A novel magnetic method for examination of bowel motility

Miniature magneto-mechanical resonators for wireless tracking and sensing

Sensor miniaturization enables applications such as minimally invasive medical procedures or patient monitoring by providing process feedback in situ. Ideally, miniature sensors should be wireless, inexpensive, and allow for remote detection over sufficient distance by an affordable detection system. We analyze the signal strength of wireless sensors theoretically and derive a simple design of high-signal resonant magneto-mechanical sensors featuring volumes below 1 cubic millimeter. As examples, we demonstrate real-time tracking of position and attitude of a flying bee, navigation of a biopsy needle, tracking of a free-flowing marker, and sensing of pressure and temperature, all in unshielded environments. The achieved sensor size, measurement accuracy, and workspace of ~25 centimeters show the potential for a low-cost wireless tracking and sensing platform for medical and nonmedical applications.

Dissolution of magnetically marked tablets: investigations in a physical phantom

Pharmacological research is strongly driven by maximizing the bioavailability of new pharmaceuticals. For orally applied drugs the bioavailability highly depends on the process of dissolution in the gastrointestinal tract and is affected by numerous physiological and environmental factors. Available techniques for in vivo monitoring of the dissolution process are very limited and not applicable for large studies. The technique of magnetic marker monitoring provides new prospects for these investigations. However, it is currently limited due to low fields common magnetic markers produce. Hence, only highly sensitive sensors are applicable. In this paper, we performed dissolution tests of novel markers in a physical phantom with magnetoresistive sensors in an unshielded environment. The markers were continuously localized and the movement through the phantom was tracked. By analyzing the changing magnetic moment of the markers we were able to monitor the progress of dissolution in the phantom. We conclude that our proposed phantom and tracking technique is an important step towards new systems for in vivo monitoring of pharmaceutical dissolution processes.

A novel marker design for magnetic marker monitoring in the human gastrointestinal tract

Magnetic marker monitoring (MMM) is a technique to determine the motility of the gastrointestinal tract and to observe the dissolution of pharmaceutical compounds. Today's magnetic markers usually consist of magnetized magnetite. Because of their weak magnetic fields, highly sensitive sensor systems are required. For a wider class of applications, stronger markers and more flexible measurement setups are necessary. In this paper, a novel marker design is introduced. This marker comprises one permanent magnet and a compartment of iron powder in a magnetically unstable configuration. During dissolution of the pharmaceuticals, the powder is redistributed around the magnet, thereby altering the externally measured magnetic induction. Based on this design, magnetically marked tablets and capsules were prepared and their magnetic field during dissolution was observed. Magnetic induction values were between 16 and 0.2  μT at distances of 5-30  cm, which is considerably higher compared to the pico-Tesla range of conventional markers. During dissolution, the magnetic induction decreased by between 14% and 27%. These values could be confirmed in detailed finite element method simulations. In conclusion, the present results indicate that our novel marker design is well suited for MMM with more flexible sensor technologies, such as magnetoresistive sensors.

[Dosimetric impact of the 2D motion of a platform simulating breathing during a dynamic mode treatment]

Breathing-adapted techniques in external radiotherapy lead to the improvement of the taken into account of the tumour motion during the patient treatment. Indeed, this motion involves dosimetric uncertainties, in particular during a dynamic treatment (intensity-modulated radiation therapy, dynamic wedge...). As tumoral movement is complex and is carried out in various directions of space, a dynamic platform moving in one or two plans was conceived. This article approaches the technical aspects of design and functioning of this prototype. A study of the dosimetric effects of the respiratory movement on one and two plans during a dynamic treatment without gating will be presented. Films were irradiated while varying the rates with wedged fields at various speeds. The penumbra of beams were compared with the static case and appeared twice broader in the majority of the cases. The results highlighted the contributions of the longitudinal and the axial components of the motion on the form of the dose distribution. These results were completed with gamma index measurements to determine an internal margin. Moreover, this platform proves to be a promising tool for breathing-adapted treatment, in particularly to test the synchronisation of RPM system in fluoroscopic mode in board imaging system.