Effect of the local energy distribution of x-ray beams generated through inverse Compton scattering in dual-energy imaging applications

X-ray sources based on the inverse Compton interaction between a laser and a relativistic electron beam are emerging as a promising compact alternative to synchrotron for the production of intense monochromatic and tunable radiation. The emission characteristics enable several innovative imaging techniques, including dual-energy K-edge subtraction (KES) imaging. The performance of these techniques is optimal in the case of perfectly monochromatic x-ray beams, and the implementation of KES was proven to be very effective with synchrotron radiation. Nonetheless, the features of inverse Compton scattering (ICS) sources make them good candidates for a more compact implementation of KES techniques. The energy and intensity distribution of the emitted radiation is related to the emission direction, which means different beam qualities in different spatial positions. In fact, as the polar angle increases, the average energy decreases, while the local energy bandwidth increases and the emission intensity decreases. The scope of this work is to describe the impact of the local energy distribution variations on KES imaging performance. By means of analytical simulations, the reconstructed signal, signal-to-noise ratio, and background contamination were evaluated as a function of the position of each detector pixel. The results show that KES imaging is possible with ICS x-ray beams, even if the image quality slightly degrades at the detector borders for a fixed collimation angle and, in general, as the beam divergence increases. Finally, an approach for the optimization of specific imaging tasks is proposed by considering the characteristics of a given source.

BriXS, a new X-ray inverse Compton source for medical applications

MariX is a research infrastructure conceived for multi-disciplinary studies, based on a cutting-edge system of combined electron accelerators at the forefront of the world-wide scenario of X-ray sources. The generation of X-rays over a large photon energy range will be enabled by two unique X-ray sources: a Free Electron Laser and an inverse Compton source, called BriXS (Bright compact X-ray Source). The X-ray beam provided by BriXS is expected to have an average energy tunable in the range 20-180 keV and intensities between 10¹¹ and 10¹³ photon/s within a relative bandwidth ΔE/E=1-10%. These characteristics, together with a very small source size (~20 μm) and a good transverse coherence, will enable a wide range of applications in the bio-medical field. An additional unique feature of BriXS will be the possibility to make a quick switch of the X-ray energy between two values for dual-energy and K-edge subtraction imaging. In this paper, the expected characteristics of BriXS will be presented, with a particular focus on the features of interest to its possible medical applications.

Quantitative contrast-enhanced mammography for contrast medium kinetics studies

Quantitative contrast-enhanced mammography, based on a dual-energy approach, aims to extract quantitative and temporal information of the tumour enhancement after administration of iodinated vascular contrast media. Simulations using analytical expressions and optimization of critical parameters essential for the development of quantitative contrast-enhanced mammography are presented. The procedure has been experimentally evaluated using a tissue-equivalent phantom and an amorphous silicon active matrix flat panel imager. The x-ray beams were produced by a tungsten target tube and spectrally shaped using readily available materials. Measurement of iodine projected thickness in mg cm(-2) has been performed. The effect of beam hardening does not introduce nonlinearities in the measurement of iodine projected thickness for values of thicknesses found in clinical investigations. However, scattered radiation introduces significant deviations from slope equal to unity when compared with the actual iodine projected thickness. Scatter correction before the analysis of the dual-energy images provides accurate iodine projected thickness measurements. At 10% of the exposure used in clinical mammography, signal-to-noise ratios in excess of 5 were achieved for iodine projected thicknesses less than 3 mg cm(-2) within a 4 cm thick phantom. For the extraction of temporal information, a limited number of low-dose images were used with the phantom incorporating a flow of iodinated contrast medium. The results suggest that spatial and temporal information of iodinated contrast media can be used to indirectly measure the tumour microvessel density and determine its uptake and washout from breast tumours. The proposed method can significantly improve tumour detection in dense breasts. Its application to perform in situ x-ray biopsy and assessment of the oncolytic effect of anticancer agents is foreseeable.