reproducibility and high success rate.

Single plasmonic nanoparticles for biosensing

Along with remarkable progress of nanoplasmonics over the past 10 years, single plasmonic nanoparticle sensors have introduced a completely new dimension to the sensing scale, considering that nanoparticles are comparable in size to biomolecules such as nucleic acids or antibodies. Single particle sensing methods have recently shown the possibility of detecting the adsorption of single biomolecules, and have already provided information about conformational changes of single molecules. For practical application, arrays of such compact sensor units are expected to realize massive multiplexing and high throughput in diagnostics and drug discovery in the near future. In this review, recent achievements and perspectives of this emerging biosensing technique are discussed.

Metallic nanodot arrays by stencil lithography for plasmonic biosensing applications

The fabrication of gold nanodots by stencil lithography and its application for optical biosensing based on localized surface plasmon resonance are presented. Arrays of 50-200 nm wide nanodots with different spacing of 50-300 nm are fabricated without any resist, etching, or lift-off process. The dimensions and morphology of the nanodots were characterized by scanning electron and atomic force microscopy. The fabricated nanodots showed localized surface plasmon resonance in their extinction spectra in the visible range. The resonance wavelength depends on the periodicity and dimensions of the nanodots. Bulk refractive index measurements and model biosensing of streptavidin were successfully performed based on the plasmon resonance shift induced by local refractive index change when biomolecules are adsorbed on the nanodots. These results demonstrate the potential of stencil lithography for the realization of plasmon-based biosensing devices.