A novel strategy to increase heating efficiency in a split-focus ultrasound phased array

Fast and high temperature hyperthermia coupled with radiotherapy as a possible new treatment for glioblastoma

Background

A new transcranial focused ultrasound device has been developed that can induce hyperthermia in a large tissue volume. The purpose of this work is to investigate theoretically how glioblastoma multiforme (GBM) can be effectively treated by combining the fast hyperthermia generated by this focused ultrasound device with external beam radiotherapy.

Methods/Design

To investigate the effect of tumor growth, we have developed a mathematical description of GBM proliferation and diffusion in the context of reaction–diffusion theory. In addition, we have formulated equations describing the impact of radiotherapy and heat on GBM in the reaction–diffusion equation, including tumor regrowth by stem cells. This formulation has been used to predict the effectiveness of the combination treatment for a realistic focused ultrasound heating scenario.

Our results show that patient survival could be significantly improved by this combined treatment modality.

Discussion

High priority should be given to experiments to validate the therapeutic benefit predicted by our model.

Electronic supplementary material

The online version of this article (doi:10.1186/s40349-016-0078-3) contains supplementary material, which is available to authorized users.

A study of heating duration and scanning path in focused ultrasound surgery

A conventional method of avoiding normal tissue overheating during focused ultrasound surgery (FUS) is to apply equal heating duration for each sonication in between cooling intervals. However, this method is time-consuming and expensive. A novel method with unequal heating duration in different scanning paths without cooling intervals was investigated in this paper. This method was compared with the conventional method through the ablation of a 10 × 10 cm(2) target. The simulation results indicated that the new method was able to reduce treatment time by more than 50%, with higher than 95% coverage index, and more uniform thermal dose distribution. The method was further verified through the ablation of a circular lesion. Ex vivo experiments were also performed to confirm the simulation results. Both simulation and experimental results have proven that the new method can increase heating efficiency, and are a promising new approach in FUS.

SonoKnife: feasibility of a line-focused ultrasound device for thermal ablation therapy

PURPOSE

To evaluate the feasibility of line-focused ultrasound for thermal ablation of superficially located tumors.

METHODS

A SonoKnife is a cylindrical-section ultrasound transducer designed to radiate from its concave surface. This geometry generates a line-focus or acoustic edge. The motivation for this approach was the noninvasive thermal ablation of advanced head and neck tumors and positive neck nodes in reasonable treatment times. Line-focusing may offer advantages over the common point-focusing of spherically curved radiators such as faster coverage of a target volume by scanning of the acoustic edge. In this paper, The authors report studies using numerical models and phantom and ex vivo experiments using a SonoKnife prototype.

RESULTS

Acoustic edges were generated by cylindrical-section single-element ultrasound transducers numerically, and by the prototype experimentally. Numerically, simulations were performed to characterize the acoustic edge for basic design parameters: transducer dimensions, line-focus depth, frequency, and coupling thickness. The dimensions of the acoustic edge as a function of these parameters were determined. In addition, a step-scanning simulation produced a large thermal lesion in a reasonable treatment time. Experimentally, pressure distributions measured in degassed water agreed well with acoustic simulations, and sonication experiments in gel phantoms and ex vivo porcine liver samples produced lesions similar to those predicted with acoustic and thermal models.

CONCLUSIONS

Results support the feasibility of noninvasive thermal ablation with a SonoKnife.