Magneto-Acoustic Theranostic Approach: Integration of Magnetomotive Ultrasound Shear Wave Elastography and Magnetic Hyperthermia

OBJECTIVES

Although magnetically induced hyperthermia has shown great efficiency in the treatment of solid tumors, it is still a challenge to avoid incomplete ablation or overtreatment. In this study, we applied magnetomotive ultrasound shear wave elastography (MMUS-SWE) as a tool for real-time image guidance and feedback in the magnetic hyperthermia (MH) process. We called this new method as magneto-acoustic theranostic approach (MATA).

METHODS

In MATA, a ferromagnetic particle (fMP) was simultaneously used as a thermoseed for MH and a shear wave source for MMUS-SWE. The fMP was excited by a high-frequency magnetic field to induce the heating effect for MH. Meanwhile, the fMP was stimulated by a pulsed magnetic field to generate shear wave propagation for MMUS-SWE. Thus, the changes in elastic modulus surrounding fMP can be used to estimate the therapy effect of MH.

RESULTS

The phantom and in vitro experiments were conducted to verify the feasibility of MATA, which has good performance in magnetothermal conversion and treatment efficacy feedback. The shear wave speed of the isolated pork liver changed significantly after the MH process, which varied from about 1.36 to 4.85 m/s.

CONCLUSIONS

Preliminary results proved that changes in elastic modulus could be useful to estimate the therapy effect of MH. We expect that MATA, which is the integration of MMUS-SWE and MH, will be a novel theranostic method for clinical translation.

Optimization and experimental characterization of the innovative thermo-brachytherapy seed for prostate cancer treatment

BACKGROUND

Adjuvant administration of hyperthermia (HT) with radiation therapy in the treatment of cancer has been extensively studied in the past five decades. Concurrent use of the two modalities leads to both complementary and synergetic enhancements in tumor management, but presents a practical challenge. Their simultaneous administration using the same implantable thermo-brachytherapy (TB) seed source has been established theoretically through magnetically mediated heat induction with ferromagnetic materials. Careful consideration, however, showed that regular ferromagnetic alloys lack the required conductivity to generate enough power through eddy current to overcome heat dissipation due to blood perfusion at clinically measured rates.

PURPOSE

We characterized the TB implant that combines a sealed radioactive source with a ferrimagnetic ceramic (ferrite) core, serving as a self-regulating HT source when placed in an alternating electromagnetic field. To increase the heat production and uniformity of temperature distribution the empty spacers between radioisotope seeds were replaced by hyperthermia-only (HT-only) seeds.

METHODS

The heat generation due to eddy currents circulating in the seed's thin metal shell, surrounding the core, depends drastically on the core permeability. We identified a soft ferrite material (MnZnFe 2 O 4 $\rm MnZnFe_2O_4$ ) as the best candidate for the core, owing to its high permeability, the HT-range Curie temperature, adjustable through material composition, and a sharp Curie transition, leading to heat self-regulation, with no invasive thermometry required. The core permeability as a function of temperature was calculated based on measured resistor-inductor (RL) circuit parameters and material B-H curves. The thickness of the shell was optimized separately for TB and HT-only seeds, having slightly different dimensions. Heat generation was calculated using the power versus temperature approximation. Finally, the temperature distribution for a realistic prostate LDR brachytherapy plan was modeled with COMSOL Multiphysics for a set of blood perfusion rates found in the literature.

RESULTS

The small size of the investigated ferrite core samples resulted in demagnetization significantly decreasing the relative permeability from its intrinsic value of ∼5000 to about 11 in the range of magnetic field amplitude and frequency values relevant to HT. The power generated by the seed dropped sharply as the shell thickness deviated from the optimal value. The optimized TB and HT-only seeds generated 45 and 267 mW power, respectively, providing a HT source sufficient for >90% volume coverage even for the highest blood perfusion rates. The toxicity of the surrounding normal tissues was minimal due to the rapid temperature fall off within a few millimeters distance from a seed.

CONCLUSIONS

The investigated TB and HT-only seed prototypes were shown to provide sufficient power for the concurrent administration of radiation and HT. In addition to being used as a source for both radiation and heat at the onset of cancer therapy, these implanted seeds would be available for treatment intensification in the setting of salvage brachytherapy for locally radiorecurrent disease, possibly as a sensitizer to systemic therapies or as a modulator of the immune response, without another invasive procedure. Experimentally determined parameters of the ferrite material cores provided in this study establish a mechanistic foundation for future pre-clinical and clinical validation studies.

Evaluation of Thermal Properties of Ferromagnetic Core for Treatment of Solid Tumors by Electromagnetic Induction Hyperthermia

Background

Electromagnetic induction hyperthermia is a promising method to treat the deep-seated tumors such as brain and prostatic tumors. This technique is performed using the induction of electromagnetic waves in the ferromagnetic cores implanted at the solid tumor.

Objective

This study aims at determining the conditions of the optimal thermal distribution in the different frequencies before performing the in vitro cellular study.

Material and Methods

In this experimental study, the i-Cu alloy (70.4-29.6; wt%) was prepared and characterized and then the parameters, affecting the amount of induction heating in the ferromagnetic core, were investigated. Self-regulating cores in 1, 3, 6, and 9 arrangements in the water phantom with a volume of 2 cm3 were used as a replacement for solid tumor.

Results

Inductively Coupled Plasma (ICP) analysis and Energy Dispersive X-ray Spectroscopy (EDS) show the uniformity of the alloy after 4 times remeling by vacuum arc remelting furnace. The Vibrating Sample Magnetometer (VSM) shows that the Curie temperature (TC) of the ferromagnetic core is less than 50 °C. Temperature profile with a frequency of 100-400 kHz for 30 min, was extracted by infrared imaging camera, indicating the increase temperature in the range of 42 °C to 46 °C.

Conclusion

The optimum conditions with used hyperthermia system are supplied in the frequency of 100 kHz, 200 kHz and 400 kHz with 6, 3 and 1 seeds, respectively. It is also possible to induce a temperature up to 50 °C by increasing the number of seeds at a constant frequency and power, or by increasing the applied frequency at a constant number of seeds.

Implantable chemothermal brachytherapy seeds: A synergistic approach to brachytherapy using polymeric dual drug delivery and hyperthermia for malignant solid tumor ablation

Chemothermal brachytherapy seeds have been developed using a combination of polymeric dual drug chemotherapy and alternating magnetic field induced hyperthermia. The synergistic effect of chemotherapy and hyperthermia brachytherapy has been investigated in a way that has never been performed before, with an in-depth analysis of the cancer cell inhibition property of the new system. A comprehensive in vivo study on athymic mice model with SCC7 tumor has been conducted to determine optimal arrays and specifications of the chemothermal seeds. Dual drug chemotherapy has been achieved via surface deposition of polydopamine that carries bortezomib, and also via loading an acidic pH soluble hydrogel that contains 5-Fluorouracil inside the chemothermal seed; this increases the drug loading capacity of the chemothermal seed, and creates dual drug synergism. An external alternating magnetic field has been utilized to induce hyperthermia conditions, using the inherent ferromagnetic property of the nitinol alloy used as the seed casing. The materials used in this study were fully characterized using FESEM, H¹ NMR, FT-IR, and XPS to validate their properties. This new approach to experimental cancer treatment is a pilot study that exhibits the potential of thermal brachytherapy and chemotherapy as a combined treatment modality.

Use of novel thermobrachytherapy seeds for realistic prostate seed implant treatments

PURPOSE

A practical means of delivering both therapeutic radiation and hyperthermia to a deep-seated target has been identified in the literature as highly desirable, provided it is capable of generating sufficient temperatures over the defined target volume. The authors present continued development of a dual-modality thermobrachytherapy (TB) seed, investigating its capabilities in delivering prescribed hyperthermia to realistic deep-seated targets.

METHODS

The TB seed is based on the ubiquitous low dose-rate (LDR) brachytherapy permanent implant. Heat is generated by incorporating a ferromagnetic core within the seed and placing the patient in an oscillating external magnetic field, producing eddy currents within the core and hence Joule heating. A strategically selected Curie temperature results in thermal self-regulation. The magnetic and thermal properties of the TB seed were studied experimentally by means of seed prototypes placed in a tissue-mimicking phantom and heated with an industrial induction heater, as well as computationally in the finite element analysis solver COMSOL Multiphysics. Patient-specific seed distributions derived from LDR permanent prostate implants previously conducted at their institution were modeled in COMSOL to evaluate their ability to adequately cover a defined target volume and to overcome the loss of heat due to blood perfusion within tissue. The calculated temperature distributions were analyzed by generating temperature-volume histograms, which were used to quantify coverage and temperature homogeneity for varied blood perfusion rates, seed Curie temperatures, and thermal power production rates. Use of additional hyperthermia-only (HT-only) seeds in unused spots within the implantation needles was investigated, as was an increase in these seeds' core size to increase their power. The impact of the interseed attenuation and scatter (ISA) effect on radiation dose distributions of this seed was also quantified by Monte Carlo studies in the software package Monte Carlo N-Particle Version 5.

RESULTS

Increasing the power production of the seeds, as well as increasing their Curie point, would increase the maximum blood perfusion rate that a given seed distribution could overcome to obtain an acceptable temperature distribution. However, this would also increase the maximum temperatures generated at the seed surfaces. Auxiliary HT-only seeds serve to improve the temperature uniformity within the target, as well as decrease the seed power generation requirements. Both an increase in their core size and an increase in both seed types' Curie temperatures enhance the resulting temperature coverage. The interseed and scatter effect caused by both the TB and HT-only seeds was found to reduce the dose to 90% of the target volume (D90) by a factor of 1.10 ± 0.02.

CONCLUSIONS

A systematic approach of combining LDR prostate brachytherapy with hyperthermia is described, and its ability to provide sufficient and uniform temperature distributions in realistic patient-specific implants evaluated. A combination of TB and HT-only seeds may be used to produce a uniform temperature distribution in a defined target. Various modeled changes to their design, such as optimization of their Curie temperature, improve their ability to overcome the thermal effects of blood perfusion. The enhanced ISA of the TB and HT-only seeds must be taken into account for dose calculations, but is manageable.

Practical considerations for maximizing heat production in a novel thermobrachytherapy seed prototype

PURPOSE

A combination of hyperthermia and radiation in the treatment of cancer has been proven to provide better tumor control than radiation administered as a monomodality, without an increase in complications or serious toxicities. Moreover, concurrent administration of hyperthermia and radiation displays synergistic enhancement, resulting in greater tumor cell killing than hyperthermia and radiation delivered separately. The authors have designed a new thermobrachytherapy (TB) seed, which serves as a source of both radiation and heat for concurrent brachytherapy and hyperthermia treatments when implanted in solid tumors. This innovative seed, similar in size and geometry to conventional seeds, will have self-regulating thermal properties.

METHODS

The new seed's geometry is based on the standard BEST Model 2301(125)I seed, resulting in very similar dosimetric properties. The TB seed generates heat when placed in an oscillating magnetic field via induction heating of a ferromagnetic Ni-Cu alloy core that replaces the tungsten radiographic marker of the standard Model 2301. The alloy composition is selected to undergo a Curie transition near 50 °C, drastically decreasing power production at higher temperatures and providing for temperature self-regulation. Here, the authors present experimental studies of the magnetic properties of Ni-Cu alloy material, the visibility of TB seeds in radiographic imaging, and the ability of seed prototypes to uniformly heat tissue to a desirable temperature. Moreover, analyses are presented of magnetic shielding and thermal expansion of the TB seed, as well as matching of radiation dose to temperature distributions for a short interseed distance in a given treatment volume.

RESULTS

Annealing the Ni-Cu alloy has a significant effect on its magnetization properties, increasing the sharpness of the Curie transition. The TB seed preserves the radiographic properties of the BEST 2301 seed in both plain x rays and CT images, and a preliminary experiment demonstrates thermal self-regulation and adequate heating of a tissue-mimicking phantom by seed prototypes. The effect of self-shielding of the seed against the external magnetic field is small, and only minor thermal stress is induced in heating of the seeds from room temperature to well above the seed operating temperature. With proper selection of magnetic field parameters, the thermal dose distribution of an arrangement of TB and hyperthermia-only seeds may be made to match with its radiation dose distribution.

CONCLUSIONS

The presented analyses address several practical considerations for manufacturing of the proposed TB seeds and identify critical issues for the prototype implementation. The authors' preliminary experiments demonstrate close agreement with the modeling results, confirming the feasibility of combining sources of heat and radiation into a single thermobrachytherapy seed.