Multispectral near-infrared reflectance and transillumination imaging of occlusal carious lesions: Variation in lesion contrast with lesion depth

Evaluating interproximal and occlusal lesion severity with a dual SWIR transillumination/reflectance probe

We have developed a clinical probe capable of acquiring simultaneous, multispectral short wavelength infrared (SWIR) reflectance and occlusal transillumination images of lesions on tooth proximal and occlusal surfaces to reduce the potential of false positives and enhance diagnosis. The dual probe was 3D printed and the imaging system uses an InGaAs camera and broadband light sources at 1310 nm for occlusal transillumination and 1600 nm for cross-polarization reflectance measurements. In this study a mathematical model to estimate the penetration depth of "hidden" occlusal lesions from the SWIR images was developed. We compared the model's estimated lesion depth on 18 extracted teeth with lesions against microCT measurements. Although the model estimated depth deviates from that measured in microCT at higher depths, there is a good linear correlation (R² = 0.93) between the estimated depth from SWIR images and the measured depth using microCT. SWIR occlusal transillumination images at 1300 nm also provide information about interproximal lesion penetration depth which can be directly viewed from the occlusal surface. SWIR occlusal transillumination and reflectance depth measurements on 49 natural interproximal lesions were compared with microCT measurements. There was significant correlation between the depths measured with SWIR occlusal transillumination (R² = 0.81) and reflectance (R² = 0.19) compared with the depths measured with microCT.

Compact in vivo handheld dual SWIR transillumination/reflectance imaging system for the detection of proximal and occlusal lesions

We have developed a clinical probe capable of acquiring simultaneous short wavelength infrared (SWIR) cross-polarized reflectance and occlusal transillumination images of lesions on tooth proximal and occlusal surfaces. We hypothesize that the dual SWIR reflectance and transillumination probe will improve the diagnostic accuracy of the device by reducing false positives since it is unlikely that confounding structural features or specular reflection are going to be present in both reflectance and transillumination images. In addition, the dual probe will provide complementary diagnostic information about lesion severity to help discriminate early superficial lesions on tooth surfaces from deeply penetrating lesions. The dual probe was 3D printed and equipped with a compact InGaAs camera and broadband superluminescent diode light sources that emit broadband light at 1300 nm for occlusal transillumination and 1600 nm light for cross-polarization reflectance measurements. The first clinical images acquired using this novel probe are presented.

Dual short wavelength infrared transillumination/reflectance mode imaging for caries detection

SIGNIFICANCE

We have developed a clinical probe capable of acquiring near-simultaneous short-wavelength infrared (SWIR) reflectance and occlusal transillumination images of lesions on tooth proximal and occlusal surfaces. We hypothesize that dual images will aid in differentiating between shallow and deep occlusal lesions and reduce the potential of false positives (FPs).

AIM

The aim of this study was to test the performance of the dual reflectance and occlusal transillumination probe on extracted teeth prior to commencing clinical studies.

APPROACH

The dual probe was 3D printed and the imaging system uses an InGaAs camera and broadband superluminescent diode light sources that emit broadband light at 1300 nm for occlusal transillumination and 1600-nm light for cross-polarization reflectance. The diagnostic performance of the dual probe was assessed using 120 extracted teeth with approximal and occlusal lesions. Reflectance and transillumination images were fused into single images to enhance the contrast between sound and lesion areas. The lesion contrast in both modes did not increase significantly with either the lesion depth or the distance from the occlusal surface for approximal lesions. In addition, the diagnostic performance of radiography, the individual reflectance and transillumination images, dual images, and fused images were compared using micro-computed tomography as the gold standard.

RESULTS

Reflectance imaging at 1600 nm yielded the highest diagnostic accuracy for lesions on both occlusal and proximal surfaces while radiography yielded the lowest number of FPs.

CONCLUSION

This study demonstrates that simultaneous acquisition of both reflectance and transillumination SWIR images is possible with a single clinical device.

A dual handheld SWIR transillumination/reflectance probe for imaging lesions on tooth occlusal and proximal surfaces

We developed a clinical probe capable of acquiring simultaneous short wavelength infrared (SWIR) reflectance and occlusal transillumination images of lesions on tooth proximal and occlusal surfaces to reduce the potential of false positives. The dual probe is 3D-printed and the imaging system uses a Ge-enhanced camera and fiber-optic light sources that use SWIR light at 1300-nm for occlusal transillumination and SWIR 1450-nm light for reflectance measurements. The purpose of this study was to test the performance of the probe on extracted teeth prior to commencing clinical studies. The dual probe was used to image extracted teeth with proximal and occlusal lesions. SWIR images of each tooth were compared with micro-CT images to assess performance.